SPECTRALOCK PRO Premium Grout† is a patented, high-performance epoxy grout that offers excellent color uniformity, durability, stain protection, and beautiful, full grout joints in an easy-to-use, non-sag formula.
Part A and B liquid, Part C powder, gloves, sponge, and instruction manual are included in the packaging of Spectralock Pro Premium either a single unit or commercial unit from LATICRETE Middle East
Surface Preparation
All surfaces should be between 4°C to 35° C
Make sure tile surface and open grout joints are clean and free from debris, grout spacers, or standing water.
Ensure the tile surface has no residual film from adhesive setting material.
May Scratch Certain Types of Tile & Epoxy resins may affect
the color of white or light-colored porous stones
Test grout on a small area to ensure compatibility with cleaning Water.
Refer to the product data-sheet & How-To-Install Guide with questions
Ensure the Preparation and Installation Tools are on the Jobsite before grouting.
Mixing
Cut and open pouches of Part A and B and pour the liquid of Part A first, then Part B into a clean pail. Make sure to squeeze all the liquids out of the pouches. Mix liquids thoroughly, completely blending all liquid from the sides and bottom of the pail.
Once blended, add Part C color powder to blended A and B liquids and mix thoroughly with a margin trowel or slow speed drill mixer.
Grouting
After surfaces are cleaned, allow drying thoroughly before grouting. Spread grout using a sharp-edged, firm epoxy rubber float. Work the grout diagonally across the joints, packing them full.
“Cut” excess grout off the tile surface using the edge of the float held at a 90° angle like a squeegee, stroking diagonally to avoid pulling grout out of filled joints.
14 июл 2024