Тёмный

Barricade 9500lb Synthetic Winch Install - Extreme Terrain 

o3djeeps
Подписаться 45 тыс.
Просмотров 133 тыс.
50% 1

🔔 Please CLICK THE BELL if you want to see my videos! 🔔
[ OVERCLOCK3D Jeeps | o3djeeps.com ]
Barricade 9500lb Winch w/ Synthetic Rope & Wireless Control Installation
www.extremeterrain.com/barrica...
PRODUCT FEATURES
Wireless remote control winch
9,500 lb. single-line pulling capacity
5.5 hp, 12 volt, series wound motor
3 stage planetary gear with a 195.4:1 ratio
Full load line speed is 6.4 feet per minute
94 Foot synthetic rope
Weighs 58 lbs
Black powder coat finish
Optional wired remote use
Includes hawse fairlead
Limited lifetime warranty
Remote Control. Don't hit the trail unprepared, make sure your Wrangler is equipped with Barricade Off-Road's Wireless 9500lb Winch w/Synthetic Rope. This winch gives you even more safety and security when recovering from the roughest of spots. Stand back and take control with a wireless remote keeping you and other's out of harms way.
Winch Specs. The Barricade Off-Road 9500lb Winch is driven by a powerful 5.5 HP series-wound 12-volt electric motor and features a rugged 3-stage planetary gear box with a 195.4:1 gear ratio to provide 9500lbs of pulling power to get you out of the messiest situations. Matched with the two-way automatic, in-the-drum braking system you know you can always rely on this winch to hold your rig.
Accessories. This winch comes with a 94 foot bright orange synthetic rope, a hook, wireless remote control, a remote control on a 12 foot lead, a winch cover and a 4-way aluminum hawse fairlead.
Application. This winch requires a battery with a minimum of 650 cold cranking amps to operate properly. Installs with a standard mounting footprint of 10 by 4.5 inches on all 1987 - 2015 YJ, TJ, and JK Wranglers.
Please note: To prevent damages to the synthetic rope from sun and weather this winch requires using the included cover when not in use.
Manufacturer Part Number (MPN):
J101798
Some helpful O3D Jeeps links for you:
Most Recent Upload : goo.gl/z2AFkB
Most Popular Upload : goo.gl/y6bCWo
Check out my Channel : goo.gl/t8crvN

Авто/Мото

Опубликовано:

 

21 сен 2015

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 109   
@patrickkirkes8360
@patrickkirkes8360 8 лет назад
Thanks for the vids on both the bumper and winch install. Both my Barricade bumper and winch arrived today from ExtremeTerrain and your videos look to give me everything I need to install this weekend. Thanks again.
@vics7961
@vics7961 2 года назад
I've watched a couple of your videos now and greatly appreciate them! Great step by step!
@Airkoay
@Airkoay 7 лет назад
This is one of the best instructional video for setting up bumper and winch combo from the makers of Extreme Terrain. Thanks for sharing brother, my last JKU I had the winch setup the hard way. Now I've picked up my new 2017 JKU and will surely follow your steps.
@jetcarddude
@jetcarddude 7 лет назад
Followed your direction on mounting with winch and it came out great, thanks for the info.
@GroundPounder
@GroundPounder 7 лет назад
Very articulate. No rambling. Just the info you need. I watched the trailforce front bumper and winch video to prepare for my installs. Gotta go get some plastic conduit, that's a great idea. Very clean installs.
@dennisc8664
@dennisc8664 6 лет назад
Great tutorial, thanks! The extra protection on the power lead cable is a good thing and I'll be doing that as well. I've noticed in a couple of your vids you do a great job protecting the wire bundles. It's always a good idea to use dielectric grease to the electrical connections.
@clydevasey2241
@clydevasey2241 8 лет назад
Great Video man, wife just got me a 2016 and you have made my decision to get the Barricade over the AEV very easy. Very affordable and easy to do on our own. Thank you so much!!!
@tde1970justreal
@tde1970justreal 8 лет назад
I just bought this same bumper and winch setup from Extreme Terrain. Appreciate the videos, man! You saved me some time! My fog light harness just barely fit. It has a little bit of tension on it. Will check it after a few days and relieve some more wire, if necessary.
@JoeSmith-gp5dm
@JoeSmith-gp5dm 8 лет назад
I love this set up I've been looking at this bumper for a while
@trackstar1able
@trackstar1able 8 лет назад
Good job man you explain everything perfect and you make it seem easy which is good. I subscribed so keep on making great videos
@Orod_
@Orod_ 4 года назад
Thankyou from the bottom of my heart this helped me immensely !
@dalerpritchett
@dalerpritchett 8 лет назад
Excellent! Very helpful video. I am in the middle of the project for both the Barricade Trail Force HD Bumper and Barricade Winch. The details you provide are very useful. The only change I made was to extend the Fog lights cable to put less stress on reach. I especially like the fact you name your wrenches as you go.
@bobbyshah5743
@bobbyshah5743 7 лет назад
Excellent presentation. Direct, complete, thorough, well done....
@GLOCKCOPG23
@GLOCKCOPG23 8 лет назад
Very neat and professional looking job. Good work! Thanks for the very informative tutorial. Take care brother.
@remingtonkevin65
@remingtonkevin65 7 лет назад
Installed! Thanks for the video.
@Gr1dSh7ftR
@Gr1dSh7ftR 7 лет назад
Great video man. I'm a new Jeep owner and this helped me out A LOT! Thanks again!
@nathanpinho9877
@nathanpinho9877 7 лет назад
Matt Mondon
@cfor722
@cfor722 8 лет назад
Outstanding videos! Thank you.
@eyelikehurdles
@eyelikehurdles 8 лет назад
thanks, not a lot of videos showing where to run the cables through and around to connect to the battery, as well as not to use those middle ones. Was really helpful!
@anibalbabilonia1867
@anibalbabilonia1867 4 года назад
That will be my future proyect! I own a 2015 Jeep willys wheeler baja yellow, and i want the same kind of bumper and winch!👌😎👍great job!
@Jonc85
@Jonc85 Год назад
Very useful help, thank you.
@bigbo1865
@bigbo1865 5 лет назад
Between the grille inserts and the airflow disruption from the winch itself you're going to want to put some heat distribution louvers in that hood. Believe me. Especially if you plan on towing something of any weight over a mountain pass. If you have big oversized tires & are horsepower deprived it's going to overheat from even minimal air flow issues. If you're not towing anything of any weight and you're running normal tires should be fine & have absolutely no problems..!!! Great how to..in depth video & very informative. Great job my brother..!!! Clicking subscribe.
@ssaladino1998
@ssaladino1998 7 лет назад
I see you upgraded from the BMW. great vids as always!
@rockod8880
@rockod8880 2 года назад
Great video
@blamtheman
@blamtheman 7 лет назад
Great video man. Extreme Terrain should pay you for all your tutorials.
@nazerbisnar6012
@nazerbisnar6012 6 лет назад
very detailed thanks for the video.
@invidious07
@invidious07 7 лет назад
For UV protection I recommend wrapping the end of the the rope that sticks out the front with tape, i used Gaffer Tape that I found on amazon which has held up really well. For now I am also using a cover but i plan to cut some sheet metal to cover up just the spool. I wish they made some kind of plastic cover that you could just snap on.
@caliarmyguy
@caliarmyguy 7 лет назад
Awesome video
@batty505
@batty505 7 лет назад
Great vid, thanks.
@440CRF250x
@440CRF250x 8 лет назад
Awesome videos man!
@o3djeeps
@o3djeeps 8 лет назад
+dasmoose fourfourzero (dasmoose440) Thank you!
@bigwilly8746
@bigwilly8746 8 лет назад
good stuff man
@Bcharns
@Bcharns 4 года назад
Great video thanks for posting. It's been a few years, how's the winch holding up?
@Varge30
@Varge30 7 лет назад
I enjoy the way you installation of your winch on the bumper. I have the same bumper as you. Did you use wire loom on both cables? If you did use wire loom, you only tape at both ends, not the hold cable. But that is my choice. I did install inline a 30amp fuse holder on the positive side cable. When you install the fuse holder, solder it. Do not crimp inline, you will less chance of failure.
@doublecheeseburger1712
@doublecheeseburger1712 7 лет назад
Great video..... one question ,can't you just run the ground cable straight to the bumper or frame to avoid extra wires on battery, since it should be a good ground through chassis?
@OMACMedicFiveZero
@OMACMedicFiveZero 7 лет назад
Nice clean install, random question! What watch is that?
@christoffer1973
@christoffer1973 7 лет назад
Love your videos. Isn't it smart to rewire the winch whit some load after installing. What do you think? that you spol out all the rope/wire and have your car in a small slope in natural gear. And then use your car as load to wire in /preloaded the rope/wire. Hope you understand what I ment. love your channel watch your videos a few times now
@pitbull62
@pitbull62 7 лет назад
Love your videos. Did you ever consider smittybilt 97495. Same price but more hp uses cable tho. Also what did u pay for ur winch. I really want rope vs cable. Appreciate any response.
@stevekline6648
@stevekline6648 8 лет назад
What LED bar do you have on your Barricade Trail Force HD front bumper? Great videos BTW!
@conradbernard6319
@conradbernard6319 6 лет назад
All your videos are great. Can you tell me the model number on the winch. The only one I pulled up with synthetic robe and wireless remote says it’s for an f-150
@schmonkeeshomky5386
@schmonkeeshomky5386 7 лет назад
If you opted out of having a rock guard, can you tell me why? I don't see the sleeve on your installed winch. I find it very helpful. Just curious why you don't use one.
@allXamericanXbadass
@allXamericanXbadass 7 лет назад
I noticed the chesapeake jeep club sticker on your windshield, do you live in chesapeake va?
@whampers77
@whampers77 7 лет назад
How did you mount your license plate? I saw on another video you had it on but it looks like it would cut the opening for the cable in half
@KevinCar-jx1jw
@KevinCar-jx1jw 6 лет назад
hows that winch holding up. wish I would've found your channel sooner.
@MrHarleyoldfart
@MrHarleyoldfart 5 лет назад
What happened to the original red positive cable from the solenoid box to the battery, it turned purple!
@johndez9398
@johndez9398 8 лет назад
What are he bumper bolt arrangements? I purchased the HD bumper but haven decided on a winch yet..... Can most any winch fit on the Barricade bumper? Are they mainly standard to mount on most bumpers?
@omarvaldez9977
@omarvaldez9977 7 лет назад
for the cover did you contact extreme terrain or barricade? I know extreme terrain sells it separately
@johnrastelli1724
@johnrastelli1724 8 лет назад
OSHA approved foot ware? 😬
@Spacesprocketz
@Spacesprocketz 7 лет назад
MD Jeepers!
@hartman4922
@hartman4922 8 лет назад
Thank you brother, very informative. lifting that bumper with the sandals was a b-hole tightener tho.........the toes!!!! ATB.....G
@kryer3602
@kryer3602 7 лет назад
I'm looking at adding this exact setup. Did you have to move the vacuum pump? I've heard different stories. I don't want to wait til I have the Jeep apart to realize I now have to order a vacuum relocation kit.
@savagecomanche
@savagecomanche 7 лет назад
sean tevlin depends on the bumper this one doesn't need it moved but some will
@wtpence4731
@wtpence4731 3 года назад
How thick is the winch mounting area ? No other plate ?
@JKTF476
@JKTF476 8 лет назад
Thanks for making this video. Would this set up be appropriate on a 4 door? Can a single person winch themselves out or do you need 2 people?
@o3djeeps
@o3djeeps 8 лет назад
Yes. Mine is a 4 door. You can winch yourself out of you have something to use as an anchor point: tree, etc
@JKTF476
@JKTF476 8 лет назад
Thank you much. I just bought my first jeep. A lot of good information on your channel. I noticed the barricade brand seems to offer good quality for price.
@camhemmerich8473
@camhemmerich8473 6 лет назад
I'm fully aware that this is more of a winch install video. I live in upstate NY where we receive a fair amount of snow. Does anyone notice rust after a few years? From all salt on the road? (If you live in similar winter conditions.) Looking to possibly purchase a barricade bumper like this. I know they are powered coated but still? My 2012 Jeep wrangler is my daily driving vehicle and don't use it for off road. Just looking to beef up my Wrangler but not sure if it would be worth the money if it were to rust due to salt like I mentioned. Feedback appreciated.
@GoproGuys99
@GoproGuys99 5 лет назад
is the control box fully water proof?
@conagherkasten4070
@conagherkasten4070 5 лет назад
Do a video of how it’s doing
@drewbrown464
@drewbrown464 7 лет назад
hey. i live in north delaware. was looking at joining a jeep club. i am assuming that you are from around here from the Chesapeake jeep club. let me know whenever you get a chance. thanks
@michealbranquinho2300
@michealbranquinho2300 7 лет назад
WHATS THE TIRE SIZE YOU RUNNING ON YOUR JEEP 305/70r17s?
@CYOTsNiper
@CYOTsNiper 6 лет назад
Does it have holes in the grill guard to run wires from mounted lights?
@o3djeeps
@o3djeeps 6 лет назад
No holes to run wires inside the bull bar. You could make them if you want... but I would just run along the back side.
@herrsnyder1505
@herrsnyder1505 8 лет назад
Where did you get the orange grill insert??
@o3djeeps
@o3djeeps 8 лет назад
DIY job from plastic gutter guard and orange spray paint.
@daviddawkins9669
@daviddawkins9669 6 лет назад
what brand of tires are those?
@MarkFisch
@MarkFisch 8 лет назад
Where did u get the red grill insert?
@o3djeeps
@o3djeeps 8 лет назад
I made it. :-) it's plastic gutter guard. You can find several decent videos on the process.
@hondbob9263
@hondbob9263 8 лет назад
Is iT waterproof
@sgtnocasiousmc
@sgtnocasiousmc 7 лет назад
What kind of time piece are you wearing? Is that a Garmin?
@o3djeeps
@o3djeeps 7 лет назад
Suunto Core All Black
@trevorpool6822
@trevorpool6822 8 лет назад
What kind of battery connectors are you using I have been looking for a set with multiple bolts to tie my lights into. What brand are they ?
@trevorpool6822
@trevorpool6822 8 лет назад
The battery terminals
@o3djeeps
@o3djeeps 8 лет назад
+Trevor Pool It's just stock Jeep terminals.
@trevorpool6822
@trevorpool6822 8 лет назад
+OVERCLOCK3D - CPO Well I have a 2005 Jeep Wrangler and the terminals are in bad shape and I am wanting to get new ones that I can hook my new barricade winch to.
@Audel-bedolla7
@Audel-bedolla7 8 лет назад
What did you use on your other videos on the winch rope that hangs out its like a ball and it's all the way in did you wraps the end of the rope with something
@o3djeeps
@o3djeeps 8 лет назад
It's a Kong ball. Soon however it will be replaced with a Factor55 ProLink
@Audel-bedolla7
@Audel-bedolla7 8 лет назад
+OVERCLOCK3D - JKU is the end of the rope just orange or did you apply something to protect the end of it?
@o3djeeps
@o3djeeps 8 лет назад
+Audel Bedoll the rope itself is orange.
@Audel-bedolla7
@Audel-bedolla7 8 лет назад
+OVERCLOCK3D - JKU So nothing to protect the end? Did your ever fade away? I have my fading away the orange color is
@Audel-bedolla7
@Audel-bedolla7 8 лет назад
+OVERCLOCK3D - JKU have you had that issue
@rustyengland1465
@rustyengland1465 8 лет назад
Are you still pleased with the winch? I'm looking at buying this winch and want an honest feedback.
@o3djeeps
@o3djeeps 8 лет назад
Very. It's never let me down. If you check out my channel and search for "insurance" and then again for "pull-pal" and then for "water crossing" - you'll find 3 vids of the winch in action. I've used it more that that of course, but those ended up in videos.
@rustyengland1465
@rustyengland1465 8 лет назад
+OVERCLOCK3D - CPO I'm convinced. Thanks for the reply and as always great videos!
@m998hmmwv7
@m998hmmwv7 7 лет назад
Don't anyone believe in using locktight? And a dab of dielectric grease on the terminals. .
@maheinicke
@maheinicke 7 лет назад
Dean Labella I use No-Alox on everything, just don't get it on your fingers! lol
@dennisc8664
@dennisc8664 6 лет назад
That was two of my thoughts as well. Never install electrical connections or light bulbs without dielectric grease if you want to avoid issues later.
@Kennykoo65
@Kennykoo65 5 лет назад
Agreed...but then all of the youtubers making videos of removing corroded, rusted bolts and nuts would be out of a job.
@brandonbair
@brandonbair 8 лет назад
What made you go with synthetic?
@o3djeeps
@o3djeeps 8 лет назад
+brandonbair Light weight, safer, easier to handle. That's it really. Everyone I spoke with about winches seems to think that synthetic is the way to go these days. The ropes are stronger (in many cases) than the steel equivalents...but don't hold energy - so if they break the risk of injury is much less. They have a bit of a maintenance requirement...but if you use the cover...then pretty much everything is covered (literally). lol
@schmonkeeshomky5386
@schmonkeeshomky5386 7 лет назад
OVERCLOCK3D - CPO exactly why I chose synthetic. Sucks that the sun reduces their strength advantage so quick. Synthetic loses like 20% of its strength from sun burn/dry out in about 1 year. Replacing the winch "cable" is required way more often when you go with synthetic (for safety).
@schmonkeeshomky5386
@schmonkeeshomky5386 7 лет назад
OVERCLOCK3D - CPO exactly why I chose synthetic. Sucks that the sun reduces their strength advantage so quick. Synthetic loses like 20% of its strength from sun burn/dry out in about 1 year. Replacing the winch "cable" is required way more often when you go with synthetic (for safety).
@justinmetcalfe2669
@justinmetcalfe2669 8 лет назад
is that a carbon 6 ring?
@o3djeeps
@o3djeeps 8 лет назад
+Justin Metcalfe No...its silicone, from Qalo
@justinmetcalfe2669
@justinmetcalfe2669 8 лет назад
Gotcha, just kind of looked like mine lol kinda wish I hadn't left Baltimore, would've been cool to wheel with ya
@JD-lt1kx
@JD-lt1kx 3 года назад
I would have used red electrical tape so anyone working on my Jeep would know that's a hot wire. Otherwise a great video.
@richardspengler1794
@richardspengler1794 Год назад
I really understand idiots that do mechanic work in flip flops!
@Mrn951951
@Mrn951951 7 лет назад
Heard their bumpers suck and rust after a year
@o3djeeps
@o3djeeps 7 лет назад
If you don't take care of them... they will rust in a heartbeat. The key is to keep up on scratches and chips in the powdercoat.
@Mrn951951
@Mrn951951 7 лет назад
OVERCLOCK3D - CPO I just heard a lot of reviews saying the powder coat is really thin. I just went with a smittybuilt src for like 100$ more.
@o3djeeps
@o3djeeps 7 лет назад
That's a true statement. That's why you have to keep up with them. I use a rattle can of spray on bedliner to touch them up from time to time!
@M70ACARRY
@M70ACARRY 8 лет назад
That power lead needs to be fused.
@erikaslt
@erikaslt 7 лет назад
M70ACARRY yes and no.
@neverfnquit
@neverfnquit 7 лет назад
Yeah it does. That's a huge fire hazard. That's what I came here to comment.
@GrizOnTheTrail
@GrizOnTheTrail 5 лет назад
What amp fuze is should be used?
@marypoppins9596
@marypoppins9596 7 лет назад
If a person trying to steal your winch was smart enough they would just pull the whole bumper since it's so easy to take off
@edward1730
@edward1730 2 года назад
How can anyone take videos seriously from a man wearing sandals doing a mechanical install?
Далее
На чем играют ПРО | Standoff 2
07:25
Просмотров 310 тыс.
Bumper and Winch Install On My Jeep Gladiator!
22:22
Просмотров 129 тыс.
Winching techniques beginners to Advanced
15:11
Просмотров 1,1 млн
Попрошайка на BMW😅 #shorts
0:42
Просмотров 5 млн