Bad Rotors Symptoms: 6 Common Failure Signs. The brake rotors, also known as brake discs, are what the brake pads clamp onto when pressure is applied to stop the wheels from spinning. They are made from cast iron and are attached to the wheel hubs. When you hit the brake pedal, hydraulic pressure forces the pads against the rotor surfaces on both sides, creating friction that slows the wheels. This converts the vehicle's kinetic energy into heat energy. The rotors absorb and dissipate this heat energy generated during braking.
Typical Rotor Lifespan
On average, brake rotors last between 30,000 to 70,000 miles depending on driving conditions and habits. Aggressive driving that involves a lot of heavy braking will wear them out faster. Rotors usually outlast brake pads, but still need to be replaced at some point as they wear thin, get scored or warped. Ensuring the rotors stay in spec and are resurfaced or replaced when required is key to safe braking.
Symptoms of Bad Rotors
Here are the common signs that your brake rotors may be worn out or compromised and need replacement:
Vibrations Through Pedal/Wheel - If you feel strong pulsing or vibrations when applying the brakes, the rotors could be warped from excessive heat cycles. This uneven surface causes annoying shaking and poor brake bite.
Unusual Noises - Squeaks, squeals and grinding noises point to glazing, uneven wear or rust buildup on the rotors. This hampers smooth pad-rotor contact.
Visible Damage - Inspect the surface for discoloration, deep grooves from wear and tear, or rusting from corrosion. Healthy rotors should be relatively flat and smooth.
Longer Stopping Distances - One of the most hazardous symptoms. If your car takes significantly longer distances to come to a halt, the rotors are likely too thin to provide sufficient frictional surface area for the brake pads. This severely impacts brake effectiveness, reducing stopping power.
Excessive Heat Issues - Overheated rotors can warp or crack. Signs include burning smell from the wheels or faded/discolored rotors. This also accelerates wear and tear.
Blue Tempering Color - Bluish undertones on the rotor surface indicate they’ve been subjected to extremely high temperatures that compromise integrity through material stresses. This reduces shear strength.
Disclaimer: This content is for educational purposes and should not replace professional advice. As an experienced mechanic, I aim to provide helpful insights, but I'm not liable for any damage or issues arising from the application of this information. Always consult a qualified mechanic for specific vehicle needs. Viewer discretion and responsibility are advised.
6 окт 2024
