Advanced Bed Leveling First Layer - Calibrating your 3D printer Part 3 - Ender 3 V2

Подписаться 3,2 тыс.

Просмотров 9 тыс.

50% 1

This video is part of a series of 10 videos that go through how to properly calibrate your 3D Printer, the videos include:
Calibrating Your 3D Printer Overview
Part 1: Frame Check
Part 2: PID Autotune
Part 3: First Layer (Advanced Bed-leveling)
Part 4: Baseline Calibration Cube Print
Part 5: E-Steps Calibration
Part 6: Slicer Flow Calibration
Part 7: Retraction Calibration
Part 8: Temperature Tuning
Part 9: Acceleration Tuning
Here is the link to Teaching Tech's Overview:
• 3D printer calibration...
Huge credit to Teaching Tech for making the following website which is one of the best guides I have seen to calibrating your 3D printer step by step. This video is part of a series of videos going through each step of that process. Here is the link to the website:
teachingtechyt.github.io/cali...
Check out the playlist below to watch the other videos in this series:
Calibrating your 3D printer
• Calibrating your 3D pr...
Music by Byron Craft
Freestyle Instrumentals
• Freestyle Instrumentals

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@johng5617 2 года назад

Great video and awesome choice of background music. I happen to know a popular rap song which uses that same beat, "Menace" by Sheff G for anyone interested in modern New York rap. Liked and subbed!

@rainmaker3d 2 года назад

Thanks! I appreciate it!

@enriquedeniri1992 2 года назад

Hi, my prints always starts in a diferent z high. As I start printing I need to live adjust de z offset. Can you help me?

@Rhinomods 2 года назад

thanks for taking the time and pointers! I need to say your voice is way too quiet compared to your music and intros.

@motorhead45102 3 года назад

So the thing I have noticed with my ender 3 v2 is the bed plate is not totally flat. As in the center of the plate is lower than the 4 corners, not by much but enough that I can tell it is looser there than at the corners when Im feeling the drag. What could I do to fix that and would something like the BL touch help compensate for that?

@rainmaker3d 3 года назад

A bltouch would be the real fix as it would compensate for your unlevel bed. In the meantime you could try to flip your plate and print on the glass and then just get it level in the very middle and you would be a little high on the edges but if your prints are centered and smaller you should be okay.

@motorhead45102 3 года назад

@@rainmaker3d Mostly where I have it now with the small prints it seems to be doing good. Though the first print had adhesion issues because I had too much of a gap. Also I just watched all your videos in this series and I'm going to have to fine tune the printer on a weekend. Also did You mention in one of the video's about setting up a BL touch? One last thing, so much to ask about 3d printing but I'm learning but this is my first 3d printer

@rainmaker3d 3 года назад

@@motorhead45102 I am glad you liked the videos! I am planning on getting a bltouch soon and will make a video of how to install it. No worries on the questions everyone has to start somewhere. If you have anymore just ask.

@grudgeon 3 года назад

I just got my Ender 3 V2 and I'm having the exact same issue. Other than this, the printer functions great! My first 20mm calibration cube was spot on (

@rainmaker3d 3 года назад

@@grudgeon I am about to get a bl touch for mine as the build plate is not totally flat. The main thing is just trying to get the middle spot on as that is where most your prints are going to be.