Arcade Repair Tips - Buying A New JAMMA Harness? This One Is The BEST!

Подписаться 11 тыс.

Просмотров 2,8 тыс.

50% 1

Welcome to the Arcade Repair Tips Video Series! In this video, Tim Peterson discusses the best wiring harness to buy when using the JAMMA standard to wire (or rewire) your arcade cabinet. For more information, please visit our website at www.arcaderepairtips.com and please watch for more videos in the Arcade Repair Tips Video Series! Thanks for watching!
Retroarcade.us / Holland Computers Jamma Full Cabinet Wiring Harness Loom
Link: bit.ly/hc-jamma-harness

Хобби

Опубликовано:

20 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@billholland2241 5 лет назад

Thanks for the great product review guys... :)

@delsarcade 5 лет назад

These are great and the price is right too. I have seen MANY harnesses in my day. And I finally settled on the ones that I currently have that are JUST like those. The only difference is that mine have a sticker that's translated on them. It's good to see that these are printed right onto the plastic. Very cool.

@skeletorment 4 года назад

I just bought my first CPS2 B board (w an A board) and this really helped me choose what kind of harness I want to invest in. Thank you so much. If you have any more reccomendations for the kick harness, please let me know in a reply. Thank you.

@bakemonokagami3735 5 лет назад

Nice vid ! I've been searching good quality JAMMA harness for a few weeks now. Does anyone has an alternative in Europe ?

@ILordSpawnI 5 лет назад

1. Pinout Labeled (not sticker) 2. Wire colors are standard jamma 3. All common pins wired 4. 5v and ground is 18AWG 5. Ground is daisy chained 6. Wires are pre-crimped 7. Heat shrinked at the base That hits about everything i would want in a harness. $13.95 is crazy low price for that.

@coldspringsgolfpro 4 года назад

How do you wire a lcd monitor into the harness or to a power supply. I have to use a remote to turn it on and off. Thanks

@mrawesome2742 3 года назад

My jamma harness is really tight, meaning it’s very hard to press on to the board and hard to remove. Is there a Safe way that you know of to loosen the harness? I was thinking of sticking a flat head screwdriver in it ay the top middle and bottom and slightly twisting the screwdriver to expand it. but I don’t wanna damage anything.

@arcaderepairtips 3 года назад

In most cases, having a tight JAMMA harness is a good thing as it ensures that a good connection is being made to the pins on the board. With that said, we understand that yours may be a bit too tight for your liking. If you continually plug and unplug the JAMMA harness on your boards then it should loosen up over time. Yes, you can stick a flat head screwdriver in there to try and loosen it but we don't recommend it. If you are going to go that route, try a back and forth "rocking" motion instead of a twisting motion as it's less likely to damage the pins. Hope that helps. Also, just wanted to let you know that we will be covering your question on our Live Show Episode 45 on Thursday, November 5, 2020 at 5:30 PM CT. Here's a link to the episode if you want to watch it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZNLOlMyUHu4.html. Thank you for your question and good luck with your future repairs.

@bh2627 8 месяцев назад

I got a 60 in 1 Jamba PCB board and the VGA output does not work on either one why not? Please help

@arcaderepairtips 7 месяцев назад

The 60-in-1 has a DIP switch for display mode. Make sure that this switch is set correctly on the board. For VGA output, DIP switch 2 should be in the ON position. If the VGA output still doesn't work, it could be an issue with the board itself. Hope that helps.

@kensalisbury7673 4 года назад

Would this work for 6 buttons. Like street fighter gams on Pandora box. Please can you let me know. Please

@arcaderepairtips 4 года назад

Yes, this harness comes with wires and terminals installed for the button 5 & 6 locations on the JAMMA harness. To hear more of our thoughts on your question, check out Live Show Episode 37 from Thursday, March 5. Here's a link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fGFE80QM4Rc.html

@LouDominquez21 4 года назад

If I bought this for a sf2 ce board, will this jamma harness eliminate the need for the cps1 kick harness?

@arcaderepairtips 4 года назад

Lou, unfortunately it will not. You will still need a CPS-1 kick harness in order to wire up the kick buttons to the board. We will also be discussing your on our Live Show Episode 42 coming up on Thursday, August 6, 2020. Here's a link to the episode if you want to hear more of our thoughts on your question: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IlCOqzjeDDY.html

@LouDominquez21 4 года назад

@@arcaderepairtips okay! I thought I had wired my buttons incorrectly. Thanks for your help!