Ball Joint Replacement Mazda B2200 Ford Courier Sway Bar Bushes

Подписаться 8 тыс.

Просмотров 7 тыс.

50% 1

Get the Horus Works Work Gloves here:
www.amazon.com/s?me=A23TUQ68U...
Ball Joints and Polyurethane Bushes - how to Replace them on a B Series Mazda for Ford Courier mini truck. I'll show you the steps I took to replace the top and bottom ball joints and the shock absorber and sway bar bushes in good time and at home in a garage.
Follow the mini truck budget build series here:
ru-vid.com?list... wBOirGHtUzwbXiPifRSqnJco9Mu_
How to Install LED Headlights on your truck: • LED Headlights Install...
Link to Part 1: • Budget Mini Truck Buil...
Link to Part 2: • Budget Mini Truck Buil...
Link to Part 3: • Budget Mini Truck Buil...
Link to Part 4: • Budget Mini Truck Buil...
Link to Part 5: • Budget Mini Truck Buil...
Link to Part 6: • Budget Mini Truck Buil...
Link to Part 7: • Budget Mini Truck Buil...
Link to Part 8: • How To Lower Your Mini...
I hope you like the videos.
Link to parts used:
Ball Joints: www.rockauto.com/en/catalog/m...
Bushes: www.ebay.com.au/itm/142251007...
-- Please Subscribe If You’d Like To See More Videos --
Other Useful Car DIY Videos: EASY:
How To De-Badge Your Car: • EASY: How To DeBadge Y... Windscreen Chip Repair Guide - The Costs, and REAL Results: • Honest Windscreen Chip... Car Window Tinting Tips For Beginners: • Car Window Tinting Tip... Snow Foam Test - Worth the Time and Money?: • Snow Foam Test - Worth... How to Clean Your Car: • How to Clean Your Car ... Follow on: RU-vid (Subscribe): / @horus_works Facebook (Like): / horusworx Twitter (Follow): / horus_works Instagram (Follow): / horus_works
Disclaimer: This video is made to entertain and guide you only. These techniques are not intended to be certified and professional instructions backed by any type of warranty. I hope you’ve learnt something new by watching this video. Please note however that you are solely responsible for trying any techniques displayed in this video. Please follow proper safety practices and understand that this channel is not responsible for any damage caused to you or your property when following along with the channel’s content.

Авто/Мото

Опубликовано:

4 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@per-arnepalm7396 Год назад

Very good, clear and well filmed video. You clearly show exactly how it is done and also which tools/sleeves you need. Calm. No stress. I like all your videos, same quality. Low music in the background! Good!

@Horus_Works Год назад

Thanks, I appreciate your support 👍

@andrewstable5551 7 дней назад

Thank you very much for your video, you have the gift to explain and make yourself understood, you make it look very simple, I will get a tool that I don't have like torque levers which definitely make the work super professional...again thank you very much and I will be attention to your other videos!!

@Horus_Works 3 дня назад

Thanks you my friend, I appreciate you commenting.... I hope you enjoy the rest of the videos ☺

@carstenpedersen3200 Год назад

Those front shocks are toast as well..

@flycorvus Год назад

In one of my previous workplace, the company had a Mazda B2200, a rusty old piece. That was fun to drive. RWD.. But I've never known there's a Ford version. Your one is a cool lowrider at the moment and getting better.

@Horus_Works Год назад

Yes this one was in bad shape too. I wanted to save it because they are fun to drive.

@JmanRx81 Год назад

Truck is looking really good! 👍🏻👍🏻

@Horus_Works Год назад

Thanks Josh!

@paultrow383 Год назад

Really helpful and well presented. Thanks mate

@Horus_Works Год назад

Thanks Paul, glad to see that the vid is proving useful 👍

@ndumisodube76 Год назад

Cant wait fr the steering rebuilding

@gavin8677 11 месяцев назад

Liked and subscribed. Have the same Ute. Mine not as nice as yours. Thx for the vid. You make it look simple for a wannabe weekend mechanic like me 😂

@Horus_Works 11 месяцев назад

That's all I am too mate - I just want to show people that working on a car can be rewarding and not that hard. I appreciate you being here 👍

@gavin8677 11 месяцев назад

Look forward to mazda/ford courier vidz. Great job

@lyndellfazekas1839 Год назад

Love this truck. Definitely looks better. Great improvements!

@Horus_Works Год назад

Thanks!

@markholyoak9790 Год назад

I love The truck you have i'm from UK by the way

@Horus_Works Год назад

Thanks Mark, it's been a labour of love. I must admit that I get a lot of thumps-up from tradies on the street.

@nik557 Год назад

Any knowledge on removing and replacing the upper control arm bushes ?

@Swanston33 Год назад

Awesome video bud! I want to replace all the bushings on my 2001 Ford focus estate and this video definitely gives me an idea of what to expect! Best wishes to you and the family from Devon in the UK

@Horus_Works Год назад

Glad you liked it mate, and I appreciate you saying so. All the best to you and yours Devon.

@seveng86sg 5 месяцев назад

Is the jack holding up control arm

@per-arnepalm7396 Год назад

Hello, I watched this video again and noticed that you have a nice bed on the car. Is it Raptor or anything like it or is it the "plastic bed"? (I can't find the right expression fpr it) I would like to replace all my bushings in the front axle on my 1980 Mazda B 1800 Pickup but with drum brakes. Hope it's as easy.

@Horus_Works Год назад

Hi mate, make sure you check out my other minitruck videos here: ru-vid.com/group/PLof3-wBOirGHtUzwbXiPifRSqnJco9Mu_ In Part 7, I show what I used for the bed liner, and how I did the job, thanks for watching 😀

@javilin197 Год назад

Fantástico

@Horus_Works Год назад

Muito obrigado, meu amigo.

@snoopfobz 21 день назад

Hi mate where do i find the specs for torque specs etc ???? Any website? For a ford courier 2003

@Horus_Works 20 дней назад

Hey mate, I found this online for my Courier a while back (the Mazda B2200 is the same car): mazdafanclub.com/download/b2200_1992.pdf This won't suit you though I don't think, but have a hunt in the forums and on eBay for a cheap factory repair manual. Some people have even scanned and PDFd these... good luck 👍

@tamawilliamson5987 Год назад

Hey mate love the vid ❤ your series have inspired me to buy one of these puppies. I was wondering how you can add more power to these cars. How much power can they push?

@Horus_Works Год назад

Awesome mate, glad to see I'm being a good influence on people haha If you want more power out of the 2.2 you will need to rebuild the bottom and top end, and either go high compression (NA) or Turbo/EFI. Both expensive options, and what people tend to do instead is either swap in an FE engine from a 2003 Kia and turbo that instead, or go V8 - either 5.0 Ford or Chev LS have been done countless times. Hope that helps you get the ball rolling 😉 If you do this though, factor in better brakes and suspension. The factory setup won't handle the extra power very well. It can and has been done, but not cheap.

@marty3469 Год назад

Your mini truck is looking good, I was going to say to viewers to be careful of eBay stuff, especially the bolts which come with balljoints , they're made of chinesium and snap while torquing down. My courier needed every bush, joint, and steering Pitman, idler arms which was a fun job !! Where did the front bib come from ? Great vid 👍

@Horus_Works Год назад

Thanks Marty, this one is in similar shape - needed quite a few steering issues sorting out but getting there. It's a fun project. I've just got a rubber front lip extension on the front bar.

@crazygoosegarage9586 Год назад

Nice work legend, been waiting on an update on this awesome little truck. I used super pro on the underside of my courier. Trying to post a link for some really good shocks but yt won’t let me 😅 Keep on truckin legend

@Horus_Works Год назад

Thanks mate, I appreciate it 👍 What were the shocks called?

@crazygoosegarage9586 Год назад

Heya buddy, they are 4 FORD COURIER PC PD 2WD FRONT & REAR SHOCK ABSORBERS 85-99 HEAVY DUTY From adaautopart They are a yellow picture but the shocks are black

@crazygoosegarage9586 Год назад

@@Horus_Works finally uploaded my first video, go check out my truck and follow for the build 😊

@Horus_Works Год назад

@Crazy Goose Garage love it mate!! Well done and let the fun begin! Love the hood struts... You have by sub and hope to see more content soon 😀👍

@crazygoosegarage9586 Год назад

@@Horus_Works thank you, yeah the hood struts are a god sent 😂, the amount of times I lift the bonnet, definitely saves time. I’m going to make it go more vertical later on

@wendelleriste9698 Год назад

Where did you purchase your wheels been have trouble finding wheel for my mazda.

@Horus_Works Год назад

Hey Wendel, I got them used locally. But they are Lenso Road&Terrain RT7 17" The truck uses the very common 6 lug bolt pattern all trucks of these era use, so they are interchangeable. These wheels originally came off a Nissan.

@thecuss6817 6 месяцев назад

I've replaced tie rod ends and all ball joints on my 1988 B2200 and I did not remove the calipers for that.

@toobinventiv 6 месяцев назад

Yep, can be done.

@Horus_Works 6 месяцев назад

Fair point.

@manuelgarza3410 8 месяцев назад

What kind of rims and tires are those and where can I buy a set

@Horus_Works 8 месяцев назад

Hi Manuel, they are 17" Lenso Road&Terrain RT7 - I got them locally in Australia, but do a search online to see who sells them in your area.

@manuelgarza3410 8 месяцев назад

@@Horus_Works thank you I found some not sure on the offset on the rims

@ndumisodube76 Год назад

I wish l can send my truck to you

@Horus_Works Год назад

Just follow the videos, and you can have the same 😀👍

@user-jz7gg9zi3t Год назад

Kia ora bro, my name is George and I am wanting some help getting parts for my B2200. I'm really struggling, if you receive this message would appreciate the help

@Horus_Works Год назад

Hi George, the best place I found for parts is rockauto.com - it's in the USA but their parts are often the cheapest - even with shipping. Past that, eBay is your best bet. I've had several items posted to me from overseas. I hope that helps you mate. Appreciate you watching 👍

@user-jz7gg9zi3t Год назад

Cheers my friend that's helped me a lot. I appreciate your help, your vids are awsum, take care, see you on the next vid👍