Avenger .22 Air Rifle - TUNING GUIDE + Accuracy Test ! + (Review) - Air Venturi - PCP Airgun Tuning 

I am still so impressed and grateful for the time and effort you put into this and otger videos. Thank you, Thank you, and Thank you!

This man single handedly created the most informative pcp assessment ever done. Like ever

I hand pump this gun to redline and I’m 76 years young. Trick is I shoot 30 pellets before topping it off again. Great gun in .22 using Crosman 14.3 grain pellets. Dine size at over 50 yards- helps to have a 10-40 power scope with my old eyes . Fill the stock with Electricians pipe sealer ( one pound ) - silences sound and adds weight to better balance the gun. Maxed out it’s a sledge hammer.

Please NEVER take down this video. A link to this video should be printed on the first page of rifle's manual and even on the box...that's my thought. BTW, my wait for this rifle to become available has just gotten much harder to bear.

This presentation helped me immensely, as I’m an old school springer guy who’s new to PCP guns. I really enjoy your casual, yet knowledgeable approach in all of your videos! I set my Avenger up with the pro tune, and had it sighted in with less than 20 shots! It’s such a great intro to pcp shooting! Thank you for producing such fine videos 👍!

I’ve been shooting a springer for 3 or 4 years and am now looking to go pcp. Watched 5 of your videos this morning and feel confident making a decision now. Just wanted to thank you, what a huge help this has been.

I can’t wait till mine gets here. My N V Liberty’s in .177 and .22 are amazingly smooth, and very accurate. My Avenger is in .25 which will complete my N V collection . I always wanted a .25 Liberty but they have never been available here in the USA. I have one with synthetic stock that appears to be the same, and has held up to serous hunting in cold and hot weather here in Pa. The .177 has given me some trouble with flipping pellets as the probe is coming out of the magazine and creating a double loading situation if not careful. A drop of silicone oil on the probes probes O-rigs has helped stop this issue and using 10.4 grain pellets v/s 7.4 grain definitely helped as well. Thank you for contacting Tyler and confirming the .22 and .25 are ported a touch differently. Can’t stop watching this video over and over. PYA said mine will be here around 7-20. Thanks again. Can’t wait for the main review on AEAC! God bless

Uuhhggg... now I gotta buy ANOTHER gun. Thanks a lot Steve!🙄 Great tuning guide! Always extremely informative, not only is the info you provide pertinent to the gun you are reviewing, it pertains to most airguns with similar features. Even if you're not in the market for the gun being reviewed airgunners should still watch because they'll learn something about the guns they already own!

Based on your excitement I have just ordered a .22. This thing appears to cover every base except reliability and only time will tell, thank you Steve. Cant wait for the full vid and the RDW.

Thank you for this video Steve !! On Tuesday morning, I was on the phone with Pyramyd pre-ordering one in .25 . Then later that night, i put my feet up to rest and your video on it came through. Perfect timing !!! Im glad to see that it's not too pellet fussy. Cheers !! -Jace. 🍻🍻🎯

This is THE most complete demonstration on how to tune this pcp, bar none! A copy DVD should be included with every one of these. The Avenger is going to turn the air rifle world on it's .... ear. Anyone who wants one of these is going to have to wait for all the preorders to be filled first. I can see a wait of a few weeks to a few months to get one. My name will be on a list for one as soon as the boss says ok. I always get in the last word.....yes dear.

Steve, thanks for an EXCELLENT tuning guide . This looks like fun with a lot of tuning options. I bought a .22 B/P from Pyramid Air. Guides like this will sell more guns as they dissolve the PCP mysteries.

As a newbie thank you for the time and effort you put into doing this, Learned so much to get started in this and have fun with my boys.

Ordered mine in .25 a few weeks ago to go with my Nova Vista Liberty’s in .177 and .22. I have always wanted a Liberty in .25. Sadly they were never available in the USA and I tried every route to get one from other countries, so, this is about as close as I’m going to get. Nova Vista makes this gun for Air Venturi. I have no doubt about that. Of all my air guns, even my high end air guns. The liberties are my favorite. The only reason they don’t ride around in the truck with me like my SK-19, is because of their length. I hope they make a Bullpup someday. I would rather have a 300$ truck gun than a 2K$ truck gun👍. Thanks for your hard work.

Just recently got into pcp and I was doing a lot of research on what to start with and this gun seemed to be the one to get. Your video by far was the most knowledgeable most understanding and simply interesting even if I wasn’t into the gun you made this video very easy to watch. I appreciate the video I just bought the avenger and I’m loving it, I just gotta figure out this whole tuning and trying out different pellets and All that fun stuff. Thanks again man have a good one

I bought my Gamo Urban after seeing your review of it. I ordered an Avenger TODAY after seeing your regular review and this Vlog. MIne will be delivered around 10/20, so I'll be salivating and watching all videos of it on RU-vid. Yours is the only one I downloaded (since I have Premium and hate ads!).

I love that you put so much time and effort into these videos

I ordered the .25 for squirrel hunting. This tuning head-start is PERFECT! I don't 'do' bag work....or any of that. I hunt. So this will compete with my Gamo Urban (insanely accurate and precise!) for my field gun. I have REALLY HIGH HOPES! Thank you, Steve for all your tons of work....especially in the wicked Florida Heat and ..."humdidity" !!!

Extremely well done. My order for the gun was put in through PA on the 19th. THANK YOU!

Steve, you are the best at connecting with you audiences as I find you to be engaging without viewing your followers via your nostrils. We met at RMAC last year and I appreciated that you were not too busy or unapproachable. I also appreciate your having your wife involved in your more recent projects. It reveals very good unity. Stay strong and Godspeed.

Thanks again Steve,this tutorial will help in my Avenger .25 tune. Much appreciated.

Thanks for the in-depth look at the avenger, finally pulled the pin and received one in.177. Pro tune 1800 psi with 2 3/4 turn on spring. 10.5 crosman 960 fps 12.5 nsa slugs 910 fps Power tune 2700 psi spring all the way in 10.5 1085 fps 12.5 nsa 995 15.0 nsa 850 This is insane for.177 🤷🏻‍♂️

Hi. Thanks so much for this video!! I have preordered the avenger planning on setting the reg down to 1600-1800psi to get maybe high 700’s with 14-16 grain pellets. Based on what you’re showing I can go even lower for more power! That’s amazing. Thank you for doing the work for me. I appreciate it. It also firms up my choice to purchase the avenger.

My Avenger is coming in later this week. I watched this religiously as it will be my first PCP. Thank you for what you do. Fantastic guide and detail. I should be slinging lead in no time!

Steve is the best pellet gun teck on any channel hands down . His knowledge is on another page

For anyone following for .25 info, I'm shooting 26g fx hybrid slugs at 960fps, 53fp, into sub moa groups with the reg at 2900 and the hs at +4 turns from all the way out. And, after 3 mags, I'm hand pumping to top off from 3200 to 4300 taking 90-100 strokes.

Definitely my next purchase, hopefully sometime around my birthday in January (let’s hope the economy is nice to me and my living situation). Amazing channel, thank you for existing!

As a brand new pcp air gunner guy, thank you for this video. I enjoy numbers and tinkering and this video was very informative and easy to understand. Big ty for continuing to re enforce to remove the air before messing with the regulator

Awesome vid, brother! Thank you. ✌️

We pre ordered 2 x .22s and 2x .25s 3 weeks ago. We shot a sample and was HIGHLY HIGHLY impressed with that .22. This gun was giving my .22 Impact 700mm slug liner gun a run for its money at a 100y after we did some tuning.at the 100y indoor range we was time after time putting ten Griffin .217 25g cup base slugs under 1.2 minute... 5 shot groups was easily under a minute (more around .7 to .8 moa) it also shot 27.5g .218 NSAs really really well but not as good as the Griffins. Now no it can't compete with our high end guns realistically but with The two listed slugs it was damn close (there's more then just accuracy in owning high end guns). With some time with the gun (we had two days with it) and really getting it dialed with the Griffin slug and i believe consistent minute or better ten shot groups would be doable (to give an idea my RAW HMX LRT .22 pushing .218 27.5 NSAs at 990fps at the indoor range will consistently print 10 around .8 to .9 minute) it's simply the 1 or 2 flyers that it would throw that was causing 1.2 to 1.5 moa with most being right around 1.25moa. 5 shot groups was consistently well under 1 moa and the reason is the Flyers would normally happen around shot 7 thru 10 and out of all the 10 shot groups we shot it would throw one or two flyers and very seldom was a flyer threw within the first 5. We was single loading so it wasn't a mag issue and we was waiting at least 10 seconds between shots so it wasn't a reg issue and we used our Lab Radar (was checking 2 FX chronys against each other and the lab radar.. The FX chrony are dial.. Super accurate btw..) On every single shot and the flyers wasn't happening during odd velocity fluctuations so it was not that... I believe a light lapping of the barrel and having a proper crown cut would end the flyers. This ONLY happened with slugs, we dialed back 18.13s to 880 and they shot extremely well at 50 and we had no flyer issues. 25.39s at 840 was on point as well and even did well at a 100.. This gun is fantastic and it's not reviewers just hyping a product. It's a superb 300 dollar gun and will bring a lot of people in to our sport because when they get it they are getting a gun that js capable of preforming extremely well digging the hook of PCPs in deeper. The trigger is very good but it is NOT in any way a match trigger so do not expect it to be but it is simply an amazing trigger for it being 300 dollars. With Steve calling it match grade that tells me there are some that are better then others... Now that is not saying it's bad in anyway it's not.. It is a fantastic trigger period but it is not a trigger like my Crowns or RAWs. Some may be match quality and the one we shot was just a very good trigger that i can't speak on. Plain and simple this gun can not be touched at its price. Not even close... The really awesome part is that the twist rate is allowing slugs to preform well... From what we got to do we know this gun is capable of really throwing slugs and putting lead on target at really ling ranges with high B.C slugs. We did take the gun to 200y but the wind was up and we didnt have anymore time with it to wait for less wind and it was variable wind.. We was shooting at 8 inch plates at 200 and was connecting plenty but we know for a fact this gun will shoot under 4 minute at 200y (8 inch target at 200 is a 4 moa target) we could tell that the slugs was staying stable out to 200 so the twist rate will keep even longer slugs stable if your really slinging them fast. What im really hoping is the gun is capable of 3 minute groups at 200 and i believe that it is with the right slug and im taking with just tuning 3 moa at 200. If that is the case with some barrel work, really getting the power dialed to what the gun and slug want this could be a 300 dollar gun capable of doing what todays top tier guns are capable of... I can not wait until ours get here and hubby and I get to go to work dialing these bad boys in and seeing what can really be extracted from them.... Whats really funny is im more excited to get these then i am when a new FX or RAW is on the way to me... The reason? Because i know what those guns will do and how capable they are... I dont know what these guns can do and how capable they can be. Its gonna be so much fun and im pretty sure these will be what have our attention and all our other stuff will not be shoot for a while lol.

Great tutorial, I have the avenger in .177 and tried your advice with interesting results. Pro tune 10.5 crosman @ 960 12.5 nsa slugs @ 900 power tune 10.5 @ 1090 and 12.5@ 995 15.0 nsa slugs@ 850. Thanks Steve.

26: 38, yes, all the lid on that magazine needs is to be tightened by the center screw. Turn the lid 180° clockwise, let go of it, letting it snap around to closed again. When it just goes over the ..nipple?.. and seats itself, it's adjusted right, as I've adjusted with mine with the Seneca Aspen. Info courtesy of Hajimoto's video, who shows how to dis and assemble them. Those magazines are becoming popular on rifles, and are around $20. The rifle is Amazing. The review and adjustment instruction is consise and looks to cover everything. Thanks Steve.

Great extensive review with a lot of tips. Thanks. I’m a little concerned to where the air gun market is going with the advent of the slugs. With their - relatively - high B.C., they go 3 to 5 times further than diabolo-shaped pellets. One of the great thing about pellets is that they bleed energy very fast and the risk of hitting something if it goes through the animal or, God forbid, I miss, I know they will be on the ground in a very short distance. With the slug, we are now in the realm of .22LR bullets and everyone knows (or should) that they can go a looong way out. It might be great for target shooting but I’m not sure I want to go hunting with them at the long range they afford. The Avenger low price is going to attract people for they first air gun, or even first gun, and they might not realize how far a slug can go. All that being said, I’m trying to find a reason NOT to buy one...

Great vid, Steve! Very in depth. Just a bit of correction to help your upcoming RDW vid....the upper scope rail is metal and mounted to metal. It's a small detail, but probably of importance to quite a few potential users. I personally wouldn't trust a scope mounted on a plastic rail to hold zero very long. -Donnie

This Video made my Avenger owning experience amazing. Thank you so much for all your work and sharing it!

Always a great thing to have a Air Rifle that’s not pellets picky and shoots slugs as well absolutely awesomeness!

If I remember right, This vid is why I bought an Avenger. Just saw vid 7 days after it was posted. It made me feel like a fool if I didn't buy one. lol

excellent video! I just tuned the .25 cal, the first gun I ever degassed and didn't leak, (better than my fx classic). out of the box was shooting 920 fps but wasting air reg set at 2900. I set reg to 2200 and decreased hammer spring one turn from factory and shooting 860 fps and getting easy 64 shots per fill. thanks!!

I 'SO' appreciate you spending the time to educate new-go-ers" like me. My Venturi arrives Mon-Tues and excited, but knew nothing about this gun, just that it bosts accuracy.. Thanks for putting together this information so better understand the capabilities this gun has. Many thanks.

Just did your pro tune to my 22 avenger, shooting dimes consistently at 55 yards is amazing, thanks

Steve thanks for another great video ... I have the Avenger .25, and I can get well over 900fps with 25.39 jsb...its currently tuned to 880fps at about 2200 psi reg , hammer spring all the way in...,now on the last turn out adjusting the hammer spring the gun dropped about 6 fps to that 880 fps accuracy is very good half inch or less and many hole threw hole shots at 50 yards .... from what I know from Ted talking to the Air Venturi rep the .25 internals are in fact different specked , and are set up exclusively for .25 the transfer port is opened up more in .25 compared to .22 to the correct percentage for .25 since tranfer port size is based on percentage of a given caliber if you are doing it correctly ... its really not a 1 size fits all when it comes to transfer ports if you want it right ... I dont know about the hammer spring -if it is different .... I do have a .22 Avenger ordered so this video with all of your info 0n the .22 will help me set up the tune ... I think the PRO tune ,and power tune you made are what I am interested in settig my gun up with .... GREAT WORK as always Steve thanks for all the testing you do , and I will post up here new info I get from testing more with the .25 Avenger I have ..... its just so amazing this gun just nails the check list for the best features you could have on a air gun ,and does it for 300 bucks ! ! ! pretty cool ! the Avenger has to be PCP gun of the year ! industry game changer !

Ted on Holdover Vlog in his excited style :) contacted Tyler Pratner from PyramidAir to ask about internals and is the .25 using same internals as the .22,apparently not so,the .25 users different valving and other internal parts in the .25 so it can hit the 45 FPE and beyond. Ted was concerned it was what Benjamin did with the Marauder which had the same .22 internals in the .25 which is why it was lacking in the FPE department. So big potential in the .25.

I just ordered this gun and after watching this YT video I feel like I owe you my firstborn. What a power-packed video thanks.

Another amazing video Steve. I just ordered the .22 Avenger Bullpup. It hasn't even arrived yet but you've already done all the research for me. It gives me great info for setting it up once I get my hands on it. Thanks for all the work you do to support our airgun community.

NOTICE - Avenger .25 cal TUNING GUIDE coming this fall/winter. Steve

Today, my four year old daughter named the imaginary horse she rides around the house "Steve Shally". Now, she gallops up and down the hallway yelling "Hya, Steve Shally! Hya!" I should probably spend less time watching AEAC.

Thanks Steve for such a tremendous review of the Avenger. I just got this gun in .177 caliber and it is quickly becoming my favorite air gun. So much gun for the money. I wanted the .22 but stupid Illinois law says I can't get it shipped to my house. Out of the box, it is very accurate off a wobbly table. Thanks for the tip about pulling the trigger at a slightly upward angle. It breaks so much more cleanly that way.

Fist time pcp owner. Been loving these videos for a while now! About 2 yrs. finally bought my avenger. Seen this video about 10x and still learn something new. From into to outro

I have a .177 Hatsan Flash that loves the Piledrivers Steve. I currently have it shooting .22 inch groups at 25 yards at 780 fps which is 28 ft/lbs. I love it, the squirrels hate it.

Selling my 25 gauntlet. And getting avenger

I got my Avenger Friday and my 1/2” unf adapters that I have for my Nova Vista Alpha/Liberty are a direct fit! Awesome sauce! My adapter also came from eBay because I helped a guy in Slovenia with the measurements to make mine for 36$ and it’s awesome. As are my eBay moderators from a guy in Louisiana for like 45$ that makes this gun Church Mouse quiet! Oh my goodness. Thanks so much for the video. Donny FL already has the adapter because he made them for my beloved Liberty’s y’all. Do it...get them...you will be totally surprised just how quiet a .25 cal or .22 cal pushing a Hades at 900 can be! WOW! God bless y’all!

Good morning, A short message to say how much I appreciate this video and your work. Thanks to the video, it's so easy to fix this avenger. A big thank-you

28:38 As a big fan of the Nova Vista rifles, this concerns me. These guns, while often punching well above their price point, seem to have one common issue. That issue being they are known for having leaking issues due to a poppet that is not up to snuff. There are guys in the airgun community who currently make replacement poppets made of delrin and peek that solve the issue, but this may be a task the average consumer may not want to tackle. Hopefully, that's not the case here and it's an isolated incident. Otherwise, Air Venturi/Pyramyd Air are gonna see a boat load of these coming back in for repairs, just like American Tactical has been experiencing. Like I said, I hope I'm wrong because outside of the leaking issues, these guns are fantastic.

Good video. The "crown" is really just to protect the rifling at the muzzle. You can have a "square" crown like the Avenger but you have to be super careful that you never hit the muzzle in any way that will mar the rifling at the end of the barrel. If you leave a moderator on all the time, you have nothing to worry about with a square crown.

Steve is so good at explaining ... now I need to buy another PCP. Thanks so much. Keep up the great work and videos.

Very helpful video on the ins and outs of tuning and tweaking.

😂 thanks, I should be asleep right now, but I am here watching this 🍻 very well done as always

How can 26 people give this video a thumbs down? WTF do they not like?

Just took delivery of the Avenger today in .25,unboxed and mounted scope a Hawke Vantage 3-9x40,took around 6 shots to zero at 50 yards shooting JSB EXACT King 25,39gr using a FX radar average 944 FPS,tried NSA slugs 26,8gr average 902 FPS. Will do fine tuning over next few weeks. Regulator seems maxed out,so probably lower reg to around 2400psi for pellets. Overall initial impression is outstanding.

Totally enjoyed the video. It was VERY informative for me. I just purchased an Avenger .22 cal and I (right now) don't even have a way to fill it. I ordered a compressor, because a pump would have me daisy hunting from underground. SOOO in the meantime I'm trying to learn as much as I can about setup, performance and the like BEFORE I actually take the first shot from it. I added a Barrel Band and a Duck Rail Moderator. Hopefully it will have better stability, and it gives me the opportunity to mount things as the barrel band has Picatinny on the sides and bottom. I'm thinking I will just go with the factory setup and see how it performs. I'm looking to give a dirt nap to two VERY destructive groundhogs on my property so I wanna do it right, but not expend a ton of cash I don't have to get it done. Thanks for all the good info.

this is most amount of Ammo I've seen you have for 1 gun...& shooting accurate

i increased the hammer spring from out to 3 3/4 turns in and my 25,39 pellets are hitting the bullseye. great information. thank you!

Thanks for the video! Very informative! Just bought the gun and hope to use it soon!

I enjoy you as a person you are helpful and positive and really enjoy air guns. As much as we all watching do.

Thanks Steve ! Set my gun on an eco tune $45 eBay pump fills to redline in 15 minutes Still learning the gun-I shot 1” groups at 50 with the jsb hades Thanks for your help and know how Gun is light and slick and pretty darn quiet. Thanks again!

I just bought this rifle a week ago i saw your video before I bought it thanks it helped alot

I am a newbie. So new I have not bought a gun yet. I am torn between the Avenger and the Gamo Coyote. You video has given me lots to think about thank you.

What a phenomenal video. Precise, entertaining, pleasant to listen to and informative, and that is a very hard combination to achieve.

Lot of info love ❤️ the hard work and time spent on this awesome Air Venturi Avenger THANK YOU!

Best review I’ve seen so far by a long way just outstanding! 🇺🇸💯👍🙏🔥

Awesome. This maybe my next buy. Thank you for reviewing this rifle. I just got the new Benjamin Akela and posted a short video of it. Nothing compared to your reviews. It’s just a video of my happiness. I love it! 🤣 Hoping you can do a review of the Akela soon. I’m very interested how it will perform.

one great video steve!

This is a great video I've watched it several times and go back to referred to it whenever I want to clear up something. On my power tune which is at 43 ft lb energy using the 25.4 grain pellet is set at 2400 PSI and four turns in. With a little bit higher regular pressure I got 46 ft lb but I felt it was straining the guy and having everything so high and that was at about 2,700 PSI on the regulator

Just bought one in 177cal. I have thousands of 177cal pellets from 10gr to 16gr from every manufacturer. Thanks for your help in my decision on this purchase.

I think this gun is the most pellet n slug friendly you've reviewed...it likes it all...

Fantastic video thanks for sharing all this with us. I ordered a .177 last night and I’ll order a wood stock one in January when they are expected to be back in stock.

When he talked about that eco tune i felt warm inside! For just backyard fun ill be running this on the regular!

Just got the wood stock. Love your "Pro-Tune" did 1800psi changed HS to +3 turns getting 890fps 31fpe with a JSB 18.1g. Out of the box was wasting a lot of air.

Thank you for all the information and the great detail!!!!!

Absolutely, a standard pellet is stabilized by "air drag" (think of a badminton birdie) where your slug in more centrifugal force by utilizing the rifling in the barrel. I'm looking at the Air Venturie Avenger Bullpup and im pretty sure the "guts" are the same as your test model. I was thinking between 850-900fps and use a relatively light pellet for 50-100yds. I dont even have the gun...im an over thinker

Got one in .22 wood stock. Thanks for the video it was the reason I bought one. I love it!

Ive been waiting to watch this

Awesome guide sir! Thank you so much!!

I love your videos. VERY INFORMATIVE!!! I'm going to buy an Avenger and this video was very enlightening. Thank you

Simply an impeccable job !!! as usual!!! My sincerest congratulations!!! Thank you Greetings from Argentina!

As a newb to this level of air guns I can honestly tell you I’m fairly intimidated by the mountains of knowledge I’m going to have to acquire…and extremely excited

I've been searching for a new PCP Air rifle for a few months now. I've been looking from high to mid range. AA, Brocock, FX, Hatsan. After hearing about the Avenger and seeing what a regulated tune-able $300 airgun can get you I say the hell with the high end guns. This is what I want. Thanks Steve for making this video and making my next purchase that much easier.

Great video avenger .22 and compressed should be here any day and just got a new Maurader .25 4 days ago shoots great

Very informative ,to the new Guy's so theydont damage their air guns.. Thanks fur the time and info you share

1 Great full bodied review. Thanks, I just subscribed. If you dont have a adapter/silencer, there`s no need to remove the barrel shroud to clean the barrel. Will be easier just to unscrew the front cap.

Steve your good I just order the 25 but I should have gotten 22 your info is helping alot do more on this gun it as alot to say.

Love the video now I need the gun! Great job Steve!

Mine is due in this Thursday ,,,I'll have to watch this video again on the pellet and ammo reccomendation ..plus the tune in ,,,,,,,very informative ,,,,that you

Great video great content. Thank you.

Hi Steve! First of all, thank you for your excellent, excellent! talk and tutorial on the AV Avenger! I am a relatively new air gunner and am still learning...a lot. Thanks to your excellent video(s) I have learned even more, so a huge thanks for that! Anyway, I own an Air Venturi Avenger in .22 like the one in this video. It is my 4th PCP air rifle and is thus by far the best one I have so far. I am a budget buyer so there are no high-end, pricey rifles in my collection. I am seriously contemplating either the Avenger in .177 cal or the Benjamin Marauder Semi-automatic in .22 cal...again, due to recently watching you very thorough video on it :) I am using ultra cheap pellets. I shoot the Crosman Premier Hollow Points 14.3gr. I consistently shoot groups smaller than a dime at 25yds. I do realize that at 25 yds, it's not uncommon for most rifles to group smaller than a dime, but none of my other rifles seem to be capable of that...the AEA HP SS seems like it's definitely capable, but due to it's unreliability in the time that I have owned it, I can't prove that yet. So...anyway, I have tuned my Avenger down to roughly 1400 psi on the regulator. De-gassed the rifle, turned the reg screw all the way in and then backed it out about 1/4 turn...equated to about 1400psi on my Avenger's regulator. I then backed the hammer spring screw all the way out (roughly 6 turns for the entire range after turning it in all the way and then back out all the way) I then turned it in about 1 1/2 turns. I'm thinking I should be pretty close to your 'Eco tune' and should expect roughly 100 +/- consistent shots. I am shooting Crosman Premier Hollow Point 14.3 gr, unwashed and unsorted. I typically group within a dime at 25 yds. It's pretty consistent but of course, not always. I am only getting around 70-80 consistent shots...is this ok? or do you think there might be an issue with my rifle...faulty regulator? Maybe an unbalanced ratio between regulator setting and hammer spring? I am a noob when it comes to those adjustments so I could very well have something screwed up. btw...I shoot 25 yds indoors in my basement so wind is never a factor. I have a pretty decent pellet trap/target setup using duct seal putty so there are none or very few instances of lead shrapnel from the pellets impacting the rear of metal pellet traps...only the occasional lead on lead impacts that occur deep within the putty.

WOW! That review was GREAT! This was the first time that I have heard you! I don't have a lot of patience, but you had me the entire time!

Thanks for the informative video, just got my Avenger .25 in the mail this weekend. Cant wait to let her rip, this is my first PCP Rifle. Own multiple center fire weapons. Waiting for my ammo to come in the mail currently! Thanks again brother 🍻 cheers, Struthers.

Seriously!!!! Thank you ! Appreciate your time and then sharing !

Que cálida de vídeo amigazo. Saludos desde Nicaragua tengo ése rifle. Y es mi primer pcp y estoy aprendiendo mucho con este video.

Great explanation. I can't wait for the full review.