5 door KitchenAid fridge display/panel wiring issues. Hope this helps. 4+ year old fridge no warranty remaining. Link to Diagnostic panel options f01.justanswer...
Wow, thank you! I started having electrical issues and looked at this panel. There was water under the panel. On the back of the board I found some corrosion. I got some alcohol and cleaned it up and everything works again! You saved me at least $200 and some heartache.
Thank you so much for the video. It was a source of my issue with my fridge. Save me $158 to have a service guy come out and tell me what you told me for free.
Thank you! After ordering a used control panel on e-bay we saw this video. I unplugged the circuit board and voilà! all the lights came back on! Thanks again.
Did you see any other problems with just unhooking the board? We have done so and all of the "symptoms" have vanished except I still cannot use the "diagnostics" on the main control panel. Everything else seems to be functioning correctly now. Thanks again. @@markm2993
This was helpful! I already had a tech come out and order replacement parts under warranty. It’s good to understand what’s happening. I just got a new control panel in the mail today and the plug was all corroded. I notice yours has a loose orange wire. Was that reattached to the plug? My yellow and orange wire came off and there were little wire terminals inside the plug. Now I need to find where to get parts to pin it again.
Yeah, my pins had corroded and fallen off the back. I just soldered directly to the panel and placed a thin layer of silicon along the whole backside to keep moisture away, as well as checking it often.
Genuine OEM Part # | RC Item # 4534150 here is the part you'll probably need. Repair clinic has a good video on the repair and it's fairly straight forward. Hardest part I found was the rear cooling tower tabs can be pretty fussy to pop out and back in. Hope this helps
I don't know if this has a disadvantage, but I just removed the circuit board from the drawer, and left the wiring there and fridge seems to work fine!!!!
Yeah I never bothered replacing the panel either. There is a baffle in the back that is controlled by the drawer panel so as long as its full open you won't have any problems.
All French door fridge is have their issues. This is no exception. Samsung and LG are in a class action lawsuit over stuff like this. Just got rid of Samsung fridge and a Samsung dishwasher. Both failed. Dishwasher failed in three years. Fridge failed after seven. Cost to repair was almost out of a new fridge soap new fridge. Thanks for the down low on this one.
I found Samsung struggled with humidity control. With the French doors being open and the rapid loss of cool air they constantly frost up the coil. We have a busy home and this fridge has been more then reliable minus the drawer panel. Keeps milk cold in the door which is more than I can say for most French door fridges.
I have the same problem. I can't fix it! No lights come on, no water gets dispenses, doors don't appear to be closed even thought they are, please guide me to fix this
Update2: ripped off the panel, and how could you not, everything works now! Even without that little panel, the doors are "closed" now, it makes ice and but it didn't dispense water, the lights inside light up. That's crazy! Thank you so much for showing this
PSA: knowing my family, this probably won't get fixed any time soon. We got this fridge almost brand new with some problems (it seemed like they all relate to the same root cause) at at a liquidation for dirt cheap. Thank you so much anyways, the fridge works so far. Except the water won't get dispensed
@@markm2993 Yep that was the first thing I did. Even ran a small bead of grease around the seal. Still frosting up, this is the fourth time. Ran the diagnostics and found nothing.
@@calivalley9056 there is only a couple components to the freezer, I would run the fan diagnostic using the panel and see if you can hear it running. I would also put a thermometer in there to make sure that it is at the set temperature.
There is a technician diagnostic mode available online that may help troubleshoot the fridge available on justanswer.com will help determine if it's a door sensor or board failure etc
Thank you soooo much man. gonna check this as soon as I get home. door light on and wont shut dispenser off when you remove the glass. the freezer has been freezing up and have to defrost about once every year, is this the same freezing issue you were having or was that something else
My freezing/warming was limited to the fridge cabin space not the freezer but both use the same sensors so might be worth a shot. There a steps online to force the fridge into a defrost mode to melt condenser ice buildup. As far as your water goes it sounds like it might just be a sticky paddle from hard water. Spray some clr or vinegar up high and it might help with the paddle sticking. Can also check and see if a door sensor isn't working. Might be causing your lights staying on. Google diagnostic mode 5 door kitchen aid and it should come with testing steps for fridge
the lights dont stay on, all the paddles respond well. the open door warning light stays on. thx for the advice. where is the sensor you replaced located. also where would I spray the vinegar....
@@-hondosolo4518 spray the hinge at the top of the water paddle. And check the door push sensor for each door and drawer to see which one is not showing closed.
My Samsung fridge will forever be the worst. This fridge has been great since repairing and durable considering what my kids put it through. Hasn't even frosted up with them in and out at all times during the day.
That orange wire has corroded from its connection. You can work the connector out of the terminal and solder it back to the wire, then reinsert it back into the terminal. Your panel should start working again.
