Around The Corner - How Differential Steering Works (1937) 

Ah yes, only the essentials

WWII waist gunner video is awesome. You need to trail the target one to three sight grids depending on the angle of the incoming plane.

Hopefully the last skill is no longer needed.

This comment is GREATLY underrated

And if you want to learn how to capture japanese POW the Marines corp has just what you need here X) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_NHpSaa-UmE.html

You could easily animate the entire thing but I get your point

Not an animation!

Not even "Learn Engineering"

@@rambo-cambo3581 he was surely talking about the way it is shown: going from the simplest and slowly adding solutions to problems instead of looking at the thing in its full complexity. You could even do that without illustration if you explane it clearely

@@mhplayer i said I got his point

shows more about you than it does about school

Nit really. School is boring. RU-vid is not.​@@alexandazola374

​@@alexandazola374 not really at all, it shows exactly what the commenter is showing. You on the other hand....

​@@alexandazola374 that is disrespectful lol

@Revelation 13:4 6:04 - 6:36 "..in order to reduce the jerky action caused by wide spaces between the spokes we will have to add more spokes. Further filling in the spaces between the spokes gives steadier, continuous action, and changing the shape gives firm, continuous contact. Now we can make the gears thicker and stronger." It is correct however that they do not appear to address the "increased durability" statement. My _guess_ would be that a reduction to impact and increased contact between parts would mean that they would last longer (a lighter tap vs heavy thud) but I don't know enough about the mechanics of it to say for sure. Revelation 1:4

These are the people who actually lived in the era that these problems were solved, like the computer engineers of today, their minds lived and breathed these gears and stage a foundation for the modern world where we take them for granted. They were good people and it's a shame they are no longer here today to see the fruits of their efforts in all the cars we still drive.

absolutely, we understand the differential because we understand what it is used for.

i think the biggest part is the continuity of problem solving by engineers... when you see the problem and then solution, the problem is not that big afterwards

The space programs of the 50s-70s was mostly calculated by sliderules, those boys, and some women too were sharp. They were engineering students of life,physics, mechanical, chemical, metallurgical. No computers folks, in their minds,grappling with some heavy unknowns and they pulled it off. was a pleasure to be exposed to the last of them coming out of h.s.entering the workforce. Problem solving at an artform, the best education I could have gotten. Not so many specialists, some of them were amazingly versatile and wouldn't be stumped, not for long anyway. There stuff worked. I feel like a slouch now

true

@@__skillz the original vid is from 1937

It is so satisfying and well executed , im glad to not be pass next this gold from a golden past. Wow this production was amazing, awesome

I understand now only.always old is gold.

Exactly, this is even better then videos from these days

there is a lot of special effects in this video...

Tom Catson why

@@seshtilirest4748 I liked the cat

The 4th dimension

@@haamishmcgarry Right

They used these shop vids into the 80s and I remember every one of them..But I think everyone remembers the extra gears in the differential the same way you just described it... It's an absolute shame that theyve gotten rid of shop classes in school

Indeed! I like the way this was presented, gradually expanding on the concept in an easy-to-follow progression.

It made a momentous diff to my understanding of the concept

@@Milesco yeah why dont they teach kids in school like this? slowly adding more information over simple concept. I would love physics.

@@VestigialHead pun intended?

@@ben1627 Happy to torque more about puns if I am allowed to put a certain spin on it.

because there not giving away important information for free its the sad reality.

​@@user4667fh tf can you expect humans will always be greedy

That really true 👌🧐 very well and easy to understand , teachers in mechanical school can't explain 😂 that in 4 years of learn , the 100 years of story of ( spindle ) lol 😂

@@user4667fh at the time this was released, really only the rich or wealthy could have seen it because televisions were extremely expensive.

@@user4667fh * they're

+fakhrizza arrifi Its the cool props they have to demonstrate. Now a days we just make shit in cad and are out of touch with the physical worlds

+fakhrizza arrifi It's because they explain it with as little jargon as possible. Speaking simply is the best way to communicate.

+Tele Blues Man Nah, plenty of people still know how to keep it simple. I won't get many upvotes for saying it, but take a look at the Republican primaries in the US. Notice how Donald Trump keeps speaking simply and plainly so everyone understands him. That is one of the reasons why he is so popular.

+fakhrizza arrifi They did not assume that their audience was used to complicated things.

+fakhrizza arrifi Because actual engineers were involved in production instead of career video makers that looked up the topic on wikipedia.

LOL.... so true!!!

LOL omg asking the real questions! Never thought about saving it, and with politics nowdays its possible we need to carry these usefull informations to next humanity

Right

humanity has more faults than you can imagine, fix one ten other will surface.

Just saved it to Camera roll

Now educational videos try to look entertaining and engaging rather than getting straight to the point

I'd watch all ten minutes

Possible, we need old vintage education ads back

yeah, lov'em

Why would an advert try to educate you on how a steering mechanism works?

@@yannatoko9898 to convince you that they make the best steering mechanism on the market. To actually give me a reson to buy their product, and not just put a happy family, pop music and an oversimplified logo.

Best comment right here

She says: He must be talking about other Girls with the Boys He and The Boys: 0:43

We have a winner.

I read the second part in his voice 😂

LMFAOOO

Successful people don't become that way overnight, what most people see at a glance wealth, a great career, purpose-is the result of hard work and hustle over time I pray that anyone who reads this will be successful in life.

This is actually what most families are going through, tax and rents takes almost what they got monthly, leaving them with no savings...

I'm a nurse and I saw all this coming, so I've planned myself so I engaged in forex trading, little I know about the business though but so far so good, Forex trading has been my very means of savings lately while my salary goes for bills and utilities

Despite the huge drop in crypto and fx, I still make good withdrawals. I don't believe that profit making is not possible despite the drop in stocks when you got good mentorship

​@@damienbella5701 I'm new to cryptocurrency trading and I've been making huge losses but recently see a lot of people earning from it. Please can someone tell me what to do?🙏

The amount of time to build all those intermediate designs, just to show them for a second or two, is just pure quality.

I totally agree

That's what really impressed me about this video, the small details were impressive

modern education teach you how to learn stuff .. but does not how to think of your own

Honestly, you've learned more easily and better. Don't you?

@@Nomore686 me too)

So you're saying that the person that taught you grammar wasn't a good teacher?

@@Aelfraed26 I don't have a teacher, I am my own teacher. If you are native speaker english language, tell me please where I have did a mistake.

@@FeeleGood Oh... I see. I apologize. Proper grammar would be "Nothing is complicated when you have a good teacher"

@@Aelfraed26 Thanks 🇺🇦👍.

Не смотря на не слишком высокий уровень английского у меня, все абсолютно понятно, мне кажется даже без слов было бы понятно

I agree, animation cant beat reality explanation. Thus, they used better words.

branot89 wikipedia is the suck at explaining...anything.....if you want to know how something works, grab an old encyclopedia or watch old videos Wikipedia "A differential is a particular type of simple planetary gear train that has the property that the angular velocity of its carrier is the average of the angular velocities of its sun and annular gears."---¬¬¬¬¬¬¬¬¬¬¬¬¬:> that's really helpful....NOT..it's not even correct English

Adriana K. sounds german

Adriana K. You can always try the Simple English version of Wikipedia, sometimes that makes some articles easier to understand if you aren't an expert in the field's esoteric language.

+Adriana K. wikipedia uses the most technically correct language, which is not necessarily the most easily understandable for the layman.

frepi I’ve studied it too! Fortunately for me, this video was the only curriculum.

They showed me this video in the first year of mech eng ahah

frepi omg same

Joe Dirt needed to watch this

Because .. there are always things you don't know

Pretty much... funny that schools will cut points from your grade if you explain a historical event or physical phenomena in your words so to say , wanting the perfect definition and stuff... I love the video... simple.. commonfolk explanation... exactly what we need...

And look, he didn't ask for donations and to subscribe. I keep telling dumb youtubers to stop doing this and get to the point.

In less than 10 minutes I've learned how a dif works and could probably build one

I love it when people understand a topic so well that they can explain it with such clarity

Kralım! Gerçekten de siz misiniz?

I did undergrad and grad engineering and I can tell you this is the best video I've seen on this topic.

If your teacher was tiberio...

@@blueskies133 Perhaps is the best video any has seen...

Very cool teacher. Bet you learned alot

i wish my teacher would have done the same, altough some people in my class don't understand english.

Not merely to add entertainment, but to grab everyone's attention so they'd watch the rest of the film strip.

I don't see that on Americas Got Talent, amazing how bold men were back in the day. My testosterone rose 10 points just watching that.

this video itself was entertainment!

I let's not forget to support artist and such now a days everyone just want to use as little money as possible. now most art people have at home is copied in the thousands and bought at Walmart, instead of supporting a local artists.

It’s the 30’s, why wouldn’t there be an absurd stunt bit?

Yeah like 40 years after the Wright Brothers took flight we already made an atom bomb

@@tyronejohnsaquian9279 now scientists can't define what a woman is while pretending to be made up genders.

no the engineers weren't ahead of their time. its everyone else that's behind. its really not hard to pick up a book and learn something or to experiment on your own. most people are just lazy and want to enjoy others hard work.

We just don't teach like this in class or college anymore. Only way you'll get such a full explanation and reasoning on something like this is to personally know someone who actually understands it and wants to help you or finding a good RU-vid video.

@@tyronejohnsaquian9279 wright brothers? i think you mean Santos Dumont

Bro, es como renovar el iphone, es una hazaña tecnológica en siglos

Даже не обязательно слушать, и так все очень наглядно показано.

It's the ONLY one I've seen. But I shan't be needing another.

Stephen Butler Me too. Holy fucking shit, actually.

MLG_420 QUICKSCOPE​ I just watched it again, after all this time, just for the fun if it. People like this guy are truly rare. People that can pass on their knowlage with ease. I had one or to professors like this guy (not in engineering but economics), they could make it so simple and engaging, then there was the 'other' type of professor (the like that never left an education Centre), who was no doubt extremely cleaver, but had zero personal skills, just expected everyone to understand what he was talking about from day one. That guy spent the whole lecture with his back to you writing numbers on a board, losing 9/10s of the class. I think it was Einstein that said somthing similar to "if you can't explain somthing simply, you are yet you master the subject" This guy has it nailed down (or did).

I just want this guy to tell me how limited slip works now to complete my understanding.

Stephen Butler Im your 666 like

Nowadays tertiary education is just some researcher forced to teach lessons. So they stand up and read some slides, the students go on and teach themselves. Educational material that are clear and concise like this are seen as spoon feeding.

That's why it is called as school

that’s what happens when education and cinema/arts get public funding. give people money, it’s really that easy!!

@@jessebeegee If it were that simple, we wouldn't be having dozens of the best-funded public schools in the country failing to produce a single student who can pass their math exams. Public funding might be PART of the answer, but it is not the WHOLE of the answer. If it was, the U.S. public education system would not be such an abysmal failure that we'd actually be doing the kids a favor by shutting it down.

Before, even encyclopedias was more comprehensive. I read three editions of Big Soviet Еncyclopedia, and in the edition of 1937, one could read how to make explosives, powder and guns.

Andrew Ekleberry it’s disturbing how people just dismiss anything old as outdated and non-useful.

I was amazed how clear and informative this video was to explain plain of reference (there are few videos to watch) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bJMYoj4hHqU.html

The old Mercs were so simple, you could run it on cooking oil. Everything is supper complicated these days.

Its simple really. General public was not as technologically educated as we are today. Now these lazy bastards that educate just assume everyone knows everything, and would rather tell to look it up online than do the teaching themselves.

Because nowadays, it’s about the shock factor.

Omg I was again recommended the same thing wayyy back

44 year old me watching this for the nth time: "YOOOOOOOOOOOO"

@El Desó i've matured, i can control myself a little bit better

J'

Tu eres tags hahaha sjhwhw auhwhwhvs kdkdkdk

Didn't waste time on P C. Didn't have safe spaces. Didn't have 72 genders. Didn't waste time on snowflakes feewings. Didn't have to make sure they were inclusive.

@@teamtoken Do you know what alt right even means?

Renaissance Man they’re not even alt right, the far left uses terms like “safe spaces” and “inclusivity”

Nowadays vids are like “ur a baby breh lick and sub or bad”

Renaissance Man trigger’d!

It was probably a series of simple steps when they understood the problem they had, the solution they needed, and what they had to work with. Think of this riddle: "Question: How do you eat an elephant? Solution: One bite at a time". Many seemingly impossibly complicated problems can be solved when you break them down to a series of small, simple problems.

No one actually invented it instantly, it's just a process of developing

The conventional automobile differential was invented in 1827 by a Frenchman, Onésiphore Pecqueur. It was used first on steam-driven vehicles and was a well-known device when internal-combustion engines appeared at the end of the 19th century

@@foxymetroid one bite at a time and with a family or having it airtight and frozen when you get full

@@random-b-i2480 it's an invention called utility model type- anything built differently from the original idea. .if a table was modified from 4 legs into 3 and still function as a table that is utility model type. .and patentable

I'm sure that you're a very smart person. I have a college education yet I'd be willing to bet there's plenty of things that you're competent in or about that I haven't a clue about. This world beats us up enough on it's own; there's no reason to help it. Hold your head high and proud of who you are!

@@j.w.1695 Hey, thank you for the very kind and wise words! :) This video along with my childhood love of cars has driven me to study to become a mechanical engineer :). I feel I finally have a path in life hahaha Hope you’re doing well wherever you are! Bless you.

Just good editing back in the days when you had a reel of film, a razor, and tape.

That is a FILM, not a video, and film is much more difficult to work with.

icyburger literally.

I laughed, so I shall add a like:)

Ah yes, Spoke's theorem

*MOAR SPOKES.*

@@badjumpcuts6599 best comment

And motorcycles. Lots of motorcycles.

The music is kind of loud in the start of the video but that doesnt matter because it aint some fucking free DIY video music that rapes you ears

Just S P O K E S

Really long intro though

And most of all... it doesn't insult our intelligence by demanding 'click to subscribe' before we've seen if the content is worth beans. I've arrived at the point where if that's how a video opens, I will definitely not subscribe even if I like the presentation.

We tend to believe man was less creative in the past. But the way of thinking of a man from the pyramid building time and a man nowadays, is exactly the same. Same creativity, same inteligence. The only thing that improved was the previous knowledge. The problem when teaching things, is jumping basic concepts. The more the teacher jumps, the more difficult to truly understand, no matter if it happened 4.000 years ago or nowadays. That is why we always had and will have good, and not good teachers. The guys that wanted to teach how a transmission and a differential work in this video was a good teacher, with excellent didactic.

Crazy to think the 1930s are almost 100 years old

Subscribe to his youtube channel and hell make more

this is that we have lost, unfortunately

white people are awesome. Especially before being poisoned.

The education system knows this yet doesn't care because they want to encourage competition that's so needless

SS step by step))

I wouldn’t say nothing.

Except for quantum mechanics, but we don't like to talk about that.

@@exoticcar5482 couldn't have said it better

Me too... guess im gonna become an engineer now.

Careful, education can be a dangerous thing.

@@lastmanstanding2622 this video isn't education. It is learning. The op _learned_ how a differential works, he wasn't _educated._ Education is political. Learning only cares about reality. Avoid education. Pursue learning.

Me too haha

@@forestdenizen6497 According to the American Heritage Dictionary, their definition of "Education" is as follows; "2. The knowledge or skill obtained or developed by a learning process". I understand the point you are trying to make here, however, you are splitting a very fine hair my friend. Learning and Education are related. For example, can you be considered educated if you haven't learned anything?

Yeah I agree. Seeing something in its full and finished version often overwhelms the mind. But if you see it step by step in a basic way, you can then move on from there with relative ease. This is by far the best video on how a differential works.

yeah, i feel like that's the most effective way to teach/explain something

And they show iteration by iteration how it evolves to close those gaps to the more "complex" system.

Thats what happens when someone who truly understands how something works and is able to not only build it themselves but explain it to others.

I really wish this could applied in general teaching.. i wonder how the programming analogue for this would be. hello world?

I know right he said that like a gumby from monty Python! More spokes!

lmaoooooo my favorite part of the video

MaoTseFunkadelic i thought the same xD

#MoreSpokes

Heard that in Cave Johnsons voice. Brilliant xD

Lol

no such a bullshit back then

back then was only myspace

Follow us on Blitzkrieg

Jan Sten Adámek that was 3 years later

😆

@Ben Fletcher yes it will work only of u do it right tho.

smooth action means more spokes

Well *SPOKE* N.

Clearly not ,basic knowledge of gears is all you need

@@Tomas-ml9nv I have gear knowledge but for understanding this something just has to snap

@@andries4561 ikr

Saúl Obelleiro ikr

back then high quality was easy because instead of pixels the light was caught by a chemical film, so each "pixel" was only molecules thick

@@tommygarson8592 Also companies have to save years worth of security footage, if they stored that in 4k it would take up way too much space to be viable

@@abdisaniini I looked it up, if they would store the fotage in 4k for 6 months (wich is the requirement), then they would need 1,373 Petabytes and that at least 2 times to make sure that they would have a Backup if a hard drive corrupts. You can find 5 tb hard drives for about 100€, you would need 550 of them wich would come to a total of 55,000€ (66,520$) wich wouldn't be much for a bank.

@@deusexmachina5769 Well I guess it's probably something to do with their infrastructure then, because that does seem affordable for a bank. P.S. when you wrote a period instead of a comma I got confused, and thought it was only $66 lol

@@abdisaniini I am from germany, our use of periods in numbers is the opposite how it's used in most countries, but I fixed it for other people.

Except for one thing - a regular differential still only give you a one wheel drive car when it matters as the power will always go to the wheel with the least resistance. Now we need a video on the limited slip differential!

@@nickh5081 shut up, no we don't

All in UNDER 10 minutes. Try to find any youtuber explain anything in under 10 minutes lol

@@xtlm YT was better when everything had to be under ten minutes.

@@nickh5081 I believe open-type differential were either the only type, or the most common differential at the time this video was made. As you said, open-type differentials are fine for spinning on roads, but still a issue when driving on bumpy roads or off-road.

I realised it now that the video is 9 minute long😂. It was hypnotic

Easy...more spokes

The teachers point of view is that untill it is not complicated enough, it's not worth teaching :P

Unclear 3d animation = less time need to be spent 3d modelling + less time needs to be spend at all + less cost.

Yeah... from one of the largest corporations in America who had an entire art and media division with hundreds of workers.

You must’ve skipped the first 30 seconds

brief? dude there's like 3 minutes of dudes riding motorcycles in circles at the beginning, are you smoking crack? actually i realized that was a dumb question can i have some of your crack? because your definitely smoking a lot of that good good fucking shit

Rotisserie Chiggen yea, but once you get to the explanation it is as thorough as it should be and it keeps it brief

And now you’ve ruined it by swearing. You’re an American aren’t you?

Those were not cheap models either.

What a nice thought!! :)

What can be equivalent of more spokes in real-life

Excelent

Spohwkes*.

When life gives you spokes, you make spokenade!

No need to reinvent the wheel.

It has changed alot on the cars that can send torque differently to each wheel. Look up torque vectoring differential or watch?v=rQowh2Kr38s.

That still isn't a complete rework of the differential. It's just an upgraded version.

My Master (as in, the guy who trained me in my field. Not sure if that term is actually used in english?) used to say: Good, reliable technology is always simple. The more moving or electric parts (including sensors and all that) the more likely that something is gonna screw up. For a bit of context (and a little anecdote to prove him right): Our company was responsible for the street lights in my town, and we were in the process of excanging good old Vapor lamps with some more newfangled high-tech lamps (some streets even got LEDs). The Vapor lamps had a coil that acted as a limiter (similar to a resistor), and that's it. The newer lamps had some complicated electronics, including a ~30€ circuit board. (The Coil for those vapor lamps would cost 4€ I was told...) In the year that I did that particular job, I had to exchange countless amounts of those circuit boards. They broke left right and center, and you could always SMELL it as soon as you opened the case they were kept in... (I hate that smell.) Also keep in mind the company had just begun installing these maybe half a year before I joined them. The Vapor lamps? Maybe five coils the entire year. And we had 10 times more of them than the new ones at that point.

Sapphire EX LED lamps are pretty simple too. The problem: companies that produce them are programming them to stop working at certain time. In fact led lamps, on good quality can last more than 20 years.

it's the style of learning and what people thought mattered back then and today. In my engineering courses the focus is always on the derivations of things, the grand concepts, but rarely are we simply taught how something works in practice. Worse we get basic info, variables, eqs and have to teach ourselves the complicated stuff. I wish we taught things more simply, less theoretical and more practical since that's what's needed today, there are phds and other people who can work on improving concepts and theories, but we need a hands on workforce who can the job, then we can focus on the inner details. teach the simple stuff first basically, not last.

I know right, 4 years of music school and they couldn't teach it to me this simple

You were in physics class when the auto shop kids were working jobs taking these things apart.

@@Bacopa68 And you were in the youtube comments 🙄

People don't get more intelligent, we just get to know more things that we use for discovering new ones because intelligent people from the past had make out them.

Chris Hiscocks XD

The hashtag is the Chevrolet logo at the end. Still very informative and pleasant to watch.

@Hello there, how are you doing this blessed day?

What more reason do you need?

@@mexicancanteen9596 no idea, like catching your clothes or jewelry on it and getting a body part ripped to bits???

Safety wasnt that big of an issue then. We are all pussies now compared to our grandparents.

Is nobody going to comment that the centre hump that runs through a car now a days is a thing? Originally in the 50's to now was to accommodate the drive shaft of a rear wheel drive. Even front wheel drive cars still have that hump, for like, no reason.

Because driveshaft will be inside a hollow tube or be covered with something when it's inside the cabin. Engineers wouldn't let that huge of a safety hazard be exposed.

more is always better

If you keep adding spokes does it then become a " bespoke " wheel?

More spokes we need more and more spokes 🤣😁👍

It's the Kerbal way. There's never enough struts and boosters.

my wife

yes, the authors are apparently dead, but their work lives.

Equim i would like your comment but it's currently at 69 edit (2 seconds later) well it just hit 70 so nvm

check the channel that uploaded it lol

ru-vid.com/group/PLI7lqC4ZBnIlL4-jIq9wesjXv0J5FJKgY

I think these were used as fillers in between movies at he local cinemas???

@@ILHillbilly67 or auto shop... something you would have to attend a technical school for now