Add directional antennas to DJI integra goggles 

Absolutely awesome video I have the integra goggles, and almost immediately replaced the stock antenna with the G2 flip from fly fish RC I took the stock antenna apart and de soldered the antenna elements then removed the hinge pins and removed the entire upper part of the antenna. I then did the same with the G2 antennas. I opened the front housing, de soldered the leads from the mcx base and removed the hinge pins, then reassembled the flip G2 upper housing onto the stock base, replaced the hinge pins, re soldered the antenna leads to the G2 elements, replaced the housing covers and it worked perfectly. Using the stock O3 air unit antenna or the fly fish long range antenna for the O3 both of which are linear polarized. The stock Tx antenna gives me about a 10% improvement in range and maybe 5-7% better penetration, but the fly fish long range anti gives me 15% more range and at least 10% better penetration, and this improvement is omnidirectional just like the stock antenna. I have a low spot on my property that I used to drop to 9mbps when I flew through it at low level like 5ft off the ground. Now I only drop to 19mbps on the stock Tx antenna and 23mbps on the fly fish long range Tx antenna. Over all a huge improvement but I must caution you only use the linear polarized antenna at both ends. if you use the G2 Flip with a left or right hand circular polarized antenna you will actually decrease reception quality by a substantial amount. That same area that went to 9mbps drops to 2mbps and my video feed is unusable and I have to climb out fast to get to an altitude where signal is restored.

great man, I've been waiting for this content so long!

You made my day, many thanks to you

Awesome! I also wanted to make a similar video but gave up. All the parts I assumed would work didn’t lol. Thanks for figuring it out. Will follow your instructions and subbed! 👍🤩

Hey dude, I finally got around to making that upgrade. Thanks a bunch for all your help, seriously appreciate it. Oh, and btw, in my latest video where I'm testing out those antennas, I gave your video a shoutout. It totally deserves more views, man! Good luck up there bro!

good job Piotr !

Good job, man!

OMG ! When i was choosing between Integra and Goggles 2, i go with integra because of the integrated battery and for the price of course ! I was a bit upset because the antennas could not be changed ... until today, Thanks you for this work and sharing with us! PS : I was working on a yagi antenna prototype to boost the signal without dismantling the integra, but you just do it better :) Double PS : You should fly with an omnidirectional antenna and a patch. With this combo you have the advantage of a true RC patch in range and the advantage of the 360 degree reception of an omni Fly safe 🔥

Fantastic work! I actually went with the goggles 2 because of the removable antennas and changeable battery. No regrets so far, but this mod would have made that decision much harder if it had been out when I "upgraded" my goggles from the V2's. I still think the ability to swap batteries and run different packs makes the goggles 2 the better choice, but I am really impressed with your solution here. Subbed.

Nice job Bro.

Nice ! Thanks

Ho appena fatto l'aggiornamento ai miei INTERGRA però con le X2-AIR😈 è un'altra vita!! Grazie per il bel tutorial!!!

my question is, right and left antenna is the same signal 5.8Ghz ? if can use the same signal then 100% i will do this to get more range on my integra

How many degrees does this lens show?

tricky, but cool! thanks, man :)

Question: I plan on buying the mini 3 pro to use with the integra googles and controller. Should I buy the mini pro 3 with the display on the controller, or save a hundred dollars on the combo with a controller that has no display?

Can you comment on the performance you got going from the stock linear to these antennae? I've seen some people swap the antennas on the goggles 2 but didn't see much of a difference, maybe 5% +/-. Interested in your experience.

Could you share the link to these TrueRC X-air 5.8 anthenas with SMA connector?

Can we replace the strap of integra google ?

That’s nice

If we are using this antennae in goggles then what antennae have to use in the o3 air unit module ? Can any one help me on this

Zajebiscie nagrana gadka ;)

Great video! I have seen your files and will be getting someone to print for me. Do we just print 2 sets of all of them? Thanks!

Would it make sense to connect the TrueRC antennas to the internal antennas ufl connectors instead of removing the stock external antennas? This would result in 4 external antennas, 2 directionals (TrueRC), and 2 omnidirectional (stock). Or is there a reason not to use the internal antenna connectors?

Which antennas did you by from truerc? The dji google 2 one, right? They seem to work with the integra as well..

what module do I need to use integra with analog? is if even possible ?

Can you double check your thingiverse 3d print link in the description? It's not working for me. Thank you.

Hello. the link is no longer valid it is cut. Is it possible to have the correct link please?

great job. But why doesn't anyone make an adapter, to be used with antennas that are upgraded on the goggle2, just plugged in like the original DJI?

Only for this mod I would have purchased integra. I still miss my v2. In my opinion its the most versatile hd goggles. I brought goggles 2. Can you please tell me if I can do the same on g2 ? Or atleast little bit of heads up, because I want to use my truerc x ii m2 on my g2.

wow!!!

Nice project! So… the range was increased by how much?

Where do I order these? I only see the .slt file

16 srews right? that's feckin overkill hahaah....anyway, great video, detailed and informative. I have some questions though, which polarisation shall I choose when buying aerials? Or it don't matter? As you have more experience with mods this one will be easy to answer: could moding be done by only removing face plate drilling small holes for coax and attaching antennas that way? Without risking to dmage something inside googles? I am just curious ...

😮 It's interesting how the reviewers said that the Integra antennas cannot be removed.

Wow brother this is incredible, when did you manage to reach in km with this hacks? thank you so much

is it an IPEX1 or IPEX4 u.fl connector?

Cool! “Cenementineter”? I’m assuming this was done with an AI voice?

Simple enough

Can i mod analog on this integra Sir?

Nie mam gogli integra ale obejżałem z rozkoszą

“Great success” 😂 still always hear it in borat voice

where did you buy u.fl to rp-sma female 10cm u.fl to rp-sma female 15cm