An Inexpensive Way To Bore & Stroke Our Cheap Jeep Cherokee's 4-Liter Straight-Six - Trucks! S11, E2

Подписаться 1,6 млн

Просмотров 554 тыс.

50% 1

Cheep Cherokee returns and we do our first ever 4-wheel drive chassis dyno test to see what kind of power our stock 6 cylinder makes. Then, we'll show an inexpensive way to bore and stroke the engine to get more power out of Jeep's 4-liter straight-six.
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
Bushwacker: Five inch "Cutout" flares for '84-'96 Jeep XJ two door models.
More Info: pntv.us/pb_pt_6697
Dynojet Research: Chassis Dyno.
Magnaflux: Spotcheck Dye Penetrant And Solvent Developer
Quadratec: Skyjacker three inch value flex lift system with front coil springs, Nitro shocks and rear leaf spring replacements, & polyurethane one inch spacers.
Royal Purple: Royal Purple Superior Protection Extended Life oil filter.
Torchmate CNC Cutting Systems: Torchmate 2, 4ft. x 4ft. light industrial table, Thermal Dynamics Cutmaster A120 and Torchmate New Automated Plate Marking Attachment.

Авто/Мото

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 311

@Elver_Galarga_jugo 3 года назад

The fact that they didn't name it "Cheep Jerokee" is the biggest missed opportunity of all time

@jeffruebens8355 3 года назад

Gyp Chunky-key or Wrongler.

@Raynedog00 3 года назад

@@jeffruebens8355 I like Wrongler lmao

@krebgurfson5732 3 года назад

nah, cheep cherokee is fine

@Stargate971 3 года назад

I used to love eating my breakfast on Sat mornings while watching these guys on Spike back in high school. I had my bright red 97 XJ back then too. I learned so much about how to work on cars with that one! Good times.

@jameswilliam3792 3 года назад

Same!

@captaintom9521 3 года назад

I've got a Red 98, going for head gasket in the am

@Rich77UK 3 года назад

These 6 cyl motors are fantastic. Not rocket ship power but wonderful torque and drivability. My old chap had a 4.6V8 P38 Range Rover and a 4.0 grand Cherokee (both 97 models) some years ago. The jeep trounced the rangey everywhere and in every way.

@seanmckay3392 2 года назад

Straight 6

@omegarugal9283 3 года назад

that engine was almost dead and still made it home

@electronicsworkbench 3 года назад

A testament to AMC's best engine they ever made.

@electronicsworkbench 3 года назад

@John Wymer the V8's had so much potential when Breedlove and Donahue were racing. Just didn't roll out onto the street after 1970 and smog controls.

@CubanVJ 3 года назад

I drove a smoking over heating 4.0L to the recycle. Block was cracked so no saving it. 320k+ miles

@jurj97 3 года назад

Why is this presented like an early 2000s SpikeTV show

@darnit911 3 года назад

Because it literally is a 2000's spike tv show lol

@Torrious 3 года назад

I like it and hope it stays this way

@drishy94303 3 года назад

I kinda like it

@ThmsPtrsn 3 года назад

Thats why^

@justinmccourt14 3 года назад

jurj pretty sure this show is older then all the people who relied to your comment

@TheDude_Abides_ 3 года назад

I love seeing old jeeps brought back to life. Makes me so happy.

@hoppygoodness 3 года назад

This is exactly what I've been looking for. Can't wait for part 2.

@SSDracerSD 3 года назад

Those engines were so good they just had to stop making them

@immelting9834 2 года назад

I was hoping for jeep to put 2 together for a nice 12 cylinder motor. Sadly that never happened

@JorgeRodriguez-po7kx 2 года назад

Definitely 😁 specially The 4.2 Liter because I don't like the 4.0

@prevost8686 2 года назад

Not quite. The tooling was so freaking worn out that QC on the blocks was horrendous and the emissions would never meet stricter standards. Very similar to the end run of the Ford 300 six. Having said that both were wonderfully simple torquey engines whose replacements were garbage. The 300 six was the best gas engine Ford ever made and the 4.0 mated the Aisin transmission really gave Jeep a good reputation for reliability.

@lightsout176 Год назад

@@prevost8686 probably an exception, but my tranny has 250k miles on it. Reverse made a loud hum noise last night for the first time. But I think most people are just horrible drivers more than it being a poor tranny. Almost everyone I ride with drives like their trying to break something.

@timothykeith1367 7 месяцев назад

@prevost8686 Some of the AMC 6 tooling dated to 1964

@kwhp1507 3 года назад

And this is what happened to your guys last 4.0 stroker about a decade ago. You started it and the. Promised a follow up on the dyno to show how much was gained, and it never aired.

@makingtechsense126 3 года назад

Noticing the copyright notice at the end of the video... 2009. This was from a decade ago. This video appears to be "Cheep Cherokee Part 5". Part 6 and 7 appear to go over re-building the engine. Hopefully these episodes make it to RU-vid soon.

@binilr57 3 года назад

This show brings back that early 20s tv show experience... Thank you

@LuciFeric137 3 года назад

Great show . Love the detail and inspection/diagnosis work. Every engine tells a story.

@jackmazza5742 11 месяцев назад

The XJ was the platform that taught me to work on trucks. I’ve owned 4, and still have an incredible amount of love for them. Reliable and comfortable to drive. I wouldn’t recommend them for anyone taller than 6’1”

@schawnfleites1555 3 года назад

I feel like a kid again with this channel. Love it

@williamschuman4951 3 года назад

Always good stuff from you guys

@johnreddick413 3 года назад

Man i wish i could find the next part of this

@michaelwelch7238 3 года назад

Love this series!!!

@revolutionday1 3 года назад

I just rescued a Grand Cherokee (WJ) with this engine, so this is right on time for me!

@KPearce57 3 года назад

67 Dart slant 6 Bored and stroked used for ET drag racing, would give a lot of V-8s a run for the money, as long as I shifted at 6500 it would ET within 1/10 of a second very time .

@LuciFeric137 3 года назад

Neat. Grandma had a Dart with a slant six and three on the tree...! The older I get the more I miss those old inline 6 motors..

@reddyuda 3 года назад

My XJ doesn't make that much power but that's what low range is for 💪 300k miles and solid compression and oil pressure. Think it will go to 500k no problems, trailered a 4000lb trailer at 70mph from Colorado to South Florida with 35's and AC blasting the whole way

@captaintom9521 3 года назад

315 on my XJ. 98

@SnowflakeCharles 2 года назад

317 on my ‘91 XJ. 👍🏼

@aired-downdisconnected4125 7 месяцев назад

4,000lb trailer at 70mph. I highly doubt that .

@ryanburke6158 3 дня назад

93 ZJ here. 318,902on the clock and running fairly strong . Use 4x4 all the time out in BLM no problems

@diamonddave4182 3 года назад

🤔 try a dyno run with stock tires

@SamSheepDoq 3 года назад

It would probably make closer to 100-110 whp if it wasn’t for those large wheels and tires, but they also don’t drive it on stock tires so I guess there’s that.

@Hc-rt6pe 3 года назад

The Black Sheep with it re geared on 33s and a header mine gets 210 hp

@bmstylee 3 года назад

It wouldn't make a difference. You clearly didn't watch the episode.

@diamonddave4182 3 года назад

@@bmstylee 🤔🤔🤔 get blocked

@kx454 3 года назад

Gearing does not matter on a dyno....Heavier tires may hurt a little.

@danielstoscup755 3 года назад

Excellent visuals

@wbushnaq 3 года назад

next week!!!! I can't wait!!!!!

@skeezix8156 3 года назад

I’ve used desenex foot spray to check for cracks for years. Spray on a nice even coat and walk away for an hour. It’s such a fine powder it will find a crack if it’s there.

@RepublicanJesusthe2nd 3 года назад

Two videos in one,great.

@BarnStangz 3 года назад

Glad to see my Toyota pickup isn't the only underpowered junk out there...

@tatted_jackazz9684 3 года назад

Mine is a 97 with 4.0 with 274 miles still running good just doesn't like long hills

@sebastianjacob1374 3 года назад

Superb ❤️

@indyrock8148 3 года назад

I'm glad they showed how to use dye pen crack checker. I use it on cranks. They should have disassembled the head first though.

@carlwarren1376 3 года назад

Magna flux is slot better

@k9man163 3 года назад

These guys are like insanely good at acting and being on camera.

@Kuhladestkyicky 3 года назад

I am only watching this on Sunday,Sunday,Sunday.

@JasonTheMunicipalMechanic 3 года назад

How would you have any oil pressure with a rod that loose? Were there any bearings in there?

@Battle_Garage 3 года назад

thats the most well written marker board ever haha

@rogerj412 3 года назад

The person they used for the the marker board cost Spike so much money they had to run over 15 minutes of ads each episode.

@cesarprieto8279 3 года назад

Do you use the same fuel injection system or do you have to use a carburetor? Are there modifications that need to be done to the fuel delivery system after the engine is stroked?

@WestleyBates 3 года назад

13:02 what are they doing staring at the ark like that lol

@ericarg 3 года назад

Tire warmed causing the air to expand. Could explain power loss due to mechanical disadvantage...and motor dying haha

@Miftr6 3 года назад

Just in time, I'm doing a cheap Cherokee stroker build on my 00 XJ. So I will follow this build closely

@fre0nx675 3 года назад

Change the head. They crack 00,01

@ruby20003628 3 года назад

Was thinking about rebuilding at 4.9L inline 6 Ford engine to get it ready for turbo charging

@tomashton1781 3 года назад

Ive broken top rings, when the bearings are loose they smack the ridge in the cylinder bore Honda use,s barrel faced rings,they dont leave a nasty ridge on the top of the bore, if your gonna stroke it and go cheap look for the cross hatch and measure the bores,doing it the cheap way will bite your ass every time new pistons like fresh bores, and the block is up to spec

@timothyfoeks6446 3 года назад

4.0l straight 6 engines are good motors !!!!

@mamatronic963 3 года назад

Please share a link for the 70 dollar paint j0b!!

@evankimbel1930 3 года назад

I don’t understand. Do the Dino with stock sized tires and that will get you a accurate reading on the Dino.. and the 4.0l is rated at 190 hp and a little more depending on the year on the engine. And try installing a lower gears on the differential to get back to factory power with the tire size and a lower geared transfer case for off-road since it doesent have enough “power”

@nathanwood3679 3 года назад

When he asked if it was in 4wd, did you see the front wheels moving? No. That's a stupid questions

@SoCalTrooper 3 года назад

If you're going to point out someone being stupid, at least spell it correctly.

@johnclary729 3 года назад

If the crankpin was offset 3.90" your stroke would be 7.8". I think the stroke was 3.90" and the offset was 1.95".

@mpetersen6 3 года назад

You caught that too. I have to wonder about the math skills these guys have.

@RIPPERTON 3 года назад

@@mpetersen6 Maths is easy, Logic is hard.

@mpetersen6 3 года назад

@@RIPPERTON Math is the ultimate in logic

@michaeledwards8051 3 года назад

Is it possible or can I suggest a 300ci/4.9L I-6 in a 2nd gen Ford Explorer? I see the Ex's on Cr'list $500-$1000 and 4.9's for few hundred. How to: strip an Explorer for 1bbl, no a/c, stripped n simple 300 on the cheap build

@thomasgreen1557 3 года назад

I would of loved to see that 4.0 get cleaned

@user-un1sh8xh5v 3 года назад

nice!

@mrjeep881 3 года назад

V8 swap is not hard on a xj I have done a few in the yard using the Dodge 5.2 Magnum engine cost was around $700 counting cost of the engine

@Project-gr6zy 3 года назад

Do a turbo ford 300 it'll out torque any v8 of the same displacement and some bigger ones too and be reliable as gravity doing it

@fun2916 3 года назад

Wish they would bring this show back

@kenskens69 3 года назад

nice from what 4.0 engine is that head

@Hooch802 3 года назад

I like how they make them say things for tv.... was that in 2 or 4..... idk I think he could tell if all 4 where turning

@dorsk84 3 года назад

I would still love to see you do a build on a "newer" 4.0. And address the issues with and solutions for getting them a power boost.

@J-W.- 3 года назад

Yeah the newer ones had so many problems (more then older) right when they gave it all the emissions stuff. Cracked heads alot

@fre0nx675 3 года назад

98-99 are the most sought after Cherokees. 00,01 had the weak casting head 0331 or something like that. Would crack around 120000

@electronicsworkbench 3 года назад

@@fre0nx675 Pretty much correct. The 0331 head also had smaller exhaust ports. Could not open them up since the casting was so thin. You could go a tad wider but not taller. Due to that, even a turbo won't do much to improve a hole that can't flow any more than it could. This is why the 7120 ('91-95) and 0630 ('96-99) heads are the most desirable. They will bolt on to the '00-01 blocks. 7120 only lacks the Siamese exhaust port for 3 and 4 as well as the locating dowels. Slightly different shape to the intake port which seems to be the most re-engineered part of the heads over the 5 million 4.0L engines that were produced. www.enginebuildermag.com/2004/10/not-those-jeeps-again-the-facts-about-4-0l-cylinder-heads/

@wilymcgee 3 года назад

where's the rest...?

@electronicsworkbench 3 года назад

This episode has an air date of 2009. Basically a teaser to get you to subscribe to PowerNation.

@Timmayytoo 3 года назад

I was thinking of doing this exact thing on a Cherokee. Those engines are pretty sensitive to regular oil changes. I’ve seen a car with about 30K miles need a new engine cuz the dude never changed the oil, just added it when it got low.

@kenjohnson5498 3 года назад

yes maintenance is a must, but if you practice every 3k on oil changes my neighbor sold two he owned as daily drivers with 500k + on each engine. kind of made me change my oil changing habits as a young man lol.

@daffstore890 3 года назад

Hello i m indonesia🖐 good projet

@georgesantiago6005 3 года назад

Cool

@elmerfudpucker3204 3 года назад

You can get nice stroker kits from any of the major performance parts centers for these. They have budget kits all the way to full race. Just making a stock 4.2 liter is wasting the same money you would pay for a better, bigger kit.

@jamesford2942 3 года назад

At 9:00 the stroke is not the length between centers but double that length. I am pretty sure that a 4.0 doesn't have a 6.88" stroke and a 258 a nearly 8" stroke. LOL Kevin stepped in it and the crew and editors didn't catch it.

@h2oskiaddict 3 года назад

Next week... aaaauuugggg!

@kennethricher45 Год назад

That rough startup sound is normal if you ask me. The 4.0 is a grumpy starter that’s all

@fatjaysgarage Год назад

Where can the specs be found for the engine? Does a haynes manual give specs for backlash and other internall engine stuff?

@voidisyinyangvoidisyinyang885 Год назад

why is this straight six so much weaker than the Vortec 4200 in the TrailBlazer? 275 HP

@1stzjtruck706 3 года назад

Rebuilding my 4.0 for the same reason but on mine the the connecting rod bolt broke

@johndorflinger2344 3 года назад

I bet you had to re weld the driver's seat, they're notorious for breaking while wheeling.

@macmcwhorter25 3 года назад

Ring and pinion is the best option when going bigger tires...

@GODIsTopG88 3 года назад

macmcwhorter25 *rack and pinion*

@macmcwhorter25 3 года назад

@@GODIsTopG88 what are you talking about? 😆 no rack on a Cherokee. Obviously not a car guy... If you dont know what ring and pinions are...

@numbnutz9398 2 года назад

@@macmcwhorter25 I guess Jeremiah was too busy going to buy headlight fluid to answer back😄

@x-raytechtube4223 3 года назад

Wouldn't it be bad to have dirt/mid potentially fall into the dyno?

@RobertBreckenridge13 3 года назад

"Cheap" they said... *upgrades CNC Plasma cutter table with a unit worth more than the entire build*

@burleism5158 4 месяца назад

Only a Moe would call that rig a "grocery getter" 1:43

@kenjohnson5498 3 года назад

To me a brand new head should already come with the deck ready to go. I guess you learn something new all the time.

@kenjohnson5498 3 года назад

@Pop's Garage Mayhem Missed that part thank you.

@jeffrey4547 3 года назад

i build on a budget i built a 68 pu with a stroke 454 tunnel ram heavy duty 400 turbo 12 bolt posse all that is left to do is the final paint and the interior so far i have only 2300 in the truck

@seekingtko3146 3 года назад

bearings are toast

@jasonbodi503 3 года назад

Did you guys bother regearing for the tires? Did the 8.8 swap have 4.10 gears in it and Limited Slip? Did you match the front to a 4.10? My 92 has 33s and it makes way more power than that test and I haven't even regeared yet

@numbnutz9398 3 года назад

In a previous video they said the 8.8 had 4.10s and they rebuilt the Dana 30 with 4.10 and a locker and axles from a Grand Cherokee.

@Azzurra2k 3 года назад

These 4.0L Heads are known for being reliable Laughs in 0331 head casting

@bulkchart3239 3 года назад

did the new engine ever get dyno'd?

@tomashton1781 3 года назад

my 90 wrangler yj 4 banger makes 90 plus,with 360 gears

@1000186ful 3 года назад

I had one these jeeps the 4.0 sucked compared to the 4.2 in my 79 jeep j10

@schwanzmunster2503 3 года назад

Huge fan of this project. I have always wanted an XJ but I am too tall to fit in one comfortably. Plus when I sit in the seat my shoulder is outside the door lol.

@tyler7644 2 года назад

How many miles?

@blueoval250 3 года назад

Carbide bur and a harbor freight welder?

@jaredmartin3798 3 года назад

I wonder how much power it made

@DooberD33 2 года назад

He said is that 2 or 4 wheel 😂😂😂😂 you had to ask? You’re sitting right Infront of it

@mpetersen6 3 года назад

Really, you guys can't even explain the relationship ship of the Crankpin to the centerline of the crankshaft. Using your explanation the stroker would wind up with almost 8 inches of stroke. Pretty impressive for a block that's about 9" from the crank centerline to the head face. Stroke is determined by the off set of the pin to the crankshaft centerline. And in case your interested the first strokers were actually built by AMC power train engineers during the mid to late 80s.

@DasZaku 3 года назад

mopowah baby

@mtndewman1022 3 года назад

16:13 ughhhh 0331 would like to speak with you sir

@grad0n 3 года назад

You can keep your 0331(especially the non-TUPY ones).

@staudenmaierca 3 года назад

@@grad0n I just replaced my 0331 with a 0630 in my 2000 XJ.

@grad0n 3 года назад

Chuck Staudenmaier I put about 25 hours into porting and polishing the 0630 that was in my stroker. These vids have shown that an Edelbrock alu head out the box flows as good as a ported 0630&7120. Newcomer’s worked-over Edelbrock flow numbers obviously are amazing.

@brianpardee1281 3 года назад

Can see the coolant bottle bubbling that thing was super hurt

@brianellman 3 года назад

I had a 235 straight six in my 66 Chevy. had a Clifford research header on it. with a one barrel carburetor. it took a lot of abuse. the header was torture in the winters. !!

@MrMitokiller 3 года назад

why?

@brianellman 3 года назад

MrMitokiller Because the exhaust manifold was connected to intake. after I but the header on it lost all that heat.

@sihartobing9570 3 года назад

Your Cars Engineering & Body Repair Very Gorgeous No Confuse For It : The Power Nation* - Repairing Jeep Engine & Body Repair, Best Workshop Studio Show : Bigolive Show By - Power Nation* ...... Cheerio Bro.

@johndough7160 3 года назад

This 4.0 is the best six cylinder I have ever had. My friend took all the smog shit off and now I scream up hills. I took the entire interior out too. I can't wait to do me a stroker. I love this motor!!!!!!

@ericfrontczak8016 Год назад

What year

@xmo552 3 года назад

I want my 4.0 to die so I can do a stroker or engine swap. Well..... she won't die. I'm at 250k+ and runs like a top. I've heavily looked at a 4.0L based stroker and I would LOVE to keep the inline in there. But... When looking at ease, parts availability, driveability, hp, tq, mpg, smog-ability .... that fugly LS is looking pretty damn perfect.

@seanmckay3392 2 года назад

Still using windows xp on the dynamic in 2020 lol

@ScorpioKing95 3 года назад

Dyno result seem accurate, 4L are super reliable and bullet proof but they are slow and weak

@jimtermeer 3 года назад

baby plasma cutter

@alexandernotchappleseed9965 3 года назад

Dont get why Chrysler didnt put super slant 6's in them?

@pettersaethre 2 года назад

duke nukem retired into narrating

@isaacharvey523 3 года назад

If you want more views i would recommend making the playlist more intuitive to search to or keep relevant follow up videos close and timely. I was disappointed to realize that there was no follow up to this video. If there is I can not find it.