"BEAST" NEW Arrma OUTCAST 6s EXB RTR!!! Full overview, tips, and first Rip...

Подписаться 27 тыс.

Просмотров 67 тыс.

50% 1

SAY WHAT!!!! It's finally happened. HUGE props to ARRMA for offering the ultimate extreme stunt truck in ready to run form. Had an absolute Blast trying this sucker out this maiden bash. Aside from a cracked wing mount, I had a breakage free first outing. Good thing, because I had a migraine and forgot my damn tool box. Gotta love a dull headache in the heat...Lol. Loving this new truck!!! Planning to go open rear diff and make some slight tuning changes. Thanks to Horizon Hobby, M2C Racing, and Fast Track Hobbies in Rocklin, CA. Bash on my RC Brothers...

Опубликовано:

30 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 377

@richduperbash2966 3 года назад

If I haven't seen or replied to a comment or question, please don't take offense 🤗. On a road trip with family with spotty cell service. Loving this new EXB RTR 😍. Noticed after pulling the body I'd snapped my wingmount near the rear chassis brace. Aside from that, no breakages 💪. Good thing cuz I had a brain fade and forgot my damn tools 😝🤣🤣. Planning to tune and dial this sucker soon. Appreciate the comments, suggestions, and support 👍. Happy 4th of July!!!! 🍻😎💪👊👊

@jboymiller17 3 года назад

Can you make a video about setting droop?

@richduperbash2966 3 года назад

@@jboymiller17 I've covered it in previous vids 👍. The main thing is you should have to push the shock rod ends upwards a bit to fit the shocks onto the A arms (push in the set pin) with the car on a stand. The idea is to adjust the droop screws so they push against the chassis at full droop and take pressure off of the shock rod ends. 😎💪👊👊

@joevozzo1 Год назад

Sorry to ask again just want to check when I put 4s tyres on so I don't loose speed would it be worth it gearing up thanks for all your help

@richduperbash2966 Год назад

@@joevozzo1 no problem 👍. You generally want to go up 2 teeth on the pinion when going with the 4s Backflips. 🍻

@joevozzo1 Год назад

@@richduperbash2966 thanks

@TpPartsRcXtreme 3 года назад

Thank you dear brother for the huge shoutout, you are the inspiration for the whole bashing comunity brother 🥰. The Outcast looked super good, amazing. The bash looked solid as few, im gonna go to half on LSD what i normaly run, looks uo way to fast, and breaksloose.

@richduperbash2966 3 года назад

You bet dear Brother 😍. Shout-out well deserved 🤗. You've been such an influence in the ARRMA and entire RC community 🥰🥰. Always willing to help guys and steer them the right direction. Truly appreciate the kind words and friendship Thomas. Agreed on the LSD 👍. Going open rear diff soon. The ground was bone dry and slippery loose of course, but I think open fits my tastes better. 🍻🚀🚀😎💪👊👊

@CitationZac 3 года назад

Awesome video. I got out of bashing and have been racing for the last two years but this makes me want to bash again! That truck is the best looking RTR I've ever seen. It isn't quite where I had my last outcast but I wont have to drop tons of money in it when I get it like the last one. I love that big heatsink on the motor. A good fan and that bad boy will be ready to send! Great to see you're still out there doing this and making killer videos. Thanks Rich!

@averylooper5534 3 года назад

I LOVE this truck! 2 exbs in one day! Arrma just keeps getting better ! Awesome video. Thanks for Posting!

@restinpiecesrc5528 3 года назад

Only thing that would make them better is if they were using your m2c parts as the standard parts for exb models, im surprises they haven't tried doing some sort of co-op contract

@richduperbash2966 3 года назад

Thanks so much Brother Avery 😜!!!! Had a blast out there despite fighting a migraine 😝. Looking forward to putting some fine tuning on her. Thanks so very much for all you and your Dad do to push the hobby to the next level. Have a great 4th of July!!!! 🍻🚀🚀😎💪👊👊

@Basherqueen 3 года назад

My favorite rig as an EXB RTR 👍👍👍 that is awesome! Arrma nailed it again, what a beautiful rig with sooo many improvements. Best Review as always 😍😍😍

@richduperbash2966 3 года назад

Thanks so much Kimberly 😍. I think an EXB RTR is a great option 😱. The electronics feel super smooth too 👌. Just have to keep my motor temps a bit cooler. ARRMA did a great job here 🤗🚀🚀😎💪👊👊

@inspiredrc 3 года назад

Awsome rig!! Nice to see the right people getting the new release first! Great shake down run dude!!🤘😱

@richduperbash2966 3 года назад

Thanks so much Brother 😜. Really appreciate it. 🍻😎💪👊👊

@drrcstunt 3 года назад

I Love This Truck 😍🤘, thank you so much Rich for your supe unboxing, I really enjoyed it very much 😎👊, I also really like the outcast as' set, all the exb Parts are very interesting. Good test Brother, as always number 1🏆🤘🤘👊😎

@RCDUDE81 3 года назад

Perfect bench overview and maiden rip Brother Rich!!👊Absolutely love that Arrma decided to make the Outcast and Talion an EXB/RTR! So easy to just plug and send!😜Killer jumps and sweet frontie!! I feel the Outcast 6s has been put on the back burner with all these new rigs and 8s line. Glad to see the EXB version lighting the spark again! Great vid my friend!! Have a great 4th!😎🤘👊🍻🍻

@richduperbash2966 3 года назад

Thanks so much Brother Eric 😜. I had a migraine during the unboxing and maiden bash, but had a Blast testing her out anyways 😍. Stoked ARRMA decided to offer this EXB option 😱. The Talion looks absolutely sexy AF 👀🥰🥰🥰. Look forward to getting this sucker tuned soon. Dropping in the rear open 1.9mm shims after my trip. I prefer to whip the rear into turns personally 😉. The handling felt good overall out of the box though 👍. Appreciate the kind words as always Eric 🤗. Have a great 4th tomorrow!!!! 🍻🚀🚀😎💪👊👊

@X-KroLL 3 года назад

Great review! Love Arrma's initiative lately!!!! Glad they came up with a better bumper too.

@richduperbash2966 3 года назад

Thanks so much Brother 😜. I'm digging ARRMA's drive and progression 😍. This platform might not be perfect for everyone, but it's Killer to have different options. The bumper is awesome!!!! 🍻😎💪👊👊

@mystic6635 3 года назад

Looks like a beast! 😍 And gosh your control is on point! 😉👍

@ervinmedina9014 3 года назад

This will be my New Rig!!! I loved the look of the Black OK8's EXB roller. So glad they made the 6s version. Arrma is just Killing it! Great Rip Rich as always! Your driving is always on Point! Thanks for showing this new rig and can't wait for the adjustments you make to get it's full potential! Stay safe and bash on from Colorado!!!!

@richduperbash2966 3 года назад

Thanks so much Ervin 😜!!!! So stoked ARRMA is showing the O6s some EXB love 😍. The fact that it's RTR is just icing on the cake!!!! Can't wait to get back in town and dive into the tuning 👀. I'll definitely get her dialed to my liking next outing. 🍻😎💪👊👊

@jonk967 3 года назад

Man, I must have been sleeping, as I did not know they were coming out with this rig! I love it and need to find one! Great stuff as always!!

@CommanderAstigRC 3 года назад

Awesome Rich. Congrats Bro. No doubting Outcast is the most Fun exciting truck in it's platform. It's agility, speed and gymnastic ability in unmatched. It's legendary status goes way back and I'm glad Arrma is now in tune and true with their Bashing at heart CORE mentality. We are now starting to experience the future of Arrma trucks in EXB and it's only gonna get better from here. Awesome first Go with Outcast 6s RTR EXB Bro Rich.

@richduperbash2966 3 года назад

Thanks so much Brother Chris 😜!!!! So stoked to see the progression 😱. Yes.... she'll still get some M2C upgrades, but this is definitely a tough truck that will handle most bashing without issue 👍. ARRMA has come a long way since the original 06s in 2016 👀. Still such a blast to bash!!!! The platform will never get old. Can't wait to rip the skatepark with this sucker 😱🤣🤣. The EXB line is a direct result of basher's feedback and ARRMA's willingness to deliver what guys want. It's proof that they listen and respond. Such an awesome thing to see Bro. 🍻🤙🤙😎💪👊👊

@droningharry 3 года назад

Well they sent the right one to you Brother, I love this Truck!👍🏻 It's going to be no.6 in th Arrma stable. I was on the new Talion until I took a hard look at it, wow it perfect and the run you gave it convinced me for sure. Looking forward to more with it. Congrats to Arrma for putting out RTR EXB's. They just keep stepping up the game😁😁✌🏼✌🏼✌🏼🤟🏻🤟🏻🤟🏻

@colinsunday9149 2 года назад

I like you're chill attitude and way to present these videos well done budy great video to

@patrickbenninger6753 2 года назад

Came to watch this video again- man this is a great truck 🛻

@shawnrossi6364 3 года назад

Hell yeah God footage as always! Thanks arrma for the sneak peak!

@richduperbash2966 3 года назад

Thanks so much Shawn 🤗. Bash on Brother 🍻😎💪👊👊

@josephlowden9495 2 года назад

Again, nice video. I’m going to use your advice you gave on motor mount bolts. I’ve stripped a few on my kraton exb. I only ran my exb outcast one time . The ESC is acting funny. So once I get a new one in and the warm weather comes, I can’t wait to have some fun. By far my favorite looking truck! I can’t wait to get his big brother as well! As you can tell, I’m super deep into the hobby. I love it. I’m going to take my rigs and driving to the next level this year. I love every aspect of the hobby

@easternrc1924 3 года назад

She looks sick mate, congrats on the new truck. Great video as always broski, Arrma coming through with the goods!

@richduperbash2966 3 года назад

Thanks so much Brother Ed 🤗. Absolutely stoked to get this new rig 😱. She'll be nice and dialed next time out 👌. Just needs a little garage tuning love. 🍻😎💪👊👊

@jumpmasterrc9940 3 года назад

Love the video. Have it on preorder. Hope it ships quickly!!!

@nickteele169 3 года назад

Congratulations on the new outcast man. What a beautiful truck. I've been drooling over this and the Talion all day haha. I was kind of hoping they would do something new to the backflips but it's OK cuz the backflips are an amazing tire as is. It just would have been nice to try them belted. That one jump off the ramp felt like it floated forever haha and did I see it right that it front flipped then back flipped and your steering it mid air was just beautiful. I love the new front bumper on it.the new bumpers are just amazing. Do you like the lsd plates in the diffs on the outcast? Thanks for showing the new outcast. It'd nice seeing it shown and gone over .I've drooled over the pics lol but it's nice to appreciate it in a more in depth perspective for sure.congrats again on the new truck man I definitely look forward to seeing more of it 🍻🍻🍻🍻🍻🍻🍻🍻

@winnersk8 3 года назад

Great vid. I purchased an Arrma kraton exb with my hard earned cash, and when it arrived it had no motor mount hardware. I called Arrma and expressed that…. 6 weeks later the parts showed up. So I had their roller lacking parts to actually get it up and running for 6 weeks and after sending multiple emails about my concern, nothing happened. But nice to see they can send you one at no expense so you can produce a video!! Horizontal hobby is killing it!!

@richduperbash2966 3 года назад

Thanks Brother 👊. That sucks it didn't come with the proper hardware. Quality control issues are frustrating 😝. I would've just messaged them and ran to Ace Hardware to get running sooner personally. The stock hardware is typically grade 10.9. It's fine for general bashing, but better to get 12.9 grade for high torque areas. 🍻😎💪👊👊

@uploadtime1780 2 года назад

Subscribed. Insane skills man. Great work on capturing the excitement as well.

@richduperbash2966 2 года назад

Thanks so much my friend 🤗. Truly appreciate the kind words 🍻😎💪👊👊

@MrStevelovesguitars 3 года назад

Nice truck Rich, I ordered a bunch of M2C upgrades like $700 cad for my K6 V5 rtr. Hopefully it will take a bashing without busting or bending shock towers and chassis, I got the ZRS shock caps too. Thanks for the tips and continued inspiration to push our rc rigs as hard as you can. Happy Bashing!

@richduperbash2966 3 года назад

Thanks so much Steve 🤗. There's nothing like building your own custom M2C Beast 😱. The design and grade of 7075 with Mitch's parts is on another level no question. You still want to avoid hitting huge boulders or curbs at warp speeds, but she should do fantastic for regular, extreme bashing with hard hits 💪. My biggest thing is keeping the fasteners snug and healthy so the parts can keep doing their job as designed. Happy bashing to you too Brother!!!! 🍻😎💪👊👊

@moerc 3 года назад

Oh yah, baby!! Lets go!

@CoachDRC 3 года назад

Good stuff Rich!

@rccrazy 3 года назад

Sick rip as always man🤘 Love all these EXB rigs, I definitely want the Talion, I do prefer a long chassis though😁 My old mans Notorious is still going hard💪

@restinpiecesrc5528 3 года назад

Lol i knew it! I knew you were going to be one of the first to get it from Arrma. Badass, though im disappointed they didnt do a 1/5 monster truck like a granite or big rock

@letfingerswalk 2 года назад

Bro, thanks for the overview, now I am going to buy one.....soon!

@richduperbash2966 2 года назад

You bet Brother 👊. Definitely a super FUN and highly capable rig. Hope to get her out again soon!!!! 😎💪👊👊

@jeremiahhayward6308 3 года назад

I am so getting one. Great video

@Twentyfoursilver 3 года назад

Good times Rich ! Stay Rad brother 😎 , my pre order has already been placed !

@lucaswilliams1011 3 года назад

Nice . Another awesome review , I just ordered mine today , looks like I’ll have some fun . It’s going to be a roller 8s . All that air off your new improved ramp? Sick as always 👍😉

@TheHoweFam 2 года назад

I love your videos bro! Awesome stuff.

@richduperbash2966 2 года назад

Thanks Brother 🤗. Truly appreciate it. 🍻😎💪👊👊

@BNIRc 3 года назад

🤯 light bashing , great video like always 😂

@waynesleme7426 Месяц назад

The best truck all around hands down .ARRMA!!you make good videos hella good driving bro

@richduperbash2966 Месяц назад

Thanks so very much Wayne 🤗

@jptothetree 3 года назад

I was wondering when the Outcast 6S would be released in EXB form! Dope.

@Shloppie Год назад

I been out the hobby 15 years. Last car a Savage 25 nitro. Bought an outcast 6s exb without putting any research into it and couldn't be happier. Electric came a long way.

@richduperbash2966 Год назад

Yeah it's nuts how much RC has changed 👀. Brushless power got me hooked back in the hobby after 20+ years away. Enjoy my friend!!!😎💪👊👊

@phillybrc 3 года назад

Wow, everything about this video is impressive.

@richduperbash2966 3 года назад

Thanks so much Brother 😜. Really appreciate it. 🍻😎💪👊👊

@rceskimo8229 3 года назад

Man I’m really stuck in between this and the new Talion! Killer session as always. The Outcast 6S is sweet looking now💪🏼👍🏼

@lucaswilliams1011 3 года назад

Get em all I say 😂

@RC_Berserker 2 года назад

I just got the Talion a few weeks ago I will most likely pick up the outcast EXB/RTR as well... dude, who am I kidding 😂 I’ll take the whole 6s line up when I can afford it! One rig at a time...

@3SonsRC 3 года назад

Killer rip there brother. EXB is the new BLX🤞 Smart move by Arrma for a RTR EXB line/options with this and the Talion. Cool how Horizon sent Eric the Talion and you the Outcast as you guys might lean that way in preference? It's like they know you guys 😎👍 Interested in this with the LSD's as you mentioned it handles different. I know it's dry and slid around a bit more but maybe the LSD's help with that🤔 which was nice to see. Arrma Killing the game Great sends off the new ramp, that save about half way through... WTH was that😱😂🤣 .... Love it brother Laters

@richduperbash2966 3 года назад

Thanks so much Brother Dennis 😜!!!! They probably sent me the Outcast cuz I have nice skateparks to rip her around in 😱. She's right in her element on hips and vertical transitions 🚀🚀🥰🥰. Definitely taking a visit to the concrete jungle soon. Dude it was wicked summer dry and slippery at this break in spot. Great place to test the LSD handling. I'll likely be going to an open rear diff. The handling felt good, but I like being able to whip around turns faster with max agility. Appreciate the kind words Brother. 🍻😎💪👊👊

@brandonreid4511 3 года назад

That's how you break in a new truck man 💪

@Bawla187 3 года назад

Damn it really looks good👍🏾

@breakitrc8004 3 года назад

Can’t wait to see TALION

@dyang1982 2 года назад

Awesome video rich.

@richduperbash2966 2 года назад

Thanks so much Brother 🤗. Really appreciate it!!! 🍻😎💪👊👊

@NepDouble07 3 года назад

I noticed with having the LSD center diff set to maximum effect REALLY heats up the electronics.... I'm running a castle 1520 1650kv motor, no cooling, 20 tooth pinion, heats up very quick, a lot quicker than I'd expect. When I had the original 2050kv motor (not the spektrum motor) with a 14 tooth pinion, and standard center diff, my temps were really solid even without a heatsink. I ran about 200k in my center differential as well. These LSD diffs just allow for the power to be distributed so much better, almost perfect 50/50, which is a lot of strain for the motor.

@cktennessee2356 3 года назад

Great Vid as always. Send it Brother !

@richduperbash2966 3 года назад

Thanks Brother 🍻😎💪👊👊

@islandrc-duke1972 3 года назад

awesome rc and bashing

@shaunoutndastix8022 3 года назад

Great Vid..Enjoy My Outcast but this EXB looks Amazing along with the hop ups I had to add to my V5..The EXB is the way to go with pricing..Lookn to get the Kraton EXB as my next basher..🤘👑❤

@jesseormond3202 3 года назад

Yesss the Front Flip smooth like Butter!!!

@richduperbash2966 3 года назад

Thanks Jesse 🍻😎💪👊👊

@StevenYDG69 2 года назад

Just added a v5 notorious to the fleet, super pumped to try this short wheelbase platform 😍😍😍

@richduperbash2966 2 года назад

CONGRATS Steven 😱. Give yourself time to adjust to the air control. It's actually pretty challenging compared to the longer Kraton or Talion. Great pickup though 😍. I've kept atleast 1 or 2 in my fleet since the original was released in 2016 🍻

@AdrenalineAshRC 3 года назад

Awesome 🤩

@zekesrc3285 3 года назад

Real beast👍🏽💪

@bazzeelh.abdullah2044 3 года назад

Family always 1st Rich! Enjoy ur holiday!

@richduperbash2966 3 года назад

Thanks Brother 😍🍻😎💪👊👊

@ramos.nitrorc Год назад

that ramp jump at @11:53 is awesome! I got genuinely scared

@brandonreid4511 3 года назад

Man what I would do to get a new Arrma truck from them! I literally want to get one of every Arrma model hahah 5 down so far! Just need to get a decent camera to try out making a video 👍 Love ALL your content Rich! You're the main reason for me choosing Arrma when getting into RC last summer 👊

@richduperbash2966 3 года назад

Thanks so much Brandon 🤗. I'm most grateful to have found this truck sitting on the porch 👀. Definitely was a huge surprise 😱. I definitely hear you about wanting all the models Brother. They each have their own unique handling and bashing experience 😍🍻😎💪👊👊

@TeamDrif-Tastik 3 года назад

I just bought my notorious a month or so ago. now I NED THIS!

@DeRock401 2 года назад

It’s almost the same thing. You could upgrade the parts to the exb.

@gonzodetroitify 3 года назад

Yes Rich 😎 what an intro to a new rig super strong out the gate it seems tho will you link us to those 12.9 hardwares you spoke off for the underside of the chassis to the braces that would be great thanks for the show and Risk🎯💎

@richduperbash2966 3 года назад

Thanks Brother 👊. Here's where I order my 12.9 goodies. Monsterbolts.com 🍻😎💪👊👊

@DaVerseOfficial Год назад

7:56 😂🤣 your laugh makes me laugh everytime....Great Video and always love your content....lot of love from DALLAS TX.

@richduperbash2966 Год назад

Thanks so much Brother 😜. Gotta love the good times in our hobby 🤗. Happy bashing my friend!!! 🍻😎💪👊👊

@DaVerseOfficial Год назад

@Rich Duperbash facts...I'm finally finished rebuilding the diffs and diff cases and gearbox on my outcast 6s EXB RTR...I haven't even gotten a chance to enjoy it because the diffs gears teeth were all broken in the gearbox just on my second 5 minute run...making a video to upload on my channel, but I should've done like you said and added shims...wish I seen your tips day 1 when I bought mine...lesson learned..how is yours holding up

@richduperbash2966 Год назад

@@DaVerseOfficial mine is holding up solid. The ARRMA EXB shim kit is great if you want to replace the LSD plates and just go with traditional open diffs that you tune with different weight oils. That's honestly my preference overall. Still running 50/200/20k front to rear 🍻

@DaVerseOfficial Год назад

@Rich Duperbash thanks a lot for the info. A lot of people run different oil weight, but I trust your opinion the most because you put your RCs through the MOST HEADACHES/BASHES/WORSE NIGHTMARES...lol, but you have fun doing it and give GREAT tips...if something happens with my setup, I'm going to rebuild my diffs with your recommendations. THANKS AGAIN💯❤️🤝🏾👍🏾🍻

@kizzelgarrett8251 3 года назад

Yes yes&yes brother Rich awesome 🏁👊

@richduperbash2966 3 года назад

Thanks Kizzel 😜. Hope all is well Brother. Happy 4th!!! 🍻😎💪👊👊

@kizzelgarrett8251 3 года назад

@@richduperbash2966 happy 4 to u as well brother thanks

@restinpiecesrc5528 3 года назад

Cap head bolts are awesome, i use them in my reeper to hold that big hobbywing 4985

@threefingeredrc 3 года назад

Once again a killer video. The minor tweaks you do to this ready to bash version, I wish they would incorporate into the released version. Sometimes it’s the little things that can really make a difference over time.

@richduperbash2966 3 года назад

Thanks so much Brother 😜. ARRMA has incorporated several ideas directly from basher feedback 👍. That's part of the reason I share mine on the channel to help encourage them.They adopted the 20mil center diff fluid and 39T spur gear idea months after seeing the results with the V1 Kraton 8s in bashing situations with true 1/5 aftermarket power systems 💪. They also earlier incorporated tower to tower bracing from basher influence. Smaller details like going to M4 where the front chassis support bolts to the top plate 🍻. They definitely respond to sound ideas and readily accept feedback for improvement. 😎💪👊👊

@threefingeredrc 3 года назад

@@richduperbash2966 that is very cool you can help them in that way. You are their little Bashing QA.

@keithmcsorley5271 3 года назад

awesome rc want one

@MrDario8 2 года назад

It's a perfect flying machine !!!

@gamechangerrc4633 3 года назад

That’s a really nice looking RC and great bash session as always. I think I will get one just have to wait til they are back in stock. Appreciate the shout out and look forward to seeing the next vid 👊👊💯💯

@richduperbash2966 3 года назад

Thanks so much Mike 😜!!!! Your Typhoon fan is absolutely insane 😱🤣🤣. Can't wait to put it to good use soon. Really appreciate it Brother 🍻🤙🤙😎💪👊👊

@gamechangerrc4633 3 года назад

@@richduperbash2966 👊👊💯💯

@restinpiecesrc5528 3 года назад

Eventually im going to have to get some of your fans for my reeper, hopefully you got some compatible with a 4985

@gamechangerrc4633 3 года назад

@@restinpiecesrc5528 Whenever you’re ready I will make sure you get the correct at up for your RC I appreciate the support 👊👊💯💯

@longboardguy 3 года назад

Rich enjoy your road trip your always good about replying to a comment……o and no reply needed here brother haha. Now that truck looks amazing but I am partial to that Talion release, the V2 6S Talion was my first Arrma and introduced me to the brand before it exploded in popularity. 🍻🇨🇦🤝

@ARR5ifty 3 года назад

The Outcast is one of the all time favorites!so glad they decided to offer this Stunt truck in a “upgraded” form! Great video as always brother!!!! Can’t wait To hook up again and try that new mega ramp!! 😎🤟🏼🤟🏼🍻

@richduperbash2966 3 года назад

Thanks so much Brother Dave 😜!!!! I think it was just a matter of time 😱. Definitely one of my all-time favorites too Bro. Can't wait to hook up again. Hopefully, the wind and heat will cut us a break. Have a great 4th Brother!!!! 🍻🚀🚀😎💪👊👊

@williamoleary9330 Год назад

This beast is now on sale for $489. I mean that’s unbelievable and only Arrma does this for the RC world. Love Arrma and they are our families only RC Company.

@richduperbash2966 Год назад

That's a screaming deal 😱. Love ARRMA too William. 🍻😎💪👊👊

@tygger420 2 года назад

Dear god do you have a pilots license,it seems you were flying at 30 thousand feet.nothing but respect and props to the OG RC master.

@FLSharkdiver 3 года назад

Nice rip, brother!!

@richduperbash2966 3 года назад

Thanks Brother 🤗. It takes getting used to the LSD diffs on her, but I'm digging it. 🍻😎💪👊👊

@mr.davidson3314 3 года назад

Love this and the new talion exb

@richduperbash2966 3 года назад

Me too Brother 😱. ARRMA keeps surprising us with awesome options. The Talion looks so bloody fast 👀🍻😎💪👊👊

@SerJeepRadiocontrol 3 года назад

EXCELENTE VIDEO AMIGO!! ME GUSTO MUCHO! 😃 +1 SIGE ASI AMIGO! TIENE BUENISIMA PINTA ESE NUEVO OUTCAST!!

@RCPropaganda 3 года назад

interesting concept. Now you can buy a rtr that can go pretty hard. I dig it.

@rcunknown5303 3 года назад

That exb bumper 😍. Reinforce that body so we can abuse it soon 😉. Itching to bash but still waiting on my notorious m2c chassis to show up

@richduperbash2966 3 года назад

The bumper is a Huge improvement 😱. No more Tbone required 👌. Leaving town for a family get-together this weekend. Hope you get that chassis and we can connect again soon John 😱🚀🚀😎💪👊👊

@wanebopai5869 2 года назад

Wowww .. Nice video bro, crazy bashing..hahahhahaha.. I like it..😘👍👍👍

@richduperbash2966 2 года назад

Thanks my friend. Much appreciated. 😎💪👊👊

@VetteWay2Fast 2 года назад

As always, great vids and content! Few questions: Do u find standing the shocks as straight as possible as opposed to laid down absorb landings better? Also have u tried putting slash 4x4 shocks under the stock shocks? Looking to get a little more cushion and reduce chassis slap

@richduperbash2966 2 года назад

Thanks so much my friend 🤗. I find the stock shock position often works best for all around use. Tuning the stock shocks makes the biggest impact. Double shock set-ups are generally too stiff depending on the spring rates and dampening and leads to crappy handling.. I always recommend relatively easy chassis slap. It takes significant stress off the hubs, arms, and the rest of the suspension components. The best suspension set-up I've found is the M2C ZRS bladderless set-up. I installed it after this first run. I'm a speed basher and prefer plush handling overall. That's how you get the power down. 😎💪👊👊

@averykienbaum2904 Год назад

was gonna buy a outcast 4S! but horizon has these on sale for 489!!! gonna get one on the way and maybe talk my oldman into geting one as well

@craiggreenhalgh1082 3 года назад

If An Out Of The Box R.C Can Withstand Your Driving 😱😱 It's Going To Sell Like Hot Cakes 👏👏👍

@johnlincoln4616 3 года назад

I run the same motor/esc in my kraton exb with 16t pinion and fans are a must, it won’t stay cool without them.

@richduperbash2966 3 года назад

Thanks so much for the feedback John 🤗. I'm sure these 100F+ days here aren't helping much either 🍻😎💪👊👊

@johnlincoln4616 3 года назад

@@richduperbash2966 temps are the same where I’m at and it’s hard to keep the rigs cool in that kind of heat. I know you’re a gearing guru, but I had to have a little more speed so I added the fans and kept the 16t. Summer heat might end up forcing me to gear down anyway.

@hdfrc6897 2 года назад

Bonjour super video😀

@ManishSharma_OO7 2 года назад

Nice review , does this car do standing backflip like the normal outcast 6s?

@readeracingRC 2 года назад

hay there SuperBash. im still catching up with your videos. i got the addiction yesterday and went ahead and ordered the Outcast 6S EXB. I have the 6S and 8S Kraton. i kept kicking myself for buying a truck so close to what i have. but something you said in the vid. if you have the kraton you will still want the Outcast. So im taking your word for it. I cant wait to start taring it down before my madden voyage with it. So... what is your latest set up you running in the Diff's.? so i have a good start when i get in on line. keep up with the awesome vid and great tips and advice.. thanks Rich.

@richduperbash2966 2 года назад

Thanks Brother 🤗. For the Outcast 6s EXB, I'm running 50/200/20k front to rear diffs. For the Kraton 6s, I'm running 50/500/20k, but I'm running a standard open center diff (no LSD). 500k was too much with LSD. 🍻😎💪👊👊

@cute-chihuahua 2 года назад

Madness😱😱😱

@RC_Berserker 2 года назад

With the game changer fans, are you connecting that to the loose wire that you zip tied up or are you connecting it to a designated battery?

@azazelblazin5527 3 года назад

😂Laugh definitely reminds me of my late uncle lmao.. I miss that guy

@bradlitherland781 3 года назад

cant wait for a typhon exb!!

@richduperbash2966 3 года назад

Me too Brad 👀🍻😎💪👊👊

@MadNing_ 11 месяцев назад

Hey man love the videos they are awesome with great info and sick jumps! Looking for recommendations for a good basher servo? I’m running a notorious

@richduperbash2966 11 месяцев назад

Thanks so much my friend 🤗. For a budget servo with reliable performance I use Power HD 23kg WP. They are only rated to 6V though. For crisper control with far more power I'd recommend Perfect Pass Monster servos. 🍻

@MadNing_ 11 месяцев назад

@@richduperbash2966 awesome I’ll take a look at both. Much appreciated! Bash on brother!

@biltong3470 3 года назад

the holy grail

@jr1985ii1 3 года назад

Definitely an awesome idea for the motor mount bolts. I stripped out a brand new one 🤦🏻‍♂️

@richduperbash2966 3 года назад

Thanks Brother 👊. I've also stripped a brand new one 😂. That was with good tools and technique too. Thank goodness for Dremel tools and beefier hardware options. 🍻😎💪👊👊

@jr1985ii1 3 года назад

@@richduperbash2966 Yeah the dremel has saved my ass a few times.

@Kyle11b 2 года назад

I was supposed to be buying a notorious this Friday. But I may hold off and get this lol.

@richduperbash2966 2 года назад

The Notorious is a great rig Kyle 👍. Yes the EXB comes with some nice tidbits, but you can build up your Notorious overtime to suit your needs as well. It's a tough call because the standard RTR rigs do need aluminum chassis braces and benefit from stronger towers...etc..if you start bashing hard. That said, there's plenty of quality aftermarket parts available too. Good luck with whatever you decide 🍻😎💪👊👊

@jessethuenick6588 2 года назад

Hey Rich duperbash I have a question? If you were to choose which one would you rather get? I'm thinking about getting a Arrma outcast 1/8 exb but idk if I should get the RTR or the roller? Thank you!

@evolone2047 2 года назад

What batteries do you recommend for this type of bashing on the 6s EXB? What's a good spec range on the lipo.

@armandopace6113 3 года назад

Mate I've got 3 kraton's I've all modified differently but I still would like one of them 🙃😂🤣

@ben_jsy1 Год назад

hey rich, i got myself one of these a while back. and i want to put the 16 tooth pinion on. and i saw you put some different screws in the motor mount. What size are they and how many washers did you put in there aswell?

@richduperbash2966 Год назад

Hey Ben. I use 20mm M4 socket head screws with M4 washers, just one washer per screw. The socket heads take a 3mm driver and are almost impossible to strip. You can crank them down proper tight 🍻

@cagerage21 2 года назад

Great video!! Would you choose this rig over the Mojave EXB 1/7? I'm looking to snag one of these. I own a Kraton and want another rig!

@richduperbash2966 2 года назад

Thanks so much Brother!!! Both the Outcast and Mojave are Mad fun 😍. They're 2 totally different rigs though. If you like easier stunts and tricks, the Outcast is the one. The Mojave is about 2" longer than a Kraton. It gets the power down easier than the Outcast and is probably more fun to drift and just rip around with. Go with whichever one interests you the most. 🍻😎💪👊👊

@mossyhollow3732 3 года назад

I hope their T6 heat treatment issues are resolved because I'd really like to try one. Wouldn't wheel spin reduce the load and run cooler? Learning here.

@richduperbash2966 3 года назад

Will see how their T6 fairs with harder use 🤔. I have an extra M2C chassis on standby from my original beefcake Outcast build. Tore that rig down to build my longer Orange Darling XL with the Mojave chassis 😍. When the tires keep breaking traction and spinnig at this bone dry spot, I end up using extra throttle (high RPMs) to achieve the speeds I'm after. Winding the motor up and down rapidly gets it hot easily. Sand running heats up electronics too, similar to grass. 🍻😎💪👊👊

@mossyhollow3732 3 года назад

@@richduperbash2966 Gotcha. Higher rpm to achieve the same speed. Thanks! 👊

@rasterix5721 2 года назад

Hey can you give me a quick rundown on how you have your shocks and diffs tuned on your outcast trucks? I'm kinda new and I wanna get my rig dialed in 👊✌😎

@AverageRCBasher 3 года назад

Definitely looks fast out of the box

@richduperbash2966 3 года назад

She hauls ass with the 16T 😱😎💪👊👊

@richardthompson4825 2 года назад

Hi, love your videos! What shock and diff oils are you running in this now?

@richduperbash2966 2 года назад

Thanks so much Richard 🤗. I'm running 50/200/20k front to rear diffs and 80 weight (stock) on my shocks with the M2C ZRS pistons and bladderless caps. 😎💪👊👊

@DeRock401 2 года назад

I just bought the talion exb but can’t get it til Friday. I can switch it to the outcast. I can’t decide. I think I like the talion better I’m just worried about parts availability.