Adding T-Track Clamps // Wasteboard Upgrade to the Onefinity CNC // How To

Подписаться 106 тыс.

Просмотров 60 тыс.

50% 1

We finally got around to adding a T-Track and new wasteboard to the Onefinity CNC! Our X-Carve had a threaded insert wasteboard and we wanted to change it up and try out the t-track system and so far we're loving it! We just need a few more accessories... Here's a quick break down on how we added the T-Track and a fresh wasteboard with a super fancy grid pattern to our CNC! Make sure to let us know what you think down below, along with any future video suggestions!
CNC SVG Files:
twomoosedesign.com/collection...
Parts/Tools Used:
T-Tracks : 4 Pack amzn.to/3eqa7sr
2 Pack amzn.to/2zsTkGD
Self Centering Bit: amzn.to/2ZKfGxV
Countersink Bit: amzn.to/3gyZIN8
Clamps: amzn.to/2XPTksr
Auto Lock Clamp: amzn.to/3dgy31d
#6 Screws: amzn.to/2M1wgRM
#8 Screws: amzn.to/3eyv7NE
CA Glue: amzn.to/2X5V8y2
Blog post: plantsandprojects.com/adding-...
Instagram: / twomoosedesign
Main Website: twomoosedesign.com
DIY Blog Website: plantsandprojects.com
Recommend Videos:
Myers Woodshop Threaded Wasteboard Video: • How To Make A CNC Thre...
Crafted Workshop T-Track Video: • Adding T-Track Clamps ...
Current affiliate promo codes:
Isotunes promo code 10% off TWOMOOSE10
isotunes.com
BAD Workwear promo code 10% off TWOMOOSE10
www.badnorthamerica.com
#T-Track #Onefinity #CNC

Хобби

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 167

@kenmiller2869 3 года назад

I love your honesty. My journey has also been a "learn as I go" in a lot of ways. My grandfather taught me a lot of the old ways but then I got a career. Trying to remember the lessons of old and incorporate the new as well. I look forward to the journey and I thank you for sharing with us. As i get better ill start sharing myself. Ken

@TwoMooseDesign 3 года назад

Ken Miller that’s the best way to learn! Make a bunch of mistakes and learn from them 😁 good luck in your journey enjoy the process and learn all you can!

@DesignCraftWorkshop 4 года назад

Great tutorial guys! This was on of the upgrades I loved about my old Shapeoko.

@TwoMooseDesign 4 года назад

Design Craft Workshop Thanks! Any accessories you recommend?

@BruceAUlrich 4 года назад

Looks like a nice and simple way to get a very functional wasteboard. Thanks for sharing!

@TwoMooseDesign 4 года назад

Bruce A. Ulrich heck yeah Worse case scenario I buy a new piece of mdf if I don’t like it lol

@jay07059 4 года назад

Great video guys - thanks for sharing! I appreciate that you left in the mistake on the t-track - it's a good heads up and nice to see even the pro's aren't always perfect :)

@TwoMooseDesign 4 года назад

Definitely not perfect! You should of seen my mistake the other day when one of my clamps slipped 😂

@bryanbrunner9548 3 года назад

I'm ordering one tomorrow for building guitars primarily but will use it for other things as well. This will be my first CNC so I'm pretty excited about it. I was looking at the Longmill CNC but saw the Onefinity in your videos and there is definitely a difference in quality.

@TwoMooseDesign 3 года назад

Nice! I really want to make a guitar you’ll love the machine 🙌🏼

@protect.your.digits.creations 3 года назад

Thank you , I learned so much . You guys are the best.

@TwoMooseDesign 3 года назад

Thanks! You're the best!

@derekdodson5623 2 года назад

I’m enjoying your channel. This looks like a solid CNC machine. Thanks

@TwoMooseDesign 2 года назад

Thanks for watching 😁

@rrgibson 2 года назад

Awesome! This is an upgrade I really need to do.

@johnchan6191 3 года назад

Wow, gr8 vdo on making a hold down & a grid 4 the cnc. Thx 4 sharing on Utube.

@TwoMooseDesign 3 года назад

Thanks!

@fredscott413 3 года назад

came back for another look, waiting for my machine to come,thanks.

@TwoMooseDesign 3 года назад

😆😆 I’ll try and make more onefinity content soon!

@chrystald. 4 года назад

Nicely done!

@TwoMooseDesign 4 года назад

Chrystal Dunlow thank you! 😁

@gregoryshelton4024 2 года назад

Thank you for getting back to me I'm liking everything I see about this machine you're you're shows or whatever you call them I don't know what they're called I'm not a checky with the stuff have been very helpful and I thank you

@CommonwealthCreations 4 года назад

Awesome. I just snagged 6 Incra t track pieces for my next cnc. That’s right, my next cnc. 😉

@TwoMooseDesign 4 года назад

Commonwealth Creations whhhhaaaaattt 😯 what one did you go with??

@aznracer816 3 года назад

just bought mines, getting it in jan 2021, excited

@TwoMooseDesign 3 года назад

Heck yeah your gonna love it! Lots of time to think of ideas lol

@Grimm_Book 3 года назад

You finally get it?

@acesnoopy 2 года назад

Great video, about to set my onefinity up this weekend

@TwoMooseDesign 2 года назад

Ohhh exciting!!! ThAnks 😁

@robertstrickland1979 3 года назад

great video, looking forward to my oneinfinity

@TwoMooseDesign 3 года назад

Robert Strickland thanks! And me too! I should get a production model soon and I’ll make some more videos 🙌🏼

@CoffeyCustomBuilds 4 года назад

Solid video! I enjoyed the walkthrough. Makes me look forward to a CNC even more.

@TwoMooseDesign 4 года назад

Coffey Custom Builds thanks man! Start saving those pennies you definitely need one

@CoffeyCustomBuilds 4 года назад

Two Moose Design Yeah I think I'll end up taking out a loan for it. Or throw it in a zero interest card. They pay for themselves so fast.

@TwoMooseDesign 4 года назад

Coffey Custom Builds absolutely our x carve paid for itself in 6 months and we knew nothing

@jav9888 3 года назад

Great VID !! lots of great hints, question what bit do you use for out side cuts ? lets say cutting circles , sqaures ...

@TwoMooseDesign 3 года назад

I like 1/8 or 1/4” down cut bits. Up cuts and compression bits are also great options. Thanks for watching!

@zombieno1 4 года назад

I plan on having a variety of waste boards for mine. Quick swap feature. Thinking at least 3 types. T tracks Threaded Vacuum clamp Maybe a modular one as well.

@TwoMooseDesign 4 года назад

zombieno1 That’s a really good idea! With the way it’s set up shouldn’t be too difficult

@ramblerssafarnaama4181 3 года назад

Hi, superb video. How are you controlling the cnc with the gamepad? Any schematics would be helpful. Thanks

@TwoMooseDesign 3 года назад

It’s something onefinity offers. I have seen a few others do it wish other CNCs but I don’t know the details sorry

@exelenc94 3 года назад

I'm excited to switch to 1f in the future from a longmill.

@TwoMooseDesign 3 года назад

you'll love it!

@DanielDunlap 4 года назад

Great video, guys! I didn’t realize you had two different CNCs. Which one do you prefer?

@TwoMooseDesign 4 года назад

Daniel Dunlap Woodworks both are great but the onefinity takes the cake. The x carve has been good to use for 3 years now!

@markbennison3399 2 года назад

Thanks for sharing your videos. I'm waiting on a Journeyman and was wondering if you were starting from scratch (as I am), would you still build your own waste board or would you consider the QCW? Thanks.

@TwoMooseDesign 2 года назад

The qcw looks pretty nice! I haven’t played with one yet but if it’s in the budget I’d probably get it, one less thing to worry about 🤷🏼‍♂️

@TR-et3py 3 года назад

New to channel. My Onefinity is coming in early August. I was going to prep for it as much as I can by starting to build the table. Do you have a table build video? Or can you tell me the size of the top? And overall height.

@TwoMooseDesign 3 года назад

Hey! 48” wide and 60” long would be more than enough. The controller is about 8” and the machine is about 45”x45”

@Bart_Depestele 3 года назад

do you think you could do inlay with different wood for the stars or is it a bit too small?

@TwoMooseDesign 3 года назад

If you did a v carve inlay your might be a able too 🤷🏼‍♂️ I don’t do very many so I’m not exactly sure how small you can go

@ArganicWoodwork 4 года назад

That Jeff guy is HAWT! But fo real solid work guys

@TwoMooseDesign 3 года назад

lmao 🤣

@jda407 3 года назад

what t-track clamps have you ended up using, if any? I just built mine the same way and I'm now realizing that the Rockler t-track inline clamps will not work because the track is lower than the spoil board. Just wondering if you are using any or just sticking with the glue/tape method? seems that the t-tracks could be irrelevant if you are and the spoil board could be one big board with the grid. Also, do you have a file for the grid that you can share? save some vcarve design time. ;-) thanks. can't wait to dive into things with my 1F

@richarnaud7794 3 года назад

I noticed you never milled the top surface of the wasteboard?? or did you? before you put the grid lines in? I got my machine recently and followed your wasteboard t/track setup..thanks alot..you guys are great!

@TwoMooseDesign 3 года назад

You definitely can surface the work area. I didn’t because I didn’t have a bit at that time. And Id you only cut small stuff like trays you’ll never notice. Large stuff over 20x20 definitely surface the wasteboard

@realtech4322 4 года назад

good job dear...

@clarkstevens2711 3 года назад

One trick I did when I wanted my grid to stand out I cut the grid and then I spray-painted the top and then when I surfaced the top I had perfectly Red Lions with my logo in the board

@TwoMooseDesign 3 года назад

Oh nice! Good idea

@antonioguzman7660 2 года назад

hi I'm learning a lot with your videos thank you! I'm about to buy my first cnc, I'm not sure which one its better shapeoko 4xxl or onefinity woodworker x50 any recommendation? I really appreciate thank you!

@TwoMooseDesign 2 года назад

Hey! I haven’t had the opportunity to use a shapeoko but I really like our onefinity I’ve had it for over a year. I would check out the onefinity user facebook page, I’m sure someone there has used both.

@antonioguzman7660 2 года назад

@@TwoMooseDesign ok, thank you I will check on face book.

@miketeresitaalvarado321 3 года назад

Good video, I was wondering if you used Easel to make your grid lines, I noticed that your spoil board is 32"X32" does Easel make carves that size without tiling? do you use the Pro or free version. Thank you Mike

@TwoMooseDesign 3 года назад

Hey! We did. You can adjust the size as large as you want I believe and we use pro version

@DormantIdeasNIQ 3 года назад

@@TwoMooseDesign what is Easel? does it come with the Onefinity machine? How does that fit in the big picture?

@williamdugger5572 4 года назад

I am a little concerned about the Y-axis running on rails that aren't supported. Have you had a chance to check for flex? Also, I am little surprised they don't have stop and zero switches. Maybe these will make it into the production machines. I think this is a fine looking machine but at this point is a huge gamble. Loved the box BTW.

@TwoMooseDesign 4 года назад

William Dugger There is no flex at all. Myers Woodshop posted a video standing on his on facebook and Instagram. There are soft limits in the software no switches needed 👌🏼👌🏼 thank you! I appreciate you checking out the video!

@athanasiospersopoulos1499 3 года назад

Waiting for mine unfortunately not before end of December Question how big is your table top ?

@TwoMooseDesign 3 года назад

Umm 52x52 I believe. 48”x48” mdf with a 2x4 frame but I cut a rabbet in the 2x4s to hold the piece

@venko3211 4 года назад

Please give 3d STL file links.i am interested to make this cnc

@misterjj779 3 года назад

Great video. Thanks. I've been programming and machining steel for about 30 years now and just ordered my onefinity. Looking forward to doing some fun stuff with it. Any recommendations on programming software that won't limit programming options? I'm hoping they eventually develop a 5 axis machine.

@TwoMooseDesign 3 года назад

If you have the budget vectric software is great!

@misterjj779 3 года назад

@@TwoMooseDesign Awesome. Thank you. I'll look into it

@TwoMooseDesign 3 года назад

@@misterjj779 you’re welcome!

@misterjj779 2 года назад

@@TwoMooseDesign Well the day has arrived. Machine came today with the X50 upgrade. Came back here to get a refresher on your waste board set up. I'm going to start on it tomorrow and then work on my enclosure. Have you ever decided to add bench dogs to your waste board along with using cam style clamps?

@TwoMooseDesign 2 года назад

@@misterjj779 I’ve tried both they work great! I’ll be posting a similar video Saturday with the journeyman 🙌🏼 I’ll have to come up with a video on a bunch of ways to mount stuff

@sarahknight2586 3 года назад

I love the videos yall do, I'm thinking about ordering a Shapeoko XXL today. The onefinity says you have to preorder how long does it take to get one? Also what do you think about the Shapeoko XXL or do I need to wait for the onefinity. Thanks

@TwoMooseDesign 3 года назад

sarah knight hey Sarah! Thanks for checking our our videos we appreciate it! I think the shapeoko is a great machine a lot of people seem to be pretty happy with them, I’ve personally never used one. We had an x carve for 2 years and I much prefer the onefinity over that. I think onefinity opens up orders again sometime this month and then you’ll probably have to wait a few months to get it. Soooooo is probably let that decide which way to go 🤷🏼‍♂️ if you don’t have a problem waiting I think the onefinity is a great machine 👌🏼

@sarahknight2586 3 года назад

Thank you, I was wondering does the onefinity make the flags that the Shapeoko xxl makes? Thanks, keep those videos coming.

@TwoMooseDesign 3 года назад

sarah knight I’m not exactly sure what your referring too I’m assuming the flags most people make with pretty much the engraved stars with like a police or fireman logo in the middle?

@donwires5793 4 года назад

Finally a SOLID cnc machine! Any plans for dust control?

@TwoMooseDesign 4 года назад

yep! I should have a dust boot any day now. Then ill add a video of our set up.

@michaeldennis7857 2 года назад

I got my woodworker yesterday and it want go all the way to the right.

@TwoMooseDesign 2 года назад

you probly have to adjust your offsets, i would reach out to onefintiy or comment in the facebook onefinty user group. should be a simple fix, they have a forum right up on it.

@mroberts41107 3 года назад

Great video, im purchasing my first cnc and definitely going with the 1F. Question do you use the probe? It's $90 dollars and if I don't need to purchase I would rather save where I can. Thanks

@TwoMooseDesign 3 года назад

I personally do not use a probe. If you dont have experience i recommend one. I used one when i started out definitely helps but not needed. Watch my How to make a catch all tray video i talk about how i set the zero without one, somewhere in the middle i believe.

@mroberts41107 3 года назад

@@TwoMooseDesign thank you for the super fast response, just purchased with my new 1F... Now to wait 3 months for delivery 😥 Love watching your videos inspired me to want to move forward with wood working. Thank you

@TwoMooseDesign 3 года назад

@@mroberts41107 thanks! I appreciate you following along. You’ll love it! The wait is brutal lol

@toddm9957 3 года назад

Flag is cool!

@TwoMooseDesign 3 года назад

Thanks!

@toddm9957 3 года назад

I haven't figured out how to send you pictures of some of my cnc work through your email

@richarnaud7794 3 года назад

How often do you use tape? I'm wondering if I'll even use clamps if I do the glue thing??

@TwoMooseDesign 3 года назад

Depends on the project but I use tape most of the time

@1734gator 3 года назад

In the world of industrial CNC manufacturing that is called a subplate. In that application it would be a big piece of aluminum that you can drill and tap holes in for mounting vises and fixtures without ever leaving any marks on the table.

@TwoMooseDesign 3 года назад

Gus Cox oh nice! Thanks for the info I didn’t know that 👊🏼

@mysticvalleywoodworks2777 3 года назад

What size is the table for your Onefinity? My OF came in Christmas eve. I need to build a table for it.

@TwoMooseDesign 3 года назад

My table is 50x50 but I depends on where you want to put the controller 🤷🏼‍♂️

@mysticvalleywoodworks2777 3 года назад

I want the controler next to the machine

@TwoMooseDesign 3 года назад

@@mysticvalleywoodworks2777 machine is 44” controller is 8” wide

@gregoryshelton4024 2 года назад

Can you etch designs on soft metal such as aluminum

@TwoMooseDesign 2 года назад

yes! you can mill and etch aluminum.

@fredscott413 3 года назад

thanks.

@TwoMooseDesign 3 года назад

You're welcome

@jpm_nt_i9308 3 года назад

Would Corel Draw be a viable option for use with a Onefinity?

@TwoMooseDesign 3 года назад

sorry im not familiar with that software so im not sure. It does work with most cnc softwares

@ricknutz7139 4 года назад

What size did you make your work area?

@TwoMooseDesign 4 года назад

The bench is 52" x 52"

@stonebayrocker 4 года назад

Nice! 👌🏻 How does double sided tape work compared to tape+CA+tape?

@TwoMooseDesign 4 года назад

stonebay productions honestly haven’t tried the double sided tape this hasn’t let me down yet 🤷🏼‍♂️🤷🏼‍♂️

@stonebayrocker 4 года назад

@@TwoMooseDesign ok! 👍🏻 Do you think double sided would be easier? A couple of operations less!? Great content BTW! 👍🏻

@TwoMooseDesign 4 года назад

stonebay productions yeah absolutely if it holds well enough it it would for sure be a little easier

@stonebayrocker 4 года назад

@@TwoMooseDesign sure thing! 👍🏻 I have ordered an onefinity! Following along you testing and also getting to know you're company! 👍🏻 It would be nice with an video about what router bits you're using and what speeds/feeds your running them at! 👍🏻

@TwoMooseDesign 4 года назад

stonebay productions absolutely I definitely plan on making one like that 😁 you love having a Cnc they can do soo much!

@shaynetcrocker 3 года назад

Will this CNC be able to tile?

@TwoMooseDesign 3 года назад

I believe any Cnc can tile it’s all in the software

@venko3211 4 года назад

What driver's and electronic

@rspandetjr 3 года назад

My only concern about adding t trac is cutting into them and breaking bits. Is that not an issue?

@TwoMooseDesign 3 года назад

The tracks are typically aluminum which is a soft metal and you would blow through them with ease. I would be more concerned on why you are cutting though the waste board over a 1/4 lol

@ericjohnson6456 3 года назад

When doing the CA Glue and tape thing, why not just put the tape on the project, add glue, add the other piece of tape, then turn over and stick to the waste board? Then you don't have to try and line up the tape pieces with the blank in the way?

@TwoMooseDesign 3 года назад

That would work too 🤷🏼‍♂️ I’ve never had an issue 😁👍🏼

@allenpoling6854 3 года назад

@@TwoMooseDesign HI. Great learning videos. Onefinity is on order but getting educated. So, do you use the magic super glue for all projects or just the small things? T-tracks for the larger items or just options to use?

@TwoMooseDesign 3 года назад

@@allenpoling6854 mostly for small stuff, ill use clamps on larger stuff. but its plenty strong for sheet goods

@resorter66 3 года назад

Do you have a file for this flag tray . that you can share or for sale. I would like to make some for christmas gifts

@TwoMooseDesign 3 года назад

Hey! Send me and email. Twomoosedesign@gmail.com I’ll see if I still have the file

@resorter66 3 года назад

@@TwoMooseDesign cusoak@gmail.com

@Z-add 3 года назад

I would have done a dry run. Placed everything on the table to see if everything worked. I would have also used the cut mdf as spacers to mark the t tracks.

@downhiller21158 3 года назад

Can you post the link to the grid pattern possibly?

@TwoMooseDesign 3 года назад

Once I sell our x carve I need to make a new one. I don’t have the file so one I make a new one I’ll figure out how to post it

@seckora 2 года назад

What software do you use? You're the second person I've seen using a game controller.....I'd love to be doing that!

@TwoMooseDesign 2 года назад

its a onefinity thing. it isnt apart of any software. i believe you can do it with other machines some how but I don't know

@seckora 2 года назад

@@TwoMooseDesign I have a postly 3d printed CNC that Im working on, so I'll definitely look more into it. Thanks! Keep up the awesome content!

@martyn1678 3 года назад

you could have screwed both outer tracks down the pushed all your remaining t tracks up against one side, measure the remaining gap and divided by 4. that would have given you equal mdf bed widths with little fuss or effort

@TwoMooseDesign 3 года назад

Thanks for the tip 👊🏼

@martyn1678 3 года назад

@@TwoMooseDesign lol no probs, love the machine by way, pitty i live in uk

@jaggycreations4712 3 года назад

WhAt software are you using?

@TwoMooseDesign 3 года назад

i run easel and vectric

@chrismoog294 3 года назад

What all did you buy with this Cnc on the original purchase?

@TwoMooseDesign 3 года назад

Chris Moog for attachments?

@TwoMooseDesign 3 года назад

Chris Moog or accessories I guess I should say

@chrismoog294 3 года назад

Yes accessories

@TwoMooseDesign 3 года назад

Chris Moog with any machine id highly recommended a dust boot and probe they are the top two must haves in my opinion

@user-ip6ct8gd3v 4 года назад

❤❤

@omegachar4754 3 года назад

That same piece of MDF is $46 today lol. Covid prices can't go away fast enough.

@TwoMooseDesign 3 года назад

Right! It’s insane and I agree 😔

@joeking433 11 месяцев назад

I don't get it. Why wouldn't you just put the waste board strips and the t tracks down at the tame time? Wouldn't you have a lot less measuring?

@EastLondonKiwi 4 года назад

Hi nice machine and I look forward to seeing how you get on with it. Re squaring up stock, have you thought of Bench-dogs, or pins? have a look at this guy Peter Parffit who has done a load of research into the subject and made a tool to install them on normal work spaces (which I don't think you'll need for this approach to work on your cnc), ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SAKhSPBozms.html importantly for you, he goes into the maths and why their placement works. If you purchased some procession ground drill rod, you could cut that down to make some pins. then have you CNC bore exact holes in your spoil board at key points that enable you to quickly square stock at known points by inserting the pins at stock placement time. You might even have them so your stock hits exact Y and X placements, negating the need to zero the X and Y, then once the stock is held down, remove the pins for cutting? If you saved this dog placement and sizing in your grind cutting and spoil board surfacing Gcode, you'd have a repeated-able pin placement every time you changed your boards. Hope that helps. take care D

@BattleBorn13 2 года назад

Great video. But that flag has way too many stripes, sir... 😂

@DormantIdeasNIQ 3 года назад

I may be missing something here... but consider this: First, the channel waste board approach seems much better than this screw-on type. Way too many screws to deal with, and more planning to line up the stock each time. The channel type, is much quicker, less cumbersome. Surely there may be pros and cons for either... chyme in, we all need to learn. Second, it also looks to be bad planning. ...and I am not picking on anyone nor you specifically. ALL the people who mean to show others how to do a waste board are omitting clues. First the CNC is installed on a table/flat surface, then the waste board becomes an after the fact proposition. The Z depth is then partially eaten by the add-on waste board. Should not the waste board top rather line up with the maximum depth of the Z axis? Therefore now, you must add thickness(strips) under the feet of the machine to raise it to par? ...again, chyme in...

@seleldjdfmn221 4 года назад

Here before 800 Subscribers. Don't give up. Let's build each other Up :d

@michaeldennis7857 2 года назад

Got fixed had the x where the z supposed to be .whoops

@TwoMooseDesign 2 года назад

Glad you got it fixed!

@matthewwright57 2 года назад

$23 for a sheet of MDF?!? Ah the old times.

@TwoMooseDesign 2 года назад

😆😆 right it really sucks now

@mtz3843 3 года назад

wish i could afford a oneinfinity but to costly.

@TwoMooseDesign 3 года назад

Pretty much every large hobbyists Cnc cost $2000-$3000 🤷🏼‍♂️ the shapeoko is in the same range as these two

@mtz3843 3 года назад

@@TwoMooseDesign i can get a millright for 1,200

@TwoMooseDesign 3 года назад

Okay doesn’t matter what machine you use as long as it does what you need it too

@richarnaud7794 3 года назад

I dont understand why you pre-drill the c'sinks on the t-track..i ordered the same ones and they come pre-drilled with nice c'sinks..the self-centering bits don't really do anything..just dont understand why you use self-centering bits on holes with c'sinks??

@TwoMooseDesign 3 года назад

You don’t have to. I pre drill all my holes it’s a habit with working with wood everyday 🤷🏼‍♂️

@guilhermegodinho9082 Год назад

Is Teds woodworking legit?

@TwoMooseDesign Год назад

I don’t know what that is

@hafzamacie8858 3 года назад

Try to do it with Stodoys plans :)

@flatlander523 2 года назад

STOP WITH THE "WHAT IS UP"!

@TwoMooseDesign 2 года назад

@flatlander523 2 года назад

Well, I guess what I mean is just talk to me as if I was standing in the room with you. A lot of content providers do the same intro and only a few make it sound personable. Your message is great. And yes, you probably guessed it, I'm an old guy,