Air Bag Light Flashing, How to diagnose and fix

Подписаться 10 млн

Просмотров 2,6 млн

50% 1

Airbag light on or airbag light flashing? This video will show you how to diagnose and fix a flashing airbag light. The flashing means that there is a fault with the system. You can read the number of flashes and it will give you a code (codes listed below for ford ranger and Mazda B3000). If your code is not listed, just google the year, make and model of your car along with "airbag light code" (ex. 2001 Mazda B3000 airbag light code).
In this case it was code 4-6 which is the drivers side seat-belt pretensioner circuit which is cause by the wire/clip under the seat coming loose or getting moisture in it. Just separate the clip and spray some wd40 or electric cleaner in there and reconnect.
Ford Ranger, Ford Explorer, Mazda B3000 Airbag codes (2000-2005)
15- drivers side air bag circuit shorted
16- passenger side air bag circuit shorted
19- restraint control module (RCM) memory full
24- restraint control module (RCM) internal fault
25- passenger air bag deactivation (PAD) switch fault
27- passenger air bag deactivation (PAD) warning lamp inoperative
29- Incorrect Vehicle Identification Code
32- driver air bag circuit resistance high
33- passenger air bag circuit resistance high
34- driver air bag circuit resistance low
35- passenger air bag circuit resistance low
43- front impact sensor
46- drivers side seat-belt pretensioner
47- passenger side seat-belt pretensioner
Radio Shack Light Part #: 272-334
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ru-vid.com_c...
-RU-vid Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Авто/Мото

Опубликовано:

20 янв 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,3 тыс.

@sluggerbaloney9737 Год назад

The best car purchasing choice I ever made was buying a truck that is the same make, model, and year of truck as ChrisFix. My son let me know the airbag light was blinking, this video is the first hit on Google, turned out to be code 46, popped the connector out,wouldn't you know the pins had corrosion, a little WD-40 and a metal nail file cleaned them up, plug it back in, the light is off. Simple 2 minute fix. Thanks so much!!

@onebrokenwriter 6 лет назад

Oh my goodness, I can't thank you enough for this! I did it! I fixed it! The code was 4-7, passenger side. Found the connector easily, pulled it out, WD40'd it (took a minute to also lube the hinges on the kitchen door to the garage), reconnected it and started the truck--and it's fixed! Thank you, thank you. My go-to auto repair shop had told me on the phone, "Ohhh, we don't fix those. You'll have to go to the dealer." No, no, no. All fixed now. Smiley face! (Demographic: I am a female, retired, over age 60.)

@chrisfix 6 лет назад

Awesome!!! I am glad the video was helpful and nice work Kay!

@dabcorn 4 года назад

wd40 is not good as a regular "lubricant" - it is a 'water-displacement' and rust penetrating solvent. Use another petroleum distilate, silicone or other synthetic lube for lubricating purposes.

@boostedreefer1041 4 года назад

ChrisFix l a lot y

@jeremypinder4436 4 года назад

@@dabcorn can i use pb i like that since wd40 isn't a good choice

@dabcorn 4 года назад

@@jeremypinder4436 : I don't know what "pb" is? Pitch-blend? Peanut butter? Lead? "PB Crisps"? sorry... :)

@imasoccerholic 7 лет назад

Just fixed a code 47 thanks to your video and a whopping 5 mins or so of easy labor. Thank you! Saved me probably over a hundred bucks to get it fixed at a car shop. Great video. Bless you.

@markmiddione6423 5 лет назад

Chris, Thanks very much. Yesterday, I called Ford for an appointment for the air-bag fault that has been going on for a number of years. So I watched your video and then went out to the 2000 Ranger and read the code as 27, replace the light bulb. That's an easy fix and saved me the hassle of appointment, waiting, probably $200 and time wasted. This was awesome. Thanks again. Mark

@brionphy3212 9 лет назад

Fantastic!! I have a 2002 Ford Ranger Edge and the airbag light started flashing about six months ago but quit after a few days. Yesterday it started flashing again and you would not believe some of the prices I was given as a guesstimate. I did what you said and the code was 47, which you also said was the passenger seat connector. I unplugged it and sprayed it and the light went off and stayed off. I can't thank you enough for sharing your knowledge with everyone. You have a dedicated follower from this point forward. Thank You, Thank You, Thank You!!!

@rubenugartejr.5020 6 лет назад

I have the same ranger and habe three dame code. I sprayed it but the light is still on. Did your connector have 2 pin or 4 pins. Mine only had 2 pins. But my driver side had 4 pins. Are my pins broken?

@oinkadams 5 лет назад

Thank you sir. Had a 46...

@spartanjim 5 лет назад

Hi mate I have a problem with one window back right hand side on ford ranger 2012 can't seem to find the relay location or what tips can you give me cheers.

@IBSsupernewsglobal 5 лет назад

Brion Phy then you tell everyone what to do if you smart

@chrisfix 10 лет назад

+Jocelyn Marquina, I cannot reply to your comment for some reason so I hope you see this. Your airbag light blew out so it beeps to let you know. So change the dash light and you will fix the problem.

@StevenCastro 10 лет назад

Hi I'm getting code 19 on my 2000 Mazda b3000. My airbags deployed after a minor bumper to bumper. I have not done anything to them except just tear the airbags out. Without going to the dealer or mechanic how do I reset the airbag light ? What is code 19?

@chrisfix 10 лет назад

Because your airbags deployed the computer in the car called the Restrain Control Module memory is full. You need to get a new one. It is located right above the cup holders and under the radio where the passenger airbag switch is located. Always buy new when messing with the airbag system and dont go to a junkyard.

@bettyakurangi8786 10 лет назад

thanks all fix

@fidelulloa4726 7 лет назад

ChrisFix what

@DanielElevators 6 лет назад

ChrisFix My airbag is fine on my ford Fusion

@monetsilerio7856 5 лет назад

After years of living with the pesky flashing airbag light, i tried your recommended fix...it worked! Thanks Chris!

@gayboi4283 3 года назад

Sjnne

@onthewrist5006 7 лет назад

Thank you!! It's been driving me crazy for 9 months. One minute fix!!!

@kevinhiggins957 7 лет назад

Thanks Chris. I had code 47 on my 2002 Ranger. Opened the connection under the passenger seat, sprayed in some contact cleaner and the airbag light cleared. You give some great tips and have helped me out several times. Great site.

@fourdayhomestead2839 7 лет назад

Kevin Higgins : same problem with my '02 Ranger. Glad to hear this helped, Ill attempt to fix in morning.

@hoseaallen9068 7 лет назад

Kevin Higgins thank you so much for this tip. I too have a 2001 ranger and 47 was the code that I was receiving. All I did was disconnect the passenger seat and blew the dust out of the connection with my mouth and it worked. Lol

@josesarabia4754 3 года назад

Did you take your battery off?

@raymondfelixolivas6475 7 лет назад

Hey Chris. Thank you much! !!! I has been trying to fix this for 2 years. I took it to 2 car parts stores and they were unable to read code so without your help I would have stayed stuck! You made it very easy.

@Mike604 8 лет назад

Swapped WRX seats on my Subaru Impreza and had airbag lights. Read 15+ forums and no one had a clear solution. Did this and it works. Thanks so much!

@chrisfix 8 лет назад

Awesome!!! Make sure you update your forum post with the solution so others can also fix their car!

@jman9816 5 лет назад

I stopped today and confirmed that a flashing airbag light cannot be scanned through the OBD port at Advance Auto to determine the issue. Came home and found this video had a 47 code on my 2000 Ford Taurus-probably the same V6 engine as this Mazda truck. I tried using WD40 as recommended in the video and it worked like a charm! Thank you.

@ybxmdjy 8 лет назад

Thank you! Had code 47 on 2001 Escape. Reseated plugs and code is cleared. You da man!

@chrisfix 9 лет назад

+Tran Ly for some reason I cannot reply to your question so I hope you see this. The connector might be corroded or coming loose for the side curtan airbags (just like the connector under my seats).The connector is behind the C pillar interior trim (rearmost roof pillar, next to rear window) on a 4 door car. The connector should be behind the side bolster of the rear seat on a 2 door car. 2 wire connector, and SRS wiring has yellow everywhere.Be careful when working with the airbag system and make sure you remove the negative terminal of the battery and wait at least 10min. My guess is that if you unplug and reconnect the wire harness connector you can fix the problem.

@Slash94995 9 лет назад

Got it. So removing the negative terminal of the battery is before or after I've unplugged the connector?

@chrisfix 9 лет назад

before you do anything, remove the negative terminal and let it sit for 10min then you should be safe.

@chrisfix 9 лет назад

***** There is no resetting an airbag light. You need to fix the problem. Try what I did in this video for both the drivers and passengers side seats.

@chrisfix 9 лет назад

***** You will need to get the computer scanned because there is no code that I know of. Check the connectors under the seats because it is a common problem.

@muncie101fy 9 лет назад

Ok cheers

@jennalillywho 6 лет назад

It worked 👍 My Ranger got the 46 code. Your steps were clear and easy to follow. Thanks!

@kylenewton6616 4 года назад

You're a life saver I swear I have a 2001 ford ranger myself and everytime something goes wrong I Google it and you're the one to save me lol

@TheNeso54321 9 лет назад

Working on Renault Twingo, Thank you Chris :)

@milo_andrs 4 года назад

Thanks man, my Mom's car got this and I tried the code thingy. You are Fu*****ng awesome!!!

@jasonmurrell3022 6 лет назад

You are an absolute legend buddy. Code number 46 was my problem but all fixed now because I gave the connection a little spray with wd 40 . Auto electrician wanted to charge me $1200 to fix the problem. Thanks heaps Jason from Australia 🇦🇺

@renragged 2 года назад

Thanks Chris! As soon as you mentioned something under the seat I knew you fixed my issue. I had just put my battery charger under my seat the day before I started getting these issues.

@Tamisman 9 лет назад

Thanks Chris ... works like a BOSS !!!

@mattpolitzer2920 7 лет назад

Thanks Chris for the diagnostics for Ford/Mazda Airbag lights. I'll be the domestic hero when I fix it on my wife's 2004 Ford Escape later today. You speak clearly and succinctly in your videos. Keep them coming.

@chrisfix 7 лет назад

+Matt Politzer thanks and good luck!!

@leetaylor6566 7 лет назад

I'm amazed! I know nothing about cars/trucks. I have a 2001 Ford Ranger and the airbag light was flashing and I didn't have the manual. I watched the video and followed the procedure with the WD-40. And instantly the airbag light stopped flashing. I'm so proud of myself for fixing it without asking someone else for help. Thanks, Lee T.

@chrisfix 7 лет назад

Awesome!

@aznguy2890 5 лет назад

I have a 2000 ford taurus. And my airbag light has been on for over a year. And this helped me 100%!! Thank you bro so much. It's been giving me a headache and no one could tell me why. And this took a weight off my shoulders!

@seshoutdoors9566 8 лет назад

Solved my problem instantly! Saved me worrying and possibly a trip to the mechanic. Thanks!

@paulwilliams8763 7 лет назад

Beautiful. That was fabulous. I learnt so much. Thanks so much.

@mrbonsi100 3 года назад

Your literally the only car mechanic channel I watch when my cars having problems! Had a 46 problem and your tactic worked! Keep up the good work!

@jamesr5852 2 года назад

I have the same issue with 46. Do I just turn off the car and then take the cord out and spray it and put it back and then start it again? Or do I need to do something else?

@mrbonsi100 2 года назад

@@jamesr5852 first turn off the car, disconnect the negative battery terminal, unplug the cord and spray the inside lightly couple of times, and plug it back and connect the battery and start the car.

@williamwarren4930 4 года назад

This video was awesome. Light went off right away after cleaning connection. Thanks for posting this.

@Alizevlogs 3 года назад

OMG thank you Chris fix I just fixed my 2015 Dodge Journey Crossroad with the same method except I didn't have WD-40 I just used a little bit of natural hair oil 😂

@randombymakarov7628 6 лет назад

Finally I got something from you Chris

@toddcott9510 5 лет назад

Had this happen on two different cars of mine, both times it was the seat wire, as you show. Brilliant video very well done. Thank.

@brendandeuby 5 лет назад

Awesome! Thank you! I had code 47 on a 2003 Ford ranger . Unplugged it and plugged it back in and no more light!!

@pvh_facp4001yt 4 года назад

Chris: talks about Radio Shack everybody: He exists now only in my memory

@indiam19 4 года назад

Radio Shack will be missed...😭😢😭😢

@Gmoney1019 4 года назад

@@indiam19 : Good memories, I worked there for 5 years !

@indiam19 4 года назад

@@Gmoney1019 Noice

@Kmonkeygoddess 28 дней назад

I didn't even catch that. 😢

@dropoutandretireearly1781 9 лет назад

Thanks Chris !!!!! YOUR THE BEST !!!!! I TRIED IT AND IT WORKED !!!!!

@vayasalsa 8 лет назад

Dude, your quick, thorough explanation was awesome. I have a 1999 Toyota Tacoma and will go check my code. Thanks for the info!

@car24dude 3 года назад

This video has saved me a lot of money. Thank you much.

@davidhunt4891 2 года назад

Great video. It’s always good to avoid overpaying for something that is a simple fix. Hard to believe what dealers charge for cabin filter changes, as an example

@xdeadwrongxdeadwrong7181 9 месяцев назад

No joke a shop wanted 400 dollars to fix mine 😮 those gat dam Clowns

@coffee7398 4 года назад

Thank you Chris, I just did this on my Mazda 6 & it worked like magic.

@chrisfix 4 года назад

Awesome! Glad the video was helpful!

@dgph59 7 лет назад

Thank you ChrisFix. Worked like a charm. All of 5 minutes.

@briananderson6566 4 года назад

Thanks a million chris you help me solve a problem that i was dealing with from the day i bought my car and it’s probably about 10 to 12 or even more years i had it. Sending Thanks to you bud all the way from Barbados. 👍🏾

@RedEyedAlain 8 лет назад

Wow this was super helpful thank you....instant subscribe :)

@richardpallo9009 9 лет назад

Hey Chris, Thanks for another great video. I had this exact problem and your video was the cure. It was such an easy fix I could not believe it. You saved me $$$ and more importantly time (losing my car for a day at the repair shop). Besides, I'm sure the repair shop would have done exactly the same thing, or actually worse; replaced the whole wiring harness or the belt pre-tensioner sensor and charged me $250 in parts (+labor). I'm sure there are many easy fixes like this that most people can do themselves at home (with a can of WD40). Thank you again Richard

@chrisfix 9 лет назад

Richard Pallo No problem Richard! That is the goal with my channel so I am glad you saved money and learned something new!

@jamesnewman3855 6 лет назад

Great tip. Thanks for codes. Worked perfect for my 2003 Ranger passenger side seat.

@paulsmi55 8 лет назад

Excellent video...I quickly traced my problem (code 47) and sorted it out. The ACC switch on-off x10 trick also seems to be effective. 2002 Mazda B2300. Many thanks !

@samsen201 7 лет назад

Good and informative video as always. Thx.

@260bill260 8 лет назад

this was exactly my problem and your solution fixed it. thanks much. good job

@chrisfix 8 лет назад

+260bill260 Awesome! Glad to hear it!

@wrenchesinmotion3282 25 дней назад

I was very skeptical, but this worked on my Tribute. Gotta love free fixes. Thanks very much.

@lnteI 7 лет назад

mazda 6 2008 code 22 i checked cables under drivers seat and error is gone, thanks for help!! Chris i always follow your videos. I repainted my spare wheel after watching your tutorial. Next month i am repainting my alloys. You are doing great job!! t

@ggalbavy 4 года назад

great video! had a code 4-6 in a 2002 ford escape. pulled the connector apart sprayed wd-40 on the connections. clipped back together. NO MORE AIR BAG LIGHT! just like ya said! worked perfect. thank you very much!

@chrisfix 4 года назад

Awesome! I'm glad it worked well for you!

@vandrews22 9 месяцев назад

Watching this video on October 3rd 2023 and Chris mentioned Radio Shack and this video was made 9 yrs prior and Radio Shack is non existent now. Let me go hug my grandma ❤

@dunnm02 8 лет назад

ChrisFix, thanks a lot for this video. I recently inherited my wife's 2003 Ford Escape. The airbag light started flashing then staying lit. I did exactly what you did on the video. The code 46 showed and your solution worked perfectly! I'm really grateful b/c it could have cost me plenty for a quick fix with some WD40. Keep up the good work!

@chrisfix 8 лет назад

+dunnm02 Awesome! That is what I like to hear!

@thereisabattleforyoursoulj3787 5 лет назад

Finally somebody clear. Thank you so much. Thank you!!!!!! You did help me.

@heavenlyhost3 8 лет назад

Well Chris we tried out exactly what the video showed us - my husband sprayed the WD 40 into the connection and he also checked the connections and the wiring harness all look to be correct, however the service air bag light is still activated on our dashboard. any suggestions? Thanks Dolores & Dave 2004 Chevy Avalanche

@cognac510 5 лет назад

ChrisFix has left the chat

@randombymakarov7628 6 лет назад

How you learn all that you awesome

@deannatreece1635 4 года назад

I just used your video to fix my Ranger. THANK YOU

@OFFBEATMAMA 8 лет назад

Thank you so much for this. I brought my escape to ford. They said it was the brain of the system that needed to be replaced for $1300!!! Well I didn't have that so we let it slide until registration time... After finding your video I found it was the passenger not the driver so I went out to inspect and low and behold a ton of stuff under the seat. I just had to remove the crap under it and the light went out! You saved me $1300!!!

@chrisfix 8 лет назад

+Krystie W No problem! Glad the video was helpful!

@JasonTylerRicci 9 лет назад

2003 Ford Ranger XLT. Trying to replace dome light bulbs to LED resulted in a spark at at the connections. Now the dome light is inoperable.Then, noticed the air bag illumination lamp on. Related? Hooked up to same relay? I know there's a relay box under the driver side dash. Never a problem with the air bag light until the dome light issue. Code is "2-9"

@chrisfix 9 лет назад

Jason Ricci The spark is because the light had power to it when you were trying to connect the bulb. It is probably a fuse that blew. Code 29 is the Incorrect Vehicle Identification Code error. It is strange that happened. YOu might want to check the fuses and maybe pull the negative terminal on the battery for 10min (as you change the bulb would be a good time). Double check it is code 2-9.

@basilbautista9194 6 лет назад

hi, how did you fix the problem? im in the same situation

@iftinchanneliftinchannel682 8 лет назад

christ thank you yout help iam.new machanic pleas bring more youtub thank you

@sabagamer3052 5 лет назад

Ok 2 years ago , how is your progress?

@Timmyc4t 6 лет назад

Chris is da man!!! And usually RIGHT ON !

@palanisamyrathinasamy7410 8 лет назад

I just watched the video couple of times. The flashing code was 47 on my 2001 Ford ranger. . Went under the passenger seat, pulled out the connection and squirted WD40. The warning light went off for good. The Auto Zone guys would not want to even do the diagnostics as it was "safety issue"and directed me to go to the dealer. Thanks Chris.

@chrisfix 8 лет назад

+Palanisamy Rathinasamy AWESOME! Glad the video was helpful!

@edwardmyers1746 7 лет назад

holy hell since when did chris have 1.4 mill subd

@chrisfix 7 лет назад

+Edward Myers blew up! Thanks for the support

@eegw1199 5 лет назад

@@chrisfix and a year later you're at 4.1 mil. Congrats man well deserved.

@jeettsingh1129 8 лет назад

Hi Chrisfix, I have a 2011 chevy suburban and the air bag light came on like 6 months ago. It flashed in the beginning but I didn't know it's telling me the code. Now it just stays all the time. I went to the mechanic and he couldn't find any code. It says No Connection when he connects the computer to the car. What do you think the problem is and the car has never been in any accident? Thanks!

@CoZmoTheGod 6 лет назад

jeet singh Was this ever fixed?

@Oockeshoek 6 лет назад

wondering the same thing, I have had both airbags disconnected and my mechanic says the same thing

@TheMetalmachine467 5 лет назад

I just wanted to thank you chris fix this worked on my 2015 ford explorer sport I didn't know which one it was because the light stays on but I sprayed all the connectors with wd40 and its out !!!! you saved me hundreds the dealer would have charged and they probably would have done the same thing

@jwhiteworks 5 лет назад

Excellent!!! Just fixed mine thanks to this video. Thank you soooo much!!!

@user-nw6wd7lw3x 7 лет назад

Hello Chris. I have airbag code 18 on Nissan xtrail t30. Do you know? what's problem..? you think, Is it fix difficult..?

@aaronsalvatore665 7 лет назад

It's an seat belt pretensioner. But I have no clue what that is.

@anapadilla4039 5 лет назад

I have the same code 18 ford ranger 2003 any one know what to do please 🙏

@JorgeGarcia-xv5zg 8 лет назад

code 42

@toycarcrush 4 года назад

might be the crash sensor in front of your car!

@eds5881 6 лет назад

A Big THANK YOU. My airbag light came on yesterday on my 02 Ford Ranger. I did this and it fixed it.

@cirosotomayor818 5 лет назад

You're really good at explaining stuff

@therealdarkknight480 5 лет назад

00:02 face reveal !!!

@bnellynel 5 лет назад

WD40 on electrical connectors hahahahaha only on RU-vid 😂😂😂

@stranger_danger1900 4 года назад

It works....

@jeremypinder4436 4 года назад

can i use pb instead of wd40

@AndysGeneral 3 года назад

Would MAF cleaner be better?

@NoSoup4U2 3 года назад

I'm into metal detecting, & I often get detectors that are no longer working, because of bad battery corrosion. I spray WD40 on them, use an old toothbrush after it's sat for a few minutes and 9 times out of 10, it solves the connection problem. So you can LOL about WD40 on electrical components all you want!! BUT IT WORKS!!

@AMPMChatt-Jax 11 месяцев назад

Hes got 2.4 mil subs now

@pete9639 4 года назад

Thanks Chris, I just fixed my '02 F150 because of your video. The flashing code you talked about led me to the passenger side. Keep up the good work! :-)

@HAZARAZZA 2 года назад

WOW AMAZING!!!!! I have a 2005 Vauxhall Corsa, thought I’d try this and I was not disappointed, didn’t have WD40 so just a few Classico blows on the connections and bam 💥 fixed, thanks for the help man much appreciated saved me £200 much love my guy ❤️❤️❤️❤️

@Team_Nico_Motorsport 8 лет назад

Any one notice at the dash where the gears are (P R N D2 1) it says porn 😂

@GransKnickers 7 лет назад

I thought exactly that haha

@fredrickpatrick4303 6 лет назад

Park Reverse Neutral Drive (Drive2 Drive 1) 2 And 1 are for driving through the mountains and rough terrain

@redakaminekloc5167 6 лет назад

I thought that was a gear indicator, not hobby indicator.

@user-rn8pj2tq6g 5 лет назад

Not funny.

@stevenshelley9345 2 года назад

Dude that was an Awsome fix ,that light had been flashing on my 97 ford f-150 V8 .......not anymore ,thanks for sharing 😉👍

@buckwb3375 8 лет назад

Excellent production and information, and I'll try it on my 2002 Ranger when it stops raining. I might suggest a little change in the order of the video. I would mention disconnecting the battery right after you've determined the blinking code and turned off the engine. (There may be some impulsive people like me who are ready to dive into the "46" repair as soon you moved on to speaking about other codes.) Good point also about leaving the battery disconnected for 10 minutes before working on that connector. Thanks. I'll let you know what happens.

@user-lt4jn8wd2i 6 лет назад

Hi Chris I have a Ford Escape 3.0 and had code 47 . Thank your video and tips. Have a nice day.

@leazahowe196 8 лет назад

What a brilliant and easy to understand video. Thank you so much!

@YaNeK92 10 месяцев назад

Thanks for watching :)

@paulotr 7 лет назад

Great work Chris! Very helpful!

@vdrivevideo Год назад

Fixed my light thanks to you! Much appreciated!

@drez20001 8 лет назад

Excellent. Thank you my friend. I have a 2003 Explorer and the plug was white and located under the driver's seat and closer to the center console than the door. I also un-clipped the yellow plug, sprayed it with WD40 also, and snapped it back on. Warning light immediately went off after starting the car. Saved a trip to the $hop.

@brucehampton1545 5 месяцев назад

Hello sir. I have a 2000 Ford ranger with no airbag lights now. I haven't been able to locate any plug in under either seat. Can you give me any tips on finding it? I think I may have to pull the seat out.

@kristopherhadvance6649 2 года назад

You're a genius I learned a lot from you Chris thank you keep up the good work

@JOESOLDROCK 6 лет назад

Thank you young Sir! My 2001 Mercury Sable is back to normal!

@ItoPalanca 3 года назад

And this is the best way to explain youtube videos. Good job Guy

@djp6191 4 года назад

Hi Chris. Thank you!!, superhelpful I have a crown vic and my airbag light came on TODAY, I was sayin, "Oh here we go,... another expensive repair....." But now I'm not freakin out as much after watching this!!!

@sixfiguretrucking 4 года назад

Worked like a charm! Thank you!

@anthonyk6265 5 лет назад

Just fixed my 2002 Ford Ranger I had the same issue thanks a lot!!

@hnajee 5 лет назад

Chris. You are something special; the best

@ethanvandyk9028 5 лет назад

You, Sir, were right on the money. My 2004 Taurus was doing the flashy airbag light thing, but a little dialectic grease in the connector (passenger side) fixed it pronto. Thanks!

@benadams2283 3 года назад

Legend! Had the light on for 8 years.... just fixed it with this method.

@NBHank 3 года назад

Cool. Here an airbag light is an automatic fail on annual inspection. So, $$$$$$ or crusher!

@leewilliams7443 5 лет назад

Hey Chris awesome video I have a 1999 Ford E150 my airbag light was flashing code 46 and thanks to your video I sprayed contact spray on the driver's side connection and my light is now off keep up the great videos

@UTOPIAMFG 5 лет назад

Bought a ford ecoline 1998 E350 - light came up - watched this video - code 46 read, went under drivers seat, unplugged the connector, sprayed wd 40 - plugged it back turned the engine on, lights is now OFF - Made my day !!!!!

@MasteringHow-To 6 лет назад

Haha. I just googled this and a RU-vid video popped up. Sure enough it’s my buddy ChrisFix. I love you. That’s for fixing my ranger

@jackhorder 7 лет назад

Mate you just saved me lots of time and money, worked straight away.

@mdjahidhasan9673 2 года назад

Thanks Chris. Code 27 fixed -ford ranger 2002. Ford asked $240 for the airbag switch box. I bought a bulb for $3.50 and went to a mobile repair shop to change the bulb which cost me $10. All fixed around $13.50. Thanks

@robertorodriguez6772 5 лет назад

Thanks Chris for sharing this info on abs light flashing. My 2007 Mazda cx7 had a flashing abs light. After watching your video on counting the flashes, my cx7 code was 18. Cleaned the connection with brake cleaner, abs light is off. Thanks again..