Arcade Repair Tips - Repairing Monitor Collapse Issues

Подписаться 11 тыс.

Просмотров 51 тыс.

50% 1

Welcome to the Arcade Repair Tips Video Series! In this video, Tim Peterson and Michael show you how to fix monitor collapse issues (such as the thin horizontal line problem). For more information, please visit our website at www.arcaderepairtips.com and please watch for more videos in the Arcade Repair Tips Video Series! Thanks for watching!

Хобби

Опубликовано:

20 мар 2011

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@chadbauch7970 8 лет назад

We need more of your videos!

@frankgant4725 5 лет назад

Super informative and helpful. Now to go look at the Vert. IC

@realevostevo 6 лет назад

Thank you for making this video.

@practicemakesdecent3732 3 года назад

Thank you! One of my caps on my X-Men vs Street fighter monitor chassis I can tell broke. Had like a white liquid dried up, must have swelled. I'm able to spot that while watching your video, thank you!

@elcheapouno 4 года назад

Would be really awesome if you guys went back to making videos like this one in particular, very awesome information

@Tomsonic41 9 лет назад

If you have a TV or arcade game doing this, switch it off as soon as you notice the problem. Without the vertical scan, the horizontal line will be VERY bright and will burn the phosphors much quicker than usual. After a few days of running like this, you may well see a dark line across the screen where the phosphor has burnt; even worse than the normal screen burn that arcade games get.

@111EJG 12 лет назад

Hi, thanks for your video it was very helpful. I have a quick question. Hypothetically speaking, if you took out a TV monitor and replaced the old chassis with an arcade one, would it be able to work as an arcade monitor or would the arcade chassis just not work with a TV monitor? Just wondering because I have a spare TV with no practical use right now.

@marcelosofth 6 лет назад

Hi friend, I have a Se-Cai / Wei-Ya monitor ´21 and my vertical is the same as the closed video, could you tell me if the C5143 transistor is what I have to change?

@airthrow 12 лет назад

Do you guys have any tips for getting new B+'s on chassis? Places to order and brands to buy/avoid? Why don't they include B+ capacitors on chassis cap kits?

@111EJG 12 лет назад

Thanks, but I'm still a little unsure about how to go about doing that. For example,the neck on my TV has 9 pins, and the board it uses has twelve holes. Most of the arcade chassis I've seen on eBay have 10 holes. And one more thing, don't you also have to measure the inductance both horizontal and vertical of the yoke? I remember reading that when I found a forum with the same question. Any help would be nice. Thanks for the other comment.

@MegaMonkeyboy85 11 лет назад

Hi, i want to built my own neo geo mvs bartop with a mvs slot, and i was wondering if i could take just the monitor of a 36cm CRT tv to put in my cabinet, instead of putting the entire tv inside ? I hope that you'll have time to answer me :)

@StevesRealWorld 10 лет назад

What's Michael TV repair store's webpage?

@8-bitBishop 12 лет назад

Yes it would work. 2 things though: Obvious number one: The neck board from the arcade chassis is compatible with the TV pins, (usually is if it is the same size monitor)Not so obvious number two: You need to get a voltage meter and set it to ohms, you then need to (measure) the resistance (both horizontal and vertical) of the yoke(the copper coils that slide over the neck). If the resistance matches the rating of the arcade boards specs. Easier than it sounds.

@woodruff3000 9 лет назад

Hello Arcade Repair Tips I have a TV with SCART input so the question is how I make a scart cable that I can use with my jamma harness. Hope you can help me

@TheTekken3d 9 лет назад

hello!! one quick question??? is it possible to connect a tv as arcade monitor????? please help

@lovieuru 12 лет назад

I have this problem on my Tempest cabinet, except the top half play just fine. Is it bad Transistors?

@Th3Wh4mmyDKS 7 лет назад

I'm having a trouble now with my arcade, there is no image but the sounds is fine. I'm thinking that maybe the crt broke or something but i dont know how test it. Can you guys help with any tip or something? Thanks

@arcaderepairtips 7 лет назад

Th3Wh4mmy, just letting you know that we covered your question on Episode 2.5 of our live show. Please watch it for our thoughts on your issue. I believe it starts around the 20:15 mark. Thank you for your question and let us know if you have any additional inquiries about your issue after watching the video and we'll try to help you out further. Hope that helps. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wTDtASQjwzw.html

@MrMacman98 10 лет назад

Yeah vertical sweep failure, I had a computer monitor with the same problem Turns out it was the solder joints on the vertical controller transistor had broken

@BlockABoots 5 лет назад

What if i have a similar issue to this but the line is right at the top of the screen?

@stylez1989 4 года назад

then you just trash it and get a led tv? its 2020

@IzludeTingel 3 года назад

any online repair services? not an arcade, just an old TV (panasonic TR 205) little thing... not entirely collapsed, but it's on the way there. the picture hamburgered and the vhold isn't stable. any way to get this up and running?

@arcaderepairtips 3 года назад

Since it's not entirely collapsed, try replacing the caps first to see if it helps the issue before moving on to the steps that we discuss in this video. Hope that helps.

@thesyfyguy Год назад

I have a 19K4606 monitor and trying to find a Thermistor for it.

@ReggieJohnsonakaSmoothRJBeats 5 лет назад

Hello sir...I'm having some issues here...I was trying to get my pi2jamma working with the Hdmi timing and Inkind of messed up my monitor I believe. I also when I take the Jamma off and play a PCB game Nna showtime and plug the Jamma in the PCB I get these red lines stroll as well as on the Raspberry pi. This just happened after I put the wrong settings / Hdmi setting / other Display settings on my CRT. Does anyone knows how to fix this issue for my CRT Arcade monitor? Do you think my Jamma is messed up or is a Resolution problem? I have a pic I took..if could send you the pic to your email..if you have one?

@ReggieJohnsonakaSmoothRJBeats 5 лет назад

An I also have a red led light by the jamma plug in

@dcrunck 12 лет назад

how many legs should the medium cheap have

@robertodlt5 10 лет назад

Theres a cabinet by me and tue seller says it needs a new bulb...where can I find that?

@prostreetdino7946 3 года назад

I was given a rally bike arcade game and sound etc all works , the problem is that the monitor is all short small colourful vertical lines , , checked out power supply and all good , the neck tube has a very very small orange light which compared to other monitors on you tube mine is super dim/small , any other ideas? At my end of the rope already lol , please Help lol

@arcaderepairtips 3 года назад

Based on your description, this sounds like more of a board issue. Check out our post and video on Inspecting An Arcade Board (www.arcaderepairtips.com/2011/03/16/inspecting-an-arcade-board/) for some tips that might help you out with this problem. You might also email some pictures of the monitor to us at questions@arcaderepairtips.com so we can take a look. If you would like more details about your question, please tune into our Live Show Episode 52 on Thursday, June 3, 2021 at 5:30 PM CT. Here's a link to the episode if you want to watch it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RjuNCBBRTk8.html. Thank you for your question and good luck with your future repairs.

@truhunk1 4 года назад

I have a 38 year old monitor, and there is no IC chip ?

@jaimeb.384 6 лет назад

Amazing videos, but difficult to follow with the audio.

@iperez63 Год назад

Did these guys learn electronics in the penitentiary?

@berm11 3 года назад

I have this problem in a chasis weiya, the b+ is very high 247v, the input in the vertical should be 24 and i have 34. Can you give me and idea where to see or what is making this problem?

@arcaderepairtips 3 года назад

We asked our monitor repair specialist Michael about your question and here are his thoughts: There are three main causes of this issue. The first is cold solder joints. Double check all your solder joints (especially on the larger components) and touch up as needed. Next, check all of the caps on the b+ voltage line and in the power supply. Pay close attention to your 35v-50v caps and make sure that they are not open. Finally, it could be that the power supply does not have a load on it which could be caused by open resistors in this section. It's common for this to happen when the flyback or the HOT goes bad. Look for these resistors and replace as needed. Also, just wanted to let you know that we will be covering your question on our Live Show Episode 48 on Thursday, February 4, 2021 at 5:30 PM CT. Here's a link to the episode if you want to watch it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_Y2j-bEFhjI.html. Thank you for your question and good luck with your future repairs.

@berm11 3 года назад

@@arcaderepairtips Thanks men i really appreciate your message, sure i will be in the live on thursday.

@jakecarruthers9231 8 лет назад

Something sparked on the back of the monitor in my arcade game and now the picture is all pink, fixable? It's still playable but all pink

@magdanoz88 8 лет назад

I hope that you've solved your problem but I have made a quick research and found this. If the color of the monitor is close to ff00ff (you can google it) - I think it's the green that is dead, because this color is 255 red, 255 blue and 0 green... Use the previous video in the playlist to solve the green problem.

@Gambenoful 13 лет назад

Is it not necessary to discharge a monitor to fix a cold solder?

@RaulBillieJean 5 лет назад

don't you suppose to discharge the tv before even work on it ????

@fishingwithsam7526 Год назад

Can y'all help me on my arcade

@arcaderepairtips Год назад

Sure, you can send a brief description of your problem to us via email at questions@arcaderepairtips.com. Please send pictures as well if you can. Thanks!

@robertmorrill2697 6 лет назад

it says coin jamb

@jonnyesper6698 3 года назад

great video .... bad audio

@vodkagobalsky 4 месяца назад

Not sure if you guys will see this comment or not but my monitor is exhibiting this issue. After 5-10 minutes, it fixes itself. Any idea how I can fix this? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Wvknjq4y7bo.htmlsi=iCiiwq3nq1rjyKVY You also see these horizontal lines at the top that appears when it first turns on but goes away after a few minutes.

@arcaderepairtips 4 месяца назад

Try adjusting VR450 on the main chassis. This should help with the hourglass effect. If it doesn't, the problem could be electrolytic. The horizontal lines at the top are usually a good indication that it's time to install a cap kit. Hope that helps.

@vodkagobalsky 4 месяца назад

@@arcaderepairtips I actually had the chassis recapped pretty recently. The hourglass effect does go away after the monitor is on for 5-10 minutes. It started happening after the cabs were moved recently. I can look into the VR450.

@robertodlt5 10 лет назад

*The

@departe5672 12 лет назад

Hi there,i have one Samsung CRT monitor Flat screen,do i have to discharge it before looking at the inside parts?It does not work at all,i just plug it in the soket,and press the power on buton,but nothing happens,what should i look for ?Where to start ?