Call us today with you model number and we will make sure you get the right part
888-655-8569
In most cases we can get you the part the next day if ordered before 4pm central time.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Donations are appreciated as well you can donate here - www.paypal.me/...
If you have a similar problem but the wires are good. Here is a link to the Evaporator fan.
amzn.to/34VYPbp
Here is the link to video to show you how to get to the evaporator.
How to take Kitchen aid/Whirlpool French Door Refrigerator Apart. (How to get to Evaporator) • How to take apart Kitc...
This unit was not cooling properly. The freezer was at 15 degrees, when’s its supposed to be at 0. The fresh food section is at 50 degrees when you want it at 37. I did the evaporator fan test first to see that the fan was not working. Got to the evaporator to find the fan good and the wires were corroded. I spliced the wires because otherwise you would not be able to fix it. Cannot get the harness that goes through the wall. If you run into this and all the wires are corroded and broke off you will have to splice them all. You can find the wiring diagram under the right hand side hinge cap. Take that screw out and there you have the schematic to match wire colors.
This was a good one that i have seen a couple of times. If you need help don’t hesitate to ask
10 сен 2019
