Are “studs” getting in the way of your pot lights? We have a solution for you!  

“There’s a stud up there” perfect cinema😂🙌🏻

What's the name of those lights that you put in the ceiling and can i find it on amazon

Wow😂😂😂

LMAO the stud

Waffle lights, I use alot of them. Installed by a Stud.

It’s not called a stud. Studs are located in walls. It’s a joist.

I want to install lights with you, we are lighting factory, directly selling similar lighting products. High quality but Low price, Welcome to order!

Be a man, cut the floor joist 😅🤣😂

Fk it covers more than 50% and the tabs wont close what now??!!

Dust everywhere. That's not the rigth way to make a hole in the ceiling,,,

LMAO it's called a joist😂😂😂 God love you

wafer lightings needs at least 3 inches above for heat displacement away from joists, or you'll run the risk of a fire.

It’s a cord not a stud . 😂

Maybe this is the actor from the tv show You

what power source is that light connected to

Studs stransfer vertical load down to the foundation via compressive strength. Floor joists transfer their load horizontally to the stud walls via tensile strength.

Its hard to get me to laugh at post like this, but this shit had me cryin 😂😂😂

I’m looking for these and I like the plug in shown. But what ones are like that and don’t have a larger driver box? Or do they and that’s already up there? I’m working with a outdoor false ceiling kinda deal and only have 2”

What brand lights are those? I'm looking to replace my current slim pot lights with ones that are a cooler color temp like 5000k but having a problem finding lights with those connectors like in your video. 🙏

What’s that sound when you turn in the led lights?

This dude funy

Hi, Evey here! Thanks for tuning in and watching our video. We'd like to send you our newest product, the Matter smart RGBWW downlight, for you to try out and potentially review. What do you think?

This lights have been around for years

what are these called?

A stud & Pot 😂my oh my

Yes, I did. I have used them for years.

Great animation

What if its right on the center

where do I get that light!?

What brand?

Just drill the damn joist out to allow the wafers to suck right into place

Fkn MISLEADING & IGNORANT. 1) This isn't a stud, it's a joist. 2) If the joist covers 50% or more of your hole you cannot fix this pot light. The two spring-loaded clips on the pot light frame are sitting on its diameter, meaning to say if you drew a line between them you'd split the potlight in half. Those clips need enough clearance around them to pass into the ceiling and latch onto the drywall from the top. Therefore if your JOIST is covering almost 50% or more of the hole you drilled you can't mount that pot light up there. The pot light's recessed portion will fit in there easily but the housing that goes into the ceiling will not (because of those mounting clips). Please be careful before you blindly follow this careless advice and plan your pot light locations in advance accordingly. If you are replacing an old light fixture that sits in the middle of a room and cannot/do not want to patch up your ceiling then consider other options.

That stud was not STRAIGHT - all type of signs.