6 Simple Design Tricks for Touch Screen Enclosure using Fusion 360

Подписаться 69 тыс.

Просмотров 7 тыс.

50% 1

#sponsored Here are 6 more simple an effective design tips and tricks for creating an enclosure or mount for a TFT touch screen or other interface for your 3D printer using fusion 360.
Timestamps
0:00 Intro
0:26 Reference Geometry
1:20 Use Existing Features and Fixings
2:34 Avoid Screen Contact
3:10 Don't Over Complicate it
4:00 Self Tapping with Machine Screws
4:49 Give Yourself Some Slack
6:27 Plan to Print Face Down
7:14 Print and Assembly
8:35 Summary and Outro
Upgrade Guide for Hemera (Reference Geometry Guide): • Upgrade your Printer t...
[Purchase Link]
Bigtreetech TFT 35 V3: uk.banggood.com/custlink/vDGR...
Note: Affiliate links tell the shop that I sent you. If you purchase, it costs you nothing extra, but I get a small cut from the seller which helps support the channel and allows me to take time to make great videos for you to watch.
[printed file links]
www.vector3d.co.uk/downloads
Patreon: / vector3d
Twitter: @Adam_V3D
V3D Discord: / discord
V3D Merch: vector3d.co.uk/product-catego...
Instagram: @Adam_V3D
Gear: www.vector3d.co.uk/my-gear
Blog: www.vector3d.co.uk/blog
Website: vector3d.co.uk/

Наука

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@avejst 4 года назад

Great intro/walkthrough Thanks for sharing :-)

@swamihuman9395 4 года назад

Thx, Adam. Another well-thought-out and presented vid.

@swamihuman9395 4 года назад

BTW, I noticed something new (I think) about timestamps/labels: they now appear in the time slider/scrubber! Little breaks to indicate timestamp location have been there for a while, but now, as the vid plays, the label appears, and when scrubbing, the label appears as well. Nice.

@certified-forklifter 4 года назад

i designed a case for my tft24, it turned out good. but i think it is a bit tight, so your tips would have been very helpful. thanks for sharing! :D

@certified-forklifter 4 года назад

you got some nice allen keys there ;)

@certified-forklifter 4 года назад

cool

@Lion_McLionhead Год назад

Never figured out how to get those damn T nuts to go in extruded rods without rotating out of position.

@mikemike7001 4 года назад

Nicely done as usual, but - oh no - there's a superfluous pointer line on the knob!

@swamihuman9395 4 года назад

On a technical note (pet peeve?): "tolerance", and "clearance" are often interchanged, but are technically different. You're a smart guy, so I suspect you actually know the distinction, but are just a little loose at times (though, not like you, typically). Most often, when one misuses the term and says "tolerance", they should use "clearance". CLEARANCE is the design intent spacing between surfaces (or "gap") to result in a desired fit (from loose to tight). TOLERANCE is the ability of a machine to produced a desired dimension (length, angle, roundness, etc.). To be clear, people are not "doing it wrong" when they conflate terminology, at least when not communicating with/among engineers. OK, just hoping to make a clarification that some people will value.

@shaunmorrissey7313 3 года назад

What happened to the live stream scheduled for today?

@Vector3DP 3 года назад

Had audio issues that made it impossible to do. I've not been able to get it working yet.

@AndrewAHayes 4 года назад

I am really surprised that no-one in the community has designed a Bluetooth enabled screen and controller, the ones with onboard processing are ideal for this.

@peter.stimpel 4 года назад

Seems I can do a FIRST, and add something. There is a page called grabcad.com where you can find many technical stuff and components, ready to be imported into Fusion360. Maybe the display or some knobs and stuff are available already, to design around. Saves some time ...

@dphillips9641 4 года назад

Beat me to it. Grabcad is a fantastic resource, I rarely have to create my own reference components.

@bbowling4979 3 года назад

I was wondering if these reference parts already existed somewhere so that I could just import them into my drawing. Thanks so much for sharing that info!

@Vector3DP 3 года назад

Yep, it's great. But I'd still recommend double checking dimensions yourself as they can be poorly measured.

@bbowling4979 3 года назад

Absolutely. Trust but verify.