9.31 147 In a STOCK Appearing L88 Corvette! Setting Records in A BORROWED Car with BORROWED Engine! 

respect ! constant 9:31 @ 146 !!! in a 50 years old car !! thats corvette !

9.30 147MPH That is moving out Guys. nice Job!

Got it back running, and even little faster. Stock looking cars that are kick a$$ fast are the best races..

Congratulations Jordan and team! I have been on a few race teams and it definitely takes a lot of people to get you to the winner’s circle. My engine builder had a bunch of NHRA records in AS/A and he ran a 69 Camaro. Good luck finding the power loss.

Ryan putting some numbers down.. a low 12 in that Corvette is Flying!!!

I'm just looking at it from an observer's perspective but that thing looks like one of the best handling 9sec. vintage street drag cars I've ever seen. Looks like you wouldn't have any problem going down the track with a cigarette in one hand and a coffee in the other.

Congrats! The Vette's a rocket since you're not pushing a brick through the air.

Great job guys! Nobody could blame you if you built a vette, they seem to be the weapon lately. I keep hoping Dudek can find a couple tenths but we’ll see I guess. Almost forgot, the vette was doing totally legit wheelies every pass too.👍

Truth!! That motor in that far... its possed. That record - smashed! Just under chute mph...Wicked!! Keep up the good Work!

Congrats on your runs..exciting to watch

Congratulations! I really enjoy watching your videos. Keep up the good work!

I’ve been watching, participating in drag racing from around 1982. Been in a passenger seat drag racing from about 1976! This is by far, the coolest car, with true raw power I’ve ever seen! I would love to see you race this car in parson! Please keep running this car.

Amazing stuff! Great Job Jordan!

No pain no gain congratulations thanks for sharing.

Man I Love your videos, and this FAST class is my favorite I think out of all the racing! I always look forward to your next video! Congrats!

You guys are amazing with what y'all do and what you have to work with. Excellent

So inspiring to see success after struggling , " Never Say Never " !

Just found y’all’s channel. Great content! I’m new to drag racing and find your how to videos helpful. Thanks for your time

Congrats!!! That Vette is awesome!!! 👍🏻👍🏻

Anyway awesome job , congratulations!! 🎉

CONGRATS ON THE WIN AND THE NEW RECORDS!!!

congrats to all of you! i am still looking forward to see you and your orange camaro bring home one of those trophies! please don’t give up on the camaro. can’t wait to see what you figure out with the camaro and hopefully it isn’t to torn up underneath. also awesome job with the green corvette, driving and tuning, looking forward to seeing you get it in the 11’s your so close what’s next to do that hopefully some more small tuning you can do.

Way to go! New record!

Congratulations!!

Great. Job. On. The. Video. Lesli. Fantastic video. Work. Love. It. Thank. U

Love these videos, this channel ROCKS!!! ha ha ha, Larry's Vette launches doing wheelies. Ya gotta buy that Vette and perform your treatment on it. I am sure you will hit the 150 MPH mark. Remember George, the cream always rises to the top... awesome !!!

I seen you and your dad Saturday dragging trees around lol. Keep up the good content

Love it!! 😍😎💯My favorite channel on RU-vid!!

Good job, love seeing those vettes run I've always been a vette fan, I have a poor mans vette and its a fun car to drive as long as the opti doesn't fail.

Makes you wonder what would happen if you built a Vette that was as light as possible, i'm talking about a 100% tear down and scrutinizing each and every peace. Then went all out on a motor, trans and electronics. I bet you could remove a lot of weight just from making the fiberglass thinner and replacing steel items with aluminum. It's amazing how fast the cars are now but I have always worked on reducing the weight of a race car it's just free power and it also helps to reduce breakage by reducing the stress on parts. Loved the video!

Congrats on record! Stick w/Camaro for now. Amazing how fast your gone on that 9.37 run/Wilkins video at night...like your shot out of a canon!

When you made your first pass in the Corvette I was thinking to myself that you should just get a C3 Corvette , Congrats on the win. Thank You for making another video

Congratulations Jordan Pennington! The Pennington's have built some incredible machines and MY hat is off to them.

I bet the urge to build a Corvette and clean house is unreal, but man it’s awesome seeing the big steel brick run door to door with the bass boats.

My dad runs a 68 427 tri power is stock eliminator. Finally cracked the 9s with a 9.87. Yours is very impressive

I'm a big Corvette fan. Congrats !!!!! I have a 67 , 69, 82 , and a 08 Z06.

W😲W ... I was ecstatic when my '79 went a 13.30, this is crazy fast !!!

Love it. I'm hoping to get there with my 406 in my c3

Congrats! Red Corvette Getting close to one of the faster Tesla Plaid running street tires.

Congratulations ! That was Epic. I've been really enjoying your adventures. It has really opened my eyes to the level of performance of these iconic rides and the skills that you have brought to the table. A big thanks to you and your friends and family. I used to own a small block 68 Convertable 4sp Vette when I was a kid and your Dads brings me right back.

Larry try to buy the engine? ...lol Great job!!

Awesome 1/4 mile times in the Vette. Well done. Can you please do a vid sometime on the Vettes talking about any chassis mods, rear end mods. Over the years the Vette rear end hasn’t had a great reputation for being very strong. What are some of mods you guys are doing to these cars to keep them in one piece ? Cheers.

there is a 1980 vet on LI in NY that runs 9;16 at 160 . love to see these cars go fast. no one ever thought they were fast . they can be made to go fast.

I Had That Exact Same Year Corvette! 1968! Cool Yet Underraded Forgotten Year Corvette. But Mine Was Yellow With The L-36 427/390 And 4 Speed!

AWESOME VIDEO!!!

Im pressive numbers well done.

That's how muscle cars SHOULD be - sleepers!

im the same way i was told a lot you cant do that and i did and all in all i have dont and built some bad ass shit so i get it keep up the good work you got a great thing going

The Corvette is slippery through the air at 140+. That’s gonna account for something.

Stock appearing is very different than actual stock. Still a nice accomplishment and video.

35 years ago my buddy Neil was pulling 125 trap speeds in a full tilt turbo 240z had to use like 195 70 14s to keep.from breaking half shafts . I believe the Independent rear suspension is what helped it maintain what traction it had

That red Corvette is fast!

Congrats. Jordan. Awesome. Runs. I think. U. Like. A. Challenge. Don't. Give up. On. That. 69. Camaro. Can't get enough. Of. U guys. Thank. U

Funny how when I left my Camaro and bought a Corvette everyone said they wouldn't hook up @ the Drag Strip....Well my 72 LT-1 went 12.28@117MPH on its best pass...With headers and slicks but, throught the mufflers...The LT-1 ran 12.60's with iron exhaust manifolds@109MPH...Didn't do a single thing to the rear suspension but, dial up the compression to the max on the shocks....Vettes flat HOOK! I'd be interested in knowing what you guys run for an IRS? 12Bolt center or Dana 60? I've seen some of those, I build mine with whats called a "Super 10" parts kit from Tom's Differentials+Steel Cap with 1/2UNC bolts on the drivers side, its basically a bigger cross shaft and spider grear out of a later 8.5" 10 bolt rear and solid clutch packs with 100lb Posi Springs.

Congratulations. I’m thinking difference is aerodynamics Camara is a brick Looks good Good driving

Love the channel. Been following the FAST series for years - love the battles between your dad and Dave Dudek. I remember when running 11's was considered unbelievable. Question: I need a recommendation for having exhaust manifolds (small block Chevy) extrude honed. Company name, location, would be greatly appreciated. Keep up the great content!

Great video guys ,how much lighter is the vette compared to the camaro ??/

Larry is known for setting up a chassis. It looks like that car just works.. how did you like foot braking?

As far as the engine it self not making power in the Camaro I would check the fuel system , lines , pump, return filter gas tank venting and so on . Just trying to help.

That car is happy with the heart transplant, and that motor seems pretty to be there. Need to find a way to keep them together.

Very Impressive...👍💪🇺🇲

OK another great video. Great job, Jordan. Hats off to all the people you mention. Thanks for the rides. Is Larry getting his fuel from a different source than you guys?? Were you running his fuel (in the car already) at first and then started adding fuel from your source? As Larry's car started to lose MPH were you running your fuel? Just a thought. Maybe a fuel quality issue??? And of course, Great job Flyin' Ryan ! ! !

427 spinning to 8k prolly making 750hp+😍

Can't believe it either I guess the Corvette's Suspension likes a little more horsepower

youve heard the saying, " Red cars are always faster " lol

Congratulations on the fastest ET and MPH! I would say your problem in the chassis maybe

Watch teh keychaine,,, he is pulling some Gs

Great job. What's the weight difference between the Corvette and the Camaro?

On the Black Corvette with a blown head gasket , check the valve springs. Might be damaged after gasket blew. Just a guess.

Very impressive! What is the motor in the vette and what class does it run in at fast?

Congrats Jordan! Could there be an issue with either the torque converter or tranny in your ZL1? That could explain your car making way less power with that engine. You are already going to have the tranny out to repair the tail shaft, might be a good time to have the tranny gone through?

Believe it or not that vette is loading the rear tire better when it squats while STILL having good weight transfer. The camaro seems as if it's 'separating' a bit at the rearend at launch.

I'm not going to read the comments, but I just bet someone will bray and shriek about how it's better than a Hellcat. They'll be doing that for DECADES, I bet.

corvette = king of the road !!! what is the rear gear ratios in all of those vettes?

SICK ! What Rear is in the Red Vette ?

What is that camera mounted on the back that records going down the track? You cant see the mount except in the shadow

Very quick. What tire are you running? OK, I see they are Wide Oval. You are really getting good traction with those, are they a special compound?

New to your channel and content. What is the fast racing series and where can I get more information about it? Enjoyed your video! Subbing because this looks interesting. Thanks.

amazing ... bone stock looking 68 corvette "pulling the front end 4-5" bad to the bone 👍- maybe the tranny has been the problem with the camaro the whole time ? Good Luck

Tell kirkum get his checkbook out and buy that BES engine if wants to have the fastest vette .LOL

Gears tires body engine perfect match

Holy crap--that is SICK, hook-up is amazing and NO headers, is the frame strengthened i hope? You know i saw Grumpy race at NY National speedway with his 331 Vega and he was running 9.4-9.5 i think about 135? Do you feel the Corvette is more aero and the end VS the Camaro?

That car can squat on launch plus aerodynamic

Hello! How much faster would it have been if the passenger door would have been closed?

What did it run in the Camero?

Ever try to go to a old time stock drag race. Showing just how fast a stock LOOKING oldie (you Corvette and Camaro would fit right in and bet you would pick up a bunch of new subscribers) Might even pick up NEW SPONSORS!

Stupid question but whats the vacuum pump do?

Tires on rear?

Congrats man that Vette is just flyin bro. I missed it is the motor maxed out to 560 cubes? I am really impressed with the 67 too! Knocking on 11's door!

Wow!! Almost as fast as a Tesla!!

is this a original stock goodyear polyglas gt tire ???

My Favorite Year Vette's 1968-1972

And that is on hard tires? Better check those tires!

Is there a story/video on the corvette build. Really would like to know what was done on the rear...

I think the vette has better weight distribution than a camaro .

is the aerodinamics of the vette better than the camaro?

7:24 You can't build a C2 67 L-88. 17:28 How "stock" is the engine in the green Corvette? Does it have a cam? Ported heads? Increased compression? Seems to run pretty strong. I wished you good luck heading into the weekend and I kinda felt like I jinxed you when the Camaro broke. Great job pushing through and getting the win and the record.

The Corvette is looking ghter that's why and independent rear suspensoin

Do you not think you have a converter/trans issue seeing as how that motor wouldn't make power through your drivetrain but does with his drivetrain?

427 hot damn baby, fast as fcuk