Add Electric Power Steering To Any Vehicle for $150 | EPS Conversion

Подписаться 11 тыс.

Просмотров 264 тыс.

50% 1

Today I'm going to show you how you can add an electric power steering system to any car or vehicle. The advantage of using a Prius electric power steering system or other adaptive electric steering is simplicity. Unlike hydraulic power steering, an electric power steering conversion only requires 3 wires (power, ground and 12volt on) so no messy hydraulic lines to worry about. The Toyota electric steering systems are widely available on ebay and can usually be found for around $250. Alternatively you can use electric power steering from a Kia, Hyundai and even Nissan.
The EPS system I chose is from a 2014 Kia Soul. This DIY EPS conversion is perfect for muscle cars or any other system that lacks power steering. I knew I needed the EPS conversion on the dune buggy when I used a faster steering rate and now its like a new buggy.
+++ Years and models of adaptive electric steering to use!+++
www.therangers...
As always leave your questions below as I love helping others with this stuff!
00:00 Intro
Parts I Use In This Build!
▶ AEM CD-7 Carbon Digital Dash - www.aemelectro...
▶ Pulsar GTX2860r Turbo - www.pulsarturb...
▶ ARP Main Studs - arp-bolts.com/...
▶ Cylinder Support System - www.cylindersu...
▶ Instagram - / dirtgeartv
▶ Dont Click Me!! - www.youtube.co...
▶ DirtGear Merch -
teespring.com/...

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 220

@benjaminreinhardt259 11 месяцев назад

Not sure how I stumbled on to this channel, but it looks good. Nothing screams 'my kind of people' like MIG welding steering components in flip flops.

@NeoIsrafil 11 месяцев назад

Hehe yah, I do flux wire in pajama bottoms and sandals, seems the algorithm has grouped us all together.

@Freedom_is_better_than_safety 11 месяцев назад

Just as a point of information, these power steering units have a small rubber gear inside that’s well known to deteriorate and “thunk” when you power them up and turn the wheel. If this happens, simply unbolt the motor from the side and inspect that rubber gear. If it’s bad, replace it and it’s fixed. Dorman sells the gear for around $12.

@williamlanphar630 2 года назад

Just got back from the salvage yard . Got a unit out of a 2013 Soul for $ 100. Thanks for the heads-up about this unit !

@icarossavvides2641 Год назад

2:40 ish, Just a few points of enlightenment. The input and output shafts are NOT solidly connected, they are coupled via a resilient coupling (this is a failsafe connection whereby if the EPS fails there is still steering control albeit without assistance). This coupling allows slight angular displacement between the input and output shafts. without a differential load you will see and feel nothing. Once there is angular displacement between the input and output shafts, due to steering system load, the differential is measured electronically and is used to regulate the amount of assistance the EPS delivers, the greater the displacement the greater the assistance. Hope that helps.

@jimbobelectronics Год назад

Just a little insight.... You can solder a wire into the connector without dissasembling the unit. Just tin the pin and the wire, and then just solder away. you can simply fill the connector hole with silicone after to seal it up. SAVE YOURSELF HOURS! :)

@JasonSmith-utube 4 месяца назад

Yeah I don't know why he would do all that disassembly when you consider it from the outside.

@Couch_engineer Год назад

Outstanding job man. I’ve been looking for ideas for my lawn tractor and this is giving me some ideas. Btw, I see you practice safe welding in flip flops like I do. Cheers

@byronmill Год назад

Man, I can't believe the number of times you had the ground on the opposite side of a bearing or u-joint from where you were welding. All that current flowing through a bearing. Not good.

@lylejohnston4125 2 года назад

I'm just starting this same mod on my daughter's '63 Nova. I'm going to retain the column shift for the automatic by shortening the shifter mechanism and using a shift cable setup, (I think and hope). Failure is not an option but, just in case, I know where there's another column the same color. I got my steering gear, module, and plug from an '09 Corolla for about $100 at the local u-pull-it yard.

@Iowa599 11 месяцев назад

If you want to add power steering to your minibike you should stay in the basement.

@Jonathan-jo2xu 11 месяцев назад

That made me spit on my phone 😂 I read the comment right after he said it too and I'm like what the hell bahaha!!

@liquidlinda2708 2 года назад

Man, you are a mechanical GENIUS!!!

@oddshot60 11 месяцев назад

*ANY* Vehicle??? What about a 1968 M35a2 Deuce and a Half? I just turned 73 and have had rotator cuff surgeries on both shoulders. Power steering would mean I wouldn't have to get rid of my beloved old daily driver. This would be an answer to a prayer.

@account4info 8 месяцев назад

There are heavier duty electric motors for something that big.

@JSBIRD69 6 месяцев назад

@@account4info Where?

@account4info 6 месяцев назад

@@JSBIRD69 Bosch servotwin and Knorr-Bremse will have a product out soon.

@Self.reliant 2 года назад

Great job. My china rhino clone just lost its electronic power steering. And dang wouldn't you believe it's going to be -24 In Minnesota the next couple days and I need to plow. It's really not that bad unless you have the front diff lock engaged

@foyjamez 2 года назад

I have an old leaky GM van and thinking of going this way.

@davidoswald2155 2 года назад

Same here .

@Reaper00319Delta Год назад

Did you ever do it?

@foyjamez Год назад

@@Reaper00319Delta No, been working on the house and my garage.

@RalfdaLau 3 месяца назад

Water cooling the welds makes them brittle. It’s better to use compressed air. How a part that experiences high torque you want the welds to be as strong as possible.

@DirtGearTv 2 месяца назад

Totally agree! I was trying to keep heat off the bearing with cold prior to adding any heat. Hopefully not as brittle as water cooled 🤞

@kdautoks 11 месяцев назад

"The Ranger Station" guys have been doing it for years and have info on many eps setups with associated wiring diagrams. I did it on a John Deere B tractor!

@Cherokie89 5 месяцев назад

Somebody get this man a microphone

@seanhiggins704 11 месяцев назад

Do you happen to know if there are any of these EPAS systems that have 'return to center'. Thats something I know the prius doesn't have. Are there any of these that have better aftermarket operating systems so they aren't always in failsafe mode that anyone knows of? Awesome video, some really amazing content here, thank you so much.

@Iowa599 11 месяцев назад

For "return to center" just run more trail. (caster is usually the easiest thing to change)

@Tappar1 11 месяцев назад

With the Prius I believe you can put a potentiometer between some of the signal wires to adjust the strength so it isn’t just in failsafe, but the issue is usually it’s a variable signal from the ecu so it’s not simple to retrofit.

@Iowa599 11 месяцев назад

@@Tappar1 there is no "return to center" assistance by the power steering rack… The idea of one is dumb, really dumb… If there is no input through the steering shaft, there is no assistance. None. Everything that happens is mechanical & caused by the tires & suspension.

@seanhiggins704 11 месяцев назад

@@Tappar1 i thibk you're right I just found someone that makes a hos antenna that can bypass the ecu so it will create a variable input on the prius epas

@arturorodriguez9383 2 года назад

could it work on a jeep xj? i have a nissan electric steering column

@jamesweide838 2 года назад

I am using the same motor in a 1970 Mustang. My issue is the connection between the motor and steering wheel....where did you get that knuckle joint from???

@Laydownandlikit 2 года назад

I've seen alot guys fab there own but maximum motorsports sales them for mustangs!!:)

@terriecotham1567 11 месяцев назад

Quick tip on connectors, there's two parts of the connector even on PC boards and if theirs a number or name or both at times its possible to find the connector and the part number for the mate. At times it takes a little work. But in the age of computers lots of data is online and its amazing at times. So dont give up to ease as some OEM parts may have the same connector PN or run of parts and you have to pin them down, Take the VPX Pro or Sport circuit Breaker replace panels for new aircraft. the connector kit is a few dollars and the pre wire kit with pins is a few 100 dollars and not a bad buy for some home builders or avionics shops as they come with the wires prie crimp and all the builder has to do is match the wire sise to the circuit and put them into the connector. But I looked at the VPX and was able to track down the connectors and then the pins for each connector and in a range of pins for the wire size of the aircraft circuit. If you a home builder the computer can do amazing things when tracking down parts And places like Y Tube can offer amazing advice for your next Ideal no matter how simple or complex

@Tatertot_Tommy 10 месяцев назад

Just for future reference, you could also just connect the single wire to pin #1 in the exterior connector receiver, and then simply fill the remainder of the void in with RTV, or you could put a release agent on it and fill it in with some Bondo to make your own connector "pigtail".

@farmerbrown3768 11 месяцев назад

After paying extra for a mustang II “power rack&pinion” unit and putting up with a leaky power steeing pump Oh, I sure wish I knew about this 3 years ago!❤

@Witsenburg 2 года назад

Hi, do you notice any downsides to the power consumption / electrical system? If you steer standing still, do you see a voltage drop or can your alternator / battery cope? Thanks for all info shared.

@DirtGearTv 2 года назад

I’m curious to find out myself, I haven’t run it as i’m doing an engine build but can report back in about 3 weeks when I know how it responds.

@Tezla_Insanity 2 года назад

@@DirtGearTv any update?

@richardmcdaniel3108 2 года назад

I’m curious about this too. How much of a power suck is that thing.

@growingup4487 Год назад

@@richardmcdaniel3108 30+ amps plus

@BEANS-O-MATICtransmissions Год назад

@@DirtGearTv any more info on the power draw

@felixsnow9304 Год назад

thanks for the info! just put this in a 1946 power wagon after watching your video.

@blueH2crx Год назад

MIG welding in flip flops like a baus

@vikotto 2 года назад

Man, I sure would like to find a mechanic who can do these conversions with their eyes closed.

@Laydownandlikit 2 года назад

Def seems simple enuff but I'm guessing it's not I'd like to install it on my 87 FoxBody !!:)

@vikotto 2 года назад

@@Laydownandlikit wish I had your confidence.

@aceshadow3077 2 года назад

GREAT JOB A+ on the video Learned allot. I have a 1934 Plymouth car and I have purchased off eBay a Saturn view electric power steering I would like to put on this car. Looks very similar to the Kia you have. It came with the control module with a large red and black wire ( sure this is to battery) and the small plug with 3 small wire sticking out about an inch. I have no idea which of the small wires goes to hot for my switch. Would you have any information on this? Thanks

@bluestripes1 11 месяцев назад

this system has bad steering feel, i wasted time with it

@DirtGearTv 11 месяцев назад

As in poor feedback? how so

@JamieFudge-hv8dq 2 месяца назад

What is the requirements to hook up in 2013 Kia rio Electric steering Module I hooked up the key power on but I need the red and blue hooked up also they have a 2.4 vote With arms coming out of them what do I do

@JamieFudge-hv8dq 2 месяца назад

I put electric steering in my buggy the column is from a 2013 kia rio I hook up the keypower on But I have to hook up the other 2 wires in order for it to work and What do I use for those other 2 wires or can I buy a bypass Please I am very stuck here can't figure this out

@AdminCarbonetics 4 месяца назад

Hello, we have a e30 1983 model. We are in Australia - what do you recommend ? Thank you in advance!

@beverlyaustin924 2 месяца назад

How would you do this conversion for a 1986 Toyota 22R 5spd Pickup?

@kevinchaney8634 6 месяцев назад

do you have any feedback on which PS unit on your list that is most durable, most responsive, etc.?

@DanielinLaTuna Год назад

Nice. I was thinking about doing power steering for my 1963 VW Bug. But it’s pretty light, and it looks like a lot of work. Thanks for sharing, though

@travismathis6084 11 месяцев назад

Now I gotta go find 2 of them lol … one for the buggy I plan to start building this winter and another one for my golf cart! While i was watching your video I figured out how to mount it … In theory so I’ll go look in the morning and see if im thinking right….. I would really like to find smaller PS units , my room is going to be tight… I’ll dig around online and see if I can come up with a smaller unit that will work…. THANK YOU for the knowledge and inspiration! Keep building stuff so i can learn more!!!! 👍🏽👍🏽👍🏽

@bst857 3 месяца назад

Does the wheel still self-center after fitting this? I heard the one from the Prius doesn't. I'm guessing if this also doesn't, maybe it needs some kind of controller.

@James_WTFox Год назад

I also used a Kia soul eps unit in my racecar. Works amazing for about 10 minutes of cruising on freeway but it “times out” and goes back to being very limited assist. If I restart it, it works as it should for another 10 mins. Anyone having this issue?

@DirtGearTv Год назад

Interesting, what year was your unit? Afaik my unit is running always in "limited" assist, but that's all I need being so light 🤔

@TurboV8boi 11 месяцев назад

Did you ever get this figured out on your car? Seems like this would be a nice setup in a race car.

@cdoublejj 9 месяцев назад

find out who mfgs that connector and what they call it i suspect it could be had cheaper EDIT: i also admire good old fashioned soldering diy can do too!

@Silverado5.3 2 года назад

Great Fab Skills. Would like to see if I could do something like that on my 85 C10

@dave9271 Год назад

Hope you got it goin I want to do a 68 c10 so their similar got any info on what route you took?

@Silverado5.3 Год назад

@@dave9271 I never did it. Sold the truck.

@Good-Enuff-Garage 2 года назад

great video and here in California you can pull one of those yourself from Pick N Pull for $60 bucks

@ovalwingnut Год назад

That truly is a "magic box". And usually only say that on the 3rd date. Just saying. Thank you for the video!

@Ryan_Tidwell 11 месяцев назад

This guy is pretty smart for an idiot that uses a cutoff wheel with no guard and grinds and welds in shorts and flipflops.

@kt31086 6 дней назад

would this work on a 1992 Ford Econovan?

@claymore2k1T10 11 месяцев назад

FFS get your mike sorted, I had to stop watching after 2 minutes.

@KCDrives 11 месяцев назад

I wonder how much of a pain in the butt this would be putting in my AW11

@MrCarmelo1959 3 месяца назад

Wow this will be my third time seeing this video and I’m always impressed with it kudos I’m trying to make it happen for my Kawasaki mule thanks so much for sharing

@DirtGearTv 2 месяца назад

Best of luck!

@InternetDude 3 месяца назад

No followup? It looks like the steering might be too fast, maybe twitchy? Is it OK once done??

@DirtGearTv 3 месяца назад

It's perfect for my application! At first I thought this rack could be too fast, but with power it's perfect. Follow up is future videos showing how it performs and it's goooooddd 🙌

@308dad8 11 месяцев назад

Ever drive a G6? I’m not a fan of electric assisted steering.

@johnchristopherrobert1839 4 месяца назад

Congrats I think that’s the ugliest gasket job I have ever seen

@fregisz 7 месяцев назад

joints phases so bad, it gives so big pulsation then wheel is turning

@acdcluver5628 8 месяцев назад

So got one of these setups and soldered the wire to the #1 pin. Hooked everything up and the ECU clicks and then nothing. Am I missing something? What are the odds it's bad?

@DirtGearTv 8 месяцев назад

Did you verify it's the right year with the link in description? I missed by one year the first unit I tried and that's exactly what it did.

@hostflies7183 Год назад

Hi, do you think this one will work for an old f350?

@theflightdecklive Год назад

Do you know the spline sizes on each end of the Kia steering motor?

@ka24det 2 года назад

I have a kick scooter upgraded with a 2011 Kia Soul engine. Will this EPS conversion work for me?

@terryatpi 11 месяцев назад

Yes , but it’s pronounced ESP

@elliottlandco2776 11 месяцев назад

Very cool. My Kia box arrived today! How did you wire your power (the motor wire) wire? Keyed or nay, and what amperage did you plan for or find you needed? Thanks for the inspiration! Mine is going a ‘66 c10 restomod

@DirtGearTv 11 месяцев назад

Power side I believe i'm using a 60amp fuse/breaker. It's likely these don't actually draw that much since it's failsafe mode. I have it wired to my 12v acc when in 1st ignition position

@melvincoleman8008 Год назад

Question: As far as the ECU# B2563-99500, I'm seeing a lot of ECU's with that number, but the first 2 # are different. A2, C2, 2V, 3x,2k, etc. Does that make a difference? Does it have to start with B2 ?

@DirtGearTv Год назад

I had another unit I tried that didn't work that was slightly different, so I went back to the years and models of only those proven to work. The link for that info is in the description

@lasersbee 6 месяцев назад

A little late to the party but.... Great Info... Needed this for my John Deere Snow Blower Steering Upgrade. Thanks for the Pin Out Links. Just Subscribed.😉

@JamieFudge-hv8dq 17 дней назад

Did you read my comment and question

@FilterYT 11 месяцев назад

Cool project, thanks for sharing. Does that steering module spin endlessly or is there a stop to stop?

@chopshopchopper 10 месяцев назад

Great question. This unit could be used for other applications if it just spins with no stops...

@funkyd04 2 года назад

Can't find a quicker steering rack for my application so was going to use a rack quickener. I'm worried the 2x ratio on the steering shaft may do weird stuff with the torque sensor on the input shaft of the epas. Should I be worried?

@DirtGearTv 2 года назад

I don’t think you will have an issue as these are optical sensors (I believe)

@bosdad7 8 месяцев назад

where were you able to find the wiring diagram ? I using a power steering unit from a 13 Hyundai Santa Fe and can not find anything on the net to help with the wiring.

@DirtGearTv 8 месяцев назад

Check my link in description, only certain units will work

@jedclampett6466 Год назад

No......

@jedclampett6466 11 месяцев назад

Again!..... no

@searlearnold2867 4 месяца назад

How could you rig this up to the rear axle of a cargo trailer so you could steer the rear axle around corners on a remote control like some heavy haul trucks?

@DirtGearTv 4 месяца назад

Sure, I don't see why not 🤷‍♂️

@tyrannyterminator4179 Год назад

Where did he get welding shorts from?

@Mr.EeToMyself 8 месяцев назад

Love your style. That's the way.

@hmata3 2 года назад

Is it just really two power inputs and a ground? 🤯

@DirtGearTv 2 года назад

Power, ground and 12V signal 😁

@livinglife7856 6 месяцев назад

Does your ignition power cable go straight to power or through a relay?

@DirtGearTv 6 месяцев назад

I'm assuming you're asking about the power steering main power? Yes I do believe this one is on a relay

@JH-oh1in 11 месяцев назад

Local pull a part for connectors

@mbox314 11 месяцев назад

This video should be used as an example of how NOT to use a welder and angle grinder.

@johngray8580 11 месяцев назад

For sure! Shorts, flip flops, dodgy welds on a major safety system. I get hurt anytime I do stuff like that. Now, lets weld the brake lines to the wheel cylinders.

@TheBakRd 7 месяцев назад

If for some reason i lose power, will it still work unamplified?

@DirtGearTv 7 месяцев назад

Yes, it functions as a normal steering link only amplified

@jkingkingsbury9490 2 месяца назад

would this drain the battery if you wire it up this way

@DirtGearTv 2 месяца назад

It's wired to ignition so if I left ignition on, yes. If it's running it's drawing from alt not batt

@coachgeo Год назад

question for you. Do you think someone could add something like this as a "secondary"? Keep existing...... but ad this as secondary system? As in for like a flat towed. cars behind an RV? .... Make it steerable from tug's cab.... Would certainly make reverse maneuvers easier

@lennieadi Год назад

Great video. My dad has a 1995 British LEYLAND DAF drop side 3.5 tonne gross crew cab pick up. Can I use this to convert to a power steering as well. It’s not been running for years but a new battery and clean out of the diesel lines with new filters and it should start. He’s in Jamaica.

@knoffroad1 3 месяца назад

Excellent video, it would be good to make another video on how to solder in flip flops, without getting burned 👍👍

@hartle4 11 месяцев назад

You dont say a word about the power requirement for these electric PS units..... they require lots of amps of power

@amandagamble3859 11 месяцев назад

All you had to do is go to a junkyard and cut the wire harness with that 8pin clip from a kia of the same year and model for about $2.00

@Mikey-Likes-I.T 11 месяцев назад

hoping I can get this to work for my 1957 chevy truck! Would love to have power sterring in it! glad my feed showed me this channel.

@de3763 14 дней назад

What is fail safe?

@Hitman-ds1ei 11 месяцев назад

You come across as a pretty smart guy then I see you welding in short sleeves, short pants and open footwear then I don't know so much !! But enjoyed the content even if it included some cringe moments, but I guess a lesson learned the hard way is still a lesson learned !

@singleaspringle6941 2 года назад

Hey, I want to do a similar thing but with a Kia Picanto EPS. Do you know if every Kia part works like this (just needs 12V to function in fail-safe mode) or is it exclusive to Kia Soul models? Please if anyone can help me with this

@DirtGearTv 2 года назад

checkout the link I posted in description. There are only certain years that work in these “fail safe” mods

@singleaspringle6941 2 года назад

@@DirtGearTv thanks. I found a wiring diagram of the Kia Picanto EPS and it seems that if I buy a complete unit, every pin would have an adequate signal except for CAN bus, so I hope that it will work

@singleaspringle6941 2 года назад

I say "I hope" because it is not listed in the link. But I know that Renault Megane II EPS also has this fail-safe mode and is used in similar projects so maybe the Kia Picanto will also work *fingers crossed*

@paulus387 2 года назад

@@singleaspringle6941 i believe the connection between the two ecus go through the CAN bus, so it may not operate without that connection. so might want to double check before you pull the trigger on buying everything for it.

@gilhernandez605 11 месяцев назад

would you have any issue mounting that e-steering unit on something like a 95 Chevy 1500 truck?

@robertcarter8995 Год назад

What eps would you recommend for an 02 Land Rover range Rover HSE 4.6

@TeamNightscreamMoto 3 месяца назад

Jesus the echo!!!!!!!!!

@ElizabethGreene 11 месяцев назад

Hey, if you're near Tennessee I can probably help you 3D print a housing for one of those connectors and then you can snap in a Molex or Dupont pin to fit the actual terminal. The first one will probably take a few hours to make, after that you can print them off for pennies.

@garrettslobey9204 Год назад

2015+ mustang has an electric gear box that is very quick.

@mauricecanney7472 11 месяцев назад

Beats the old hydrovac systems we used to use. Steering shaft joints are available in both splined and set screw cheap and steering shaft braces with a bearing are cheap enough to be worth while.

@roberthand5777 11 месяцев назад

Can this be used to convert from liquid PS? Also can it handle oversized tires?

@ronnie2031 8 месяцев назад

Very nice!! Do you know if the renault EPS works in fail mode?

@marketstargetseocompany3740 Год назад

Says $150 but anyone with the same skillset charges 150 an hour with a minimum 4 hours to do this

@mustanglover1186 Год назад

So I'm interested in trying this set up on my 97 f150. What do I do about the hydraulic system in the gear box. Just jump the hoses with each other and eliminate pump?

@jakubforycki1573 11 месяцев назад

does it need steering angle??? looking random EPS and there are with steering angle sensor / 3 connectors on the control unit.

@emmanuelodhiambo9744 2 года назад

My Steering wheel suddenly started to become hard on Park and Neutral but turns normally on Driive and Reverse gear. When that happens, the PS light illuminates and goes off when i engage the Drive or Reverse gear. Any idea on what i should do to get it sorted? Its a 2006 Toyota Crown.