Тёмный

99-04 Ford Mustang V6 3.8L Drive Line + T5 Transmission + Clutch Removal 

Tyler Creates
Подписаться 1,9 тыс.
Просмотров 20 тыс.
50% 1

Hey everyone, sorry for the video being a little all over the place I wanted to take this project on by myself, so I did. That is why it took a while and me not knowing the names of stuff. Now I know all of the names for all the things I took off and messed with.
Anyway hope you all enjoy the video!!!
#2000mustangtransmission #mustang #mustangtutorial
In Partnership with the eBay Affiliate Program I earn a small commission when you purchase products through the links below no extra charge to you. It helps me out a TON!
(Always Double check your vehicle Parts/Part # Before Purchasing)
(eBay Affiliate Links)
2000 3.8L Mustang Clutch Kit: ebay.us/Xvhtpg
2000 3.8L Mustang Transmission Mount: ebay.us/MECTsB
2000 3.8L Mustang Clutch Fork: ebay.us/V0r1Gf
2000 Mustang headlights: ebay.us/qvBhdW
Work Gloves: ebay.us/UAMryP
Short Throw Shifter: ebay.us/s5nPSp
- Music -
Say Good Night by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Video
---
• Contact the artist:
music@joakimkarud.com
www.joakimkarud.com/
/ joakimkarud
www.joakimkarud.com/use-my-music/
---
• F.A.Q:
How to use music
goo.gl/zNKFGu
---
• Main Playlists:
Artists: ru-vid.com/show-UCht8...
Genres: ru-vid.com/show-UCht8...
Moods: ru-vid.com/show-UCht8...
---
• Follow us:
Facebook
goo.gl/OnhrRO
Twitter
goo.gl/WJnMWV
Instagram
goo.gl/5EgBhP
SoundCloud
goo.gl/KfElaU
Google+
goo.gl/eDXHbT
---

Хобби

Опубликовано:

 

20 июн 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@alabamapsycho144
@alabamapsycho144 3 года назад
Im working on a 2000 mustang 5 speed and the throw out bearing is done so I need to put a new one in
@andrewgross5882
@andrewgross5882 2 года назад
That’s cover is for that mounts to the side of the transmission, covers up your clutch fork attached to your clutch Line.
@TylerCreates
@TylerCreates 2 года назад
Yeah this video was recorded a long time ago when I was new to car stuff haha. I figured that out when editing the video🤣
@SithRattus
@SithRattus 3 года назад
I’m actually getting a 99 mustang with a 5 speed manual. Transmission is shot. Won’t go into gear. Hopefully this vid helps.
@Scott83016
@Scott83016 4 года назад
Any tips on taking that top bolt of that starter out??
@justcasual3415
@justcasual3415 4 года назад
Use a extension it’s just 2 bolts comes off easily
@silverwolfalfa
@silverwolfalfa 3 года назад
Universal swivel with an extension. That's how i did it. I keep the swivel on the socket and the extension behind it. It gave me enough room to ratchet it out and tighten it back in. Good luck.
@Chrisbuildsstuff247
@Chrisbuildsstuff247 3 года назад
I need help I have a 2002 Ford Mustang convertible 3.6l v6 and it seems to run okay ish but when you take it out on the road it has almost no power at all it get worse as it warms up too any ideas I have cleaned the idle air controller replaced the TPS new spark wires plug and coilpack new oil oil filter new MAF I’m thinking maybe o2 sensors are sooted up and cats are clogged but what could cause that much soot a bad gasket
@Chrisbuildsstuff247
@Chrisbuildsstuff247 3 года назад
Could it be the crankshaft positioning sensor or maybe the EGR or vacuum leaks
@TylerCreates
@TylerCreates 3 года назад
I am thinking either 02 Sensors. Usually a clogged cat or cats will make the car bog hard or not run at all if they are real bad. You should be able to tell though by the amount of air out the exhaust or by an OBD2 reader. If it's sooted real bad I would inspect/replace upstream 02 sensors and reset the ECU before the next drive. Unplug the bat for 30 minutes. The ECU will have to relearn but it helps if you haven't done it before. Just make sure to do all sorts of driving so it can learn. I would check for vacuum leaks, PCV hoses. Inspect all your wires and 02 wires to make sure nothing is messed up unplugged or burnt. Do you have a check engine light or an OBD2 reader, also does the engine miss/shake at idle?
@Chrisbuildsstuff247
@Chrisbuildsstuff247 3 года назад
@@TylerCreates I do have a OBD2 reader but no codes are being thrown and also the readings from the 02 upstream and downstream seem totally normal. It’s shifting late and it even backfired up through the intake manifold so I’m thinking maybe timing? What do you think
@TylerCreates
@TylerCreates 3 года назад
Well if it backfired something is up with the timing. Maybe your chain is worn out or you sensor is not reading right. I would for sure test your timing chain slack.
@Chrisbuildsstuff247
@Chrisbuildsstuff247 3 года назад
@@TylerCreates woii you left the timing cause the hesitation in gear shifting?
@JosePerez-ki5zv
@JosePerez-ki5zv 3 года назад
Is this the tremec t5?
@TylerCreates
@TylerCreates 3 года назад
I do not believe it is a Tremac T5. Mine is just a stock Ford T5. Tremac T5 transmissions are usually built to some extent.
Далее
How To Replace The Clutch On a 99-04 Ford Mustang
13:01
[RU] Winline EPIC Standoff 2 Major | Playoffs
4:38:55
Просмотров 168 тыс.
❤️My First Subscriber #shorts #thankyou
00:26
Просмотров 6 млн
WATCH THIS BEFORE REPLACING YOUR TRANSMISSION!!
9:13
Просмотров 736 тыс.
2000 Mustang GT Clutch Carnage! Transmission Removal
27:13
Косички из морковки 🥕
0:40
Просмотров 9 млн
EQUIPAMENTOS TOP ? #moto  #motopeças
0:13
Просмотров 23 млн
тгк: katylazarevaa
0:16
Просмотров 2,4 млн