Тёмный

Adjustable Windshield for the Can-am Spyder F3 / F3S 

Slingmods
Подписаться 33 тыс.
Просмотров 26 тыс.
50% 1

This product is available at SlingMods.com here: www.slingmods.com/can-am-spyd...
The MadStad patented mounting system allows Spyder riders to adjust the height and angle of their Spyder F3 / F3S windshield resulting in a much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide. The base plate assembly attaches to the Spyder's metal framework, just ahead of the instrument cluster. The adjustable brackets attach to that base, then the shield attaches to those brackets. With the shield separated from the bike you can adjust it to your optimal height, angle and airflow. The system allows you to set the adjustable shield to your desired position while simultaneously allowing airflow under the shield to prevent buffeting for comfortable wind protection.

Авто/Мото

Опубликовано:

 

21 окт 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 32   
@Slingmods
@Slingmods Год назад
🛒Can-Am Spyder Windshields are available here: www.slingmods.com/canam-spyder-windshields
@jterra8143
@jterra8143 5 месяцев назад
Awesome! Thanks! A lot better than the instructions. 😊
@housefull5297
@housefull5297 5 лет назад
I think convenience is really good product
@ChandranVenkitachalam
@ChandranVenkitachalam 13 дней назад
Hello, will this work for a 2024 F3S? Great instructions!
@ranreed9160
@ranreed9160 4 года назад
At 6ft the chart recommends 18inch But would 20 inch be a reach or too big ? I prefer to have it cover more wind buffering and when not in use just put it to its lowest and on an angle. So my question is at that height will it be too much at 20inches ? I’d hate to have to send it back
@Slingmods
@Slingmods 4 года назад
Hello Ran, remember you have a few inches of vertical adjustment with each shield. So you could also get the 18" and ride with it up 2" inches to get the height of the 20". That would also allow air flow under the shield on hot days.
@ranreed9160
@ranreed9160 4 года назад
Slingmods.com Thank you , you guys Rock 🤟🏾
@vjcummings5119
@vjcummings5119 5 лет назад
With the adjustment point being in the middle of the windshield how does it affect the field of vision?
@Slingmods
@Slingmods 5 лет назад
Hello Vejon, great question! These shields are designed to look over.. rather than through. The best way to measure what shield height is right for you is to have the top of the Shield at chin level when its in the lowest adjustable position. We took measurements from the handlebars to the top of the shield for the 18"-24" shields and posted those pictures here www.slingmods.com/can-am-spyder-f3-f3s-adjustable-clear-tinted-windshields-madstad-engineering for reference. This will allow you to measure from home to find the shield that works best for your height. If you order based on this measurement style the adjustment bracket will not affect your visibility as your line of sight will be far above the adjustment bracket. Thanks for the inquiry, please let us know if you need further assistance!
@leroybarnes4510
@leroybarnes4510 3 года назад
I think it would distract you very much. It’s a nice design but the center brackets work get in the way of your view. That’s just me.
@kevinsandells9933
@kevinsandells9933 3 года назад
Does that windshield have a lot of fludder on the sides while riding. Thanks
@Slingmods
@Slingmods 3 года назад
Hello Kevin, it's adjustable on both pitch and height so the level of noticeable vibration would be different with its set position and the amount of head or cross wind while riding. I personally have never really noticed fluttering on the shield itself while riding.. not more then one would expect at least. This is by far our most popular selling F3/F3S shield. Thx for watching.
@wanerhristov5445
@wanerhristov5445 5 лет назад
acabei de comprar o meu parabrisa para minha f3s.
@markusthedrummer8143
@markusthedrummer8143 Год назад
Looking thru the "goalpost" brackets would drive me nuts. I'll take the F4 custom over this any day. Thank you for mentioning how tall you are, very helpful!
@Slingmods
@Slingmods Год назад
No problem Markus. Our F4 shields are also great shields and extremely scratch resistant. Thx for watching.
@Kamoi69
@Kamoi69 4 года назад
I am 6'0 ft, should I purchase the 18' or 20' windshied for F3-S Thanks!
@Slingmods
@Slingmods 4 года назад
Hello, the 18" is recommended for your height. Please also note that you will be able to adjust the shield vertically a few inches and adjust pitch to fine tune it for you.
@BobCates
@BobCates 3 года назад
I am 6 foot 3, but I share my bike with my wife who is 5 foot 6. Which would be the best windshield for us to share?
@Slingmods
@Slingmods 3 года назад
Hello Bob, the 20" is recommended for those over 6' 2" and the 16" is the smallest shield which would work for your wife. The taller 20" would protect both you and her based on your height differences. You could also run the 18" as the shield does have a few inches of vertical adjustment. So your wife could ride with the 18" in the lowest position, whereas you could lift the 18" shield up to a 20" shield height when you ride.
@DRex45
@DRex45 2 года назад
So I made a comment months back inquiring about the effectiveness of this windshield and seeking the correct size for my height because I was trying to avoid constant turbulence on my helmet. Well, after receiving the recommended windshield size, and going for a ride I realized that the Not only am I get a lot of turbulence in my helmet area, but the turbulence is being generated from the space below the windshield which means the correct height is irrelevant because like I said. The turbulence is being generated from below. Guess I'm stuck with a uncomfortable form of protection 🤦🏾‍♂️
@Slingmods
@Slingmods 2 года назад
Hello D Rex, the height recommendations we provide to customers when asked are given to us by the MFG. Windshield height is totally subjective. Some people love to look over, some like to look through, some like clear, tinted, etc. With that said, please submit a support ticket with the link I provided below and we'll see what we can do to remedy the situation for you. Thank you! www.slingmods.com/index.php?route=information/contact
@JohnBraman413
@JohnBraman413 5 лет назад
so i guess using this windshield you won't be able to use the speaker pod system?
@Slingmods
@Slingmods 5 лет назад
Hey John, yes these MadStad adjustable shields are indeed compatible with the the SSV Stereo System. You can see a few pics installed with both items on our product page here: www.slingmods.com/canam-spyder-f3-f3s-bluetooth-stereo-system-ssv-works
@bobvallins5226
@bobvallins5226 4 года назад
Cost of adjustable windshield and shipment to Spain
@Slingmods
@Slingmods 4 года назад
Hello Bob, if you could please submit a support ticket with your full shipping address I'd be happy to provide a shipping quote for you. www.slingmods.com/index.php?route=information/contact Thank you!
@cassandrahouse3159
@cassandrahouse3159 4 года назад
Were can I buy
@Slingmods
@Slingmods 4 года назад
Hello Cassandra, this item is available here: www.slingmods.com/can-am-spyder-f3-f3s-adjustable-clear-tinted-windshields-madstad-engineering Thank you!
@d.knight6008
@d.knight6008 5 лет назад
I like the windshield, but you guys need to put much better instructions together than this. Screws not labeled and manual needs a lot of work. Video makes it look too easy compared to the buyer. Otherwise, cool windshield though.
@Slingmods
@Slingmods 5 лет назад
Hey Knight, we actually make the videos at our expense because the mfg instructions are usually not existent or poorly written. I'll pass your feedback on to the MFG. Thank you!
@denniswesley7455
@denniswesley7455 5 лет назад
It was easy to put on but the screws could have been package separately Mine was just one bag The video was great
@masterT2019
@masterT2019 Год назад
I bought the tallest windshield,I'm 6'3", I'm very disappointed in this windshield , after following the poor installation instructions. After ny first test drive on my new Can Am F3S, the windshield moves around a lot and is not stable at all. I was constantly thinking this unstable windshield could come off at any time.After 300 miles, the problems still persists. I would not recommend this windshield.
@Slingmods
@Slingmods Год назад
Hello Terry, that should not be the case. We have thousands of MadStad shields on the market. Did you follow the MFG written installation instructions or our video? Please let us know if there is anything we can do to help. You can submit a support ticket here if you need assistance with your purchase and we're happy to assist in resolution: www.slingmods.com/index.php?route=information/contact
Далее
Дарю Самокат Скейтеру !
00:42
Просмотров 1,5 млн
Good dad 🥰 #demariki
00:17
Просмотров 4,6 млн
Top 10 Regrets Before Buying Can Am Spyder
8:46
Просмотров 54 тыс.
Let's Compare the Can-am Spyder RT vs F3
21:41
Просмотров 55 тыс.
Can Am Spyder F3 REVIEW from a 3 Spyder Owner
11:57
Просмотров 339 тыс.
1000 MILES ON THE SPYDER..DO I LIKE IT?
11:23
Просмотров 58 тыс.
Cleaning Your Windshield, Do's and Don'ts
8:40
Просмотров 4,6 тыс.
Must Watch if Buying Spyder F3 Can AM
20:44
Просмотров 103 тыс.
впихнул турбину в глушитель
1:00
Опять в кузовной
0:40
Просмотров 1,4 млн