Another Dream Trailer! 28' Hydraulic Jack & Power Dovetail Trailer! Truck & Trailer Tuesday! 

Congratulations on the new trailer, It looks like a fine piece of equipment. It's nice to see all your hard work is allowing you to expand your equipment which will in turn give you the ability to do more projects for folks which will result in more videos, more views, and more growth for the channel which of course will allow for more equipment to be added which will enable more projects... Its a wonderful vicious cycle.

Really nice trailer. I love that beaver tail. I get tired of flipping my heavy ramps over. Those twin hydraulic jacks are nice too!

A powered dovetail is so nice! It will save your health in the long run. I wore my back out manhandling those heavy ramps for years. Now I’m bolted together with titanium rods and screws. Your back salutes you sir!

Tim, Congrats on the new trailer. I have a landscape company and haul heavy equipment daily. I would honestly contact the DOT officer again and get some clarification. I have been to many checkpoints and watched them give large fines for what you are talking about. You are correct that you need to stay under the 26,001LB weight to stay away from CDL and DOT numbers. However, you are over loading the trailer if you load how you plan too. You need to stay within the weight limits of the trailer. If the trailer has a GVWR of 14,500 and weights 5,360lbs you only have 9,140 lbs of payload weight you an put on that trailer. Just because you can "shift" some of the weight to the truck does NOT count. You will be under CDL and DOT weights, but you WILL get a ticket for an over loaded trailer. They will look at the GVWR on the trailer and then how much each item weighs on the trailer. Just a friendly heads up that there might have been some miscommunication with the DOT officer. We haul and drive this equipment daily. Good Luck!!

Fantastic presentation of a great product. I didn't really know what I was looking for when I bought my car hauler. It suits me pretty well, but I have found a few shortcomings. Your new deck-over checks ALL the boxes. Looks like a purchase you will not regret. Like they say, buy once, cry once...

Those BWise trailers are very appealing. They look great and seem to have all the best features.

Add a winch! That would make that nice trailer even more versatile! You never know when you need to haul a broke down (knock on wood) piece of equipment.

congrats on finding bwise, welcome to the good stuff that comes out of pa

Really nice trailer, Christy and Tim. I like the dovetail ramps that wider. Have a fine week. Enjoyed a full watch.

Congratulations Tim, you did great buying it! You might consider changing your name to Equipment Time with Tim. Thanks Christy for the new trailer! 😀

Lots of luck guys! Looks awesome! Why wouldn’t you need another trailer ??? That’s the question.

Glad to get a trailer like this! Love your family's good humor and your honoring God! Thanks for super-fun videos.

Great video. I appreciate all the thought and detail you provide.

These BWise trailers are awesome. I have a BriMar dump trailer that I purchased in 2003 because I was seeing that if I was going to continue heating my house with wood I needed to get some hydraulics involved as my son was going to be off to college in a few years besides the fact that unloading wood from a non dumping trailer is as much work as loading. I have been using a carryall 3pt attachment on my Kubota BX2200 to load logs into my trailer (unfortunately at the time I purchased my tractor I didn't get a bucket mainly due to having nowhere to store it when not being used). But as I'm getting order I think I'm going to need some hydraulics for both the front jack & tail gate. Thanks for showing these products. The guidance for tie downs has been valuable.

Beauty trailer.

Nice trailer! The power dovetail is a great feature! The cargo buckles are handy!

Nice trailer tim and kristie and now you can move everything ,good choice 👍👍

Another good video Tim, Congratulations on the new trailer.

It’s always a very pleasant and relaxing experience watching your videos

Another awesome video .. Thanks Tim and Christy ...

Hey thanks for the breakdown on the truck and trailer weights (best on youtube)! I had to go back and watch your series with trooper hoover to confirm a few things as I'm planning to buy some new equipment soon. Thank you for all the quality content ! Strong work!

That is a NICE trailer Tim! Congratulations!

Very nice looking trailer. Looks like a wise investment for you guys with all the work you do.

Beautiful new 'lil red wagon' Tim and Christy!

The finish on the new trailer is extremely nice! Great looking unit👍

Seeing the way you two love each other is a great early birthday present from y'all to me

Yay I've been waiting for this video thank you guys so much for all your time you put into making videos I really enjoyed them God bless

Very nice trailer!

Thinking ya's have a very nice trailer for your operations... thumbs up!

Tim I really enjoyed this thanks and what a great trailer!

The trailer appears to be high quality. I would love to own one myself.

Great video as usual. Very helpful as we will need a trailor eventually.

Hi Tim and Christy that is a very nice trailer i wish you the best of luck with it

Nice Trailer Tim now you can definitely get some work done

That’s a very nice trailer!

Congratulations on the new trailer, that was an awesome purchase. As other have stated your you tube page has come a long ways, certainly enjoyed all of them and great work.

Love the new trailer

Exceptional trailer. I believe with the expansion of TTWT you will keep the green dump. Good luck

nice set up Tim that's the way to go

What u gotta remember is that these guys look at every notification they get and respond to every comment and like every comment, on new and even year old videos, and with how many people are subscribed it must be a hard job, thanks ttwt

TimRun your chain through the stack pocket and back to the top of the stack pocket. It will not come loose if you hit bumps or load shifting. I've been pulling equipment for years and this little detail will save you in the long run. Also make sure you grease the pivot pins in your dovetail, also make sure your electrical wiring stays protected as your trailer gets some miles on it.

Having hydro or electric jacks are so awesome

Really nice trailer i like the design of all gooseneck trailers

Great looking trailer

Once again a superb and informative video. Having been watching your videos from the beginning, I must say that you have definitely come a long way!!

Super glue a magnet on the back of the controller. That way it'll stay wherever you put it.

That is a pretty sweet trailer!!

Your business sure has come a long way since I first subscribed.

I love how your able to stay right under cdl . Our equipment is just over the threshold and it's a pain .

Great review. Well done.

You have awesome tools/toys

I loved all yhe trooper Hoover videos and learned quite a bit. 👍🏽🙂

Just order my isotunes will be getting them in 2 days can't wait to use them with the tractor!

Great job enjoyed that!!!!

Nice set up real nice

great vid , love you two

Nice trailer!!! Hope to see it in action soon. You keep buying equipment your sheds not going to be big enough LOL

GREAT Video!!

Great trailer! So happy to see you guys doing good!

Nice trailer Tim!

Great video guys

Nice trailer. Love the channel. I just purchased a 25' goose trailer. 20' deck, 5' dovetail with flip over monster ramps. I loaded by 4052r with an MX6 mower and it takes the entire trailer.

Wow glad to see y’all doing well. This channel sure has grown since I first started flowing y’all congratulations on the new trailer maybe in five years we will be seeing a semi trailer flatbed 😆 👍👍👍👍👍

adding pipe spools in between stake pockets also add more securement places

I love my 36' diamond c 12 ton with hyd dovetail and Jack's along with wireless remote. Best money I've spent

Nice!!

Great video

Great video!

Beautiful Trailer! Your a blessed man...not sure what my “Finance” partner would say🤔😎

In the past couple weeks, the PA State Police DOT cop has had dually pickups pulled over that were carrying custom food trailers over for inspection. The trailers are enclosed and with a stainless steel ventilator on top, so I assume they are food prep trailers that might go around to local fairs and what not. They are really cracking down on commercial trucking here in PA. So, many wrecks on the Interstate recently. Be safe out there on the highway. BTW, your trailer ramp reminds me of the USAF C-5 Galaxy cargo plane that I road in while in the Air Force. It looks very well engineered.

Great video well explained 👍❤👍

Great video and trailer. Would love to see a video on how you tie down all your loads and what to use for each application.

Great video again. Nice trailer. Jdmich

Tim I love b-wise there nice

Time to hire a staff to run all that equipment! :)

It's a nice trailer and your right trailers are high priced

Awesome trailer! Wish I had one like it. Looks like its time for another truck, a green colour to be attached to the green dump trailer. See if you can get that one by the boss lady? haha

Darn it. I bought my b wise gooseneck dump after you video at the show, was actually hoping to see mine being built while you were on the factory tour. I love it but have ran into the same issue with space. It's a pain to take my bobcat, grapple, bucket and anything else. Even my bx24 with loader and brush hog is longer than 18'. I've been looking for a 14k gooseneck because of the gvw on my truck too, guess I have to put in another order with b wise too! Thanks for the review!

Tim my 32 foot (in total length) trailer with a five foot beaver tail has round rods to wrap chains around in between every stake pocket, those rods are welded to the rub rail and the trailer at either end

Good video like the trailer. I have a cdl it a pain but i need it for my job

Nice trailer. I would like to suggest that you wrap your chain around the stake pocket and back to the chain. Doing it that way you will have the full support of the welded pocket not just one side.

Tim, have you consider dropping the chain hook through the stake pocket, then attaching the hook to the top of the stake pocket? I find the hook is less likely to bounce loose rather than when the hook is attached to the chain. Gravity helps hold the chain hook in place. Nice looking trailer. I'm envious!

Hi Tim I purchased 4 stake bed inserts for My trailer from a local trailer/trailer supply company called Champion Trailers on Adamo dr in Tampa Florida. They were about $30 each, and they can be moved to any trailer pocket and have a really heavy duty large ring. Ken

Your handheld trailer controller needs a magnet on the back so it doesn't fall of all the time lol..

Nice

That Trailer sure is purdy..being able to haul 2 pieces of equipment and different tools should make your jobs go a lot better having what you need and not just getting by just like at neighbor Jimmy's video.

Put a solar panel on it to keep the battery charged. I put a magnet on the back of my remote so I can just stick it to the side of my trailer when needed.

I bought a Load Trail trailer with the hydraulic tail on it. I love it! Also, if you have the wiring set up correctly to the truck, it will charge the system on the trailer automatically when you plug it into the truck while traveling down the road. At least mine is that way...

What you should look into is wiring the aux power into the trl battery so you get a little bit of juice while driving to the sights you working at

Christy, try a tiltbed deckover. The first time is a little nerve wracking. But after several times it gets easy.

Tim the stake pockets gives you the ability to haul logs if you need to

You're not short Christy, just vertically challenged like Kat! Run for the shade Christy! I would too. Over 90 degrees and I say; "stick a fork in me, I'm done!"

Now that is one nice looking trailer. I agree that you need to stay under 26 000 lbs. Having to have a D.O.T. number is a real pain in the butt. I had one and I would get bills from states that I never traveled to. Annual fees. Ya right more like "Hey where is our cut of your action" fee. Good luck with the trailer guys. It will make life so much easier loading and unloading equipment.

He He I was thinking about cheeseburger then you say something about cheeseburgers 😀😀that made me laugh. Tim you should show this this trailer to trooper Hover and show the video to us

You could fabricate a short metal stake with a shackle on one end as anchor points for the strap.

nice gooseneck. fun fact the longer and bigger the trailer is the easier they are to back up and tow.its way easier to back a 53-foot trailer than a 4x8. the D.O.T bar came about cause too many ppl rear-ending trailers and removing their head. The D.O.T. bar does need to be a certain distance from the ground to hit regular vehicles in the grill area, instead of going under the trailer or even your big trucks like dumpsters trucks we call roll-off trucks need them too. if you will a rear bumper for vehicles who don't have them. one reason vehicle manufacturers needed to include the rear bumper in the sale of a pick-up truck I've been alive for 46 years and I know three ppl who got decapitated. and one was our math teachers husband p.s. I hope that ford has enough to pull that trailer. lol

You should wrap chain around the entire stake pocket instead of through the hole. It gives you twice the weld to hold load and distributes weight to all four corners of the pocket instead of two on one side. I used to drive for TMC flatbed and our security requirements was 1.5 times what DOT required.

love watching you guys! so much cool equipment, but I think if you get much more you are going to have to move to someplace larger :)

"Eat less cheeseburgers" says the finance committee... probably some very wise words, but heresy I tell ya, heresy !! - in all seriousness, love your videos and love how the Lord is leading, guiding and blessing you !!

Perfect! I'm ordering mine soon. Have you had it long enough to realize anything you would have configured differently? Did you pick this one up in PA or at a closer dealer?