Avoid Blockages NOW | Feed and Expansion Tank Cleaning

Подписаться 325 тыс.

Просмотров 31 тыс.

50% 1

In today's plumbing guide i will be showing you how to clean your F&E tank. I will show you how to take all of the old rust out of the feed and expansion tank, reducing the chance of blockages in your heating system. If you like the content leave a like and please subscribe for more content like this as I've got a lot more to come and there will be something that will help you out.
Tools i recommend for this job below:
Radiator Change Kit(bungs) - amzn.to/3UN4h9S
Drill Pump - amzn.to/3Tr3omp
🛒 My Shop -www.amazon.co.uk/shop/thediyguy
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The DIY Guy may earn affiliate commission if you purchase via the recommended links. These links will not cost you any extra.

Хобби

Опубликовано:

11 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@Bazza47 Год назад

I checked my FET yesterday ahead of the winter when putting some additional insulation over it and it was absolutely minging, not quite as bad as the one in the video but not far off. An hours work for an amateur like me has now removed the possibility of getting a blockage. What was disappointing was I had my boiler changed this year and they put a magnetic filter and inhibitor in but left the FET alone which seems madness to me. Instead of the bung you put a link to I just used an old silicone gun nozzle that was blocked up with silicone with a bit of tape wrapped round the outside to give it some grip. Worked a treat and cost nothing

@chrise7058 7 месяцев назад

Useful video thanks. A job for the summer since my loft close to freezing. Never knew about drill pumps. That's my Christmas present to myself sorted!

@Exodia1986Necross 2 месяца назад

All of that sludge was in the wholesome water , it’s mind blowing .

@amazing451 Год назад

Would be a good video to see on how to add inhibitor to the rads.👍

@TheDIYGuy1 Год назад

On my list 👍

@Setanta3000 Год назад

Can we please add the repressurising the Central heating?

@GpoppaJohn Год назад

I’ve tried and failed dismally.

@RossHbn Год назад

Spot on, as always. 👌

@TheDIYGuy1 Год назад

Thanks Ross

@sharpz44 Год назад

Did mine in summer ,was very bad ,heating is definitely better now

@TheDIYGuy1 Год назад

Absolutely 😃

@pasgas12safe58 9 месяцев назад

After bunging the outlet, I always siphon the tank with a larger diameter hose pipe into the bathroom w/c or outside drain, whilst letting the tank fill with fresh mains water. As long as there are no large solid lumps & keep you keep fresh water going in, no problems👍

@anyat686 6 месяцев назад

Hmm i was thinking about doing that for my cold feed tank.

@charliekingpin8568 11 месяцев назад

Great video so many thanks and yes I done it ok :)

@TheDIYGuy1 11 месяцев назад

Great job!

@danwoodward7738 Год назад

Thanks for all the great content. Only recently found your channel so I've been going through all your previous videos also. Appreciate all your efforts

@TheDIYGuy1 Год назад

Thanks very much 👍

@rowson9265 Год назад

Would be great if you made a video on how to add radiators to an existing system. Great channel btw, subscribers growing nicely 😊

@TheDIYGuy1 Год назад

Thanks 👍, good idea

@jodkel Год назад

Great video. I would certainly be interested in a 'Adding inhibitor to a radiator' video. ;)

@TheDIYGuy1 Год назад

Noted! Thanks

@mikebolt9753 Год назад

Hey nice vid. I thought I saw a table saw review video on the channel I was looking forward to watching later on?

@TheDIYGuy1 Год назад

Hi. Thanks. Yes, the table saw video had to come down due to a technical issue 😞

@naime1339 4 месяца назад

Any thing to do with vent pipe?

@jazzbansal8097 Год назад

Great video .. I had to change Rad valves to TRV and add 2 Radiators I did clean the tank out before draining After I added 2 Rads and changed the TRV I filled the system And it was a nightmare The Rads would only trickle fill When I finally filled the Rads There was air lock Only The upstairs Rads worked And the 2 added Rads are still not heating up The old system always been a difficult one Lots of time consuming Any advice please

@matthewedwards6492 Год назад

Close all the rads down apart from the ones not working and hopefully it will shift some air.

@AndyMJF 7 месяцев назад

Ive just moved into a new house. I think we have this type of water tank. When the heating is on it sounds like the tank is constantly filling. When thmthe heating is off,there is annoying drips. Our tanks are built into our bedroom wardrobes. So its a wake up call every morning 😂

@fartypants5696 Год назад

Just a thought, where does all that mess / rust come from? Great video.

@jacktheplumber Год назад

Good question. In this video red rust suggests oxygenated water getting into the system. A problem! The tank does not seem to be overfilling, so perhaps there is a leak and it is being topped up (the fresh water will also wash out the fernox/inhibitor) or maybe the system is pumping over. If you put a large glass jar under the vent pipe, you will see if it is pumping over, because it will fill with dirty water from the radiators. Also if you tie up the ball float for a few days, you will see if there is a leak, because the water level in the tank will drop. But again each F&E tank will tell a different story. It will show different signs and water colours. I doubt that this one has ever been cleaned, or had a rad flush, or had an inhibitor ever added, let alone a power clean. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TS3N248QxLI.html

@Neo-mw1pp Год назад

How does pumping over cause oxygenated water?

@rogerpolden921 Год назад

Great idea with the drill pump ( I cleaned the tank out with a sponge and loads of kitchen towel). But great advice and, hopefully, my particular problem has been resolved. Quick question: can a cordless drill be used to operate that pump? Your one looks on the video as if it has both a battery and a corded connection. Very useful and informative videos. Keep up the good work! 👍🏻

@user-tm6pm8xk1o 4 месяца назад

My tank has never been so dirty I closed the tap, as the video shows. After cleaning the tank, as I didn't have the rubber to close the feed pipe, the water continues to fill the tank, through the feed pipe, why does this happen? Forcing water to be flushed. Please help

@theoisaac9948 Год назад

💯👍👍

@TheDIYGuy1 Год назад

👍🙂

@850r2 Год назад

Genuinely, why do we have these anymore if we've got Combi Boilers? Excuse my ignorance but it seems archaic.

@nigelsmith3964 Год назад

Combi boilers can't be used in all houses/buildings. Combi boilers aren't all they are cracked up to be, the often leak and struggle with large properties - there is a lot to be said for Traditional systems.

@KeyserSolsi Год назад

Are there still any of these open fed systems still about??

@TheDIYGuy1 Год назад

There are indeed 😃

@devjon123 Год назад

Yes, ours is open fed. I'll be heading up into the loft today to check the F+E tank. I cleaned it out a few years ago but tied the ball valve up with a bit of cable from a joist. Great channel - I've subscribed 👍

@nigelrichardson5035 Год назад

I’m heading up there too to fix mine…great channel!

@fabiosilva3495 7 месяцев назад

Thanks for making the video but I only watch it after my heating pipes went into blockage. No I need to watch videos in how to unblock the heat system pipes. 😔