AD-1 Amp Dyno Ruthless Audio 8500.1 by Jones Subwoofer Solutions JSS 

Contact me via support@JonesSubwooferSolutions.com if you would like to own this amp!

Wow this Amplifier is a beast great dyno testing keep up the good work sir 👍 👍

All around great amp looks like a beast an can get the job done ✅

I'm amazed!! I want one. If I had that amp I could get another 18" Resilient Sounds Platinum subwoofers.

Great performance!

Love high voltage dyno's. I run 16v-15.95v. Love to see a dyno test on the Crossfire XT 8K. Getting ready to install all my Crossfire amplifiers in my Escalade. I know it'll be different in a vehicle. Just bums me out no one has done a dyno on the XT 8K. Move to Boise ill let you dyno mine lol. Everytime i say something, they're ship it to me and I'll dyno it. I ain't shipping any my stuff. I get nervous having gear shipped to me. I know your close. Next time ya in Boise bring your dyno lol. I have a 120AH Plannano bank.

Excellent!

I just got one of these amps. Coming in this week. Gonna be running it on 2 lvl 6 18s with 4 d3100s and a 400amp alt. 1.4ohm.... mayyybbbbeee 0.35

Just subbed! I love dyno videos!

I'm not familiar with Ruthless Audio, but that amp is a fucking beast and it looks hella clean inside too! Not as good looking outside as my Wolfram, but more power!

that intro is my ringtone and it freaked me out for a sec 😂

Wow!! Just got a jp33,thought that was strong

Great job i hav 4 of them

That's a great amp !

Very impressive

Should be called Insane Audio!!!!!!!!!!!! Just an insane amp and its strappable..............!!!!!!!!!! Nuts!

Point proven across the board, takes power to make power .outstanding performance if you have the battery reserve to handle such a beast, of an amp..

😮 that’s insane

I run a 320A DC Power if I ever get a few more alternators I’d like to get one of these. I charge 15.0-15.2, mid 14v under load, but I don’t draw near what this does

Nice amp

im really liking the no nonsense straight to the point videos. but i have a question. is there any way for you to test with more "real world" voltage? great videos but with over 15v its not very realistic numbers being produced if we put it in a car without boosting the stock voltage. just a thought. thanks for your content and time.

Beast

Hey JSS, other websites mention this amp is .5 ohm stable. Is that true? I wonder what the dynamic would run. Thanks for the vids!

WOW, I just looked at these on Gatly car audio website! This is weird.... Lol

Great Dyno run..loosely regulated..named properly

Great video and content. This amp acts and looks just like my favorite brand of all time and that's Orion hcca. Looks just like the Orion hcca 8000 v2 guts and performance is close

Bad ass

I’m charging at 15.2 and I have one of these at 1 ohm it drops down to 14.3 on big bass notes I need a different battery bank

Wow

That 15volts seems abit unrealistic for most of us....

Is This amp stable at 0.5ohm? If yes how about its output at 0.5ohm?

Need to do 10k next

Nice amp so what do these cost and is it a full bridge

Impressive amplifier performance! Wow at all the cry babies that are butthurt over testing the amps at 15+ volts. LTO batteries are affordable now. If you cannot maintain 14 volts you need to upgrade your electrical. Enjoyed the tests! Keep up the good work.

I would like to know if it has sound quality equal ? to sundown salt 8k. why recently i bought Down4Sound JP83 i don't like the sound quality

Cat5 is the large phone style plug just fyi

Really like to know what it does around 14.4 because most people aren't running a almost 16v system

Without watching 1000/4000/8000

Wondering wt will do in a car at 12.6sh volts.

Dyno ns2 at that voltage

.5 test?

can someone te;; me the differnce between this amp and surge audio 10k

I would rather see ratings at 12 volts up to 14.8 v

Thanks for the video. But the company calling it a 8500 watt amp does not make it one. Its a 10k amp Thanks my dude.

jp 83?

2400 Watts RMS at 4 Ohms (Rated at 14.4v) 4500 Watts RMS at 2 Ohms (Rated at 14.4v) 8500 Watts RMS at 1 Ohm (Rated at 14.4v) Tiffany RCA Inputs Operational Voltage Range: 8v - 16v 1/0 AWG Power and Ground Inputs Remote Bass Knob Included Input Sensitivity: 6v - 0.2v Frequency Response: 10HZ - 250Hz Phase: 0 - 180 THD @ 4ohm > 0.01 750 Amp Fuse Rating (250 Amp Fuse on each Positive Input) 1-Year Manufacturer's 0.5 Ohm Warranty Included We are an AUTHORIZED DEALER for Ruthless Audio Products.

But what's it do for the average guy. They aren't running 16v ...a lot of orgs won't even let you run 16+v

Do these test with normal 14.4v

Ain't that just the teampie amp?

Is this amp another teampie amp ???

should be running it at the highest 14.8 V but 14.6 V realistically

Run it at 12.4v. Like crossfire and Sundown do.

I understand this amp is built like a tank but why the shitty dollar store bass knob and non acrylic back plate?! That high quality of an amp I would expect a bass knob with temperature display and standard acrylic backplate without having to pay extra for it🤦🏻‍♂️

its loock same teampi 7500

2500w over rated ain't-no-slouch

People you need to understand that you will never get those numbers with speakers and music. Realistically watch the 2 ohm numbers, that's what you should see in your vehicle. Amp Dyno videos are misleading

Looks like the one amp? Actually they all do and it was made 6 years ago

I haven't seen the videos of this amp on stock voltage. And I get it they asked you to run it at high voltage. 🙄 But did you insist at the least running this amp on both high and stock voltage? I mean at the minimum 14.4 due to the website specifications. This test is near null and void. Not to mention the website stated .05 stable, but Ruthless asked not to run it lower than 1 ohm. IJS they want you to advertise for their sake, and the hell with your input in behalf of your subscribers. Well atleast that's what I'm getting out of the comments. Straight up, just say NO! We're faithful to your channel just so long as you don't feed us bullcrap.Their specs calls for stock so atleast run a test related to specifications and anything else should be bonus footage. Maybe for another video! One thing I did notice on the website was the 750 amp fuse rating 🤔. Maybe that's why they asked to perform burst on high voltage. We the subscribers of Facekicker would love to see this amp perform in more practical environment. All in all great video, but the content is a bit misleading to the ones that don't understand the talk.

Nice..bad amp..who makes dis amp??

Just another amp rebranded by someone else. Nothing special and is offered under other brand names. For once I’d like to see someone actually design and manufacture an amp instead of rebadging all the Chinese and Korean and Brazilian crap 🥺. Car audio these days in nothing but a bunch of middle man importers 🤷🏼‍♂️

Bro your the only one that conducts these tests at damn near 16 volts.. Honestly I know why u do it or why u think y have to but it's misleading anyway I wanna try n slice it. The majority of viewers see your results and hear uyour "crazy" comments not knowing your test arnt anywhere near real world what they would experience in their cars.. Dunno who ur exact intended target audience is but majority of us aint running 16 volts in our cars. Little 12.8's. Can u make your videos a little more relevant n lower your tests voltage. These results are artificial from being grossly inflated. Just a thought. that 15.9 volt start test is just too big a caveat to take tests seriously.. Mead dont do it like that big d deff don't do it like that.. Whatev or just tell me to kick rocks.. Aight well good talk.

Could u please do a Avatar 3500.1 Please . And Thank u !!!

How about starting at a more realistic voltage? Like maybe 15 volts? Because most vehicle charging systems charge at around 14.4 volts. Just stating the obvious. I mean of course it's doing higher numbers. Takes power to make power.

Looks like a teampie lol

Nice amp