Balancing Act Static vs. Dynamic Tire Balancing Quinn Thomas from All J Products Explains 

Video starts at 0:53

May be balanced, but looks a little out of round.

Even "right out of the box" I'd always wipe down a surface with a solvent like lacquer thinner or even (safer) isopropyl alcohol to ensure the weights have the best stick possible.

2 things and please hear me. You're correct is the way you explain dynamic. You're incorrect in saying dynamic is better than static. 4x4 tires all should be static balanced. As rubber wears off tire the tire is getting lighter. EVERY 1000 miles on a 35/12.50/18 a 4x4 tire needs rebalanced and rotated. Static balance only because 4x4 tires are not speed rated nor will they be traveling 80mph most of the time so no need for dynamic to take wobble out of wheel. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TwY585gqltQ.htmlsi=lwAE_zKFC94O92bK ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-i9jkOVZiL24.htmlsi=XCgDoVaPtpUTDdUP

If you have to add weights more than one time with one spin your settings are incorrect. Spinning a tire and wheel 4 times saying it's perfectly balanced is wrong. You added weights 4 times. Way way over the required amount of weights in one single position inside and outside rim placed weights. And before you pick apart what I'm trying to teach you just know I've been installing tires since 1986. One spin. One weight placement inside and outside of rim for dynamic. One spin to perfectly balance tire means your initial settings are 100% correct. A second spin to check only will read 0:00 if procedures are all correct.

You may not need to clean it with a brush. But, you do need to clean it with alcohol for adhesion to glue better ..

50+ years ago I had a retread 14" tire on a bubble balance machine, it would have taken 2 pounds of weight on one side to get it into static balance! One could look at it and see it was way out of round. We turned the tire in for warranty.

Great video...I learned something new today. Static vs dynamic balance ...wow!

In my experience anything 33” or larger should be balanced in static mode. I always hear people saying “you should really Road Force balance it” but the majority of those people are clueless on how tire balancing works. Road Force machines can’t properly match large (33”+) tires just because the machine doesn’t have that capability in that mode. It doesn’t matter if you have a 4th generation or even a newer 5th generation Road Force machine, either. The other thing people don’t realize when they complain about having a tire static balanced vs dynamically is that a large tire that has been static balanced will probably never go faster than 90 mph which most M/T’s are rated for 100mph. Drag racers and road racers alike use static balancing for high speed driving. IF you choose to balance your large tires dynamically then it would be best practice to balance your tires every 20,000 miles.

can you mount a 37x12.5x20 on a ranger DST 2420, or do need a special balancer for larger tires?

If the numbers are too high you can dismount the tire and move it 180 degrees from where it was. BTW Static is fine but not having a cover thor that machine is kinda dangerous!

I just balanced a set of 15”x10” used Jeep wheels with 35’s for a friend. On Dynamic it was asking for 26oz on the outside and 10oz on the inside directly opposite from the outside weight. It repeated on a second balancer. Static was 6oz on the centerline. No way I’m putting 2lb+ of weight on a wheel.

That tire is BAD ... I can see its lumpy as it spins.

Great video of how to balance tires improperly.

😂 this guy is clueless 😂 omg

Quick question, would a static balance work good as a dinámic balance?

I think you need a roadforce balancer. You clearly have a low spot with that much weight needed. Either the rim or tire. Be that as it may, the RF machine would tell you where and u can spin the rim/tire to match those spots and reduce all that weight you put on the outside plane. Even with the size of that tire/wheel assembly, that’s a lot of weight….

What rims are those??