Ballistic face Shield from China 

It’s captain chinesium!

Chinesium Carwindows Carl

It’s funny because one of the Chinese news outlets mistranslated the rank of an American army captain spokesperson into “Captain America”. And the guy actually looked a little like Captain America lol

We all know it's you DemoMatt.

@@tlshortyshorty5810 I audibly kek'd. Well played fellow /k/ommando. 👍

The level 4 standalone plate also did great - video coming soon

Demo ranch has video on chinesium armour in form of solid steel plates - while heavy and primitive they still provide bullet stoping capabilities.

@@PolenarTactical yes, armor plates from china may not be as good as top tier US Socom plates, but they cost less than a tenth and do really well, stopping A LOT of different calibers. Allready hyped for your test video!

@@kamiskub7409 they have ceramic armor as well. Which is pretty good and insanely good for the price point.

Talfladermouse had some plastic plates of differing thicknesses that they descibed as motherboards, which performed quite well.

I watched a video of the “steel m88 helmet” tested It didn’t stop any rifle rounds and most of the pistols deformed it pretty good, the guy was like “this Chinese junk will get you killed!!” All pissed off like and I thought to myself If I was in a trench or foxhole or even in the bush… it wouldn’t stop or save me from direct hits, but it would do a very solid job at defeating shrapnel and falling debris and even shots from extreme angles… way I figure it is, it’s better than being butt naked with nothing protecting your head, I might even buy a few because of that, it would be like the Brodie helmet, not fantastic in combat but it would be a fantastic trench helmet, most injuries in trenches are from sniper fire, ricochets, and falling debris, it could save tons of lives, and if everyone’s naked, now everyone has atleast some kind of head protection I didn’t comment on the dudes video because of how much hate he had for it, I think he was just jealous the Chinese made a helmet available for 80$….

@@kyleminks6374 saw brandon hererra shooting the russian cold war steel helm and it blocked a 9x39mm round to the forehead.

Basically gta online

Or if u absolutely need to clear inside of a building… aim with ur laser and a 3A face shield will absolutely save ur life. GIGN doesn’t use them cause they look cool…

Hell I'd even take the weaker one they tested over nothing, if it stops birdshot then it will probably stop a decent amount of shrapnel too

That laser focus provides at least -300 ft/lbs of energy per shot. The bullets are just too intimidated.

It is also the intimidation factor, he could not aim correctly because of the googly eyes.

Exactly, this is a perfect explanation.

Yes and the most important thing is to tell the seller exactly what u want and ask them to choose for u. Especially when it comes to stuff like this, no one wants their customers to be dead that’s just bad for business 😂

Stop cheating in every videogame and maybe I'll be less suspicious of you.

They shoot super nice but they don't like full 10 round magazines being slammed on a closed bolt. When i got mine i wasn't used to 1911 specifics and problems and had to learn about it :D

Wish they had them in the US. Only Schcmeisser stuff I’ve ever seen so the 60 round stanag pattern magazines.

@@PolenarTactical what would you say about 45 version though?

Welcome to the channel! This is great feedback for us since we are constantly trying to improve our videos. We were actually talking about this - how to make videos interesting and fast paced by removing all the unnecessary footage. Im glad that it has worked :)

@@PolenarTactical keep going!

With horror 😆

What a cool round, right? It's like it had the concept of the PDW style round (bottle necked pistol length, velocity matters) down way ahead of its time. The Tokarev is such an impractical, weird looking, but in an appealing way, pistol too. TT and PPSh vs FN 5.7 and P90! :D

@@doctormixup5388 Yup! And diverse in use! I also want to rechamber a .308 levergun in it because of how cheap it'd be. Well, I did before, you know, kid-sniffer put the embargo. It'd also work great for any medium game and defense against most predators.

Norinco P762 is a p226 platform with 7.62x25, very interesting piece.

@@voidoli212 Well hot damn, thanks!

@@intellectualiconoclasm3264 No prob, not many reviews on youtube about it, also known as norinco px3, more video made by pakistanians.

Yeah you need 300Meters shots with that thing:)

hahaha, that should be the clickbait title :D

Those parts are actually plastic which makes it even worse. An aluminum mounting system would be way better with the option of adjusting the position of the visor

Own one of those myself and can confirm that the plastic rail mounts do indeed flop like that out of the box. The issue with flop and how low it sits can be resolved by pushing it further back against the helmet and tightening the screws on the side. Basically you won't be able to raise it easily like it's supposed to but it actually works pretty well if you set it and leave it alone.

Thank you! We are working on getting a better slow motion camera for projects like this one

@Zed Kay true 😅

Thank you 🤗

Thank you! Will do!

Thanks!

Glad you like it :)

basically UHMWPE

We also tested the helmet and level 4 ballistic plates - videos coming soon :)

He tested one 5 years ago on a $100 lvl IV ceramic/poly plate from Aliexpress, you can search for the vid. That thing was eating multiple full power 7.62x54r rounds from a Mosin like no tomorrow even after the ceramic had been blown away leaving just the poly backing taking full hits, it was insane. I can only imagine what their newest plates would be like.

We have tested the helmet and level 4 plates - videos coming soon to our channel :)

Respect! I almost forgot about that video :D

We tested it after the visor. It stops the rounds but the backface deformation is way too big

Sorry if this might be out of context a bit

Glad you enjoyed it

Don't you mean polyethilene?

Sounds interesting but most handgun rounds have relatively fast burning powder and small case capacity (especially .25 ACP) so that means that after 5" of barrel you are not gaining much more velocity. But it would be interesting to see this tested with 7.62x25mm as it has way more powder than it can burn in a short handgun barrel - as nicely shown by the flame explosion at the muzzle :D

Thank you! 🙂

No, but we could if there is interest

@@PolenarTactical I would be interested! Are they tires filled with sand/dirt on the sides?

@@PolenarTactical I know I have interest, but I'm not sure if it's everyone's cup of tea. It's a little loud, but that's a given with indoor ranges. Thanks for creating rumble account, btw. You need to use your "referral" link to get people to sign up to rumble from RU-vid. It also gives you 5% of any earnings they make on content (out of rumbles pocket, not the creators cut). I'm trying to convince the whole pewtube community to migrate over & run teaser videos on RU-vid then link to rumble for the full uncensored content & maybe join locals for "behind the scenes". I think it will be better for the movement as a whole to help build loyal fan base that watches on alternative platforms that actually *pay* their creators.

@@PolenarTactical you should ask this instead: who **wouldn't** have interest? :D Please do it

@@PolenarTactical Da, da!

Thanks! That's the Alpha Tactical Jacket from Helikon and we have it in our webstore. If you like it, wait a couple of days when we have the black friday sales and get it 20% off :) polenartactical.com/shop/jackets/1758-alpha-tactical-jacket-grid-fleece-helikon-tex.html?fbclid=IwAR2iYVcgjXMxrFkajSvuzRJpUdP8PuZKb7F6q355acFrFhBbOYXG_6kjU7g

We have tested it after the face shield, videos coming soon to our channel!

Depending on the eye relief you should be able to see straight through even if you don't get the best cheek weld. Real question is if you can get some NVGs which can be properly used over the face shield.

The XRG round was a solid copper bullet

No, it's the Zastava M57 chambered in 7.62x25mm

I know, right? :)

@@PolenarTactical Manca and Ziga sitting in a tree…. K.. I.. S.. S.. I.. N.. G 😘😘😘

Maybe we should do more content with it

Absolutely 🔥

@@PolenarTactical If you do, and if you have a 3d-printer, there's a LOT of really cool attachments and mods that people have made for the Little Badger

How are people still impressed by 22 lr

@@PumpkinsAmongUs yes, im listening...

Already did, video coming soon :)

Damn it! I wish i thought about it. That would be interesting to test since 5.45 from that short of a barrel doesnt have much energy

@@PolenarTactical I say it would go through both the face shield and the back of the helmet. :-)

@@kmieciu4ever back of the helmet would probably stop it

We haven't tested the Ace Link but after filming this video we tested the helmet you see here. It's also from China and it's made out of UHMWPE. Nice and light and it did stop everything but even the 9x19mm round made too much backface deformation for my comfort. I would NOT recommend ballistic helmets made in China unless someone has tested the thoroughly.

edit - just checked their website and one of the helmets that have looks identical to the one we have tested :/

@@PolenarTactical That being said, using helmets for protection from pistol rounds is a very police-specific application. Shrapnel test projectiles are usually closer to certain .22 WMR loads or certain buckshot projectiles aka. lighter but faster than 9mm. In those cases backface deformation is less of a concern, if it stops it it stops it.

@@hjorturerlend Not true, the majority of modern helmets are rated at excess of NIJ level IIIA which should also include maximum allowed backfave deformation

So, your cheap face shield stopped the rounds without any damage to your million-dollar smile, but the one that hit the helmet gave you a depressed skull fracture that flatlined you before the EMTs could get you to a trauma center. Oh, and I forgot, the face shield partly dismounted after stopping the first round, so your orthodontist and orthognathic and plastic surgeons are now in deep mourning, because if it hadn't been for that dished-in skull...