Adapter plate 3921296
Starter snk0021 db electrical
Flywheel 3921263
Pilot bearing measure your flywheel and input shaft size
Clutch get a self adjusting for your spline count and application and sae 2
Clutch housing 4305199
Clutch slave, search on eBay for Eaton hydraulic slave and get one with a fork that obviously will bolt to the housing.
Be sure your transmission does not have a cooler or you will have to modify your mount and use a OEM type slave like I did and get clutch fittings to work.
Drive shaft parts be sure yours has a 1710 series output or you will have to buy one for your trans like I did.
Np205 1410 output 3-4-10951-11 spicer
Np205 dodge front output flange Northern drive train 00105
Northern drive train 4-2-669 1550 np205 input flange
Northern drive train 4-82-191 1550 adapter
Northern drive train 6-3-2631kx slip yoke
You will need 1 1550 ujoint a ford np205 or any other drivers side drop tcase but the part numbers listed are for a ford 205 and one 1710 ujoint.
Call Tom woods drive shafts and get the driveshafts you need base off your length. I used 1480 for the rear instead of 1410 because my yoke was needing replaced anyway. For the front I modified my stock
Verify all parts will work for your application spline count etc I am not responsible for you ordering parts and being wrong. This is merely to save alot of time for anyone trying to do this swap. Big thanks to jagers garage for alot of the part numbers for when I did mine in 2021.
12 июл 2024
