ATLAS Throttle Lock Installation Video

Подписаться 405

Просмотров 25 тыс.

50% 1

Our in-depth installation video will walk you through the process of installing the ATLAS Throttle Lock, the best aftermarket motorcycle mechanical cruise control available. We have all the details explaining how to install our innovative friction pads on all types of motorcycle throttle housings.
For our installation instructions in PDF format, go here: www.atlasthrottlelock.com/pag...
If you're looking for a motorcycle throttle lock comparison chart or details on how a throttle lock is different from a typical motorcycle cruise control, please visit our website at www.atlasthrottlelock.com.
The ATLAS Throttle Lock comes with a 30 day money back guarantee, backed with our incredible customer service. Purchase the ATLAS Throttle Lock and take control on your next long ride.
0:00 Short verbal outline
0:18 Installation Part 1
0:42 Throttle Housing Styles A, B & C
1:12 Primary and Secondary Surfaces
1:29 ATLAS Key and Friction Pads
1:43 The Throttle Seam
2:19 (A) Style Housing - Primary Surface
3:42 (B) and (C) Style Housings - Primary Surface
4:23 (B) and (C) Style Housings - Secondary Surface
6:03 Install the Friction Pad on the Throttle Lock
6:45 Ex: 1 of 2 - Bottom Kit, (A) Style Housing, Primary Surface
8:45 Ex: 2 of 2 - Top Kit, (C) Style Housing, Secondary Surface
10:01 Troubleshoot Notes - Clocking for clearance
11:30 Continue Example 2 of 2
12:09 Removing the Throttle Lock

Авто/Мото

Опубликовано:

22 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@easye1311 6 дней назад

These instructions were very good ..thank you

@noelbowerman1562 11 месяцев назад

I've had the previous model. I found the paper instructions a little confusing. I'm thankful for your video ,it made it very clear how to install.

@TheWanderingGeezer Месяц назад

Well done.

@BigBikeAdventures Месяц назад

Why am I only finding out about this now??? Where have you been hiding this kit? Take my money!!

@rdw3171 11 месяцев назад

I've got an earlier model with different friction pads. The current pads I'm using don't work for more than a couple hours of use before they start slipping. It's a 2016 CB500X and the example you show in the video would be "B". There is maybe 1/8" of the pad that makes contact, and it takes a very thin pad. Will the new friction pads work with the older units? I want to like this thing, and when it works the way it's supposed to, I do, but it never works the way it's supposed to for very long. I also have one on my DR650 with the same problem.

@ATLASMoto 10 месяцев назад

Hey! The new friction pads will work with all of the 2-button ATLAS throttle lock kits. It should work great on the CB500X and the DR650! Reach out to us at info@atlasthrottlelock.com for assistance!

@daveclark9255 14 дней назад

So these only work with rubber grips? I have Kuryakyn Isogrips (metal) and there is zero clearance between the grip and the housing.

@ATLASMoto 14 дней назад

It does work with a variety of non-rubber grips, including Kuryakyn ISO grips! You'll want to check out this video about that. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6MVl8LCKDNA.html They are tight, however the metal portion of the grip can be pried over to make more space. Just take care not to scratch them!

@taronyoung5768 21 день назад

If you live in KC: Step 1: Take your bike to Knobtown Motorcycle for installation. Step 2. Pay your service tech Step 3: Actually, get your bike back on the road. Thanks for watching

@aboteaf 5 месяцев назад

I have suzuki gsxr 1000 2020 and I see there no enough gap to install the atlas, is there a way to install it? Clear instruction?

@ATLASMoto 5 месяцев назад

You have to pull back the rubber grip as seen in another video we have, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ba-Yed0cq_s.html

@cemalcemretekin6310 11 дней назад

Which kit I should buy for the ADV 350?

@ATLASMoto 11 дней назад

Bottom Kit as long as you're not using Honda Heated grips! If you have the Honda heated grips, roll with the Top Kit. You need 3mm in between the grip and throttle housing for the ATLAS to fit.

@motonomadjr 5 месяцев назад

For Àfrica Twin 1000L 2017 superior or inferior? Thanks

@ATLASMoto 5 месяцев назад

Top Kit for that bike!

@milbella1 10 месяцев назад

What if you use pad 1 and still don't have clearance?

@ATLASMoto 10 месяцев назад

Depending on your motorcycle model, you can typically pull back the rubber grip a bit to make more room for the ATLAS. Let us know what you have and we'll help out!

@ahmedbadri3911 2 месяца назад

@@ATLASMoto i have a 2022 kawasaki z900 and there is no space to fit pad 1 and the rubber grip doesnt move

@ATLASMoto 2 месяца назад

@@ahmedbadri3911 Reach out to us at info@atlasmoto.com with a few detailed pictures of the grip setup on your bike. We'll take a look at it!

@darinsassen617 3 месяца назад

these instructions are ridiculous. Previous version didn't have a trillion steps

@ATLASMoto 3 месяца назад

That's because this version is intended to be more comprehensive. Previous versions of the installation video did not consider throttle housing types that are commonly run into, though we have some videos for specific motorcycles that point out special considerations. Many riders won't have to consider throttle housing types because their throttle housing is flat or otherwise doesn't have special characteristics, but many riders also have throttle housings with beveled sections and other such things, so we're trying to cover more bases by providing more knowledge. The actual installation is simple, but setting up the friction pad for some of the throttle housing types takes a bit of consideration and that's what we're trying to cover here. Hope that helps!

@darinsassen617 3 месяца назад

@@ATLASMoto Ok. will try it on my Yamaha Raider

@ATLASMoto 3 месяца назад

Let us know if you need any assistance! You can reach out to us at info@atlasmoto.com. We recommend the Top Kit ATLAS for most of the Raiders, because we see them with a throttle cable bracket that tends to be sticking out from under the throttle housing. This bracket can interfere with the Bottom Kit ATLAS by snagging on it. You can check your bike to see whether the bracket comes out from the bottom of the housing.