Alfa 156 jtd 100-200km/h dragy 6,74sec, progress (and fail) to 500hp - DRAGY RUN at 6.40min. 

This is insaaane,cant wait to see more,keep it up maaaan

Super car, Super works I hope there will be more videos with 156 ;)

what a nice project =) well done

Your Alfa is bloody darn gorgeous, there ain't no car like a Alfa❤️❤️❤️👌👍💯💯💯

it is one of my bucket list engines this one. Love a 5 cylinder diesel

Respect 👏 ! I want this for my car !

Really AMAZING 🤩 all these work on an Alfa Romeo 156! is gorgeous 🤩 there is so much to learn from such a project ! 👏🏻

We need more videos with this car.

Great Great job! Congratulations

awesome build!

This i can appreciate so much wonderful machine keep it up.

Amazing work💪

nice work!!!

SPLENDID JOB :O!!!!!!!!!!!!!!!!!!!!!!!!!

Complimenti ❤

Ti faccio i miei complimenti per gli obiettivi raggiunti wow

Very nice work in a really nice car! I don’t drive so much so i stay with my 3.0 220 HP V6 Busso in my 166. If the day comes that i drive more then i need such a 2.4 Diesel too!

Very nice bro You should post more videos of acceleration and driving

Cool project

Very nice to see the possibilitys with this engine. I have this engine in a 1974 giulia. Currently just under 250bhp/500nm so plenty of room for more if i fit a stronger gearbox. I'm planning on fitting the same engine into a giulietta 116 and going for more power. 500 might be a bit much but 350-400 must be possible 😊

Beautiful ❤

Grandissima auto grande motore

...planning to go on road with my 159 2.4 like you did with your 156, but I need to find a way to keep my Q-Tronic in one piece 😂 🤣

L O V E E E E E E E E ❤️❤️🌟💪🏻💪🏻👏🏻👏🏻👏🏻

Super!!

I have a 1.9 16v with gtb2060 and 3xx bhp... But this is amazing! Great job!!!

I would love a video of the car doing acceleration without music. The 5 Cyl sounds so nice.

WOW echt geiler Typ Respekt! Bin per Zufall hier gestoßen. Ich habe eine frage und zwar habe ich mir einen 156 1.9 jtd 8v geholt (115ps) Ich habe bereits einen GT2260v Lader mit Krümmer schon rum liegen. Was müsste noch alles verstärkt werden für Standhafte und gesunde 190-210ps? LLK, Hochdruckpumpe R65, Map Sensor 3.5 oder 4 Bar, Kupplung. Wie siehts mit Einspritzdüsen aus halten die Serie 119er? Noch Tipps oder Empfehlungen? Mir geht es nicht um die Maximale Leistung :) Überlege mir noch einen 2.4 Brera zu holen sind die 20v gute Motoren? Liebe Grüße aus der Schweiz

I just want to drive that car only once.. I can just imagine how good feeling it is to push it hard..

Thanks! What about the thickness? Somewhere I’ve heard 2mm, is that right? And are they special made ones or just some generic washers with right diameter? Also does that washer go under or on top of the stem seal plate? I did some measurements and if it goes under the stem seal plate , it wont reach to seal the valve guide anymore.

Gott muss lieben verrückte Menschen 🤘🤘. Top

Hi there! Is it still working? How's the engine going? Any problems? By the way i had never seen anything like that ... from 2.4 diesel engine ... amazing project!

schönes Video schöner Motor und weltklasse arbeit !!!!!! hättest du evtl ein paar tipps wo man die ein oder anderen sachen für den Motor herbekommt? grüße aus Hamburg

Hello, I have watched this video so many times. Maybe my favorite Alfa video. I'm having an 159 2.4 with big plans. I have one question for you. What diesel do you prefer? I' mostly fueling Cirkle K (Statoil) Miles. But, thinking about switching to B0. Called marine diesel with 0% biodiesel. What do you think?

dude sick build i have one question what driveshaft are you using stock or some custom i am owner of 2 156 20v one sedan and one sw ?

Wahnsinn! Etwas Ähnliches würde meinem 159 2,4 sicher auch gut stehen. Allerdings fehlt mir leider die Möglichkeit und das technische Know How. Bin gespannt, wie es bei deinem Projekt noch weitergeht. Allzeit gute Fahrt mit der Bella Macchina.

ECU - stock cf3 or 159,166 cf4?

How is your DMF holding on? I run my Brera at around 600Nm. Where did you get your exhaust manifold? Great project.

Hello bro ;) . Nice work. One question. Gearbox f40?? Or 166 2.4 10v?

Amazing job, such a lot of work for that car, that's brilliant! I'm wondering if it's true that with the time and money spent on a project like this you can have even more power on a similar diesel engine like the MB OM605. I know that they're the benchmark for massive tuning.

Hi, your jtd m is incredible, the gearbox is an original or not ?

Nice job can you help me with my 2.4?

Hello Gj for your car ! I have question : For setup correctly the wastegate mechanic how do you proceed? ( f10 turbo) Thanks !

Bonjour, ouais y a pas de boîte 6 , il faut passer sur 166 ! , J en avais une en 2009 , une 166 , 2.4 jtd !!! J avais kiffé

@hjthiessen Is there any updates on the build? I am really looking forward to them, I know you are cooking something big! On my 1.9 16v I have now moved on cp3 r90 with pulley mod, and the remaining injection system from 2.2mjet (674 inj) hoping that the pump will go on over 2200bar, do you have bigger sensor (2400-2500bar) reference you would reccommend using? Previously had R80 and 308 inj but got some complaints from the tuner that that setup wont go over 290hp... Gtd2060vz is in, welded onto stock manifold (only smoothed out, not ported), with 76mm dp but 70mm rest of exhaust. I did not touch engine head (stock springs aswell), hoping it will still do a decent job, without floating (forgot to do it when it was off the block last time)...but still aiming to keep the limiter close to 5500 as the complete engine bottom end is balanced within racing spec. I do not plan to go bigger with turbo nor exhaust, so maybe only the head porting when something decides to die... At what point did you decide to modify the intake manifold, I was hoping only to remove the butterfly from the throtle valve, would it present a big flow block (at 2.5bar, less than 350hp)? Also aside the rest, which low pressure fuel pump (in the tank) are you using? I have seen your reccomendation for aditional water pump but I havent seen my water temps going up much, maybe oem one is enough for 1.9/smaller engine... Stay strong and keep us updated! 💪

Great! Did you post the details in any forum?

I didnt watch the whole video, but does the original gearbox survive this power or did you upgrade it to?

Nice! So basically,engine is stock except a head?

hey ! i want go ported head what do you recommand for size internal ? and manifold ? thanks you !

Very Nice Job! Pump is R110?

How much torque can the stock clutch and flywheel handle on the 210hp 2.4 with a good tuneup and light mods? And what clutch upgrade is best then

Amazing! What about 0-100 time?

Hi,top speed acceleration come in? :)

You have some kind of valve spring mod? I’v heard some washers under springs and lifters but dont have exact info about it.

Hi mate. Top project!!! Can you tell me the gearbox code which you use?

So whats current fuel pressure and amount you are running on? And how much could you reach without the pulley mod? Its an R80 cr hp pump? BTW I am shocked how does that size turbo spools up already on 2500rpm :O And I dont quite get whats the purpose of that exhaust flap?

Servus sehr geiles Projekt ich hätte mal ne frage ich hab ein 156 2.4jtd mit 140ps hab den rail druck und Ladedruck schon anheben lassen straight pipe ist auch schon drinn wollte mal fragen was ich noch machen könnte das bisschen mehr Leistung ankommt würde mich sehr über eine Antwort freuen

280 km/h+nos!?

Hi, what kind of motor oil do you use in Alfa? manufacturer and viscosity? Thanks

Hallo, ich finde niemanden, mit dem ich das JTD besprechen kann, um eine Meinung zu meinem 350/380-PS-Projekt zu haben. Wie kann ich Sie erreichen? Danke!

Awesome project! Wich turbo is good For stock engine?

Can you tell what thickness the washers under springs are? I’ve tried to find that info everywhere but no luck. I did some measurements how different thickness of shims affect the seat pressure but Im not sure how close to coil bind is safe to go with stock springs.

Hello, is it enough to cool down the engine with a water circuit? Does the head not crack anymore? Thanks for the answer

How about the smoke from the exaust😂

Hi! I interested how milimeters aluminum turbo hoses? (Ф)

Did you used jet fuel and ethanol for the engine?

Did You use a stock cylinder head? Those parts are really the weak point of that engine

Pomiary draggy robione z górki no proszę...

i have a astra 1.9 gtd2262/65 ;) 308 injectors r80 pump light car ^^

Hi bro 🙋🏻‍♂️ what is happening with car? When we will see new setup or some new video? Greetings and thanks

Hi, where I can find gm f40 box cd?

Ich habe ein 159 2,4 210ps, was müsste ich alles im motor ändern für 350-400ps. Was kann stock halten und was braucht ein upgrade?

Hi I have 147 1.9 8v with stage 1 What is the setup for stage 2?

From we're you get pulley and pulley belt? From which car?

How does the gearbox cope with such incredible power?

Avete usato collettore 2.0 20v fiat coupé?

name of the rims please!!!Is it 17 or 18 inch???thanks

Hi! I could get the music please?!😍👌

Update? Do you still have this car

Is it made in Bulgaria?

@hjthiessen Sehr geehrtes Thiessen Team, ich habe einen Alfa Romeo 166 2,4 JTD DPF mit 185 PS Besteht die Möglichkeit, dass ich Kontakt mit Ihnen aufnehme. Ich erwäge eine zuverlässige Leistungssteigerung meines Wagens. Nicht nur "Chip-Tuning" sondern: - ggfs größerer Ladeluftkühler - größerer Lader - egr delete (?) Könnten Sie mir einen Link zu Ihnen senden ❓ Es würde mich freuen. LG

Are you romanian?

1:48 Anybody knows the profit of straight drive shafts?

Max speed ?

slow

hello an alfa 159 2.4 jtdm. my turbo gt2865v do you have a reference for the fuel rail pressure sensor? please, and reference for injector noses thank you