Why This Tiny Engine Can Go 200mph

Подписаться 9 млн

Просмотров 2,2 млн

50% 1

Thanks to Valvoline for sponsoring today’s video! Click here bit.ly/ValvolineExtendedProtec... and get the ultimate protection for your engine!
We took apart a Hayabusa engine to find out how this tiny engine is capable of deadly speeds… and then tried to put it back together. Easy, right?
Donut = We like cars, and we like making videos about cars. Hopefully our videos make you like cars too.
Subscribe for +50hp
Notification bell for +100hp
Get a Donut shirt ►www.donut.media/
Like little car collectibles? Get a STOCKY ►www.stockycars.com/
Join the Donut Underground: / @donut
Like working on vehicles? Subscribe to Real Mechanic Stuff! / @realmechanicstuff
Also our instagram has good memes: / donutmedia

Авто/Мото

Опубликовано:

29 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,7 тыс.

@saintofall3653 6 месяцев назад

Now, put this engine in the Chang Li, and make a 200hp sports mini truck. That's the only logical thing to do at this point.

@TheLiamis 6 месяцев назад

It has to be done.

@stevesucio7790 6 месяцев назад

The Daaaaaaaaang Li

@kentowakai1234 6 месяцев назад

The only option. It must be done!

@cjinniss 6 месяцев назад

Has to be

@kerrykelly9591 6 месяцев назад

Came to comment this!

@Artak091 6 месяцев назад

Jerry out here sabotaging the bike to have an excuse to make it better. We on to you bruh and we appreciate it.😂

@1nicube 6 месяцев назад

it was probably already cracked and thats probably why they initialy disassembled it

@jamesfair9751 6 месяцев назад

No from the looks on his face he didn’t do that on purpose lol 😂

@1nicube 6 месяцев назад

@@jamesfair9751 its call TV. The face of the actor on CornHub are also fake! if you think this is real... poor you🤦‍♂️

@andoletube 6 месяцев назад

@@1nicube I think they already knew because I didn't see them putting in all the gaskets. It's mostly theatre in this episode. Why pull a motor apart and then do zero work on it, and just put it back together?

@1nicube 6 месяцев назад

@@andoletube exactly!

@aidankilleen5889 6 месяцев назад

As someone who made connecting rods for motorcycles for a good while, I think it's VERY important to look at that bushing in the rod/wrist pin and see if there's wear marks. On a motor putting out as much power as a friggin BUSA, revving as high as it does, I wouldn't be surprised if they were toast (depending on mileage/abuse), and that will blow a motor. I'm not sure how many bikes have bushings in the top end of the rods, but it's a very nice touch for very well engineered bike. ALSO 9:01 is why you tape a cloth to the top of your rods when assembling a motor like this. Any ding on the case could break a seal.

@halim1644 6 месяцев назад

busa dont rev high i think max rpm would be 11500rpm ?

@laurapalmerTDGE 5 месяцев назад

Did you notice how the engine is or was? Frequent oil changes with the right oil. Coolant etc.

@MajesticDemonLord 5 месяцев назад

I put over 100,000 Km on my Busa, she still purred like a Kitten. Granted, she was my daily ride and I didn't do track days or a lot of hard riding (a lot of filtering in heavy traffic) but I still liked to twist the wrist and have some fun now and again.

@zagrepcanin82 5 месяцев назад

true...also they didnt check bearings on con rods and crank....and lots of more things.i have just posted a comment on their sloppy work

@laurapalmerTDGE 5 месяцев назад

Indeed, for that there are other channels with less entertainment. Where they talk more about the specs and tolerances etc.@@zagrepcanin82 Indeed, for that there are other channels with less entertainment. Where they talk more about the specs and tolerances etc.

@ShadowTheSC 6 месяцев назад

It is a fast bike because of how it looks, that was Suzukis entire goal. The body fairings were extremely aerodynamic.

@mrmac302 6 месяцев назад

Jerry’s talent as a 2 wheel operator is always impressive

@aaravt6724 6 месяцев назад

smoooooth operator

@BeeaReyoU. 6 месяцев назад

Thats his bread and butter. When he first joined Donut he was there for nerd talk and never really showed love for cars like he did for bikes. Then he got his own episodes with bike themes and his spark showed. During coronavirus these two were put together to make tool comparison videos and they became close there. Warching that series you can see the chemistry grow and now these two make for a great host pair.

@mycosys 6 месяцев назад

Less impressive is not knowing the name for a crankcase and calling the block 'the cylinder'

@normiels3 6 месяцев назад

@@mycosys when you work on bikes and cars things get mixed sometimes. Such a minuscule detail to bitch ab

@MadZMax 6 месяцев назад

hell no! he does NOT have a clue of what he is doing, on the other hand, Jobe is a good mechanic with brains.

@JGSnipes 6 месяцев назад

It is technically a fast bike due to how it looks as well. Not only did it have the power but it had the areo designed specifically for top speed that other bikes lacked at the time.

@zorikos_ 6 месяцев назад

This!! Thank you! The sheer amount of aerodynamic engineering and testing behind this bodywork cannot simply be glossed over in “..but its not fast because of how it looks” when it quite literally is a huge factor.

@pallav8725 6 месяцев назад

@@zorikos_the aerodynamics were also designed to make it comfortable for the rider which many sports bike of the times were not. The hayabusa is truly a marvel of engineering.

@michaelbrinks8089 6 месяцев назад

Yup, it was performance 1st over looks 🆚 better looks with poorer performance.

@joelzylstra2971 6 месяцев назад

💯

@HalfdeadRider 6 месяцев назад

The ZX12r (the younger sister bike to my ZX9r, although mine is a Y2k bike), was a better bike all round as it could also go over 200mph unrestricted, but looked a lot nicer than the Hayabusa, subjective, but not really 🤣🤣

@Celerystinks 5 месяцев назад

I used to build injectors (massive hydraulic machines for coil tubing) and the brake system is literally the same as a hyabusa clutch. A bunch of clutch & metals plates between plates, 8 screws and springs that get released by a hydraulic ram. I am a millwright and always wanted to work on cars more and bikes. Good to know that some things translate between my job as a millwright and my wanting to work on cars n bikes more

@skinnypotato9525 6 месяцев назад

I think the ad for Valvoline was about as professional and good as it couldve possibly been. Hats off to the Donut team

@bikerboyofficials 6 месяцев назад

THIS WAS MY BIKE!! Can’t believe you guys got your hands on it! I have video proof on my channel. I had so much fun on it, it was my first “super sport” motorcycle. *EDIT* ALOT of Time & Money spent rebuilding that bike cosmetically and mechanically. It was very run down when I purchased it from its original owner. can’t wait to see what you guys do with my old girl! 🤞🏻🤟🏻

@fafscape9961 6 месяцев назад

Can confirm he is telling the truth

@datmaliboi1069 6 месяцев назад

Daaang! Ur lucky u get to watch ur own build dude. they cracked that motor tho. Good think they’re rich and can make it a beast again

@bobmarley3751 6 месяцев назад

Wow you weren’t lying

@bikerboyofficials 6 месяцев назад

@@fafscape9961 I’m shocked, I sold it to an older gentlemen, was sure he’d keep it, and now it’s on donut media. Mind blown! Lol

@naveednazer1239 6 месяцев назад

Donut media pls pin this comment

@JumpingTuna 6 месяцев назад

A maintenance manual and bagging and tagging techniques would be massively helpful with stuff like this.

@psmitty6721 6 месяцев назад

I *usually* bad & tag big jobs.. especially at work. However I recently shot myself in the foot on a person project. Oh well; I’ll get it but I wish I had. New jobs never done b4 and/or new mechanics adhere to this advice! Ziplocks and a sharpie do the trick.

@spai492 6 месяцев назад

When they said we should be looking at the manual not trying to remember how it went, I felt that. Reminded me of a rebuild with my dad, but with a lot less swearing, mumbling and busted knuckles.

@badgermetal 6 месяцев назад

I have a whole civic engine torn down and labeled in zip locks. Works great for keeping all the internal parts clean and rust free if you need to store them.

@DarkExternalHeart 6 месяцев назад

Erin approved this advice

@Maxst33le 6 месяцев назад

Bagging and tagging is a big help

@jaisongeorge2705 6 месяцев назад

I love it guys! Finally someone making the same mistakes I make. This is usually how my builds go too.

@420catson 2 месяца назад

i gotta say guys, these teardown videos are gold. ive been back to this one 4 or 5 times to help me workout a project im planning

@sixpest 6 месяцев назад

These boys are scary good at creating ads. I genuinely end up smiling after watching them.

@itshusk2421 6 месяцев назад

Because Donut Media as a brand supports Valvoline which supports Israel, I will no longer recommend a single video from your company. Think of your decisions!!!

@hazmatt_bignell 6 месяцев назад

I still skip them 🤣

@kraanialepsy 6 месяцев назад

it's so far beyond RU-vid channel ads. Some good real broadcast, TV, commercial scale now.

@SweetPotato2617 6 месяцев назад

they reimind me of late 2000s adds that youd see on tv

@daquannigamoto6717 6 месяцев назад

Shaboingboing riding SO hard right now

@abdulmoeed304 6 месяцев назад

We neeeeeeeeeeeeeeeeeeed more bike content on Dounut please

@barouqa 6 месяцев назад

I love motorcycles but they're boring. You can't drift the motorcycle "competitively". The modifications are super easy. You can make a whole video about it.

@wuthefuck 6 месяцев назад

Bro we just wanna see cool bikes..

@wexxel6603 6 месяцев назад

@barouqa there are competitive drift events for motorcycles though💀 nvm I lied I'm thinking of something else

@tfsvids4117 6 месяцев назад

Wrong channel

@mycosys 6 месяцев назад

Would be cool if they learned what a crankcase and block are, tho

@axax1573 3 месяца назад

im planning to open my own bike repair shop but i never repair a bike at all not even my own bike so this channel is perfect for me to learn while im saving money to do what i love the most to the point where i get crazy when i see an old unique bike's engine😂

@keebler345 6 месяцев назад

Was starting to wonder why you guys didn't remove the bucket and shims from the valves or mic out the cylinder out of round amongst other things. Great set up video for a full power sports engine tear down and rebuild.

@leviminton3320 6 месяцев назад

Finally a motorcycle video! I’ve been waiting for it for years. As someone who’s rebuilt quite a few single and twin cylinder bikes I actually really appreciate you all showing the work that goes into it. It’s very cool to see the insides of the hayabusa and Jerry did a great job explaining and showing everything. Please let him do more bike videos in the future! I’m so glad it finally happened.

@concernedcitizen2766 6 месяцев назад

I feel that Jeremiah’s the Conan O’Brien of Donut.

@Hybris51129 6 месяцев назад

That feels like an insult to Jeremiah these days.

@concernedcitizen2766 6 месяцев назад

@@Hybris51129 I meant Conan as in when Conan had the Late Night show on NBC, not whatever he’s doing now.

@shawnkiller90 6 месяцев назад

Or did you mean the Brian O'Conner from FnF 1 movie where he thinks a whole lot of Nitrous >> 1: Will fix all his problems and he will suddenly be unbeatable 2: Listen to a bald dude that's a supposed expert street racer and it will magically explode in a colorful flame?

@concernedcitizen2766 6 месяцев назад

@@shawnkiller90 nah I mean as Conan O’Brien who used to have Triumph the Insult Comic Dog.

@shawnkiller90 6 месяцев назад

@@concernedcitizen2766 you missed the joke but its ok mah dude.

@electricsnut 5 месяцев назад

My old GSX-R 1000 K6 blew my mind when I found it had 8 throttle body plates, independent throttles, 8 fuel injectors and it never went wrong as opposed to my new bikes that had constant issues. Suzuki are so underrated ❤️

@colinaziz3455 6 месяцев назад

I’ve wanted to do a Suzuki Carry Hayabusa build for a long time. Engine on display in the bed with an LSD chain drive. Rocket bunny kit, and you get to keep it in the Suzuki family. Pretty much a sequential shifting jdm monster go kart. Would love to see it.

@Jeremy1026 6 месяцев назад

If you have to get the rods through the holes again in the future, tie some decently long strings onto each. Thread the strings through the hole then drop the top back on. You can use the strings from above to pull them straight up with no hands getting sandwiched inside. Edit: Exactly like you ended up doing with the chain.

@southerndime333 6 месяцев назад

'ave ya got a tutorial on how to suck eggs too , geremie?

@tituskoreman1565 6 месяцев назад

Or built the engine up upside down like its meant to... but they are just fucking around and will rebuild it the proper way for sure

@shawnkiller90 6 месяцев назад

@@tituskoreman1565 Oh yea..FOR SURE they would rebuild it off camera the right way... totally! 🤣

@cvguerra8747 6 месяцев назад

These kids working.

@shawnkiller90 6 месяцев назад

@@cvguerra8747 Working on... ignoring cleaning the pistons while they are out of the block..Or ignoring all the build up and slapped them back in 🙂😂😂😂

@PastelBlackBunny 6 месяцев назад

I went to school to work on motorcycles. I studied the 4 big japanese bikes but never got too far when it was time to work at a dealership. Better hobby than a career if that makes sense. Whenever I fail at car related mechanics I'm going to remember this video and feel a little bit better about my technical prowess. Love you boys

@mycosys 6 месяцев назад

Pity you werent there to tell them what a crankcase and block are

@PastelBlackBunny 6 месяцев назад

@@mycosys Lmao it's understandable. Car engine terms and motorcycle engine terms always trip me up and I mix them up from time to time lol. Lowering the cylinders over the pistons and conrods practically killed me lmao. I got shit at my dealership because I didn't debur new piston rings OR use a sleeve tool to install new pistons and scratched the cylinder on my first engine rebuild there. Shit was so embarrassing man lol.

@jkosh2046 6 месяцев назад

@@PastelBlackBunnyI went to school for bikes also. Harley Davidson early and late model, Yamaha and Suzuki. I never went to work for a dealer either. I love working on engines, transmissions are fun too. Mostly I just build bikes at home. Sometimes repairs and flip, other times full custom builds. It keeps me from ripping up my personal bikes to often. Passing my 87 sporty down to my son. We are finalizing how he wants it then we will do a ground up build on it. Already rebuilt the engine and converted the trans to a 5 speed.

@PastelBlackBunny 6 месяцев назад

@@jkosh2046 That's sick! Where did you go to school if you don't mind me asking? And noice. I had a little obsession with shovelheads after my classmate brought his in to work on lol. I've since stepped away from bikes for now until I can have my own garage for one as well as my car projects lol.

@vanessakelley9662 6 месяцев назад

Just FYI. Stay away from the Harley-Davidson 1970s American bowling company production line when they purchased Harley-Davidson and no offense to anyone. But it was a very difficult motorcycle to work on with the American bowling company and even now trying to find parts for those years of Harley's. Good luck

@jeffshootsstuff 6 месяцев назад

This was painful

@markchip1 2 месяца назад

Watching you take the engine out reminded me of doing that on my Honda CB900F back in the '80s... Having only a very bare set of tools, I removed the fairing and all the engine bolts, laid the bike on its side, on a duvet on the grass... And lifted the BIKE off the ENGINE! Oh, the terrible things we do when we're young and broke!!!

@JordanPeisner 6 месяцев назад

love watching more bike content. Keep it comin boys!

@rodmorgan7041 6 месяцев назад

I was wondering why you guys didn't clean the tops of the pistons and the valves but......was this a set up for this super rebuild ! 🤪 I hope so. My god I can't wait.

@akalksander9184 5 месяцев назад

Was wondering the same thing

@treeguyable 5 месяцев назад

Would love to see the factory, and all the setups they have , for holding everything just right, for assembly.

@paagalindian1994 6 месяцев назад

this channel is the only channel i dont skip ads on, i actually look forward to seeing them

@mo_fohs 6 месяцев назад

Keep doing these videos please! Jerry and Jobe y'all do a hell of a job explaining how things work and make it far less daunting for a timid like me to get wrenching.

@trisssssssss 6 месяцев назад

So stoked to see bikes more often here. Such cool machines

@leviminton3320 6 месяцев назад

Same I really hope they keep making more of them

@axax1573 3 месяца назад

couldn't agree more

@TheSteveSteele 3 месяца назад

Nice explanation of how a clutch works. 👍🏼

@bomberaustychunksbruv4119 2 месяца назад

I have a GSX1100ef 16v. Which is the grandaddy of this engine. Vance and Hines hit the first 200mph pass using this engine. The Suzukis have always been special. A turbocharged Busa is a weapon beyond belief but can be reliable. Mental engines.

@jackusflackus1 6 месяцев назад

Donuts media creation team is nothing short of amazing. The creative ads they come up non stop are fantastic.

@namenamenamename7224 6 месяцев назад

The struggle to drop the engine and almost dropping the bike around 4:45 is the most relatable thing I’ve ever seen in a Donut video.

@billyka11 6 месяцев назад

Go n/a all motor.Stroked crank,big cc-1600cc,ported head,cams,carillos etc.

@rezkidgamingyt4725 6 месяцев назад

I’ve got the 2003 GSXR 1000 it’s not the Hayabusa but the engine is similar they are so easy to work on anyone with a bit of mechanical knowledge, can pull the engine apart, put it back together

@nicholaspostma3024 6 месяцев назад

The boys at Donut are stepping up their watch game ⏱️

@tonychavez7398 6 месяцев назад

I was thinking the SAAAME thing! lol

@pophilio 6 месяцев назад

I have noticed that aswell 😂 Deepsea and Kermit for wrenching on an engine? Nice!

@henryhardee4435 6 месяцев назад

Glad I wasn't the only one who noticed that. Classy choices!

@ginoluongo5115 6 месяцев назад

@@pophiliolooks like a sprite. Not a Kermit. The jubilee bracelet tells me it’s a GMT Master rather than a submariner. Unreal watch!!!

@MANIC3420 6 месяцев назад

I had one in the early 2000's and it was so hard to ride at low speeds. But in a straight line it was second to none! Very fun and scary bike. I ended up with a RF900 instead

@163082rock 6 месяцев назад

The timing chain tension struggle reminds me of setting temkin bearing In-play.. just kind of guessing at first and seeing what you get lol

@SPlRlT1 6 месяцев назад

My older brother had Hayabusa with a new exhaust and small turo setup. A Normal law abiding drive from muskogee Oklahoma to Tulsa is about 30-40 minutes.. He made it back before me in 18 minutes and was waiting at the turnpike exit for awhile until I showed up. This bike is unnecessarily fast but I'm not complaining 😅.

@chrismoltisanti2763 6 месяцев назад

FYI on most sport bikes like the busa. The transmission is designed to be shifted without the clutch. Even without a quick shifter. It's the same design as those sequential dog boxes that you car guys use. Only need to clutch when taking off or stopping. Shifting you can just blip the throttle and rip into the next gear.

@TylerTheBassCreator 4 месяца назад

Most motorcycles in general

@wildnfree223 2 месяца назад

In general you're right, but in experienced hands, a slip of the clutch can often assist shifting under full throttle. Principally we need to create an " unloading " of the gear dogs momentarily to allow shift drum and fork to push the gear into the next gears dog. Either cutting fuel, cutting ignition or in this case slipping the clutch at full throttle creates that unloading and bam our sequential gearbox shifts ! Much love from Alberta Canada 🇨🇦

@marshalltucker9690 6 месяцев назад

im really glad you guys have done bike episodes. cars are cool and so are bikes. been nice to learn about both. motor sports!

@charlsinsigne1814 5 месяцев назад

Watching donut is one channel that taught me the parts and how it works of an engine, shi i dont even have a car or motorcycle

@faafo2 2 месяца назад

2:36 that way of describing throttle response is so accurate (and unusual) ...

@yav1d 6 месяцев назад

Yes!! More motorcycle content please! I need this on real mechanic stuff

@snailevangelist 6 месяцев назад

1:07 the looks are one of the big reasons the bike is fast! it's fairings are more aerodynamic than the more angular design of other bikes that existed at that time. they were inspired by bullet trains in part

@jamesbernard8072 18 дней назад

I love how this channel takes well-built masterpieces and goose off in the garage

@SlingKing2015 6 месяцев назад

I love the idea at the end. Can't wait to see how it turns out. Also, not to piss in anyone's cheerios, but whoever told you that a 'busa would go "well over" 200mph with the limiter removed was wrong. That first gen might INDICATE over 200mph on the speedometer but you won't be going as fast as indicated. It takes modification on any busa to hit an honest 200mph. Once you complete your build, I'd love for you guys to use GPS or radar and show your new top speed. 😁 Please?.... I've had a couple of Busas and I really want to see this.

@gmailisaretard 4 месяца назад

After googling I see like most experts you might be sort of correct, depending on where you move your goalpost. Looks like its not getting it to 200MPH in the mile, but plenty seem to think that if you gave her a little more room to stretch you can touch it.

@johnjones5977 4 месяца назад

@@gmailisaretard I disagree, and have owned and ridden Busas for years. A Gen 1 would top out at around 192 and a Gen 2 at about 195, maybe 196.

@thomasbuchanan2142 6 месяцев назад

Excited to see the swap, I just got a 79 fiat x1/9 and have been looking at engine swap options for the (probably far) future. They only make 70 hp or so stock so a Hayabusa would be a night and day difference

@joshe2420 6 месяцев назад

You've got a golden engine in the x1/9, you just need to put some work in it to make out the potential it has

@kameronpruitt5176 6 месяцев назад

A busa motor in that little thing would be sick bro

@chrishenniker5944 5 месяцев назад

If you’re looking at an engine swap, Honda K-Series, the Fiat Multi-Jet or Five Cylinder Turbo from the Fiat Coupe might work.

@cryptic_197 6 месяцев назад

We love the motorcycle content. Thank you for listening to your viewers! Keep it coming!!!

@atranimecs 6 месяцев назад

the hartley V8's using the cylinder heads of hayabusas are nutty.....its crazy how a small turbo and this engine can put so much power into a small package.

@oleksandrbezkorovainyi 5 месяцев назад

I just appreciate that Jobe is a Donut presenter by day and an Idles' guitarist by night. Thank you, Jobe)

@corsac_ 6 месяцев назад

Watching you struggle with the camshafts was so funny because it had the literal same problems when I did a rebuild on a 2007 model last week Btw you can google up a pdf on how to assemble the whole engine. As I work for Radical, I have access to a pdf guide that’s 663 pages long

@EricDanger13 6 месяцев назад

Busa engine is either going in the Chang li mini truck or the mini bike. Either way I’m stoked!

@xtop23 4 месяца назад

I had a 2001 I bought new…… I think that was the year….. it was whatever year the last unrestricted one came out. It was blue and grey and beautiful. I maxed that thing at an indicated 213mph or so. All I remember is the tach around 11-12grand in 6th gear and the wind in my back trying to rip me off of the thing. Unreal fast bike. Crazy torque.

@5uperSmok3 6 месяцев назад

Sick! cant wait for part 2

@phumade 6 месяцев назад

OMG, I actually paid attention through the ad. That was funny and timely.

@warlord6416 6 месяцев назад

Honestly it would awesome to see you guys racing these cars obviously you guys love driving and i would be down for videos of just you guys driving your builds maybe even have everybody in the favourite car but yeah driving having fun it would be dope but just an idea

@afeed581 3 месяца назад

9:34 "Anything that just slips off, is not supposed to just slip off"

@collinclay3803 5 месяцев назад

slap a turbo on that thang!! If its Gen 1 you can keep bore and stroke factory spec but if its a Gen 2 busa you'll definitely want to lower the compression a tad bit. Other then that if I was building it I would also swap out any moving parts with either oem or upgraded aftermarket components.

@werepat 6 месяцев назад

Hell Yeah! I am here for this series! I cannot wait to see what ridiculousness ya'll end up with! Mo pawah, babeh!

@jaatynytenkeli 6 месяцев назад

A little tip for when you put the bottom end and cylinders together, tie strings to the rods that goes thru the cylinders and tie them to a engine hoist or something above, it keeps them always centered and makes that whole thing a lot easier.

@michaelbrinks8089 6 месяцев назад

I was thinking one person alone could get the cyl block on the pistons the same way using strings.

@jaatynytenkeli 6 месяцев назад

@@michaelbrinks8089 that's how I always did it

@junieserrano7098 6 месяцев назад

Started my build 4 months ago, for jus a simple rod knock. So far I built the head and needs a few transmission mods.

@_yourbigdaddy 4 месяца назад

My father have 1 of this. He's rebuild it , new piston n everything, he do a port n polish on intake n exhaust port , he upgrade to the 2mm bigger throttle body from a stock size , stage 1 camshaft .. it runs more than he expecting

@IbraQuelloVero 6 месяцев назад

Donut never disappoints when it comes to ads, original 🙌

@paulgoff1654 6 месяцев назад

Great episode lads 👏 👏 Absolutely love the motorcycle content. This isn't a car channel, it's a speed channel 🎉

@fit_pharmd4830 6 месяцев назад

Yes all for the MOTORCYCLE CONTENT!! I owned a new 2005 GSX-R 600 and then went to a 2007 Triumph 750 Special Edition. Look it up - it was Black and With Gold fleck paint, gold forks, lots of torque! It was a masterpiece back then. Total impulse buy when I was 24!

@Wontreplyeverdontbother 26 дней назад

Why the fuck would we look it up? Lmao no one gives a fuck about what you are saying

@noj3reyed833 6 месяцев назад

Will definitely want a part 2 ❤

@DrDastardly776 6 месяцев назад

Needed grease the other day, I picked Valvoline just because of donut... And it was the same price as my next option lol.

@hunteranderson7007 6 месяцев назад

This needs to go back in the bike! I’d love to see a track day with it. It would be cool to see a somewhat dyno comparison between stock numbers and aftermarket

@tigerman1978 6 месяцев назад

Tune the hell out of it and see how fast you can get that hayabusa running was my thought too...

@rangeraficionado87 6 месяцев назад

@@tigerman1978 BORING. Been done thousands of times. All over RU-vid already..

@Motoboo_Marine 6 месяцев назад

These things aren't really meant for track days; drag strips are more where they shine. They're not very fast around a racetrack.

@motorteeth 6 месяцев назад

There used to be a company on Vancouver Island in BC that imported Caterham 7's and put Hayabusa engines in them. They were reportedly absolutely srupid fast. Wish I had got one but the owner, David Saville Peck, passed away a couple years ago and no more are being made.

@ronratliff8320 6 месяцев назад

That was by far the best ad I've ever seen. Great video too. Y'all should take all the advertisements and upload them as shorts or their own playlist. They deserve that level of reward for their efforts.

@KITsune-ICHI 6 месяцев назад

Put it in an old bug or Cooper. Interestingly, there are some folks out there that make a chain differential with a selector that can run both directions. You don't have to worry about a drive shaft. Everything will run directly from the busa transmission. Also, because there's a selector for which direction the differential turns, you have a reverse directly out of the box. As an added bonus you can go full Fast and Furious and shift through multiple reverse gears.

@charlescdt6509 6 месяцев назад

This is awesome, can you bring back Sci-garage? Keep dropping that knowledge one the folks.

@thereallinksafari 6 месяцев назад

probably the only youtube ad that i didnt skip, good job donut

@Mentatstrategy 5 месяцев назад

Can't wait to see what you guys do with this beast - just don't die!

@HeyItsEmilyLove 6 месяцев назад

I want a bike so badly. My dream bike is an R1M, but I’ve always liked Hayabusas. Something that small and that fast just seems so wild. I’d have a lot of fun on something like that

@PaganiGaming 6 месяцев назад

Day 413 of asking James to do an Up to Speed on his Dad

@melkerlarsson5728 6 месяцев назад

Just stop it

@LeftHandedRightHanded 6 месяцев назад

Bro this isn't even funny anymore

@joshuagibson2520 6 месяцев назад

To the top!

@Addycuber7 6 месяцев назад

Bro is dedicated

@Bigbacca24 6 месяцев назад

😂

@hudsonwatts339 8 дней назад

Donut is one of, if not the only channel that has consistently good advertisement. Their writer is a genius.

@ramishrambarran3998 5 месяцев назад

I would agree with you that a car's clutch and a motorcycle wet clutch do the same thing. But the method is quite different, as well as the components used. The old R series BMW bikes have a smaller version of the automotive clutch i The execution and components are similar. Trinidad & Tobago. West Indies.

@Simme_sm700 6 месяцев назад

I like how they tried to put the cylinderbank upside down onto the bottom end at first 😂 lmao Love your content 👌

@JohnSmithShields 6 месяцев назад

Jeremy Clarkson loves this bike and engine. As experienced in the Hovervan episode.

@darren2662 6 месяцев назад

Blackbusha - Jeremy Clarkson

@heinmagere12 6 месяцев назад

please do a engine inside video of the rsv mille. it would be nice to also see a italian v2

@micahofficial8240 6 месяцев назад

Ive seen a valve that impacted a piston look fine with the naked eye, and the piston it hit was cracked in two. Crazy

@sibulanga72 6 месяцев назад

It kinda looks like an Oni mask, if you think about it 🤔 hence the grotesque look If I get a biking license, I would definitely love to experience one of these behemoths.

@mycosys 6 месяцев назад

Yeah, i though the same, very 3 eyed Oni

@charliejohnson2332 6 месяцев назад

Well that was anti-climactic! I wanted to see it run and before I knew it, it was the end of the video 😢 looking forward to seeing the next installment of this project! Hopefully soon!!! 😂❤

@DannySpins 6 месяцев назад

Those are insane motorcycles. I still love how they look.

@ALX_1201 4 месяца назад

Hello everyone and thank you for the good video explaining the differences from car to motorcycle engine. I'm from Germany and I've been riding a new bike since last year. so far I have ridden 25,000 KM in one season. Everything is still going very well and I change the oil every 4-5,000 km. When do you recommend redoing the spark plugs? I have a motorcycle with a single-target Indian but 2 spark plugs

@TheNightAngel1212 6 месяцев назад

Build the world's fastest go kart using a Hayabusa engine!

@rexsus1gaming156 6 месяцев назад

I rebuilt an anniversary edition and then I didn't like riding it. It was comfortable to sit on but felt too big for the twisties... now I'm in my 40s and let's say I value the size and comfort of the busa a bit more 😂😅😢

@TheInfantry98 6 месяцев назад

Getting old grandpa

@rexsus1gaming156 6 месяцев назад

@TheInfantry98 you're not wrong lol. You see the new bmw m 1000 xr? I've got an s1000rr and I'm kind of eyeballing that thing like, "I'm not going to a cruiser, but that ish I could get down with" 🤣

@Devil0027 6 месяцев назад

I too didn’t like the look of the Busa at first. But now that im older, i absolutely love the look of the 2nd gen busa and still want one. Maybe when im done with my 1K it’ll be next

@michaelryan5973 6 месяцев назад

kudos to the valvoline ad! I hate youtube's ads aswell as poorly made advertisements but that was actually relevent to me and cool. please continue to get advertisements like this if you can

@andresitoelpana 6 месяцев назад

Donut + motorcycles = W + the busa is my favourite bike

@stephenhudec1625 6 месяцев назад

Put it in the Miata!! Always love seeing tiny sportscars with powerful, high revving motorcycle engines. It would be dope and pretty unique. Would love to watch a whole series or at least mini-series on doing this swap

@QuincyStick 6 месяцев назад

Only issue is it would actively make the miata weaker, and they've already put tons of money and work into the miata.

@matthias19850 6 месяцев назад

I'm talking call up Chris Moore and the Moore Mafia for help; especially dyno tune etc at the end

@gorytarrafa 6 месяцев назад

The first thing my father taught me when I started dismantling bicycles when i was a kid is that the material is always right and if it doesn't go in properly it's not with force or with a hammer that will make it go in.

@vwrabbit82 6 месяцев назад

Day 1 of asking why the Dark Mode sticker sells out so damn fast

@user-tk8dn4ju6y 6 месяцев назад

can you do a new HiLow with 2 integra type R's that would be really cool?

@lucio2010111 3 месяца назад

11:40 Actually the vehicle weight don't affect topspeed, it affects how fast you reach it. Of course, the civic has a greater frontal area, more mechanical losses etc but the key point are horse powers.