Automotive Paint Removal - Tips & Products You Need and How To Use Them - PART 2 of 2 - Eastwood

Подписаться 515 тыс.

Просмотров 163 тыс.

50% 1

Part 2 of 2. In this video that originally aired LIVE on Friday January 17, 2014, Matt demonstrates many of the techniques available for removing paint and primer, including 3M Bristle discs, Gel Paint and Powder Dissolver, Flap Discs, Stripping Discs, Sanding Discs, Blast Systems and grinders.
Visit Eastwood: www.eastwood.com/?...
Part 2 of 2. In this video that originally aired LIVE on Friday January 17, 2014, Matt demonstrates many of the techniques available for removing paint and primer, including 3M Bristle discs, Gel Paint and Powder Dissolver, Flap Discs, Stripping Discs, Sanding Discs, Blast Systems and grinders.
Are You an Eastwood Guy?
Eastwood has everything you need to do the job right, including welders, plasma cutters, paint and paint guns, rust solutions, powder coating supplies, metal fab tools, hand tools, fender rollers, soda and abrasive blasters and more.
Since 1978.

Авто/Мото

Опубликовано:

21 янв 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@Demondal 10 лет назад

Thank you for this video. I'm about to strip my engine bay down for a repaint and wasn't entirely sure what to use. Very helpful.

@SprayWayCustoms 9 лет назад

Very helpful and well explained.....I think I'm going with the stripping pad method for starts.....thanks for your time!!!!

@SprayWayCustoms 9 лет назад

Yea Mike, I don't know how many coats of paint and what kind of paint on it so I think I need to just strip it down to bare metal....I was just trying to go the quickest and easiest route...

@SprayWayCustoms 9 лет назад

Thanks Mike....I will be very cautious not to put to much heat on the panels.....thanks for your help

@JordanPayneLV 7 лет назад

Awesome 2 part video!

@teferagetachew 4 года назад

Thank you for the video. this so important for me to remove paint

@Motodude35 10 лет назад

I'm trying to strip the paint off my 1970 vw beetle of its original paint but I'm not sure what I should use and I'm a beginner at doing this and I'd like to do all the steps of stripping and priming before I send it off to painting

@moneyhustlebizniz916 10 лет назад

I'm new to this stuff. I have one question though. I am interested in the media blaster you have there. The blue one. If I was to purchase one would that be it or would I need an air compressor? I have an 80 gallon air compressor in my garage. Can I use it with that or is the media blaster you have there in the video it??

@timothyjrosser1 8 лет назад

after you have got the paint off with the chemical stripper, what steps would you take before painting? Would a wipe with some white spirits be enough to remove it?

@CFDJohnnyE 10 лет назад

Regarding media blasting.....if my work is contained to a small area in the garage, can it be neatly swept up and reused?

@beznerindustries3057 8 лет назад

can i use a tiger wheel or a flap wheel to strip surface rust and paint

@davenameless 8 лет назад

How long does the phosphoric coating protect against flash rust?

@ludditeneaderthal 7 лет назад

when using the alkaline strippers (non citrus), keep a small "finger bowl" with lacquer thinner in it. the lac stops the stripper "biting", and is quite nice for the little splashes onto sensitive flesh that seem to be burning their way to shanghai via the bones in your wrist, or your belly, or those delicate spots not so mentionable on so "family" a comment board, lol. NEVER let stripper dry on the panel, re application on top of dried just makes awful, smeary, sticky plastic goo that defies removal. warm metal strips easier than cold, but also dries the stripper faster. NEVER use chem stripper in direct sunlight, btw, it goes to goo as often as bond breaking, after chem stripping, wipe with lac to "stop" the stripper, THEN you can soda blast, prep etch, etc without ghosts of alkaline corrosives spoiling your day.

@woodworkerroyer8497 2 года назад

No one else was brave enough..... Why is this able to burn your belly?

@ludditeneaderthal 2 года назад

@@woodworkerroyer8497 lol, large pieces, waist high tank, mopping the stripper on with a Tampico roofing brush, it becomes a fairly splashy affair. Lean on a wet edge, it just becomes an itch til you peel the wetted t-shirt off the flesh... or so I read once I think, lol.

@eastwoodco 10 лет назад

To purchase a product, click a picture at the beginning of the video. And don't forget to SUBSCRIBE to our RU-vid Channel to get all of our great videos.

@Just_smile89 9 лет назад

Is it okay to use the chemicals on a steel bumber and plastic grills ?

@LH-spec09 7 лет назад

Thank you.

@abdullahsaad9340 5 лет назад

Nice video 👍🏻

@fuzzzeballs 2 года назад

well that's answered my question! chemicals and sand blasting it is

@eastwoodco 2 года назад

Glad we could help!

@michaelkaser2219 6 лет назад

If you get an engine back from the engine shop but won't be working on it for a little while is it okay to spray the machined surfaces with fast etch? (cylinder walls, cam/crank journals)

@eastwoodco 6 лет назад

I don't recommend Fast Etch. Ask the engine builder what they recommend, which will likely be coating them with oil.

@mrgoodtimes05 3 года назад

If someone is stripping the threads out of plastic discs they are more than likely hitting the edge of the work piece. It will jolt the disc tighter causing the threads to pull.

@jockellis 3 года назад

People don’t seem to realize the grinder turns in a direction that tightens the threads. I’ve seen people put one on and put all their strength into tightening.

@AgentWest 3 года назад

They do have to be at least somewhat tight. I have an air powered 4.5" grinder that loves to throw the discs off. Had to chase one or two across the shop before! :)

@SteveDavisCarGuy 8 лет назад

The gel method, does it need to be neutralized?

@CJurasin 5 лет назад

I wetsand the panel when I've got most of the paint off.....and the water neutralizes the stripper. Just wipe the water off immediately after and you can coat it with Fast Etch or a similar product.

@eastwoodco 10 лет назад

Are YOU an Eastwood Guy? Check out this video from Eastwood to find out: Awesome Office Pencil Sharpener - Sharpening the Pencil - Are You an Eastwood Guy?

@jeffreydeutsch7336 7 лет назад

I guess it is self evident but the bristles are more than plastic. They are impregnated with a ceramic abrasive. I would like to see a comparison between the coarser bristle brush and the coarse 3M roloc pads like the purple one or Norton's Gold one. I would like a comparison between the plastic bristle brush and the stiff unbacked woven hard wheels in general.

@norbertrudas9852 5 лет назад

Hi guys, I have a question, can I use brake fluid for paint removal gel ?

@phreaktor 2 года назад

What psi is needed for the smaller media blasting kit?

@ArchivosMusicales Год назад

Good question. I would like to know as well.

@englishrose212 3 года назад

My car is peeling like a skin I can pick it off, is there any way to cure this or do I have to take it in for a respray ?? :O)

@KWW0321 3 года назад

Yeah spray glue on it and take the pieces and put them back on like a puzzle:)

@jockellis 10 лет назад

Soda blasting leaves a film which is pH base. Does this need to be removed before painting?

@eastwoodco 10 лет назад

Yes. that film must be removed. We recommend using Eastwood PRE Painting Prep, available in aerosols or gallons. Visit www.eastwood.com.

@MotoGPatrick 3 года назад

Pretty much any media leaves a film. I've used plastic media on aluminum aircraft skin and we used products similar to this companies fast etch and then Pre as well as alodine. At home, I've found a wet media blaster kit on a high power pressure washer to be awesome. I used Rustoleum gell rust dissolver first on axle rust and on a used Deaver leaf spring pack I stripped and refinished. I'm ordering the fast etch and pre. Really just have good paint and rust-free sheet metal but axle and light frame weld rust. Corrosion control protocol on an off-roader.