Battle in Bama and Cotten blows it up 

The "this damn squarebody burnout went on for so damn long, I had to show you some some other rides so you wouldn't go to sleep" breaks had me in stitches! Great vid as always.

You and your son have a great relationship, it's fun to watch. I love to hear him talk with his southern accent too. Big fan of the channel. Best of luck. Take Care!!!

Mike "Rod knock" Cotten 😂

The Tahoe sound's like Christine when Arnie pulled into Darnel's Do It Yourself Garage

Cotton is the man. I'd be lucky to have him as a friend. Keep up the great work.

Pinstriping on a blower belt 🤣. Gotta love that.

The gambler wheels on the Tahoe really took me back to the 90s. Cool video

You guys are great together.

Love the cutaways from the Hondo truck 😂😂😂😂

Dude!!! Great video!!! I love watching you and Cotton together!!! Sounds like he's hydro locking a cylinder!!??

Hey. Love that you have brought your boy up well and for all the metalhead in him...The second he saw that waterfall he was mesmerised. Good work Dave and Brandon.

So many people don't realize how much time and money goes into some of these cars. Since I started some of my projects, I tip my hat to some of these builds. The craftsmanship is on point!

I started using RainX around 1990 in Germany. I could drive the Autobahn in the rain with the wipers shut off, excellent stuff.

I love the stepside at the end of the video 😍

Legend says hondo is still there doing the same burnout.

Burnout contest sitting still is boring, I had an 86 square body with a 406 small block and 700r4 that would smoke the rear tires for a quarter mile at any time , drove it daily , loved it , but someone made me an offer that couldn't refuse , i guess they loved it more than me , lol

I'm racking my brain trying to figure out how Tony Angelo broke Mike Cotten's Tahoe.

26:18 we need those engine in my school bus lol

Had a set of those champ 500 on my 80 cutlass back in the day,memories.

Saludos from Puerto Rico U.S.A.

Hi from Australia….Your burnouts are cute.

Hey Dave give Dan the hood for his Bricklin. He won't quit pissin and moanin about it.

The show looked like a great time. Definitely ready to see what you guys figure out what went wrong with Cotten's ride. #poorcotten😂

Love the old champ 500 centerlines

Another great video 👍👍

Definitely gonna keep this event in mind

Fin would have loved those mini trucks keep doing what you're doing much love from New Zealand guy's

I am with you on the value of Rain-X (worth it's weight in gold, since one bottle will last a lifetime). However, that is not the correct way to apply the stuff. (Clean your windows first, which you did.) Take a quality paper towel or disposable shop rag and fold it over and over into a little square maybe 2" x 2" or so. Spray the Rain-X on the square and wipe your windows with it in a circular motion, partially overlapping your passes as you go so you don't miss anything. If the towel gets dry, give it a spritz, but you don't need much. By the time you get to the end of the glass, it should be starting to haze up. After a little while, take a microfiber towel and buff off all of the haze once it is good and hazy, just like waxing a car (if it smears, you didn't wait long enough). After a day, you may notice a few hazy spots you missed, so buff those out too. If it is your first application on that vehicle, you can do a second coat, but the law of diminishing returns definitely applies for each successive coat. Spraying a lot directly on the glass just wastes it.

All the smoke rolling out of that v w look like cheech and chong😂😂😂

Awesome video buddy

Love that Tahoe.

What a cool kid!

Watching those burnout competitions make me feel dumber than I really am. My favorite was the surging blower motor with the fake Big n Ugly being a turd was the best

Now that was a long burnout brings back street machine nationals memories. I need tha V-Dub bug that thing is awesome.

Vw waz cool , the coolest one I ever saw in person was mounted on a mid 60s Corvette frame that had been heavily modified and car had extra wide fenders

Smear some jelly on it Cotton, that thing's toast.

That's the steel plate style burnouts I competed in in the late 90's, early 2000's at the car craft summer cruise. That plate can really get hot and pull lower powered cars down. Sometimes we competed head to head. Good times but the Aussie style burnouts are so much more entertaining.

Min 10:48 😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍 All those mini trucks were sooooo sweet.

Miles been rolled back on that Tahoe

Love Cotten's 2wd 2 door blazer always wanted one of those wish I bought one long ago when they were still cheap last one I saw factory 2wd clean ride was 20k in Florida private seller

Swimming and fishing,thats whats up

Check the water temp sensor might be in limp mode does that if you can't read temp Gage will read still works but faulty signal sometimes coolant temp sensor can cause that lean idle it's usually sporadic throttle

i am beyond broke and even my trailer has a winch!!

Moooooore!!!

2door Tahoe is wicked

Driving in the rain with a blower is the ultimate water injection system, lol

Hey David newbern I watch all your videos and I love watching faster with newbern and cotten. I just was curious if you knew where any 57 or 55 chevys are for sale. Keep up the videos.

You saw the baddest burb on the planet. Josh Rowan

🤘😎🤘

It's a dump truck, you can take it to the dump 😂

I love little river canyon. I live 10 min from there

I know the guy who built the S10 Doolay. The dually fenders are actually s10 Stepside fenders for the upper part. It’s also got a LS under the hood. They musta been away at the moment in his wife’s truck “Stinky Pinky” it was in between his truck and that other S10.

Y'all in my neck of the woods little river canyon is on my to Scottsboro Alabama

Turn your scoop around backwards for driving in the rain...

Sounds like converters are clogged up

Better turn scoop around

I have been using Rainx for almost 20 years, Washer Fluid and Wipers. Folks think that I am full of mess until they ride with me, then they can't believe how well it works.

Blown Mafia contact them if you need new rotors for your blower they’ve got piles of them in the back room

It's really hard to beat the looks of champ 500 rims in my opinion

That is my buddy David Culpepper’s doolay s10.

Mike Cotton and his bad decisions, brought to you by Rain X

Great video , the burn outs were EPIC

Cotton better start thinking about an LS swap!

I tried rainex silicone wipers, now they are on all my vehicles.

Car windshields are porous, you can put a new edge on a bondo spreader by rubbing the edge on it

Cotten forgot to put oil in it after the last change. Happens to all of us.

that centrifugal super charger fed from fake injector hat blowing right back into injector hat then into roots blower..... smgdh?!

next time try (nu finish car polish) for your window that also works

It's just crossfire inside the vortec dist.cap....common.

My question when you're driving in the rain with a hood scoop and a blower, how does that work?

Sounds like an LS DOD dead on demand. I have people down there in Paducah and Metropolis right across the river.

Holy sh!t on that little VW bug

Send Dan's hood to him!

To all the Australians watching...I'm sorry thats the best we can do for a "Burnout" competition...

It sounds like the Rocker arm is either broke or the push rod wore threw the rocker arm .

Sounds like a rod knock.

Cotten they leave the light on

Hay everyone good Saturday morning with David 🔧🛠️🔨💥🪛💪🇺🇸 Remember everyone have Jesus Christ in your life ✝️🙏

Brother you need to start working on a ramp truck

Just think of the water going into the engine as nature's water injection system.

I don't understand the fascination of spending a lot of time and money on a car just to do burnouts. I'm 62 years old. I started street racing when I was 16 with a 69 SS 396 Chevelle, and I've had some pretty fast cars over the years, but this seems really boring to me, but we all have different interests, so if that's what some people enjoy doing, that's all that matters.

Man i get the patina look but you cant put a couole headlamp bulbs in?

#Cottenbrokeit

Sounds like it is full of diesel/gas mixture.

Calvert City

Uncle Rodney come a knockin?

Hey there! Are you interested in vehicle lighting stuff sponsor?

Feel like burnout contests are just a big middle finger to the idea of cutting back on pollution

Water injection . That will clean the carbon out. Basically

what about all the water going into the scoop? seems like this is bad for the carbs

Y'all poking fun at hondo

I know who owns the dually s10

Where can I get me a shirt like Cotten’s?

Just put wipers on.

okay, time to blow your minds. Glass is not a solid, it's a liquid - thus over time the glass at the bottom of the window will be thicker then the glass at the top. How does it relate? the comment about rainx filling the 'holes', that's where the holes come from.... Newer glass is not as liquid as older glass, but it's still a liquid not a solid.

13:00 WHY?

Yea that Tahoe is a no go. Yall just drop it off at my house and ill put this nice stroker i built for my bagged stepside. Then ill bag the Hoe and make it real nice.

15:35 why?

The red/white Bel Air with the triple 8/71 setup is the dumbest setup I've ever seen. Do they think they're gonna get triple the boost??? How about ten times the heat of the air at the intake ports? It would have lost ANY gains from boost by that point because of all the heat generated by compressing air over and over and over.