Тёмный
No video :(

Alien Fused Clapton Coil Build Tutorial for Beginners - The No Stretch Method 

Kenny Reese
Подписаться 69 тыс.
Просмотров 378 тыс.
50% 1

How to build an Alien Fused Clapton using the no stretch method. This Alien Fused Clapton coil build tutorial for beginners video should help you learn how to make an Alien coil using the no stretch method. When making alien fused clapton coils the normal way you need to take your decore and walk it out, stretching it out, so it can be used to alien wrap your cores. The no stretch method allows you to skip this step, saving time and making the whole coil building process easier. Like learning aliens for the first time, learning the no stretch method can take time, patience, and a lot of wire but when you finally master it..... It makes building alien fused claptons a breeze
If you'd like to help support and sustain this channel and earn some awesome rewards consider becoming a patron: / sherlockhohms
Become a Member for Exclusives and Giveaways: / @sherlockhohms
Connect with Me:
Instagram: @sherlockhohms
Join Our Community: goo.gl/H8rDgv
For business inquiries or to have your product reviewed: sherlockhohms@gmail.com
Battery Safety and Resources:
The best info and battery testing/rating:
Battery Mooch (The Battery God): goo.gl/gAVWCQ
Where I get my batteries: goo.gl/zWWvyC
Hashtag activism isn't cutting it anymore. It is up to every single one of us to fight for ourselves. It's time to step up and get active. If you can't name your senator and congressman right now then you're not doing enough. If we lose the fight against the FDA, the blood of the industry will be on your hands and you lose the right to complain. With very little effort you can make a tangible difference. Seriously, get off your ass and make a call, write a letter or email, fight for the industry that saved your life. To find out more, visit casaa.org , notblowingsmoke.org , august8th.org or any other advocacy organization.
The Product reviewed may have been sent to me for the purpose of review. This will not alter, change, or influence my opinions at all. What you see is what you get. I only do honest and unbiased reviews. My goal is to help you make better informed decisions before spending your hard earned money! Want to see something reviewed? Let me know!
#sherlockhohms #coilbuilding #AlienFusedClapton

Опубликовано:

 

25 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 421   
@SherlockHohms
@SherlockHohms 6 лет назад
Do you have any alien tips and tricks?? I’d love to hear about them! Let me know in the comments!
@Mike-td3qm
@Mike-td3qm 6 лет назад
What's flavour like on these coils? When I bought a 5m roll of wire pre made alien wire it pretty much ruined the flavour so I've never messed with it. Any advice is much appreciated :)
@SherlockHohms
@SherlockHohms 6 лет назад
Michael Butler any time you buy that premade Chinese wire garbage you get what you pay for. Prebuilt coils made by a local builder are totally different. And yes the flavor is amazing
@Mike-td3qm
@Mike-td3qm 6 лет назад
Thanks for the response. It was dynas wire. I'll attempt wire builds in the next few weeks. Apparently fused clapton is good for beginners, would you agree.
@SherlockHohms
@SherlockHohms 6 лет назад
Michael Butler start with claptons. Have you built anything at all yet?
@Mike-td3qm
@Mike-td3qm 6 лет назад
I’ve been building coils for over a year. Just never made wire. Been using a drill to straighten all my wire since my first build. I’ve got loads of wire, just needed 36 gauge. Got a vice and most types of pliers. Very patient with this sort of stuff as well :) Keep up what you’re doing. Your content is amazing 😁
@TonyTon3
@TonyTon3 6 лет назад
Dude, love your channel. With the help of your videos I've gone from never having made a coil to claptons, fused claptons, framed staple and now alien fused claptons... in one week. The enigma is set in my sights. Thank you so much!
@patrickallen7363
@patrickallen7363 6 лет назад
Wish I had seen this video before I butchered some wire last night. Was my second time attempting alien wraps I would get a small section perfect then another as a mohawk. Gonna have to give this method a try next time. Keep up the great videos.
@soalshift
@soalshift 6 лет назад
I honestly went through 90 feet of wire and 12 or so hours before building my first successful alien. Now I zip it with no issues.. happy building guys!!
@Aga00007
@Aga00007 6 лет назад
After approximately 7 hours, i finally did my first coil build and it was alien coil. Lol. Thanks Sherlock!!! :D
@SherlockHohms
@SherlockHohms 6 лет назад
Source you’re welcome!! Congrats man!!
@reviewingdutchman1039
@reviewingdutchman1039 6 лет назад
U explain the methods perfectly for beginners like me, making my own coils. It is quiet difficult to get all the kinds off coils u can make, and the tools u can us for it. So thanks, it's make it for me easier to understand because, maybe u noticed it already, that English is not my daily language.
@strykerr96
@strykerr96 5 лет назад
Just knocked out a beautiful set of them 2nd try with this video! 10/10 thumbs up
@gekkoukasane
@gekkoukasane 6 лет назад
Omg. Thank you. I'm building a jig now to spin wire. Gonna need to grab a tonne of wire, a good swivel, and a pack of them rubbercoated paper clips!!!!
@Jallandhara
@Jallandhara 5 лет назад
This is the closest thing to a truly wholesome vaping channel I’ve run across. I appreciate you.
@SherlockHohms
@SherlockHohms 5 лет назад
Thanks! I appreciate you!!
@XFTP5150
@XFTP5150 4 года назад
Thanks for the video..ive attempted and gave up so many times.. then watched you video and finally got it
@liamandxaviersrandomthings9084
I've loved hometown hero juice since I started vaping. 2 yrs ago I bought a Kanger tech starter kit and a 50ml bottle of rice crispy treats. Never turned back and my wife and I haven't had a cigarette in 9 months. Thanks for your time and effort hohms
@tastybudz2.018
@tastybudz2.018 6 лет назад
We just wanted to stop by and say thank you for your video! Keep it cloudy!!!
@angquangle5296
@angquangle5296 5 лет назад
Great! Exactly it's information i need. This tutorial help me better than some videos in my country. Thanks so much!
@adammarquardt1112
@adammarquardt1112 4 месяца назад
Another little tip for everyone that watched this video that he didn’t mention. If your alien has the perfect S shape when your wrapping it, the alien wire will hold the cores together in a line making it so you don’t need a paperclip or anything else to keep your cores together.
@alexmedrano6125
@alexmedrano6125 6 лет назад
You're badass Sherlock I like your tutorials I bought a few coils off you about 4 months ago and I got to say they all last a long time
@SherlockHohms
@SherlockHohms 6 лет назад
youre badass!
@wazoo2
@wazoo2 6 лет назад
Damn, looks so easy when YOU do it... Great video!
@SherlockHohms
@SherlockHohms 6 лет назад
you get the hang of it eventually, keep at it
@josephsmith5713
@josephsmith5713 6 лет назад
tension will help, I normally run my wire from the drill to a swivel at the end of my desk clipped onto a c clamp even when using the daedalus coil jig, especially if I am going to clapton a 3 or 4 core clapton. Hope this helps
@ctfcotfas1092
@ctfcotfas1092 6 лет назад
the paperclips and ,,the no stretch method,, ...........work the best for me.....simple and perfect :D....thank you for tips
@Vision_Thing599
@Vision_Thing599 6 лет назад
Most excellent Hohms. Click, click and click! Keep them rolling, really enjoyed.
@timhooson-jones393
@timhooson-jones393 6 лет назад
I’m trying this tomorrow night. Thanks mr Ohms
@davidsteinfeld9123
@davidsteinfeld9123 10 месяцев назад
I found something new indeed I am always looking for new excitement in fresh ideas I like copper as my medium and with the stuff I saw here you have my attention As a real artist in this craft and for real one artist to another I will like hearing more of this freshness in exciting new ideas For sure i will crush the bell 🔔🔔🔔🔔🔔🔔🔔 see you soon my friend
@traviswilliams2272
@traviswilliams2272 6 лет назад
Man watching you do this shit is amazing keep em coming. Happy holidays
@SherlockHohms
@SherlockHohms 6 лет назад
Thanks, you too!
@nick1fenton
@nick1fenton 6 лет назад
Thank you!!! Great video, great concise explanation too. Merry Christmas sir. Have a fantastic time.
@SherlockHohms
@SherlockHohms 6 лет назад
thanks nick, you too
@briandesjardins728
@briandesjardins728 6 лет назад
subd! clean AF build bro. and hands down the most info givrn on said build. iv been wanting to tackle aliens for awhile. iv built everything but aliens so far. even multicore staggered fused but this seems way better then stretching oncr you learn the pinch. thanks bro!
@matthewwilliams4623
@matthewwilliams4623 3 года назад
They are stunning you make it look easy lol
@jedmoreno4080
@jedmoreno4080 6 лет назад
Awesome video dude..just wrapped some nice clapton to alien up tomorrow..first crack at it, thanks for the advice
@chessygloyna8507
@chessygloyna8507 6 лет назад
I like this video. Everyone talks about the no stretch method and I never find it. Good job.
@SherlockHohms
@SherlockHohms 6 лет назад
thanks!
@ForthcomingTruth
@ForthcomingTruth 6 лет назад
so is it that you just dont pre-stretch the coil out and keep your fingers far away from the 3 cores?
@SherlockHohms
@SherlockHohms 6 лет назад
ForthcomingTruth pretty much
@nickkduhh
@nickkduhh 6 лет назад
I lost my shit when the santa hat came in 😂😂😂 gunna give this a shot right now, going to buy a new drill since i believe that's why my cores are collapsing since the jawls have a gap in the middle
@SherlockHohms
@SherlockHohms 6 лет назад
thats going to make things harder. i definitely recommend a drill with clamps that close completely
@nickkduhh
@nickkduhh 6 лет назад
What i meant was the drill i was using had the space in the middle cause it was an old ass drill. The new one i bought the day i commented on this had no space between the jawls
@abdullahrajab3830
@abdullahrajab3830 4 года назад
@@nickkduhh did it work with you the new drill, im using my dads drill i guess its made on 1988 i guess heeehhe
@jasongregorio4983
@jasongregorio4983 2 года назад
Dalm bro you make it look so easy I know if I tryed it I would have hundreds of problems
@adnansabljic1727
@adnansabljic1727 6 лет назад
Thanks...happy holidays
@SherlockHohms
@SherlockHohms 6 лет назад
youre welcome. you too!
@SolomonTheSoloOneDy
@SolomonTheSoloOneDy 6 лет назад
Yes! thanks for this! I always wanted to make aliens, but was afraid of over/under stretching it.
@shmack916
@shmack916 6 лет назад
Like button tickled!
@leedunlap92
@leedunlap92 6 лет назад
The easiest way i found is to wet your fingers and stretch it till u feel that its not springy great vid bro lil practice u will be able to make it in under 10 min
@pedrobriano7027
@pedrobriano7027 6 лет назад
Awesome video brother and can't wait to see the next one
@SherlockHohms
@SherlockHohms 6 лет назад
thanks buddy!
@charliewernette
@charliewernette 4 года назад
I think the biggest revelation for most people watching this will be that the first clapton wrapped wire you make is the springy looking wire that eventually makes the alien wrap around the regular round wires.
@michaelcard9382
@michaelcard9382 2 года назад
Sois he vjust wrapping 36 ribbon around 26 core wires or is he making 3 Clapton's(26-36) then using ribbon around already claptoned wire? Thats where he lost me..Thank you so much 😊👌
@OvisAriesFarm
@OvisAriesFarm Год назад
@@michaelcard9382 he’s not using ribbon wire at all. It’s round wire wrapping in this build. If you use ribbon wire to wrap like an alien-style it’s called “tsuka”.
@335bullrider
@335bullrider 5 лет назад
Im gonna have to try this one
@LuvThaHustle508
@LuvThaHustle508 4 года назад
Still watching your videos brother!
@herbwilliams4515
@herbwilliams4515 6 лет назад
Always amazing tutorials Kenny!
@SherlockHohms
@SherlockHohms 6 лет назад
thanks herb!
@lilmanop
@lilmanop 6 лет назад
I want to nail the no stretch I have regular aliens down and did before I bought patinos alien makers which help tremendously for the prefect tension and making aliens at drills full speed without stopping
@tetnacious
@tetnacious 6 лет назад
Beautiful
@PawgSlayer
@PawgSlayer 6 лет назад
Alot of great info in this vid. Thanks 4 sharing
@MattyWill1
@MattyWill1 6 лет назад
Great video man!!✌
@SherlockHohms
@SherlockHohms 6 лет назад
thanks matt!
@michaelskyrme4229
@michaelskyrme4229 6 лет назад
I’ve only ever used the no stretch method. Never seem to manage a descent pair though. But happy when it comes together. I have always wrap in the same direction. Might be why I don’t manage any good lengths. Thanks for the advice. Very helpful.
@uricacidcrystals9921
@uricacidcrystals9921 6 лет назад
Michael Skyrme you can’t wrap the same direction as the clapton dude
@SherlockHohms
@SherlockHohms 6 лет назад
thats definitely why
@Janet_Airlines802
@Janet_Airlines802 6 лет назад
What is the size of that barrel swivel with split rings?
@SherlockHohms
@SherlockHohms 6 лет назад
its a 800lb i think.
@Eddavids2
@Eddavids2 6 лет назад
My problem when I first started was getting the angle right I was not far enough my biggest advice would be to with a big angle when your first starting so you at least get a coil then as you learn you can get better with the angle
@SherlockHohms
@SherlockHohms 6 лет назад
FukLuck Ed hahaha dude I was throwing my drill. Aliens were a bitch for me
@Eddavids2
@Eddavids2 6 лет назад
Sherlock Hohms it took me three attempts before I got it good enough to get two coils out of 18 inches of wire I did get a coil out of my first 3 attempts maybe took me ten attempts to do a whole stick with no fuck ups now I can just go thru them, I do need better swivels I just build for me so I don't have to buy coils so I'm kinda cheap so the swivels I had were ok but need to invest in some better ones
@LittleD232
@LittleD232 6 лет назад
Hello there, I just want to think you for a great tutorial in how to build a Alien Fused Clapton here. Yes, I have subscribed to your channel too. I just want to say Thank you and please keep up the good content here too. Thanks, Darin.
@Rendyg27
@Rendyg27 6 лет назад
Thanks dude nice video
@producdevity
@producdevity Год назад
Could you tell me the swivels that you used here or that you are using right now if you switched
@nikosnikolis4331
@nikosnikolis4331 6 лет назад
Nice man ! Thank you !
@kengreenwood4521
@kengreenwood4521 6 лет назад
Thanks man...always enjoy your guides
@SherlockHohms
@SherlockHohms 6 лет назад
youre welcome!
@MrPeezySleezy
@MrPeezySleezy 6 лет назад
Liked before even watching the vid. You duh man, Sherl!
@SherlockHohms
@SherlockHohms 6 лет назад
thanks buddy!
@frankallen3634
@frankallen3634 Год назад
Always keep my build at higher ohms because there is nothing I hate more than hot vapes. Hot vapes on a mech makes bad liquids worse, and since 2010 I've found maybe 5 liquids I like
@markc4510
@markc4510 6 лет назад
Damn you make it look easy!
@BozzioRamadhan
@BozzioRamadhan 5 лет назад
So Nice & its work.. GBU
@bradthom7175
@bradthom7175 3 года назад
My man... Reppin the Penn St Santa Gear! Lol.
@jeffysoule2076
@jeffysoule2076 6 лет назад
Great channel man!
@SherlockHohms
@SherlockHohms 6 лет назад
thanks jeff!
@jeffysoule2076
@jeffysoule2076 6 лет назад
Sherlock Hohms the first video of yours that I watched was your review of the Bonza RDA. I bought one that day and haven't taken it off my mod since I got it!
@SherlockHohms
@SherlockHohms 6 лет назад
Jeff Soule that’s awesome man!
@breykruskie4678
@breykruskie4678 6 лет назад
Yeah I’m gonna try this out today when my 36g comes in the damn mail
@bama7263
@bama7263 5 лет назад
Nice video I would love to use them on an RTA
@kipod7419
@kipod7419 5 лет назад
Awesome video, here are a new subscriber
@chrisparks6537
@chrisparks6537 6 лет назад
Put a drop of crappy eliquid on your tension fingers, and rip your drill at full speed, sounds like terrible advice, but it works great for me
@SherlockHohms
@SherlockHohms 6 лет назад
Chris Parks you’re actually 100% correct. The motion and speed help with consistency
@klaytonvonkluge4905
@klaytonvonkluge4905 6 лет назад
I actually use a variation of this to space clapton ribbon stacks. It doesnt work flawless everytime unless I use 100% VG
@ryancairns2317
@ryancairns2317 6 лет назад
Chris Parks Wouldn't 100% pure VG make more sense? Obviously not if you don't have any lol. I suppose a high VG liquid you ain't going to vape is better than doing it dry.
@chrisparks6537
@chrisparks6537 6 лет назад
Yea vg works too if ur a diy. I just use shitty juice I'm not gonna vape ever. Works better than water because it doesn't evaporate as fast, and more surface tension one it
@wingsofsteel3246
@wingsofsteel3246 5 лет назад
@@chrisparks6537 ?
@LaffyGaffy69
@LaffyGaffy69 8 месяцев назад
What kind of cutters should i buy, i ordered some premade coils like this , what nrand of cutters should I get
@willboyles
@willboyles 6 лет назад
Love the hat by the way 🎅🏽🎅🏽🎅🏽🎅🏽 merry Christmas brother
@dogmeat1978
@dogmeat1978 6 лет назад
Thanks man, brilliant as always, merry christmas to u and ures
@SherlockHohms
@SherlockHohms 6 лет назад
Thanks buddy!! you too
@LoveStory-gz8kd
@LoveStory-gz8kd 6 лет назад
Thanks for the nice info's
@michaelcard9382
@michaelcard9382 2 года назад
So those 3 cores are already claptoned that u made with the 26 n 36? How do u choose which ribbon alien size wire to use? Are most ribbon alien the same gauge?
@scottbourke81
@scottbourke81 6 лет назад
what sort of build would you recommend for 24g kanthal and 31gage kanthal
@PapaGleb
@PapaGleb 6 лет назад
My biggest issue is the wire jumping when I Clapton but you wire is dead solid. What’s the trick?
@SherlockHohms
@SherlockHohms 6 лет назад
tension. keep the drill pulled tight and make sure everything is centered
@7snzain355
@7snzain355 6 лет назад
*_You got my sub bro great vid_* 👍🏻
@DTMbro
@DTMbro 6 лет назад
Biggest problem I have is getting that stretch just right. I'm definitely trying this method
@SherlockHohms
@SherlockHohms 6 лет назад
it might just be what you need
@another.places
@another.places 6 лет назад
Do you think there is an improvement of the flavor using this coil comparing to framed staple or multi-core x3 fused clapton? thank you for the video
@SherlockHohms
@SherlockHohms 6 лет назад
Ali A you’re welcome. Definitely, there is something about the alien pattern that amplifies flavor
@double_d_8885
@double_d_8885 5 лет назад
I was having the hardest time getting aliens down cause I had my swivels mounted to a flimsy make shift 2x4 post, once I mounted my swivels to a sturdy set up I got them down quickly
@SherlockHohms
@SherlockHohms 5 лет назад
Awesome. I bet that made a world of difference
@edenyakove2821
@edenyakove2821 Год назад
hi I wanted to ask where should I buy the wires and what brands?
@Washington_Marques
@Washington_Marques 3 года назад
Alien Coil 3*27/36 0.22Ω will fit in the Asgard mini rda?
@AlexandreBFK
@AlexandreBFK 3 года назад
The thing that made it "click" for me was when I realized not only how import the angle is, but also the speed… somehow, at higher rpm, I get a way more consistent result, maybe because it stretches the decore more consistently… Only after speeding up did I manage to get larger stretches of perfect alien wraps
@SherlockHohms
@SherlockHohms 3 года назад
Me too. The higher the speed the better groove I can get into
@jameskvarnstrom8155
@jameskvarnstrom8155 6 лет назад
As usual great vid . I see your still vapeing rice crispy treats. Got my package in the mail last week and been very satisfied with all of the e juices so far. Thanks again
@SherlockHohms
@SherlockHohms 6 лет назад
youre welcome james. ill vape crispy until i die or they stop making it
@thecoiltutoriales5238
@thecoiltutoriales5238 6 лет назад
Great vídeo thankU! Wich swivels you use?
@chriscollins9492
@chriscollins9492 6 лет назад
Subbed, Thanks Brother!
@charlesannable3041
@charlesannable3041 6 лет назад
just got into the vape world, enjoy your tutorials. I have built a couple wire clamps that fit into a 3/8" chuck, would you be interested in viewing one?
@SherlockHohms
@SherlockHohms 6 лет назад
charles annable that sounds interesting for sure
@face3223
@face3223 5 лет назад
charles annable I would like to view them please and thank you.
@bloodsvente2087
@bloodsvente2087 6 лет назад
Hi Sherlock, greetings from Germany. I have a big problem with the decore wire. He twisted extremely between the guiding hand and floor. It is really pain in the ass. I'm talking about stretching method and decore wire 38 Gauge and less.(40, 42 Gauge ) Core Wire 3x 29-33 Gauge. Sometimes Fraliens . Have you any Idea ? Please not the NO STRETCH METHOD. Sorry for my farmer english Kind regards Sven
@TopDawg-XXXL
@TopDawg-XXXL 6 лет назад
blood svente ich stehe genau vor dem selben problem. der manteldraht verknotet und verstrickt sich, während ich den kern füttere. fused claptons mit 42ga sind absolut kein thema aber bei diesen scheiss aliens wachsen mir bald noch weisse haare!
@bloodsvente2087
@bloodsvente2087 6 лет назад
Hi XXXL, schön das ich nicht der einzigste bin. Komisch nur das niemand das mal erwähnt von den coil- Mastern.
@bloodsvente2087
@bloodsvente2087 6 лет назад
Interesse an einer Lösung ?
@TopDawg-XXXL
@TopDawg-XXXL 6 лет назад
blood svente klaro, immer her damit. hab es ebe geschafft 4cm fehlerfrei hinzukriegen und dann hing der manteldraht an meiner jeans fest 😄
@bloodsvente2087
@bloodsvente2087 6 лет назад
Nimm Deinen gestrechten Manteldraht und Wickel ihn locker auf eine Leerspule auf. Ich hatte noch eine von Zivipf , die schwarzen. Dann tust Du die Spule in einen Zipper Beutel ( z.B. von Toppits , Größe 150ml, hat genau die richtige Größe für die Zivipf Spule , die kann sich dann im Beutel noch frei mit drehen) . Den zipper Beutel machst Du dann soweit zu das die Rolle nicht raus kann. Der Draht muß natürlich raus und an Deine Seelen befestigen.Das ganze läßt Du dann zw.den Beinen auf dem Fußboden liegen. Das ganze , mit oben genannten Materialen ist schwer genug um den Draht nach unten hin gerade zu halten . Aber auch nicht zu schwer das es Dir Deinen Strech versaut, wenn der Beutel mal ein paar cm vom Boden abhebt bevor die Rolle wieder Draht nachgibt. Zumindest bei 0.1er . Habt gerade getestet und hat super geklappt. Nicht einmal verknotet. Falls Du noch Fragen hast, send mir Deine email und ich schick Dir nen Foto davon.
@BigRed1500LC
@BigRed1500LC 6 лет назад
Here is a silly question! Which end of the decore do you start with? The end with the 1 inch tag or the start of the decore closest to the drill when you wrapped it?
@darrellbrown0000
@darrellbrown0000 5 лет назад
Awsome tutorial but can i kmow what device you were firing and wicking you coils on, like not the rda but the ohm actual device it was screwd into? i really want one. Thanks
@satan21695
@satan21695 5 лет назад
I find claptoning an under stretch wire vertically(around 80 degrees from your body) instead of horizontally works better and easier
@1sickolas
@1sickolas 6 лет назад
When you're wrapping your decore does it matter what end you start with? Meaning are you starting with the end you left the tail on in the drill? Hope this makes sense
@SherlockHohms
@SherlockHohms 6 лет назад
Nick Nitchoff it doesn’t matter which end you use. The wrap will be the same direction
@face3223
@face3223 5 лет назад
Sherlock Hohms I was worried about that one myself and started all over. But now I know better. Without you and all the other awesome builders I would be so lost! You guys are so awesome and giving with the knowledge that you all bestow upon us. I myself am truly grateful. I knew here. (2 building) but you guys teach us beginners the coil gospels like we are all equals. You guys kick so much a$$!
@constantObserver
@constantObserver 6 лет назад
So for the no stretch you stretch a small section, wrap around the part sticking out of the chuck and the tension on the decore from your fingers will wrap itself? So keep applying tension until the wraps align?
@deanodoinit20
@deanodoinit20 6 лет назад
Awesome mate!!! Aliens have been kicking my A$$ & that was quite in-depth for a short vid......Luvd it! All the best for the festive season cheers!
@SherlockHohms
@SherlockHohms 6 лет назад
Thanks buddy... you too
@andreasparaskeva1360
@andreasparaskeva1360 4 года назад
hi can you tell me where did u buy your swivel from?
@psykobuilds
@psykobuilds 6 лет назад
I can do no stretch for dual core 24 aliens but for 3 x 26 cores i usually way understretch a bit so i can put less tension on the wire. I use lego for support. Ill need to try paperclips
@bykurt_is
@bykurt_is Месяц назад
9:18 - this song is getting stuck in my head in an annoying yet satisfying way.
@muhammadfiqih6929
@muhammadfiqih6929 6 лет назад
So there is special kind of wire that form like zigzag? What does it called? I am new btw, and most of what you saying is out of my vocab, but thanks for opening a new world for me.
@coreyylitalo4405
@coreyylitalo4405 6 лет назад
Another great video Sherlock! Keep it up man you’re killing it
@TAEbot
@TAEbot 6 лет назад
Damn, you make it look so easy... Beautiful!
@SherlockHohms
@SherlockHohms 6 лет назад
thanks jump!
@simplyworldwidevaping8184
@simplyworldwidevaping8184 6 лет назад
i counted how many times you blinked in this man and tbh its scarrin me btw 457 times
@SherlockHohms
@SherlockHohms 6 лет назад
SimplyWorldWideVaping then don’t watch
@juliourbano4465
@juliourbano4465 5 лет назад
Damn someone have time to do that.. bruhhh..
@kjhartneck7490
@kjhartneck7490 5 лет назад
Julio Urbano right?😂😂I wish some people would spend as much time doing worthless shit like that doing actual builds and trying to help this dying breed
@DeadeyeDgen
@DeadeyeDgen 4 года назад
What swivels do you recommend and how many do use
@hilham89
@hilham89 5 лет назад
I need to do a good swivel setup because every time I free hand it i get a twist and it sucks.
@JustinMentionedIt
@JustinMentionedIt 6 лет назад
So you used kanthal 32 wire for Clapton and 26 g stainless for cores ?
@samfinton6614
@samfinton6614 2 года назад
What rda are you using?
@NoJoeThatsNotYou
@NoJoeThatsNotYou 4 года назад
Noticed that Texas juice
@62emare
@62emare 5 лет назад
Great video, just one thing: put in the description the details of the wire you use, it's kinda difficutl for non-english speaker get the wire dimensions from the video, thanks
@SherlockHohms
@SherlockHohms 5 лет назад
Great idea. Thanks. I'll do that In future videos
@daniellebordeau606
@daniellebordeau606 6 лет назад
How do u put that lip or l bend in ur coils? ..i wrap my own from wire i buy and i have the engine 2 which leads need to be at same height so they need that perfect bend!
@settrigh8310
@settrigh8310 4 года назад
hello can an alien coil be used for series mode? im using 3mm guide how many loops should i use? thank you for answer
@duderock5648
@duderock5648 Год назад
What would you say are best coils for flavor i use a hellvape single deck rda and a rebirth rta tank
@SherlockHohms
@SherlockHohms Год назад
You can't beat a 3core stainless alien. 24/26 x 36/38/40
Далее
Alien Framed Staple Coil Build Tutorial
10:55
Просмотров 60 тыс.
No Stretch Fralien Build Tutorial
33:39
Просмотров 24 тыс.
Multicore Staggered Fused Clapton Tutorial
17:27
Просмотров 497 тыс.
Fused Clapton Coils Explained: How to spot Good vs Bad
16:02
A Guide To Prebuilt Vape Coils
4:10
Просмотров 91 тыс.
Alien coil
12:53
Просмотров 5 тыс.
Episode Nine: The Micro-Clapton Zipper
17:39
Просмотров 633 тыс.
Alien Coil Build Tutorial
26:00
Просмотров 456 тыс.