Air Conditioning Not Working (system performance, leak test) - Honda CRV

Подписаться 421 тыс.

Просмотров 808 тыс.

50% 1

I will show you how to find a leak on any A/C system as well as how to test the entire A/C electrical system with one quick test.
The procedures shown in this video can be applied to all R12 and R134a systems.
Tests shown
- how to locate a leak using soap, water and compressed air
- how to locate an EVAP core leak with an electronic leak detector
- how to test the compressor clutch
- how to test the A/C compressor
Tools used
- ATD Tools 3695 Deluxe Dual Aluminum A/C Manifold Gauge Set
www.jbtoolsales.com/atd-tools...
- FJC 6909 3.0 CFM Vacuum Pump
www.jbtoolsales.com/fjc-6909-...
- FJC 9281 Vacuum Pump & Gauge Set Assortment
www.jbtoolsales.com/fjc-9281-...
- Meguiars M9911 Spray Bottle W/Sprayer
www.jbtoolsales.com/meguiars-...
- Mothers 05664 California Gold Car Wash 64 oz
www.jbtoolsales.com/mothers-0...
- Bayco NSR-2168B LED Rechargeable Work Light - 600 Lumens w/3 Magnets Lithium-ion Battery
www.jbtoolsales.com/bayco-nsr...
- TIF Instruments RX-1A Refrigerant Leak Detector
www.jbtoolsales.com/tif-instr...
Related videos
- A/C Leak Testing and Repair part 1 - 95 Jeep
• A/C Leak Testing and R...
- A/C Leak Testing and Repair part 2 - 95 Jeep
• A/C Leak Testing and R...
- A/C Leak Testing and Repair part 3 - 95 Jeep
• A/C Leak Testing and R...
- A/C clutch not engaging - 2005 Honda Odyssey
• A/C clutch not engagin...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

Авто/Мото

Опубликовано:

25 июн 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@ebertlongoria2869 3 года назад

Paul is TRULY unique and very talented teacher/ technician. When I first saw one of his videos in 2011 I knew from the start I should learn from him. Glad I subscribed . He has a gift for diagnosing very complicated cases that would want to make a any other technician pull his hair out. What's amazing is he can" walk the walk and talk the talk". I bought is ebook and course which helped me to pass the L1 test the first time! I really struggled with electrical and electronics but he helped me to think and learn outside the box! Don't worry about the trolls, they couldn't touch you with a 10ft pole!! Keep on doing what you are doing Paul because you're blessed

@ScannerDanner 3 года назад

Thank you so much for this comment.

@mattmiles9779 Год назад

@@ScannerDanner Paul, where do you get the adapters to charge the AC system with shop air?

@ScannerDanner Год назад

Thanks again for this comment. Just happened on it again.

@ScannerDanner 11 месяцев назад

Can you put this comment on my feedback page of my website? www.scannerdanner.com/leave-read-feedback-new.html

@rcalzadilla 5 лет назад

This the very best instruction video I have ever seen. I am 75 yrs since birth and have serviced my vehicles myself for a long, long time but I am not a real mechanic. You are so competent, not over confident nor BSing your way at any time, always truthful and honest, not lazy. You have good brain under that baseball cap. Cannot thank you nor admire you enough for sharing so much valuable, useful information without charging a single penny for your work. All in under 45 minutes! I may not do an a/c job myself and probably use a professional to do the job, but you have given me the confidence and understanding to protect myself against the crooked "professionals" that are so prevalent in the industry today, at least, around here. Just incredible! Thanks.

@thecuss6817 2 года назад

In 2002 I had an issue with air flow out the vents of my 1988 Mazda truck, even though blower fan was working fine, and air was still cold. I removed the bottom of the evaporator case and found gunk all over the evaporator, blocking air flow. I used aerosol brake cleaner and a nylon parts brush to clean off the gunk, and my air flow was restored. But a few weeks later, my R-12 had leaked out, and I suspected the gunk was R-12 oil mixed with dust. I used soap bubbles to confirm a leak right in the center of the evaporator, and my 11 year-old daughter helped me replace the evaporator.

@teresapeabody2746 3 года назад

By the very nature of the design of the shraeder valve, it is more likely to leak under vacuum than pressure. by design, pressure tends to hold it closed as a vacuum would tend to open it.

@kellismith4329 Год назад

That system never operates in a vacuum though

@Cokie907 Год назад

@@kellismith4329 Captain Obvious reporting for duty! 😂

@redrustyhill2 Месяц назад

Good luck finding a leak under vacuum

@davesage9190 7 лет назад

Nice camera work. Smooth and steady and right on point.

@fieldsofomagh 7 лет назад

This was a great in depth, real life, no holds barred video with quite a lot of useful practical information on faultfinding the A/c system. There was 4 essential pieces of equipment used in tracking down the fault. No 1--- was the set of gauges, No 2--- was the vacuum pump, No 3--- was the fault locator, No 4---- was the compressed refrigerant. These items would not be beyond the budget of the average diyer when the long haul is taken into account and the amount of savings could prove substantial. Nice camera work by your son and shows great promise for the future.

@ScannerDanner 7 лет назад

Thanks so much Tom!

@mveno123 3 года назад

Beat A/C diagnostic video I’ve found so far. Thanks.

@wendywhales2310 3 года назад

I Have Fixed my Car From SCRATCH,Not knowing a thing about it at all. Just Followed Most of your video's on AC Fault finding.. You Fixed my car all the way across the Pond.UK. Thanks Paul.

@stevem9141 7 лет назад

Just wanted to thank you for all of your thorough, detailed, and informative videos.

@ScannerDanner 7 лет назад

thanks Steve!

@jeffhesse8415 7 лет назад

Nice job. We usually use dye but tried the soap and water test the other day when dye wasn't showing anything. The bubbles showed us the leak. Still have a freon sniffer, 25 yrs old, still works. Excellent video showing the importance of having multiple methods to diagnose with.

@danzumaran8810 2 года назад

The patients that you have for troubleshooting is incredible thank you for all your work.

@itsnotfar Год назад

That's me too, cardboard and some slight frustration. Finding the leak is such a big win and relief. I think everyone noticed smiles afterwards. Great video !!!

@gtoboss600 7 лет назад

Working for one of the big three assembling hvac components, part of the manufacturing process for condenser cores is a bursting pressure procedure to verify the product meets its specifications. This is done on randomly selected pieces through out the day. Depending on the model of condenser, the psi that is required to burst the core varies. But for a half ton truck the average pressure they can withstand is about 1400 psi before breaking apart. It's pretty impressive to think that the core is roughly 3x stronger than what it will see under normal operating conditions on the high side. Just an interesting bit of information on condensers.

@ScannerDanner 7 лет назад

awesome information! Thank you

@gtoboss600 7 лет назад

ScannerDanner Thank you for making these videos. The way you break down the problems makes the tasks manageable for the average guy working on his stuff. As you mentioned I don't think there is anyway shop air could hurt the cores within reason.

@DylanRabier 7 лет назад

I love these HVAC videos. Great camerawork from Caleb btw! Yep I've seen it happen more than once that after replacing a leaking condenser the compressor won't turn on. Awesome to tell that to your customer. So a quick check just like Paul did rules that out. 👍

@ScannerDanner 7 лет назад

Thanks Dylan!

@fieroboom 3 года назад

I know I'm watching older videos, but I can't believe this information is free... I've had a significant problem with my AC in my 2005 Chrysler Town & Country, & thanks to your videos, I've FINALLY figured it out. I finally feel like I THOROUGHLY understand how it operates, and I'm fully prepared to handle anything else that might go wrong with it. Thank you!! ❤️👍👌

@ScannerDanner 3 года назад

Awesome! Thank you and I'm glad you found me. Appreciate the comments

@johnjohannemann1220 2 года назад

As a master ASE and master Ford tech of 35+ years I’ve seen many compressor shaft seals leak only when the compressor was running. Good video as always. I love how you and Caleb keep it real.

@mobileair6416 Год назад

I agree, but disagree with using shop air for a leak test. Use nitrogen.

@mrghiax 7 лет назад

If only tv programmes were as good as your videos i might switch on the tv more! Great video Paul

@ScannerDanner 7 лет назад

haha nice! Thank you

@vincescalise4821 5 лет назад

Great informative video as always, the compressed air trick is a good thing to know And the soapy water, Doesn’t get much simpler than that Thank you Paul

@geraldmartin3625 5 лет назад

One of the few, the proud, the real automotive technicians left in this world. Your book is still on my wish list

@NSXTACY420 5 лет назад

for sure

@8953147 7 лет назад

This has to be the best approach, I've seen, for troubleshooting the AC system- thanks Paul!!

@ScannerDanner 7 лет назад

thank you jake!

@terryharvey4811 4 года назад

{read all I have a good tip at the end} I've owned 3 tif sniffers and 1 other one for 12 and 134 {can't remember the brand on it} none were satisfactory. Not sensitive enough. Have used dye and black light for the last 25 years and it works great. Allows you to see leak on evap after removal for verification. Have since bought a ROBINAIR model L D 3. It has proven to be the most sensitive, therefore the best sniffer i have ever used. I still use the dye for visible areas and the sniffer for shaft seals and evap cores.Testing a shaft seal, pull belt and tape a plastic bag around the nose of the compressor, leave over night. Poke a small hole in bag and sniff inside of the bag. This will show a small leak that gets worse under pressure that you can't find and /or test with the engine running.

@pissysoles6996 5 лет назад

I've been a professional technician for 12 years now and have never seen, or even heard about this method before.. Why dont they teach this stuff in school? So simple and effective without the need to waste freon and dye. Thanks for another great method Paul.

@davidhall3747 5 лет назад

Pissy Soles Most people don't think out side the Box. Paul does- He thinks on His feet- and knows how to exhaust all His resources. Paul's intelligent.

@davidhall3747 5 лет назад

Just used the compressed air trick on my Nissan Sentra. The compressor came on right away. Saved some money by not wasting refrigerant. Thanks for the money saving tip.

@Tahimate 5 лет назад

All I can say, damn you are good. I watch your Durango AC and surprisingly this video shows up. Your technique and approach to diagnose the problems were excellent. You also answer my question if I can pump air into the system. And a special thanks to Caleb.

@EddieTheGrouch 7 лет назад

Can anyone else picture Paul sitting in a directors chair wearing a flat cap, "Move in tighter, Caleb. Follow that smoke trail." "One more time, Danner - put some passion into it!" "Cut! That's a wrap. Check on my screwdriver order, I'll be in my trailer."

@roadkill5333 7 лет назад

Had a minor leak that was a serious gremlin!!! Turned out to be the high pressure side fitting at the compressor! Had my gauges on while searching! Never considered the fittings!

@randywilson8300 2 года назад

One method I learnt for checking a leaking evaporator is checking the drain hose and you will see an oily residue at the end, just wanted to let you know and keep doing what you doing love your videos I'll never stop watching

@thomasgibson8025 2 года назад

Forget people yelling at you! I am searching an evap leak and your drain tube idea is brilliant!! I am going to try it tomorrow. I will let you know the outcome. Thanx Tom

@SouthMainAuto 7 лет назад

Hey Paul (Not Dan haha) if you get that job they are gravy really. Takes about two hours is all. Also remember when testing for leaks with vacuum it is about as handy as tits on a bull. 30"hg of vacuum inside the lines is only about 14psi (atmospheric pressure) on the outsides of the lines. Much better off having 150psi on the inside right? A lot of people over look that fact and think if it can hold vacuum it is good when indeed it can usually hold that unless the leak is huge. Also under vacuum if the system is full on non condensable gas and moisture it will increase gauge pressure under a vacuum as it continues to boil off and trick you. A micron gauge comes in handy for checking that. ANy how glad you found the leak! --Eric O.

@ScannerDanner 7 лет назад

Thanks Eric! Good to hear from you my friend.

@joeysmama8701 7 лет назад

South Main Auto Repair Hey Eric O, thanks for your upload today. This was the best 4th of July gift you could have given me. You and Scanner Danner should go into business together. That would probably be the best auto repair facility in the country. With all the knowledge that you guys have, there wouldn't be car or truck that you guys couldn't fix...✌😀✌

@Charlie-vv2fd 7 лет назад

Excellent video Paul. I used your techniques from the other videos to find a compressor leak through shaft seal using compressed air. No refrigerant wasted. I invested on a vacuum pump, AC manifold and a reman compressor on a 95 Maxima that is sitting on the driveway as a backup only lol! People asking why even bother with it but I did it to gain valuable experience and the tools will serve me well in the future. I think of it as shop time lol. I posted my finding on the forum so thanks again!

@ScannerDanner 7 лет назад

Awesome! Thanks man. I have a hard time frequenting the forum and appreciate your comment here.

@Ashroyer86 7 лет назад

charles acosta I like your way of thinking.

@of5140 7 лет назад

charles acosta Good job man. I'm the same. I'll do stuff like that to gain valuable knowledge. You'll have lots of people asking why you do stuff like that or giving you weird looks. Screw em and do what helps you progress in life.

@terryharvey8627 5 лет назад

Trash,aka leaves, can close off a leak under vacuum while air pressure will show leak. Had a hose leak that vacuum pulled a foam insulation tube tight and closed it off. R 12 of course leaked. I could hear it. That taught me a lesson. Holding vacuum does not mean no leak under pressure. Lisle now makes a stethoscope with a hollow tube. I made one years ago from the Y from a nurses old stethoscope and a piece of brake tube. This is great for air and vacuum leaks as well as finding noises on the front of engines. Bearings like water pumps, p s pumps, alternator, idler, and belt tensioner pulleys. Love your stuff. Keep up the good work. One other thought, I taped a freezer bag around the nose of a compressor and left it over night. Next morning I opened a hole in the bag sniffed it and found a small pesky leak that had been driving me nuts trying to find it.

@7878lonewolf 4 года назад

I really appreciate how honest u r.

@rollingrockfan2482 7 лет назад

Great video I have never considered shop air for leak locating I thought it would damage it with just air, again another great one !

@geraldsanford2411 7 лет назад

Use shop air if the system is totally empty tho

@rollingrockfan2482 7 лет назад

Oh yes I can't recover so it must be like Paul's video was the big fat 0

@humidbeing 7 лет назад

Back when I first started doing AC work I was so paranoid about the system being open for even a second. Now I embrace the pressure test and usually don't replace receiver/drier unless debris in system. I trust my vacuum pump and physics to do the work.

@ScannerDanner 7 лет назад

yep, exactly. And the dryer should be changed in theory but I've done hundreds of these where the customer doesn't want it changed and I'll still see the car years later (as I'm still servicing it) and everything is fine

@davidhall3747 5 лет назад

I like Paul's honesty about the liquid line filter dryer. When the system is in a vacuum- all moisture will be boiled out of the system. So technically- there's no need to replace the Filter Dryer.

@anthonysova7117 3 года назад

@@ScannerDanner yes sir in theory your correct you can get away with not changing driers on medium to hi temp like cars but not medium to low refrigeration it’s a no brainer you must I enjoy watching a car guy that understands refrigeration cycle watched utube guys not using a vacuum pump because they been doing that for years. Enjoy your knowledge and your book which I used to diagnosis a 5v reference I’m a retired hvac ref service tech by the way when I began my career you where on your own island as far as no BEEPER CELL PHONE and knowledge was obtained thru the manufacture and lots of reading Today u can reach out to everything available curtesy of the internet. Cheers

@PaullyG1991 5 лет назад

Your really helping me understand hvac with cars I'm trying to make another source of income with the summer in California Your really making a Difference in my life brother Thank you!!!

@donniejohnson7499 Год назад

great video Paul. it's awesome to see you troubleshoot all Automotive systems. thanks for posting all your videos.

@ScannerDanner Год назад

Thank you Donnie

@majwor3763 5 лет назад

Adding Shop air is a great way to test the A/C integrity along with finding leaks. You can crank the engine...turn on the A/C and do alot of checks without using any refrigerant. Love the nitrogen guys. They should know that the air we breathe is 75% nitrogen...Most shops have water traps to REMOVE moisture out of the shop air. Been doing it this way for 36 plus years. Very cost effective! Check your manifold guage lines too at the service valves and at the guages...found plenty of leaks there over the years...lol

@trevor311264 3 года назад

The only reason nitrogen is used is it is the cheapest bottled gas there is, it is only used because there is no moisture..

@jammerp226 6 лет назад

Fantastic ! I learned so much

@GCraigmile 7 лет назад

Very Nice 👍🏻 👍🏻👍🏻 Its fix A/C units time of year everywhere and it's very cool to see someone else ether then "Me" doing it.. Great Video Bro' ....

@richardmcwhirter9396 7 лет назад

Good work yet again,not an easy diagnosis and an even harder fix!!Thanks for sharing 👍👍

@ScannerDanner 7 лет назад

Thanks Richard

@georgekonrad911 7 лет назад

Another great video! As far as testing with air instead of nitrogen goes, remind the know it all's air is 79% nitrogen

@ScannerDanner 7 лет назад

I won't argue with the nitrogen crowd. It's just not practical for me, especially given the few AC jobs I do per year now. Buying a tank and then getting it filled is the difficult part. I have a small tank for my EVAP machine and I could not find a place to fill it. Air it is man. Thanks George

@michaelszczys8316 5 лет назад

If you were going to leave it in for a long long time I could see it, but just quick testing just make sure air isn’t full of water or oil or other junk.

@bigdaddymak1439 7 лет назад

For those on here pushing nitrogen just remember the air is made of approx 80% nitrogen!! And if you're worried about moisture any leak repair on a vehicle should include a receiver dryer!!

@irench 5 лет назад

to say nothing of when the proper method for charging is employed a vacuum will be applied for a min of 20 min and will boil any moisture from the system

@alazanjoe 3 года назад

Thanks for all the info Very thorough and informative

@RicardoMartinez-ug4vv 7 лет назад

Mr Danner I really like these AC videos, keep up the good work!

@ScannerDanner 7 лет назад

Thanks Ricardo!

@thelifescout8335 7 лет назад

Sneaky Pete coming around the corner to get into the camera shot. lol

@ScannerDanner 7 лет назад

haha I know

@rogerd4559 4 года назад

I was told the compressor shaft seal is the number one major leak in auto ac. If you want to avoid a leak you should cycle the AC in winter months often when not normally using the AC to keep that seal from drying out, shrinking and leaking

@ScannerDanner 4 года назад

the AC clutch comes on automatically in the defrost mode, also, below about 40 degrees F the AC compressor clutch will NOT engage, even if you select the AC to turn on

@Cokie907 Год назад

@@ScannerDanner And there lies the problem. Southern cars do not use the defrost setting much. If you're retired or work from home, you don't have to drive on inclement days. There's another missed opportunity to use the defrost/defog option. My AC went out on a 96 Saturn for the first time in the 25 years I've owned it. I suspect this very problem. 😥

@randallposey4392 4 года назад

I enjoyed the video as it was very informative. This will help me repair the ac on my 1993 Buick Park Avenue.

@jugubantan7740 4 года назад

Mr danner your the best teacher....I have a lot to learn from you!

@jrperrotta 2 года назад

Nice presentation! After watching this I've come to the conclusion that the quickest way to identify the leak would be to sacrifice a 12 oz can of refrigerant into the system and use your Leak Detector straight to the difficult places first, like the compressor and evaporator drain tube. Of course when installing the refrigerant the system needs to get the compressor started and if not hot wire the low refrigerant sensor. and from your experience Dan what would you say is the most common failure points? Compressor? Evaporator? or condenser?

@efrensaclolo7021 2 года назад

In my Honda was the condenser,found out it was hit by a rock in the front of the grill,so I will put a mess screen to protect the condenser from bugs and rocks.I sprayed it with my grandkids bubble maker to find the leaks.

@lorraineforrester1298 Год назад

Paul is very good at explaining this to me it's very much like your central air conditioning it all makes sense

@swallowinn4410 7 лет назад

Hi Paul (Scanner) Great video and very useful information for the DIY'er. I have ons suggestion foryour test kit. If you do not have a sniffer I have used a balloon over the drain tube. Surprisingly it quite often works with leaks of the size you were experiencing. I just use a little electrical tape to hold deflated balloon onto the tube and it is quick visual confirmation of pressure on the drain system. Unfortunately does not work well on small leaks under 1-2 lbs/HR.

@ScannerDanner 7 лет назад

nice tip, thanks!

@michaelszczys8316 4 года назад

Since you are using air in the system maybe you could put something like a little ammonia or something that will evaporate out but something you could sniff out with your ‘ nose ‘.

@JD-526 4 года назад

Nice job, good use of the soap & water test i would have never thought of that. Can't make money watching TV but you can make money watching scanner Danner's videos. Great job. Going to order a leak detector.

@ScannerDanner 4 года назад

Thanks JD

@ozzstars_cars 7 лет назад

Your closing in fast paul on the big 100K sub mark, awesome!!

@DudeTastic13 7 лет назад

Evap Core dead after 5 years (2012)? Was expecting more from a Honda. Great video though. Not too many people teach complete diagnostic these days.

@ScannerDanner 7 лет назад

Thanks Daniel

@Enrightauto 7 лет назад

Daniel Yip extremely rare been working for Honda for almost 4 yrs. have never seen a evap leak on one of those must be a fluke. The 07-09's are super common for clutch coils but don't see too many leaks except for condensers from rocks

@lucianlucian9911 7 лет назад

I hear you brother, too much metal over the years may hurt your ears. :)

@tebjmd 5 лет назад

Fantastic! You're the Man! Thanks so much for all of your videos!

@R.E.HILL_ 7 лет назад

really enjoy watching your videos, especially when you're out and about in the field... and some video of the travel to the job, that's gravy too.

@ScannerDanner 7 лет назад

thanks R.E. Hill

@ovwok 7 лет назад

The problem with using vacuum to look for a leak is your only dealing with 14.7 psi at best trying to get past the seals and that would be at sea level.

@joeshearer1247 7 лет назад

Mark Patton should use a micron guage

@Carlitosway211 7 лет назад

Nitrogen is the thing to use. Crank the regulator up to 200psi. You'll find the leak.

@andrewwmacfadyen6958 7 лет назад

The problem is more the some leaks act like a one way valve, small gaps and cracks can close up when the pressure difference acts pushing from the outside. Positive Internal pressure will always tend to open up cracks.

@nickloss 7 лет назад

especially on compression seals, where the vacuum would actually suck the gap closed

@billrimmer5596 6 лет назад

Mark Patton Mark is a super cool guy!!

@akpd1 5 лет назад

The first thing I would check is the Schroeder valves...

@jcortes3930 4 года назад

Scrotum valves

@jeramiet154 3 года назад

No pressure in the system would give you Jack shit so youd have to disturb at least one valve to put pressure in the system anyway.

@Crappie_Hunter_Seeker 7 лет назад

Awesome education Paul. Excellent job. I am VERY appreciative !

@ScannerDanner 7 лет назад

Thank you!

@egimene1 4 года назад

Really i understand you because you are not a magician....the way you have to explain is perfect for me thank you so much

@youtubebitchcenter1463 5 лет назад

You do know your sniffer tool went off the first time when you had it at the drain tube at 24:23 should have left it there a little longer.

@Wrenchlife604 7 лет назад

Good diagnosis. Im surprised it held vaccum. Normals i let it sit on vacuum for 15mins then let it rest for 15 mins. Have you had luck by running the a/c then using the leak detector in the hvac vents instead of the drain tube?

@Tedybear315 7 лет назад

Not really a valid test. Blowing air into the detector usually will set off a false positive. The detector has a tiny air pump that draws in a metered air amount. It's just as easy to sneak the detector probe to the drain tube. Check towards the end of the video where he states not to blow air or have blown air into the probe.

@ScannerDanner 7 лет назад

exactly what I was going to say Wrench life 604

@albertocervantes4432 3 года назад

“Too much Metal over the years” You Rock ScannerDanner!!!

@jeffarmer4428 7 лет назад

Great vid Paul , learned something new here . Back in the day (80'S) we would have put a partial charge in the system an use are shop electronic leak detector .

@mikem1014 7 лет назад

use ac oil in serv port to check for leak

@ScannerDanner 7 лет назад

That's a good idea

@terryharvey4811 4 года назад

i use ac oil also to check the valves.

@lustfulvengance 7 лет назад

Most common leak points: 1. Service port valves!!! 2. Compressor 3. Condenser

@daddyjay319 7 лет назад

most common ac failures on ford dryer switch and evaporators. all cheap material

@nickloss 7 лет назад

I'm pretty sure its the low side port on my Chrysler. Granted, I accidentally overcharged the system, but when I removed the connector I could see the anti-leak bubbling out of the port. Wasn't happy to see that..

@richardmounfield7822 6 лет назад

Like your test methods, never thought of compressed air. Great still learning at 59 years of age very informative .

@MrMagsimus 4 года назад

Thank you Dan your videos are great for info , nice camera work 🇬🇧👌👌👍

@herlbertomurcia5023 4 года назад

On Hondas.the dryer is built in.with co denser.

@truthteller9562 2 года назад

This guy is a joke. How can you teach someone something when you don't even know wtf you are looking at.

@bitkurd 7 лет назад

Receiver drier on 2007-2011 Cr-v is mounted on the condenser on left side

@brianmock551 2 года назад

Enjoy spending time with you guys!

@danparker1925 3 года назад

You are one smart and thorough mechanic

@rooanashan 7 лет назад

receiver dryer is in the condenser

@chekelley6861 7 лет назад

Uh oh. Pete is gonna repair that AC system without a recovery machine! I hear the black helicopters spooling up! LOL!

@tpcoachfix 7 лет назад

Che Kelley I was thinking the same thing myself. He'll have to bring the car to a shop with a recovery machine.

@andrewwmacfadyen6958 7 лет назад

In the real world the small amout of R134a added to the system will have long gone before the parts even arrive.

@chekelley6861 7 лет назад

Andrew W MacFadyen I know. I was just being a smart ass.

@ScannerDanner 7 лет назад

haha I know right?

@channelofstuff6662 6 лет назад

dont think they really care with all the car accident every day plenty of them empty freon into the atmosphere. its all about tax money.

@johnmiller2403 2 года назад

Best presentation of A/C diagnosis procedure I've seen. (as a non-mechanic)

@ScannerDanner 2 года назад

Thank you John!

@danjensen100 6 лет назад

You said Pete didn't have an evac machine, then at the end of the video said you were gonna have him evac it with his machine.......lol. just busting your chops, I love your videos and appreciate you. (15yr master certified MB tech and you've reignited my interest in learning and diagnosing, thank you!)

@ScannerDanner 6 лет назад

He didn't have an r134 machine so we converted his old r12 machine to do the job. I'll show it next time :-) Thanks bro

@gearwrench877 7 лет назад

ohh i died @ thats what she said !!! hahaha

@ScannerDanner 7 лет назад

I was thinking if I don't make the comment, someone else will :-)

@filibertobarrera3839 7 лет назад

ScannerDanner Looked up Danner in the urban dictionary. It means one of the guys.

@ScannerDanner 7 лет назад

haha really? That's cool

@Travelingman-1980 7 лет назад

I'd like to service my car's a/c, but in Australia r134 is not available to the public.

@stigonutube 7 лет назад

Travelingman 1997, i hear your pain mate,

@throttlebottle5906 7 лет назад

wont be long and they'll snipe it from USA also

@zfiddy 7 лет назад

thankgod its not available! too many dodgy backyarders becoming experts!

@Travelingman-1980 7 лет назад

ZED , and you are judge and jury of your speculative claim. What has an imaginary God, got to do with maintaining automotive a/c systems? It seems the US treats it's citizens as adults, unlike Australia where the government likes to decide for you.

@BlueRage 5 лет назад

Order the cans off of eBay....there's all kinds of brands Red Tek being one of them. They're based off of propane. Turns out propane makes a great refrigerant and is compatible with R12 and R134 systems.

@vladipful 7 лет назад

Paul your video's are AWESOME and very helpful, learned a lot and will continue to learn, thank you very much.

@ScannerDanner 7 лет назад

Thank you Vald K!

@joycemarkdoyola766 3 года назад

SD thank you for this videos additional knowledge for me as a auto technician.

@joelopez40oz23 7 лет назад

ScannerDanner throwing up the West Side at the end

@mikem1014 7 лет назад

scanner both hi an low open is best because it is faster

@dhood15277 3 месяца назад

Surprised the compressor was not also leak tested. This video is super good, helped me a lot with my 87 r12 car.

@emtscythe3782 7 лет назад

Excellent diag Paul. That's what this channel is all about about. Many guys would just throw a compressor or condenser at it because " they've fixed 100s of theses ". It will bite you in the butt. Test don't guess. I can't believe it held vac with a Evap core leak. As usual a great example of showing future techs how to go though it correctly and get it repaired.

@ScannerDanner 7 лет назад

I know! I was surprised too. Thanks so much for the comment

@MrSamadolfo 5 лет назад

😏 just roll the car into a swimming pool, that shud help u find the leak fast ☺️

@elliotmedrano9612 5 лет назад

It's666

@sqeekykleen49 5 лет назад

Make sure you add a couple gallons of dish soap to the pool first.

@hxc7273 7 лет назад

If you're gonna make a pocket screwdriver make sure it has a good magnet on it. They're all so weak.

@ScannerDanner 7 лет назад

one where you walk past something metal and it pulls itself out of your pocket right?

@nickloss 7 лет назад

@ScannerDanner at the bare minimum, haha

@undergod1987 7 лет назад

ScannerDanner or just rips your pocket off.

@wb6csh 4 года назад

So strong so that when a lady comes in to get her car serviced, she says "Is that a magnet in your pocket, or are you just happy to see me?"

@megomiftah 7 лет назад

very nice video, sir waiting for hybrid synergy technology to catch on your camera because you are the most great honest (person in) teachers i ever seen.

@MG-it9mw 2 года назад

So impressed with your extraordinary knowledge and communication skill. Thanks

@ScannerDanner 4 года назад

8-17-19 Don't forget about the SD merch you see above me^^^^^^^^^ 100% of my proceeds will be going to charity. When I have the list complete, I will be putting them up on my website (who we will be helping). Right now I have a pro life group called the Human Connection that offers free ultrasounds to women considering an abortion and of course a ton of other benefits for these hurting woman. I also have Light of Life Rescue Mission (homeless shelter in Pittsburgh) and a list of about 5 or 6 more. I think I will probably only go with 3 charities for now, to get the most help we can to these people.

@paulypc6351 4 года назад

ScannerDanner yow hi watch ur videos very informative hi have a 2008 Honda Accord 2.4 ENGIN but my Ac only come on when you start the car it only come on for 10 Second can u offer me any advice ? Please N thanks 🙏🏽

@JD-526 4 года назад

Your a good man Mr Danner.

@kirkbrown2147 3 года назад

Water boils at 212 f and 100 c

@zoltanszollosi8595 3 года назад

I’m here to pick puu

@R.E.HILL_ 7 лет назад

Nice one. Btw why do you americans insist on using a temp scale based on one dudes rectal temp? your car industry is for the most part metric, why not go celsius too? ☺

@ScannerDanner 7 лет назад

hahaha

@Tedybear315 7 лет назад

"Rectal" plays a large part in design of American (and also import) designs of automotive. We're often heard to say in the field "What A&&hole designed this???"

@filibertobarrera3839 7 лет назад

ScannerDanner Can you use that tool to put in the a.c. vent.and detect the leak through the vent also. Will definitely look up that tool.100% better than the dye leak finder.

@ScannerDanner 7 лет назад

Filiberto Barrara You cannot have the blower running at all, due to false positives. So no, unless the leak is huge, using the vent in the dash is not a good test. The drain tube is always best for testing the EVAP core. I found the updated version of the tool I used and linked it in the description of this video. Thank you!

@filibertobarrera3839 7 лет назад

ScannerDanner Thanks good to know.your method of looking for this issue.Just saved me hrs of wasted money and work.Thanks again.we appreciate any video you make .

@jonathanallende826 4 года назад

Dryer in new cars are inside the condenser... its remove by a torx or allen nut underneath the condenser! Good job man every tech has its own way to check and repair, you re a pro because we the techs mainly protects the ozone and thats the main reason of this profession... God bless!

@amirgoldline 3 года назад

God bless you God bless you. I'm learning so much from your videos honestly. Thank you that you share so much information so humbly and in simple terms and explanations that we can understand i mean totally new to the field of hvac like me. Appreciated 🙏✌

@happy543210 7 лет назад

for very slow leaks, soapy water will not do the trick. charge the system with r-134a combined with florescent die. when the system is empty, look for florescence with a black light. if you can't find the leak under the hood, the evaporator must be replaced.

@lustfulvengance 7 лет назад

Right but if you get one that's COMPLETELY EMPTY you don't want to start off by putting Freon in it until you verify that there is not an enormous leak somewhere (using air)!!

@daddyjay319 7 лет назад

+Lustfulvengance that wouldn't be a good idea pressuring with air only introduces moisture .. freon is cheaper and vacuum time is decreased you can alway emergency vacuum the system. .

@shmio 7 лет назад

Best to try to not vent r134a to atmosphere. Nitrogen w/ dye sounds optimal. We're all in this together.

@lustfulvengance 7 лет назад

shmio Right, the idea here is to NOT PUT FREON INTO A KNOWN LEAKING SYSTEM!! Stop with all this "OMG your introducing moisture" bullshit!! IT BOILS OUT WHEN YOU VACUUM THE SYSTEM!! And remember this is just the diagnostic part, ANY AC repair should include a new receiver drier or accumulator so you have a fresh dessicant bag! I am with Paul here, I have used compressed air and soap for years and years and NEVER ONCE had a problem!

@throttlebottle5906 7 лет назад

nitrogen works great ;)

@thatmechanicguy8773 7 лет назад

Great vid! I've never thought of doing this, and I'm adding it to the bag of tricks. Awesome! Thanks man!

@ScannerDanner 7 лет назад

cool!

@wb6csh 4 года назад

My experience with bicycle inner tube leak detection: fill a spray bottle with tap water, then add 30-60 ml PER GALLON of liquid dishwashing detergent. 60ml/gallon = 15 ml./quart = 7.5 ml/pint (16 ounces) of the dishwashing liquid. I would suggest doubling the dishwasher detergent, since Paul likes a concentrated soap/detergent solution. Mix well before using, squirt liberally to detect leaks. Home Depot sells an appropriate spray/squirt bottle. Paul - the terminology or concept about R-134a LUBRICANT may be that it evaporates after it leaks out of the newer systems, and thus is gone when you look for those oily marks? The Boiling point of water is 69F (20.56C) at 29.22 inches of Hg vacuum (0.344 psia), lower with greater vacuum. Excellent video and sound! Appreciate your logical approach, Paul "Scanner" Danner! Good Instructor! The sniffer TIF RX-1a is available on Amazon ~$121.88 (Aug.2019) EDIT:Thanks & sniffer.