6 Annoying Dirt Bike Bad Clutch Symptoms [Simple Fixes]

Подписаться 13 тыс.

Просмотров 75 тыс.

50% 1

How to make dirt biking safer using basic techniques [Get my guide for FREE today] - motocrosshideo...
Your dirt bike clutch symptoms may be an easy fix, but if you let it go, it can cause major problems. If your clutch is slipping, you're not only missing out on power, but it will make your dirt bike overheat much quicker.
This can lead to coolant leaking out the radiator overflow, as well as engine damage that requires a rebuild.
In this video, you'll learn 6 common (and annoying) signs that your dirt bike clutch has problems, why they're happening, and then how to easily fix these issues so that you can keep riding without having to work on your bike as much.
Here's the full article on my website:
motocrosshideo...
Motocross Hideout is my personal brand to help new riders learn to properly and safely ride a dirt bike so that you don't crash and miss out on life because of an injury. My Virtual Dirt Biker School is an online riding course/camp that teaches anyone new to dirt bikes the basic techniques to stay in control and become a better rider faster. I've taught many first time riders over the years, both guys and girls, young and old.
Motocross Hideout - "Learn More: Ride More"
Disclaimer: Dirt biking can be dangerous if you don't respect the bike or terrain. This video shows you tips to help keep you safer as well as improve your riding technique and skill so that you stay in control while riding. I, Kelley Fager from Motocross Hideout, am not held responsible for a crash resulting in an injury from trying these techniques. Please use proper dirt bike riding gear to help prevent an injury.

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 283

@MotocrossHideout 4 месяца назад

Dirt bike stalls when you put it into gear even with the clutch pulled in? Watch this first: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html

@marshallk23 День назад

Just wanted to say thanks for all your videos! Can't even count how many times I've used your vids to help with my bikes! Great way of explaining things! Keep up the great work man!

@DeylorXiX Год назад

Thank you very much, i searched everywhere and couldnt find the problem. But thanks to you i know it now, i have to replace the clutchbasket. Thanks 🙏🏽 bud!!

@MotocrossHideout Год назад

You're welcome Felix, glad I could help. What was your bike doing?

@asimo90 5 месяцев назад

I am working on my girlfriend's '01 YZ125. Clutch doesn't engage until lever is almost all the way out, and if you try to start the bike in gear with clutch pulled, the bike will lurch forward as the crank spins over with the kick-start. I also feel the bike is lacking power, but I've dialed in jetting and oil ratio. The bike sounds really good and crisp. It just feels like something is holding it back as the bike is slower than my 125 but has more done to it haha. Thanks for reading.

@MotocrossHideout 5 месяцев назад

That's awesome you're helping out your girlfriend! Have you tried adjusting the clutch cable? It sounds like the clutch plates might just be worn out, which is pretty common on a 125 motocross bike. They're fairly cheap and easy to replace.

@Cruizerdoesit 4 месяца назад

@MotocrossHideout your amazing for trying to help that rider hey just got a 125 4stroke apollo thing and with the clutch pulled in on first gear it's hard to roll the back tire but when I put it in neutral it rolls fine mind u it's new haven't started it yet

@Trippy10169 4 месяца назад

def my top in power has vanished time to replace it

@AidenSteele-zc9lg 25 дней назад

Got a 2023 klx 140 recently, not many hours- while I was riding for an hour, near the end the engine sounded different and the throttle felt like it was losing power while I revved it. It dies while I downshifted and kept dying while I tried to start it and go into gear. I even tried giving it some throttle while holding in the clutch until it engaged- it just kept dying. I dont know if it's the gas, I still see fuel in the bottom of the tank, not much but theres some. I put my hand near the engine and it did not radiate super hot. I dont know if it was because I was mainly running in 2nd even for some hills. Y'all know what it might be?

@xandi1853 Месяц назад

When i release the clutch it sometimes doesn't drive even tho i have it in gear

@JamesSummers88 Год назад

My bikes clutch is rattling. Is there something like dirt in my clutch or something??

@MotocrossHideout Год назад

When does it rattle and where is the noise coming from?

@JamesSummers88 Год назад

Ended up taking it apart. Found out my springs are done. So the rattling was coming from some of the bolts (with the springs) that went loose and was hitting my case and making grooves. I caught it before it was too late though. Washed out my bikes oil to be safe from shavings.

@banfibotond 10 дней назад

operating the clutch while shifting is flawless, but at first gear when i start rolling and let the clutch out slowly it feels notchy, but only when i start rolling, and it happens rarely. as i remember from recent teardown the baskets are just fine, and i dont know whats causing the problem

@Ekani. 6 дней назад

i have tc 85 2020 in very good condition engine in nice after work like 10mth everything good but i have one problem when the bike is cold clutch works good but after faster ride clutch starts to dragging like i put in in 1st or 2nd and stay there waiting it runs like for 20-30seconds and rpms goes down and engine turns off.. sometimes its running fine sometimes it dies plates is fine clutch basket is fine too when its hot and i put it in 1st and give some few seconds a little bit of gas it dont stall and i can move or stay without "stalling" it dont die when im riding when im shifting when im going from hill with clutch pulled in and no gas it dont stall too only when stop and in gear do someone know what can do that? clutch pump? i have hydraulic clutch maybe islander? i have good motul oil in gearbox but i will change it to what husqvarna recommend motorex help :D

@coolbreezez71 22 дня назад

Dude ! I have a 1968 Yamaha ysc1 , 180 !!! I release slowly on the clutch and it starts to move . But the it does a notchy issue . I filed them . Not all the way down . But relatively flat . Still does it. Also added new fiber plates . Still same issue !!

@MotocrossHideout 20 дней назад

Notchy is usually the basket, as you mentioned. I would replace the basket, otherwise filing them all the way down might fix it. It will wear out sooner than later though.

@coolbreezez71 20 дней назад

@@MotocrossHideout thanks , I’ll give it a try !

@inclinedtoplane2924 Месяц назад

Does anyone know why when I do a clutch up wheelie it’s like the clutch slips or the engine rpm drops quick enough to not give me enough power to pop it up? I’ve tried dumping the clutch at different speeds but it doesn’t seem to work. I can wheelie other bikes like surrons and pedal bikes well but I can’t pop up this crf250l. Any tips?

@user-fb6gt1gr7b 3 месяца назад

When i press the clutch on gears for exemple on a red light, i feel there’s a bit of power going on the rear tire even tho it’s clutch in.. what can be the problem?

@DemiGamesNL Месяц назад

If you have found your problem please let me know😅

@vqkxng297 16 дней назад

@@DemiGamesNLhave u figurrd your problem out?

@giorgas 9 дней назад

I have same issue. I changed disk clutches and it worked but after few days it started doing the same thing. Then i noticed the clutch cable was in very bad condition so i changed the cable and it was good again. Now i have new clutch cable and new clutch disks but it still does the same thing.

@Agv_Eric 6 месяцев назад

Just rebuilt a cr80r I cleaned the carb set it back to normal for the most part, also put a new top end on and now it starts first kick, but when I put it in gear it doesn’t go????

@MotocrossHideout 6 месяцев назад

Sorry to hear that. What does it do when you put it in gear? Did the clutch cable break?

@CalumMac-ox4ek 2 месяца назад

What was the problem

@CalumMac-ox4ek 2 месяца назад

Have the same thing with sx

@Agv_Eric 2 месяца назад

@@CalumMac-ox4ek clutch plates where fried like I suspected, So bought sum new clutch plates and bolts (whole kit basically) and was fine after that clicked into gear

@MotocrossHideout 2 месяца назад

Thanks for the update - glad you got it figured out!

@drago3345 3 месяца назад

I bought an exc 450 2018 and when its in 1st gear it sometimes just keeps driving even tho i have the clutch pulled in all the way…how can i fix this?

@MotocrossHideout 3 месяца назад

KTM's often do that. It could also be old/sticky oil. Try fresh oil or a different oil that's made for wet clutches. It could also be worn/warped clutch plates from getting too hot too many times.

@isaacraines9131 Год назад

I’ve got a 2014 yz450f and it’s like I have to rev it way higher than normal to slowly roll out of 1st gear, any ideas?

@MotocrossHideout Год назад

Hard to know over text... So what happens when you don't rev it high to get moving?

@1fast300sx 11 месяцев назад

@@MotocrossHideoutmine does the same thing but its an 04 nd it will just stall, when you actually get it to ride it the throttle is pretty jumpy and the bike sometimes will shut off when pulling in the clutch and slowing down it will just get rlly quiet nd die

@jhaymarkvillanueva1053 Год назад

damn Finally I found this video help help me alot with my ZX25R so I need to replace my clutch basket

@MotocrossHideout Год назад

Glad it helped. Thanks for watching!

@RobertPettersson-g2v 2 месяца назад

Quick question. Hope you or anyone can answear this? Got a crf 450r 2016. My clutch lever got tiny slack but when i hit the gas slightly, the slack on the clutch lever increase quite alot, almost all the way. Never experienced this before, tried to google it but i found nothing. Have a good day yall! 😊

@claw_zero4185 5 месяцев назад

While I'm riding the clutch works great then all of a sudden becomes very loose and doesn't even work till I turn off the bike and then it works again the fluid is completely full but still makes a squeaky noise what could it be

@MotocrossHideout 5 месяцев назад

Have you tried bleeding it? Might need to rebuild the master cylinder. It's fairly cheap to get a rebuild kit.

@gradystilwell3361 Год назад

My bike all of the sudden started to move forward when I realease the clutch even tho I’m not giving it any throttle is this normal?

@JamesSummers88 Год назад

Yes. But when you let it out completely it should stall. This is because you're putting it into gear. But yes it's normal on every bike to have that. It's the "catching point", we call it.

@MotocrossHideout Год назад

Great answer, James!

@_paxora 5 месяцев назад

my bike on 4th and 5th gear is slower than it used to be, the power on the other gears its the same as it was but it just goes 15 km slower than it used to. Help

@MotocrossHideout 5 месяцев назад

What bike? Have you checked the engine compression?

@burzendowski100 4 дня назад

Clutch drags when hot, where’s the link ? Ty

@MotocrossHideout 4 дня назад

motocrosshideout.com/dirt-bike-clutch-dragging/

@michaelcalderon4401 7 месяцев назад

I have a noise that goes away when i hold the clutch in then it comes back when i let go of the clutch

@MotocrossHideout 7 месяцев назад

Hey Michael, it's hard to know for sure unless you take it apart and inspect for wear/damage/loose parts in the clutch. My WR450F is noticeably louder in neutral and quiets down when I pull in the clutch. If it recently started doing that, I'd look into it before it causes a major failure.

@edwardmilf7586 5 месяцев назад

I’m working on my buddys 2000 warrior 350 bored 40 over hot cam and new clutch but there no clutch I’ve adjusted it out and still bucks and stalls when put into gear I’m bout to get into the clutch and look at it but I was wondering if anyone can help me out

@Clandex Месяц назад

hi , i have a problem , when i put in first gear it just stalls also when im stopping i have to give it throtle because if i not i just stalls even when the clutch is fully pulled

@darrylburmeister1676 22 дня назад

Same problem

@jbleezy-lx3fr Год назад

Every time I start my bike and put it into 1st gear it stalls and have to push it to get it going, but after that I can downshift to 1st just fine, any thoughts?

@MotocrossHideout Год назад

You should watch this video and let me know what you think: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yR5oqGjbpgI.html

@BNJITOKES Год назад

Me too man me too

@MotocrossHideout Год назад

Could be sticking clutch plates. Have you tried changing the oil?

@RexFixx Год назад

Before you start riding drag in out your clutch multiple times

@BNJITOKES Год назад

@@MotocrossHideout not having so many issues with it this season been giving the bike a lot of time to warm up and after changin last years oil she’s running like a dream I like to just kick it into first while it’s on the stand so the rear wheel has no resistance and the clutch frees up easy then it’s all warmed up for when I wanna be on my way.

@anarchy-anthony821 4 месяца назад

My 1990 yz125 only kicks over in neutral and it stalls out if I’m in 1st or 2nd with the clutch pulled all the way in. Any idea of what may cause that? Only been in the dirt bike world for a year now so I have no idea..

@MotocrossHideout 4 месяца назад

Welcome to dirt biking! Check out this vid first: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html

@rushiiiop Месяц назад

Hi, I have a little problem with my crf230f when I upshift at low rpms it works perfect but if I try to upshift at high rpms it wont shift, I can downshift at any rpms, low or high. I have the right amount of clutch freeplay at the lever and the shift pedal doesn't hit the case.

@MotocrossHideout Месяц назад

Are you shifting with or without using the clutch?

@rushiiiop Месяц назад

@@MotocrossHideout with the clutch, I took it for a test ride with normal footwear to feel the shifting better, the shifting problem is really random some times I can shift through all the gears without a problem, I bought it used a little over a week ago, I ended up ordering the gearshift star and the gearshift plate. I hope thats the issue.

@MotocrossHideout Месяц назад

@@rushiiiop Okay, please let us know what you find out!

@rushiiiop Месяц назад

@@MotocrossHideout I changed the gearshift star and the gearshift plate and now the bike shifts like a dream. Now I think I need to re jet, I took out the spark plug and it was a little too white, the bike came with a aftermarket exhaust and without the airbox snorkel, If i put back the stock exhaust can that help with the lean condition or without the snorkel the only option is re jetting?

@Green_stax Год назад

is it normal that while the bike is off (also so can hear it better) and it is in gear with the clutch pulled in that it makes a click sound at first when rolling the bike forward or backward? Also seems like there is still some resistance when spinning the rear wheel with it off of the ground, with the clutch pulled in while in gear?

@MotocrossHideout Год назад

Yep, that's normal. There's still some resistance from the clutch because it slightly drags even with the lever pulled in.

@anthonyaranda8775 2 месяца назад

Hello need some help ! Every time I pull my clutch in put it in gear and I go to release the clutch the bike does nothing it’s acting as if it’s in nuetral what could that be ? 2001 gsxr 600

@MotocrossHideout 2 месяца назад

There's either something wrong with the clutch or perhaps the transmission shift fork got bent. Did the bike fall over on the left side before this started happening?

@chrisbarnett7518 8 месяцев назад

I got a 98 yz125. When my bike is off and in gear I grab the clutch to see if I can move it while in gear. It just wont move. Its a new clutch and cable which adjusted so many ways

@jackobrown954 8 месяцев назад

hey man just wondering if it works while running because i have a 2011 yz450f that has the same problem

@chrisbarnett7518 8 месяцев назад

@@jackobrown954 yea it works. Also I found out once it's warmed up. I can move it in gear when it's off.

@jamesamescua8647 6 месяцев назад

My ktm 350 when I put it into gear it shuts right off but when it warms up after 5 minutes is doesn’t do it no more I thought maybe the oil or cable but I’m not sure

@MotocrossHideout 6 месяцев назад

Hey James, sounds like the clutch plates might be sticking. This is somewhat common on KTM's because they have tighter tolerances on clutch plates. You could try changing the oil more often or use a motorcycle-specific oil that's made for "wet clutches" and is more slippery of an oil.

@wadesoutdoors1914 11 месяцев назад

I just bought a ssr 125 foot shifter goes through all 4 gears but it’s not engaging into gear . It will free wheel no matter what gear it should be in .

@MotocrossHideout 11 месяцев назад

Hey Wade, sorry about your new bike issue. Did it do this before you bought it? So are you saying that you shift it into gear but when you let out the clutch and give it gas, it won't move?

@wadesoutdoors1914 11 месяцев назад

@@MotocrossHideout I bought it as a project . The motor starts and runs fine . But when trying to select gear it’s not engaging . The bike will still move as if it’s still in neautral .

@MotocrossHideout 11 месяцев назад

Okay, it's hard to know for sure over text, but it sounds like there's something in the transmission that's either bent, worn out, or not installed properly. Was just doing a quick search and found this: www.planetminis.com/threads/ssr-125-semi-auto-transmission-issue.238250/

@Recklez_j 5 месяцев назад

What can it mean if your bike is making a horrible grinding noise when your riding it slowly ?

@MotocrossHideout 5 месяцев назад

Make sure the wheels are straight and the chain is properly adjusted on both sides first. If the clutch is properly adjusted at the cable, I would probably take the cover off and see if anything is loose/missing.

@bryce_durbin227 4 месяца назад

my problem is the bike slips out of neutral into 1st ALL the time, if the bike sits there and i go to try and move it, its in gear without even touching the shifter. even just pushing the bike without it on it will slip into neutral, i can barely get the bike to start without it slipping into 1st and then when it does even while holding the clutch in the bike starts to go like im barely coming the clutch in. i can also can BARELY find neutral to the point i have to use my hand to find it, its a kx85. not sure what the problem is, has fresh gear oil too.

@MotocrossHideout 4 месяца назад

Interesting. Sounds like the shift fork could possibly be bent inside the transmission. Have you tried searching Thumpertalk forum for this specific issue?

@bryce_durbin227 4 месяца назад

@@MotocrossHideout yeah one of the forums said the issue was the detent spring. i haven't taken it apart yet to look sense i'm waiting for the parts to come in so hopefully that's the case and i won't have to split the cases

@kaloqnkuzev9802 Год назад

Hi, my problem is stiff and not so easy pulling the clutch, i just change the fluid 5.1 and take off all air bubbles but still its stiff littlebit i wont to be softer (ktm exc-f 450 19) thank you

@MotocrossHideout Год назад

That bike is naturally going to have a stiffer pull because the clutch springs are stiffer so that it doesn't slip. I recommend checking out the Midwest Mountain Engineering lever to make it easier to pull: midwestme.com/

@w900kw2 4 месяца назад

2021 crf250r shifter feels stiff? Deff alot of more harder than my quad

@MotocrossHideout 4 месяца назад

How many hours does the bike have? Maybe it's not fully broken in yet.

@eddyberg7438 4 месяца назад

Hey I have a 2013 Honda crf 250r. When I’m riding, I get high rpms really fast and my top speed is very slow. A 150 can keep up with me. Any ideas or advice as to why?

@MotocrossHideout 4 месяца назад

Perhaps the clutch is slipping. Check out this video on adjusting it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html If that doesn't fix it, then it might just need new clutch plates if they're slipping (sounds/feels like you're hitting neutral when accelerating in gear).

@jakeundocumented8935 5 месяцев назад

when i put my bike into gear and have the clutch pulled all the way in it stalls, i have tightened the clutch perch fully and loosened it fully, any tips?

@tomterry7871 5 месяцев назад

How did you sort this? Having the same problem

@MotocrossHideout 5 месяцев назад

Do you have the proper amount of freeplay that I cover in this video? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html If so, does it get better when the engine is fully warmed up? It could just be dirty oil that's causing the clutch plates to stick together, especially when the engine is cold.

@brendonchase9460 5 месяцев назад

Great tips and advice 👌

@MotocrossHideout 5 месяцев назад

You're welcome - thanks for watching, Brendon!

@landonyates250 2 месяца назад

So whenever I put my bike into 1st or any gear I have the clutch in and it stalls but it never did that before but then I give it more gas and it doesn’t stall but it’s almost like the clutch isn’t there because it just wants to move I and I don’t want the bike to move like that because I need to break and stop so how do I get that to stop happening and to where the clutch can be free and work good? Please respond I need help

@MotocrossHideout 2 месяца назад

Watch this first: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3NdX9bWZgFk.html Otherwise it could be old/sticky oil. Changing the oil or using a motorcycle specific oil for wet clutches can help. Or it could be warped clutch plates from getting too hot.

@sb10180 5 месяцев назад

what if my bike creeps forward, and its hard to go into second and neutral

@MotocrossHideout 5 месяцев назад

Watch this and let us know if that helps: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html

@user-jq4ub1ie7l 4 месяца назад

Ive got a yamaha dtr 125 bike ran 50+miles now all it does is fires up in neutral i can pull clutch in but soon as i select a gear it just shuts off

@MotocrossHideout 4 месяца назад

Have you tried adjusting the clutch cable? Check this video out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html Otherwise, the clutch plates might be getting warped, which is common after a lot of hours.

@user-jq4ub1ie7l 4 месяца назад

Clutch cable is good 1 finger pull but clutch plates were sticking soo orderd a new 1

@maximethiels4701 Год назад

Hello, I have a KX 85, it starts and runs, however when I put it in gear and release the clutch it stalls. Already replaced the clutch plates but still stays the same, also tried adjusting the clutch but doesn't work either. When I try it on the bike stand it does work.

@MotocrossHideout Год назад

So it stalls when you're trying to start moving in first gear? It was doing the same thing before replacing the clutch plates?

@robertbeattie8503 5 месяцев назад

Hi my young lad was at the track the day he hit a jump in 2nd it sounded like the bike went into nutril parked it up the gear lever wuden move finly got it going again wude go into first but not 2nd any idears what coud be the problem thanks

@MotocrossHideout 5 месяцев назад

Hey Robert, is that on the KTM 50? Any chance the bike has been tipped over on the left side before that happened?

@user-kn9fb3uh4o 10 месяцев назад

My bike wont roll in nuetral, even when i pull in the clutch. I was going 60+ when the engine immediately stoped and the back wheel locked, took forever to get it started again and it did it again when i shifted into 2nd. It wouldnt shift at all for a min, but after sitting for a lil i got it into 1st, any ideas?

@MotocrossHideout 10 месяцев назад

Hate to say it, but it sounds like the engine might have temporarily seized and then cooled down and unlocked enough to move and start again. Hard to know for sure, but that's what it sounds like to me.

@littleuplidl103 10 месяцев назад

My bike starts and goes through all gears but when I let go of clutch it’s asif I still have it pulled in and bike wont move

@MotocrossHideout 10 месяцев назад

Hmm, that doesn't make sense to me... You can ride it in every gear but the bike also won't move when you let the clutch out?

@PKPK-vs6vy Год назад

Problem im having with 2012 crf250r is when i shift in to gear i no longer need to hold my clutch the bike just runs and drives with out me pulling clutch any reason it would do that but other than that weird thing no issues rides fine

@MotocrossHideout Год назад

So are you saying that pulling in the clutch lever doesn't do anything - it doesn't disengage the clutch? If that's the case, then the clutch cable either needs major adjustment, or something isn't right internally.

@jakeundocumented8935 Год назад

I see you respond to a lot of your comments and was wondering if you could help me, i have a yz85 and just ordered a new clutch kit, in first gear it almost feels notchy at the powerband, and when I stall it in the trails on a hill it will move back a foot then stop(while in gear and off clutch not pulled in) then move again and stop. Feels good riding normally but since my last ride first gear almost felt like it had a neutral 55-65% throttle. It cut out on moving the bike not the throttle. If that makes sense. Have engine oil coming I haven’t changed it in a while but I’m doing that when I put the new clutch in. Should I replace the basket as well? Would that be the cause of it moving in gear and off? Thank you any help is appreciated.

@MotocrossHideout Год назад

Hard to know for sure over text. Sounds like it's slipping under heavy acceleration, making it feel like a false neutral, right? Might just be worn/old clutch plates. If the basket isn't notched/has grooves then I wouldn't replace it.

@JOR15 3 месяца назад

Hello, can u help me? I just increased my compression by rotating the bolt but now my clutch is weaker, when i put it on gear and still hold the clutch lever at maximum , if i put much rpm i can slowly go even if i pulled my clutch, could u help me?

@MotocrossHideout 3 месяца назад

Sounds like the clutch is grabbing/dragging. If the cable is properly adjusted, it might be old/sticky oil or worn/warped clutch plates.

@JOR15 3 месяца назад

@@MotocrossHideout thank you!

@blq6702 7 месяцев назад

I have a yamaha dt 50cc and it runs normally but when i pull the clutch in and put it on first gear it just stalls and is basically the same if i just didn’t pull the clutch in at all. Are my plates just worn off or something else?

@MotocrossHideout 6 месяцев назад

They could be warped from overheating, yes, but first watch this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html

@Listmonke334 3 месяца назад

My clutch on my bike is super loose but the cord is still attached any ideas

@MotocrossHideout 3 месяца назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html If that doesn't fix the loose slack, then it's probably time for a new cable.

@YPCRaul Год назад

just picked up a bike yesterday (Xpro storm 150 2022) and got it running changed oil and sparkplug , but when i have the clutch in and try to go into first gear and release then go for the throttle the bike just instantly dies smh

@MotocrossHideout Год назад

Check out this video and let me know what you think: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-APJFF5srUNA.html

@TCG-LEVICRIM 2 месяца назад

i ride a 2022 klx 300r and every time i hold in the clutch it like stalls neutral but it still does the same in any ideas on the problem

@MotocrossHideout 2 месяца назад

So it stalls every time you pull in the clutch? If there's a clutch safety switch on the clutch perch, make sure it's properly connected.

@TCG-LEVICRIM 2 месяца назад

@@MotocrossHideout tysm

@robbell7755 4 месяца назад

My bike just started making a loud sound when I kick start it. When I let the clutch out. It begins to whine. Whenever my clutch is engaged. The noise stops.

@MotocrossHideout 4 месяца назад

If it wasn't making it before, I would look into it. It could be something loose/worn in the clutch or could be a bearing going out in the engine. Hard to say over text. Let us know what you find.

@JCopyy Год назад

i bought a 2017 ktm sxf250 yesterday, it was all good but today my clutch started dragging after oil change, cant even put in gear, stalls right away

@MotocrossHideout Год назад

Sorry to hear that! Was it dragging at all before? What oil did you use?

@Haze-derr 6 месяцев назад

Question when i pull my clutch it sounds like the bolts are scraping the casing how do i sort this

@MotocrossHideout 6 месяцев назад

I would pop the clutch cover off and check before riding again.

@latiajuana2953 7 месяцев назад

I encountered a problem today on my 2010 yz450f almost felt like if my chain was skipping teeth on my sprocket but that was not the case any idea what I’m experiencing?

@MotocrossHideout 7 месяцев назад

You checked both sprockets? Did you check the chain tension? Are the adjuster blocks even (so the wheel and chain are straight)?

@masonolson4374 10 месяцев назад

I just finished rebuilding my 2010 crf250r and I was test riding it the other couple days and my clutch was slipping out of neutral and when I put it into neutral after an hour long ride it made an awful calling noise or like a grind, does this mean I have to replace my clutch and gear or is this a replace the fibres issue?

@MotocrossHideout 10 месяцев назад

Hard to know without more info. Best bet is to probably just pop the clutch cover off and inspect.

@JamesMcGraw-ph1el 8 месяцев назад

I have a little 125 and it jumps when i put it in gear but doesn't drag afterwards, any advice?

@MotocrossHideout 8 месяцев назад

Hey James, it's hard to know for sure. It could be the clutch plates sticking - perhaps old or the wrong type of oil.

@milkmaster7787 5 месяцев назад

When I rev my bike to do a hole shot and dump the clutch I hear this metal shinking noise idk how to explain it but it shifts fine and it doesn’t slip. My front sprocket it a little worn down but what do you think it is?

@MotocrossHideout 5 месяцев назад

Hard to say over text. What does "a little worn" look like? Is the chain properly tensioned? Have you pulled the clutch cover off to see if everything is still tight/intact?

@milkmaster7787 5 месяцев назад

@@MotocrossHideout the front sprocket was definitely flipped around to get some more life out of it from the previous owner so it looks shaved off on both sides and the chain was properly tensioned before that noise happened but I have not pulled the cover off yet

@MotocrossHideout 5 месяцев назад

@@milkmaster7787 If it's been flipped around, then it's time for new sprockets.

@ginoasci2876 6 месяцев назад

What if the motorcycle is new and it works great, then it goes in for the first service at 600 miles, and the clutch hose in first gear only as you let it out ?

@MotocrossHideout 6 месяцев назад

The clutch hose?

@ginoasci2876 5 месяцев назад

@@MotocrossHideout : what is the clutch hose ?

@killersteven1991 Год назад

I have a problem that's different to all of these. My bike starts and runs fine but when I pull the clutch in, put it into gear, release the clutch I hear this clicking sound and no drive.

@killersteven1991 Год назад

The bike sounds healthy when in neutral.

@MotocrossHideout Год назад

Hey Steven, what bike is it? Did you change or do anything to it recently?

@killersteven1991 Год назад

Bike is a yamaha yfm 350cc. After alot of head scratching it was the forward and reverse selector not engaging properly.

@MotocrossHideout Год назад

Gotcha. So did you get it fixed and working then?

@killersteven1991 Год назад

Yeah its going, I need to spend a weekend on it tho and take apart the selector because it's real stiff, just give it a clean and some new grease and see if that fixes how hard it is to select forward and reverse. Thanks for your replys. :)

@weston5146 Год назад

when bike is on stand is it normal for the wheel to spin kinda fast? its a 23 fc250 hydraulic clutch, has 30 hours on it and my 21 yz125 has over 125 hours or more and the clutch is all oringinal and gets abused yet is in perfect condition. was wondering because i think its kind of odd

@MotocrossHideout Год назад

Your Husky free spins on the stand while in neutral?

@bhavdeepcheema6068 11 месяцев назад

Hi my friend my problem is that my dirt bike rides fine but there a little problem with shifting but when I’m driving it and I pull the clutch in it just turns off any solution brother

@MotocrossHideout 11 месяцев назад

So the engine dies when you pull in the clutch? If there's a safety switch on the clutch lever going down to the engine, I'd check that connection first.

@Dirt_bklf 11 месяцев назад

Hello yeah so when i start my bike when its cold i put it in gear with clutch in it stalls however if i warm it up and if i start it up when its warmed up i can put it in 1 geat just fine another thing even if its warm and i stall it on any gear and when i start it up with the clutch pulled in it just starts going even if the clutch is pulled in

@MotocrossHideout 11 месяцев назад

Sounds like the clutch is sticking and grabbing when it cools down. Using a different oil that's more slippery could help, or just changing it more often.

@Dirt_bklf 11 месяцев назад

@@MotocrossHideout ok il try that thanks!

@Dirt_bklf 11 месяцев назад

@@MotocrossHideout hello i changed the oil but i still have the same problem however i am working on a Aprilia RS 125 2stroke thats Ben sitting for 6 years not being started could it be that the clutch plates are stuck together from the old oil?

@MotocrossHideout 11 месяцев назад

That's definitely possible. I had a similar problem with my GasGas trials bike. Using a super slippery and lightweight oil with fresh clutch plates made the most difference. Even after a few hours they would start sticking again. It was a hydraulic clutch, so that could also be a part of it if it's not functioning 100%.

@Dirt_bklf 11 месяцев назад

@@MotocrossHideout could you give me ant tips on how to fix this and prevent it?

@clausdaboss3220 9 месяцев назад

I have a question, I hear a weird spinning sound, almost rattle when I put my head to the bottom of the left side of my bike. Is this clutch or trans related? No symptoms other than that.

@MotocrossHideout 9 месяцев назад

Hard to know for sure over text. Depends on the bike and when exactly it's happening.

@renko1996 Год назад

hello my friend, i have a Beta 400rr 2010 and i have a problem :( when i start the bike (cold start or not), pull the clutch and get the 1 gear, start moving even with the clutch pull! Someone can tell me the problem? about the other gear no problem, everething works

@MotocrossHideout Год назад

Hey Alberto, so are you saying that it's moving forward when you put it in gear with the clutch pulled in? Is it a hydraulic or cable clutch?

@zvonimirskvorc3006 Год назад

This so called clutch creep that he mentioned as the first problem is what bothers me right now and I don't know how to fix that and another thing is I can't transport my bike to a workshop so I'm kind of stuck

@MotocrossHideout Год назад

Hey Zvonimir, did you already try the things I mentioned in this vid? I highly recommend buying an OEM service manual for your bike if you plan on working on it yourself - they're super helpful with step-by-step tutorials and specs for tuning and maintaining your bike.

@giannisskretas1558 6 месяцев назад

My bikes clutch is hydraulic and every time it’s cold and put the 1st gear is turning off and then when it’s hot I can’t find the neutral

@MotocrossHideout 6 месяцев назад

Sounds like a KTM... It could also be the oil you're using - too old or not made for a wet clutch?

@giannisskretas1558 6 месяцев назад

@@MotocrossHideout yes it’s a KTM! If it’s not the oil??

@jorywinberg9415 11 месяцев назад

hi i just bought a kx85 but out of nowhere first gear disappeared and when i put it in neutral it flies up into gear. Can i get some help😊

@MotocrossHideout 11 месяцев назад

Hey Jory, congrats on your new bike! Check out this video to make sure you're properly finding neutral: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tFzgM30vnJo.html

@timmy4468 Год назад

Need help before I go purchase a new clutch. My sons Crf 250r, when releasing the clutch the friction point seems far away from full open position if that makes sense. Plus the other day I started it in first and it wanted to creep for a split second even with the clutch fully engaged. Also. I had it in gear with the bike off and pulled the clutch in to roll it and the back tyre was just sliding. 😢. Do I need a new clutch plate or could this be fixed by some adjusting ??? Please help cheers

@MotocrossHideout Год назад

The last part sounds normal. Have you already tried adjusting the cable so that there's a proper amount of slack? If so, I would just pop the clutch cover off and inspect the clutch. It doesn't take long. The clutch is a maintenance item anyway, so it's pretty common to replace the plates on a race bike.

@jonathanoliva6553 11 месяцев назад

Thanks now surely i will go to mechanics to fix the clutch of my mc😂😂

@MotocrossHideout 11 месяцев назад

Sorry to be the bearer of bad news!!

@Mac-bn Год назад

nice content, need your advice, my CRF250L when i engage 1st gear without releasing it, the motor moves a little, whats the problem with it, where should i adjust?

@MotocrossHideout Год назад

Thanks! Sounds like the clutch perch might need to be adjusted so that you can fully disengage the clutch. Otherwise your clutch plates could be warped, causing clutch drag. I cover that more in my article here: motocrosshideout.com/dirt-bike-clutch-dragging/ Looks like you were having fun practicing some log hopping last week ;)

@Mac-bn Год назад

@@MotocrossHideout Thank you for your reply and visiting my YT. As you can see, my log hopping practice and wheelie lead to my clutch problems. So I keep on adjusting it. The article was very useful to me thanks for sharing it.

@alexmills9106 7 месяцев назад

I have a crf250x and i was riding the other day and all of a sudden i have 6 neutrals after a bit it fixes itself and back to normal and it does that a couple more times. The clutch also drags alot when pulled in starting to move the bike. Are these worn out clutch in need of replacing symptoms?

@MotocrossHideout 7 месяцев назад

I would pop the clutch cover off and inspect. There's definitely something wrong. Hopefully it's a minor clutch problem and not a major transmission issue. On a side note, did the bike recently fall over on its left side?

@alexmills9106 7 месяцев назад

@MotocrossHideout thanks for that will have to check it out. Hasn't fallen on its left side recently

@user-wv8me1gy6x 7 месяцев назад

Pitbike starts fine goes in gear but is in limp mode moves a little but full on limp mode please help

@MotocrossHideout 7 месяцев назад

Did anything happen before the bike started doing this? What bike?

@jallaeo978 Год назад

When i ride and i want to stop and im in gear, pulling the cluth fully doesnt make the bike stop, it slowely goes foward.

@thegreatgamer2983 Год назад

I’m having the same problem when I’m stopped and I put it into first the bike wants to go a little bit

@MotocrossHideout Год назад

Sounds like the clutch is still grabbing. I'd first try adjusting the clutch cable at the lever perch so that there's very little slack.

@CarlMont3 Год назад

Do you think a problem with my idle not being able to go lower might be because of a clutch problem? Also while I was in fifth gear it suddenly disengaged and went to neutral

@MotocrossHideout Год назад

If your idle is too high in neutral, then the clutch doesn't have anything to do with it. If you were accelerating in 5th gear, it could've slipped, making it feel like neutral. Hard to know over text.

@kgmxtraining250 10 месяцев назад

Most likely carb related if you have one. what kind of bike? Air leaks can also cause a high idle. If you have a throttle body like on the ktm's with the yellow knob at the bottom then try backing that knob out (counterclockwise) as far as you can til it stops.

@Curtis86 2 месяца назад

I put a new 125cc engine in a dirt bike and it ran great for a couple of days and now it feels like it is slipping when I give it more than half throttle.

@MotocrossHideout 2 месяца назад

Sounds like the clutch is slipping. Is the clutch cable properly adjusted? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html

@Curtis86 2 месяца назад

@@MotocrossHideout ,thanks for the reply. I have the cable adjusted to the best of my knowledge, and even tried it a little tighter and a little more loose than what seems right. I guess I need to open it up and take a look at the clutch plates

@Curtis86 2 месяца назад

@@MotocrossHideout honestly, it's kinda odd how it acts. At first, it seems like the clutch isn't fully engaging. It's hard to find neutral while it it running. It also acts like it wants to jump forward just slightly when you put it in gear, which seems opposite of how it's doing on the top end.🤷🏻‍♂️ It takes off good, with good throttle response, but once you give it some juice, the rmp's jump and it barely pulls.

@MotocrossHideout 2 месяца назад

@@Curtis86 Hmm, yeah it sounds like it's dragging at idle (which is fairly common and could be an easy fix), but also slipping at high RPM under heavy load. I 2nd checking the plates. Make sure they metal discs are flat and not discolored, and that the fiber plates are within thickness spec. Also, check that there are proper numbers for each plate and in the correct order.

@Curtis86 2 месяца назад

@@MotocrossHideout will do. Thanks again. I'm sure I'll be back for an update/more questions. Lol

@robertcheney6753 8 месяцев назад

Hello I have a 2008 ktm 200 xcw Hydraulic clutch I’ve gone through the master and slave cylinders. Bled the system inspected the plates and basket and it will still not disengage any ideas ? Thank you

@MotocrossHideout 8 месяцев назад

Hey Robert, I can imagine your frustration... So you rebuilt the master and slave cylinders with new parts? When did it start doing this? Also, how much pressure does the lever have when you pull it in?

@robertcheney6753 8 месяцев назад

@@MotocrossHideout , yes rebuilt with new parts new gaskets etc , I finally got the clutch bled and I have just a bit of free play on lever if I am looking at the clutch plates they move a little The lever has a good firm feel I can feel the difference when the air gets out since I’ve bled it several times so I’m just wondering what I should test into next I took the push rod out seems fine so I’m stumped

@robertcheney6753 8 месяцев назад

The lever is firm but not hard to pull I’m assuming it is bled there are no bubbles coming out the bleeder. However if I look into the master and pump the clutch there are tiny tiny bubbles coming up I don’t know if that is a leak or what also on the slave I tried the thin gasket and the medium gasket seemed the same Thanks for reading

@MotocrossHideout 8 месяцев назад

If there's still bubbles coming up then it's probably not done bleeding the air out. Those lines can be a pain in the butt to bleed.

@robertcheney6753 8 месяцев назад

@@MotocrossHideout ok will do the mineral oil clutch fluid is expensive lol Thanks for your insight

@shadevelt 11 месяцев назад

my bike used to slip while giving full throttle, i guess its because not good adjusted clutch cable

@MotocrossHideout 11 месяцев назад

Definitely possible.

@newwavepressure6478 5 месяцев назад

Mine cluch grabs when its all the way out almost

@MotocrossHideout 5 месяцев назад

Sounds like the clutch needs to be adjusted or replaced. Check out this vid first: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html

@2025944 3 месяца назад

My clutch grips more the hotter it gets not less I can’t find anything on it? I put a new clutch in it but it was like 50 bucks if I remember right

@MotocrossHideout 3 месяца назад

Did you replace the metal discs as well as the fibers? Clutch plates expand as they get hotter, which can make them feel more "grabby", especially on a KTM since they tend to have less of a gap between the plates. Make sure you're using oil that's made for a "wet clutch" as well.

@2025944 3 месяца назад

@@MotocrossHideout it came with the metal discs but if i remember right i think it had more fibers and metal discs than the oem i took off it also had heavier springs i think

@MotocrossHideout 2 месяца назад

Did you measure them and check the flatness? Heavier springs are going to put more pressure on the plates so they won't slip as easily and can take more abuse.

@ThugCrow Год назад

1:32 Here it dose sound like my issue but the clutch was recently replaced could that be caused from a wrong install? Also after 10-20 minutes of riding the issue go's away

@MotocrossHideout Год назад

Did this problem start happening only after it was replaced?

@ThugCrow Год назад

@MotocrossHideout unknown I bought it off a guy 2weeks ago he told me he replaced it so I'm thinking he may have done it incorrectly

@GetDrifty. 5 часов назад

@ThugCrow yeh I've seen comments on clutch replacements and a new issue after replacement.

@laser5394 10 месяцев назад

I just replaced the clutch on my bike and now it's making knocking sounds, the sound happens wether or not the clutch is engaged and seems to lessen when the bike is revved a little. I've checked the timing and the valves and the clutch basket. The basket doesn't have a lot of play though I did notice some play. The only thing I really noticed is that one of the oil pump gears had a little bit of play. The bike seems to get hot really fast and I even saw a little bit of smoke after the bike was on for a few seconds. Could it be an oil pump problem somehow?

@MotocrossHideout 10 месяцев назад

Hard to say over text. If it were me and there were no weird sounds before replacing the clutch, I would take the clutch apart and make sure everything is properly installed in the right order with no missing parts and that it's all torqued to OEM specs.

@laser5394 10 месяцев назад

@@MotocrossHideout that's what I did but I guess I'll go through it again, I might end up splitting the cases at this point and just making sure everything is good, I hope I don't have to do that though

@MotocrossHideout 10 месяцев назад

It's hard for me to help diagnose without seeing and hearing it, so I'm just going off of what it sounds like you're saying. When you say that the sound started only after replacing the clutch, that makes me think that something from the clutch is causing it, but I could be wrong. Does that make sense?

@laser5394 10 месяцев назад

@@MotocrossHideout yeah, it's just really being weird, I'll figure it out but rn I'm just kinda left scratching my head

@B3N017 Год назад

My problem is that when i let go off the clutch there is a wining sound even when im riding dont know if its bad or if can still ride it??

@MotocrossHideout Год назад

What bike and has it always made the whining sound?

@B3N017 Год назад

@@MotocrossHideout its 2005 crf230f and its been doing it since i got it i have seen a few videos of other 230 that have the same issue but mine seems to be a bit louder.

@MotocrossHideout Год назад

If it's coming from the clutch and it isn't getting louder then it's probably not a major issue, but if you want it to be reliable, I would remove and inspect all the clutch parts. This guy sounds like the same problem and it turned out to be the clutch basket: www.thumpertalk.com/forums/topic/1187333-help-engine-whine/

@B3N017 Год назад

@@MotocrossHideout thanks for the help!!

@MotocrossHideout Год назад

@@B3N017 You're welcome. Please share with your friends or family that are getting into dirt biking - I'd really appreciate it!

@patrickjohnson3212 6 месяцев назад

I have a 98 rm 125 that I just did a full rebuild on, but I did not replace the clutch as the plates looked fine. Randomly out of nowhere after riding a couple of times the bike wanted to go full speed in gear with the clutch pulled in. This happened one time after just starting up and it has not gone away.

@MotocrossHideout 6 месяцев назад

Is the throttle cable binding/twisting? Could also be an air leak from loose carb clamps.

@frankmajewski-tw4vv Год назад

When I put my bike into 1st gear sometimes it will just stall out but not every time but as long as I keep a little throttle on it it won’t. And when I pull the clutch in to roll down a hill it most of the time sounds like the clutch isn’t fully engaged. Also I will come to a stop with clutch pulled in on flat ground and it will inch forward anyway but it doesn’t happen all the time. Is my clutch worn or do i need to mess with the cable

@MotocrossHideout Год назад

I'd definitely start by adjusting the cable since that's easy to do. Loosen the locknut and turn the small knob out until there's just a tiny by of play/wiggle in the lever before it gets tight, then tighten the locknut again. Let me know how it goes!

@frankmajewski-tw4vv Год назад

@@MotocrossHideout thanks for the feedback, I will let you know how it goes

@frankmajewski-tw4vv 11 месяцев назад

@@MotocrossHideout I tried adjusting the cable, but it didn’t make any difference.

@MotocrossHideout 11 месяцев назад

@@frankmajewski-tw4vv What bike is it and how much freeplay/wiggle does the cable have before it starts building tension?

@frankmajewski-tw4vv 11 месяцев назад

@@MotocrossHideout it’s a 2004 Yz125 and I adjusted it so it only has a tiny bit of wiggle

@Brandon112-85 7 месяцев назад

I have the cluch all the way in and shift down and it stalls

@MotocrossHideout 7 месяцев назад

Check out this video first: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html

@Kieran-fj4bq Год назад

i have a problem where the clutch is dragging and doesnt want to change gears. the bike also idles lower than usual in any gear (including neutral), the revs drop down way faster than they should when clutch is pulled in (again in any gear), and the bike trys to move/drive itself forward when the clutch is pulled (again in any gear). I have got new friction plates coming in the post and hoping that will fix the issue. the engine oil was replaced 4 days ago and i put a little too much in, i hope this aint the reason why the clutch has gone but will have to see. if anyone has had this issue and fixed it, please let me know

@MotocrossHideout Год назад

Have you tried adjusting the clutch cable, Kieran?

@Kieran-fj4bq Год назад

I have adjusted it from loosest to tightest with no luck

@Lewis.0 11 месяцев назад

My clutch pops when I pull it in sometimes I think it a spring in the engine or something any ideas?

@MotocrossHideout 11 месяцев назад

Hey Lewis, could you go into a little more detail? What exactly do you mean when you say it "pops when I pull it in sometimes"?

@Lewis.0 11 месяцев назад

@@MotocrossHideout I think the clutch is not engaging right. Could it be a clutch spring or something internal ? Thanks

@MotocrossHideout 11 месяцев назад

Has it always done this? What bike?

@Lewis.0 11 месяцев назад

@@MotocrossHideout my crf 100 we bought it the other day

@MotocrossHideout 11 месяцев назад

Okay, gotcha - congrats on your new bike! It's hard to say over text, but it could be a worn clutch basket. First, have you tried adjusting the clutch cable?

@carternowacki975 Год назад

when i put my bike into gear and have the clutch pulled in the bike still wants to move, do you know what the solution is?

@MotocrossHideout Год назад

Did you try adjusting the clutch cable, Carter?

@Mac-bn Год назад

yes same goes to my CRF250L

@brendon8702 Год назад

Mine did that and I had to hold it with the brake… a new clutch basket solved the issue for me.. mine was notched/grooved but even though the clutch discs seemed to slide fine on the basket fingers when I slid the plates by hand.. the problem never stopped till I got the new clutch basket

@robertdelinsky7247 3 месяца назад

bike dosent move till clutch is almost all the way out?

@MotocrossHideout 3 месяца назад

Some bikes have a smaller "friction zone" than others, but that's also a sign that the clutch plates are due for replacement soon.

@robertdelinsky7247 3 месяца назад

@@MotocrossHideout ive replaced not long ago with dp clutch kit. U think my cable could b stretched out it is a old sunline cable but pulls good no fraying

@MotocrossHideout 3 месяца назад

@@robertdelinsky7247 Watch this for proper cable adjustment: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html If you can't get it properly adjusted, then it's due for a new cable.

@MotocrossHideout Год назад

Learn how to quickly improve your clutch control with 3 simple tips in my video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-APJFF5srUNA.html

@charlottemarie666 4 месяца назад

Hi I'm having a bit of a problem with my 110 pit bike basically when I ride it it's like someone is pulling on the clutch cable.

@MotocrossHideout 4 месяца назад

@@charlottemarie666 Hey Charlotte, check out this video and let me know if that helps: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xGXXff7-2VY.html

@wudangmountain3802 6 месяцев назад

Hi. I just installed a new clutch basket, Rekluse Core Manual clutch, and new slave cylinder in my 2013 KTM 450 EXC. When I start riding the bike it runs like a top. shifting is smooth and flawless. But after an hour or so when the engine is hot the clutch slips on acceleration in lower gears. If I stop long enough to let the engine cool down quite a bit, the clutch works just fine again. I've tried adjusting the free play of the lever many times and it doesn't seem to solve the problem. Any ideas what might be the problem? thanks.

@MotocrossHideout 6 месяцев назад

Sorry to hear about your clutch issue. What oil are you using for the transmission? Have you tried contacting Rekluse about this?

@wudangmountain3802 6 месяцев назад

@@MotocrossHideout its a 4 stroke so I'm running 100% synthetic oil 20w 50 I think. Rekluse has been non-responsive to 3 emails and I got a recorded message when I called but I'll keep trying to reach them. I know the issue is not too uncommon so Rekluse should be able to help once I get through. Thanks again..

@MotocrossHideout 6 месяцев назад

@wudangmountain3802 is it a motorcycle specific oil made for wet clutch? Or does it have a JASO certification? I think Rekluse recommends Rotella oil.

@MohammadA-jo4gp 4 месяца назад

Hi whenever i pull my clutch in and try move it whilst it’s in gear it does not move at all and just is really hard to move i’ve replaced my clutch line and it’s still the same do you know what’s wrong ?

@MotocrossHideout 4 месяца назад

With the engine on or off? There's always going to be at least 'some' clutch drag if it's in gear, even with the clutch pulled in. I hope that's what you're asking about.

@Cruizerdoesit 4 месяца назад

@@MotocrossHideoutthat's what I'm asking too I guess I'll just start it and try it even tho I pop started bikes before and it never had drag like this lol it's always the screw with the lock nut I can adjust too right

@TS-tv7uz Год назад

Hey i have a problem with my sx250,when in neutral i pull the clutch the bike turns off,and when i ride and pull clutch and give throttle the bike still goes it doesnt stop completly ,can you help me to solve this problem,thanks.

@MotocrossHideout Год назад

Sounds like the clutch isn't fully disengaging. I think that has a hydraulic clutch, right? Have you tried bleeding the clutch? If the lever is working properly, then I would properly take the clutch cover off to inspect the plates and basket for wear or damage.

@thatsthetruth7489 Год назад

I have a 2002 crf450r and if i put it in gear when the bike is off and pull the clutch in it does move still as if the clutch is not pulled in when bike is running i have no issues any idea ?

@MotocrossHideout Год назад

Maybe I'm just a little groggy on Monday (lol), but I'm having a hard time understanding your comment... So are you saying that pulling the clutch in with the engine running doesn't do anything?

@thatsthetruth7489 Год назад

Clutch only works with engine running while off if I pull clutch in while in gear it's as if clutch is not pulled in

@MotocrossHideout Год назад

It's common for there to be a little bit of clutch drag if it's in gear with the engine off and the clutch pulled in. If the clutch works well when the engine is running then I don't think I'd worry about it.

@bexxwalter4089 11 месяцев назад

Hey my problem is when i pull my clutch lever it makes a humming sound and when i engage into 1st gear my bike stalls , iv tried adjusting lever , grinding basket and still having the same problem . Any help please ?? Bike is a 2013 Rmz 250.

@MotocrossHideout 11 месяцев назад

When did it start doing this? Did you do anything to the bike before it started happening?