Adam Audio A77H - Simply Amazing 

Before I start the video: I love my S2Vs but have been told Adams are dark…idk but I love them ❤

still using my original A7's. Bought them in 2006. Still doing the trick.

Just picked up a pair with a Dangerous D-Box. Sounds freaking amazing. Thanks for the inspiration

I have the A77H's in my studio also, got them last summer, and they are AWESOME. The clarity and detail is incredible, and the imaging is so precise I can tell where things are panned at 1 o''clock or 2 o'clock instantly. I agree ADAM has significantly improved the sound with this generation of monitors. To me these are futrue proof over others in this class with the ability to put the tuning of your room direclty onto the speakers via Sonarworks ID Reference. NO more need to run the SW plug-In system wide or in the DAW.

Yes yes I’m running a set of A77X and a set of A7X’s love it

I currently have the A7Xs and they are great for my needs at the moment but I would love to upgrade to the A77Hs one day. Seems like a no brainer. Thanks for sharing!! Much ❤ BJ!!

I'm getting prepared to upgrade my entry level kit-Thanks so very much for your videos! I have narrowed my monitor choice down to the a77h or the a8h which might be a bit large for here but I would like to work with them! Thanks again!

Thank you for such a thoughtful review, Barry!

I have noticed in frequency response graphs and subjective listening tests that there's a mid-frequency dip in almost all (if not all) Adam monitors. Adam A4V manual also acknowledges that, stating that this dip is caused by the port organ-pipe resonance and it's a trade-off between two conflicting characteristics. The quote from the manual: "A very narrow dip at 1 kHz is caused by the port organ-pipe resonance. This type of dip is commonly seen in many loudspeaker designs, including the previous AX Series. There are ways to remove it but, as with everything in loudspeaker design, it is a trade-off between conflicting performance features. The acoustical cost of removing the resonance is increased wind noise due to higher turbulence in the port. Listening tests have shown the port resonance to be inaudible in most listening environments as the resonance has such a short decay. This is illustrated in the waterfall plot further down." What are your thoughts on this, guys? In my experience, when I had A5Xs it was quite difficult for me to make mixes translate well to other speakers and/or listening environments. After switching to Yamaha HS7, which do not have that dip (in fact its mid frequencies are slightly pushed forward, so the exact opposite of Adam) this problem disappeared altogether.

The A77H's are the best speakers iv ever owned. Coming from the tried and true yamaha HS8's, I was completely blown away on the flat frequency response. If theres is a defect in your mix these monitors will point it out.

I have been sold on Adam's A series when I saw the late great Rupert Neve use A77X's to test his 5088 consoles. The only other monitors I use are a 30 year old pair of Yamaha NS10M studios (the horizontal models) that I purchased new back in the 80's.

Perfect timing as I am looking to upgrade my monitors. I currently use Sonarworks for room correction and headphone monitoring. I saw on Adam website that the A77H can integrate directly with Sonarworks. Would like to know if you have tried it and what are your thoughts on this. Thanks again for all your videos.

A77X owner here and completely second your points. If I were buying new today, the H's would be my goto choice but I'll be sticking with the X's at least for the time being. Hard to justify their replacement and associated expenditure.

I upgraded from Kali IN-5 to Adam A77h. I'm also very happy with my choice. 😊

I am so torn since these have been announced… Torn between these and the A8Hs. Seems like the eight goes a little bit lower than the dual sevens, but the sevens are a bit louder all they probably not noticeably louder and I’m sure the eight are plenty loud. Seems like 27 inch drivers should cost more than one 8 inch seeing how everything else is identical, so seems like the prices are reversed.

Barry, thanks for your thoughts. Could you compare them to iLoud Precision MTM?

Thanks for your review, very informative and straightforward. I'm about to buy a pair for my 2nd control Room at the studio. I'm a little worried about the low end and weather or not I will need to add a sub. As a long time user of Adams products what sub do you think would pair well with the A77H monitors ?

a77x’s tweeter dstroyed my ears after half hour in a studio…….such much distortion on them. went with hedds type 20’s for my home studio, zero ear fatigue with those tweeters

Just ordered a pair of A77Hs. You said “Cat 6” cable. I think you can use Cat 5e also yes? Hope so. That’s what I ordered. I think I read that in the manual on the ADAM site.

P.S. Do you couple the A77H's with an Adam subwoofer?

I'm still looking for a pair (preferably 3-way) as second monitors...Can't decide how much I want to spend and what to go for, Kali, Dynaudio, Neumann... And since I've been sharing so many of your opinions, I might need to consider those as well

Adam are great. we also like jbl pro monitors

I am using the Yamaha hs8 . What will be a better upgrade for a 3m x 3m room ? Will the Adam audio a77h be good ?

I wish I could afford them but I do have T7V's and I love those. They're perfect for the size of my room. It's not treated as well as I would like so I avoided the sub and I still have a great base response.

I'm watching every video about this new adam series....but no any comparation between a77h and a8h......i don't know which one grab....anyone tested the 2 m9nitors?

Would you pick the A77h over the Neumann KH 120ii?

I have used the A7X monitors since 2009. I have had mismatches for my surround speakers, but still got decent surround mixes. These mixes are all post, not surround music. I bought the A7V's and an A4V last summer and put the A7X's as the surrounds, and the A4V is the center. I mixed a 2 hour doc for Nat Geo on them. and two feature films and the results are great. I used the software to tune in a little flat spot at about 180hz due to the speaker placement on stands and some combing from my desk. As you said Barry, I love the sound, and I can sound design and mix for hours and I never find myself turning up the master volume to compensate for ear fatigue. Hopefully I get a solid 13 years of use from these as mains like I got from the A7X, until Adam does something remarkable again. BTW the LFE is the Sub 10 MkII.

Will the a8h be good in a 3m x 3m home studio ? I currently have the Yamaha hs8 .

The Adam A77H or ADAM S3H? Which should I get?

Are these suitable for smaller studios?

what is the minimum distance for listenning for this monitors.

❤👍

since i really do trust you l'll order a pair of these or maybe a A8H did not decide yet but i believe the A77h have a better stereo image , what you think Barry , thank you for the great videos i appriciate your efforts ALWAYS .

Any chance of getting the ATC boys to send you some monitors for demoing??

I feel that any EQ applied to make the speakers fit better in your room is actually a compromise to avoid proper room treatment and picking up the best room size that you can. At least for my T8Vs I found out that any EQ is actually hurting more than improving the quality. I very much preferred to deal with the room boosts and dips compared to whatever it is that the EQ was doing. Probably at this price point the technology got better, but I doubt it can compete with proper acoustic treatment. In that regard, would it be better to settle for something like the T series and invest the rest of the money in acoustic treatment?

Will the a8h or a77h be good in a 3m x 3m home studio ? I currently have the Yamaha hs8 .

I'm curious the reason you would choose the A77H compared to the A8H. 1x 8 inch woofer vs 2x7 inch woofers. I'm not sure what the difference would be.

what do you think of the A8H?

I had no chance to listen to these, but old Adam were for me too effervescent on treble. I don't like how they use AMT tweeter. Of course I can change idea if I test something good. Integration with Sonarworks is a great implementation. Very nice choice.

I ALMOST bought these... Instead I bought the Hedd Type 07 mk2 When they get here I’ll let you know how they sound.

This is only T.U.C. 😢

Barry go, check and get a trinnov, and you mid will blow