BEFORE YOU INSTALL A PREDATOR 212CC ENGINE ON A SNOWBLOWER, WATCH THIS!

Подписаться 93 тыс.

Просмотров 66 тыс.

50% 1

#snowblower #ariens #predatorengine
BEFORE YOU INSTALL A PREDATOR 212CC ENGINE ON A SNOWBLOWER, WATCH THIS! INSTALLING a PREDATOR ENGINE is not a difficult process. Easier PULL STARTS and POWERFUL PERFORMANCE in HEAVY SNOW make this Predator 212cc Engine a NO-BRAINER. This ARIENS SNO-THRO definitely performs better with it. Watch as I go over STEP BY STEP how to prep the new engine and get it MOUNTED FAST. This is step two in my plan to RE-POWER this Ariens into a SNOW THROWING TANK. This looks to be one of my funnest projects yet! LIKE & SUBSCRIBE!!!
CONTACT INFO:
EMAIL: garagegearjb@gmail.com
INSTAGRAM: garagegearjb
SUPPORT THE CHANNEL or help me take the GARAGE GAL out to dinner!
paypal.me/garagegear?country....
❗️GARAGE GEAR - GEAR IS NOW AVAILABLE❗️
Vinyl Garage Gear Logos Printed on High Quality Hoodies and Shirts.
Garage Gear Hoodies etsy.me/3siFVZ6
Garage Gear T-Shirts etsy.me/3gvSw5D
Thank you for supporting the channel!
WATCH THESE NEXT:
HOW TO REMOVE AN ARIENS SNO-THRO ENGINE EASILY
• HOW TO REMOVE AN ARIEN...
Is A 50 YEAR OLD ARIENS for $100 BETTER Than Any NEW Snowblower? • Is A 50 YEAR OLD ARIEN...
HOW TO REPLACE A DRIVE LEVER ON AN ARIENS SNOWBLOWER WITH AUGER LOCK
• HOW TO REPLACE A DRIVE...
HOW TO CLEAN A TROY BILT SQUALL 2100 SNOWBLOWER CARBURETOR • HOW TO CLEAN A TROY BI...
HOW TO CLEAN, SHINE AND PROTECT AN ARIENS SNOWBLOWER • HOW TO CLEAN, SHINE AN...
HOW TO INSTALL AN HOUR METER ON A SNOWBLOWER FOR BEGINNERS • HOW TO INSTALL AN HOUR...
HOW TO CHANGE SNOWBLOWER OIL FOR BEGINNERS • HOW TO CHANGE SNOWBLOW...
HOW TO CHANGE SNOWBLOWER AUGER BELTS - FAST & EASY Replacement and Installation • HOW TO CHANGE SNOWBLOW...
PRODUCT LINKS:
Predator 212cc Engine (Non-Hemi) amzn.to/3JKQhI1
Predator 212cc Engine (HEMI) amzn.to/33GPPv5
Drainzit Oil Hose amzn.to/3t2lPmb
Box Knife amzn.to/3v8PSLz
Hour Meter amzn.to/3h8kncw
Baking Pans (To catch oil) amzn.to/3Ifeciq
5w30 Full Synthetic Oil amzn.to/3h5CkIw
Long Funnel amzn.to/3I7h4xX
Measuring Cup amzn.to/36yzPfU
Anti Seize amzn.to/3h91AO6
Long 1/2 Inch Eye bolt amzn.to/3scdJZ2
4 cycle Ethanol Free Fuel amzn.to/3t1M389
Pittsburgh 225 Piece Socket Set amzn.to/3uIYGYp
DeWalt Drill Driver Combo amzn.to/3oNG1qq
Wrench Set amzn.to/3JvwZXj
Allen Wrench Set amzn.to/3Jmzw5S
ARIENS Sno-Thro & Attachment Operators Manual amzn.to/32XZqxg
Ariens OEM Sno-Thro Extension Spring amzn.to/35K1ytv
Gladiator Workbench amzn.to/3osnsbb
Gladiator Cabinets amzn.to/3sk6cWF
Gladiator Floor Cabinet amzn.to/3sfhGuQ
Red Rolling Stool amzn.to/3fL10Wd
Shear Pins (Ensure fit prior to purchase) amzn.to/3GUTwMc
Ariens Snowblower Cover amzn.to/3AWTjWJ
Ariens Snowblower Mat amzn.to/3CxhsmF
36" x 72" Snowblower Mat amzn.to/30E94nP
Ariens Deluxe 24" Snowblower amzn.to/3qT1Gzq
Ariens Compact 24" amzn.to/3qYrcDp
Ariens Deluxe 28" Snowblower amzn.to/3CMOKO1
Ariens Drift Cutters amzn.to/3sOeRCy
Armor Skids (Be sure to check size prior to purchase) amzn.to/3GVzrFA
JB and Garage Gear do not own the rights to the additional photos and clips used in this video.
Disclaimer:
Due to factors beyond the control of Garage Gear, I cannot guarantee against improper use or unauthorized modifications of this information. Garage Gear assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Garage Gear recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Garage Gear, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Garage Gear.
JB from Garage Gear is a member of the Amazon Affiliate Program and may receive a commissions on select purchases. These commissions do not influence the prices you pay on Amazon. Thank You for supporting Garage Gear!

Хобби

Опубликовано:

13 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 315

@GarageGear 2 года назад

Here is a link to the NON-HEMI PREDATOR ENGINE I installed on my Ariens Sno-Thro! amzn.to/3tzHm5Z Thanks for Watching!

@davidroache4699 Год назад

Love Thy neighbor - Buy American!

@Finnegan6674 Год назад

It is $100 cheaper at Harbor Freight than Amazon.

@debbieandkurtray380 Год назад

How can I contact you?

@GarageGear Год назад

@@debbieandkurtray380 hey Debbie my email is in the video description! Thanks for watching!

@tannerc900 Год назад

My wife thinks I’m right weird, I hear or see someone doing an engine swap on a car or truck and I’m just “😒” but an engine swap on a SNOWBLOWER now you got my attention 😂

@GarageGear Год назад

Hahaha you’re in good company Tanner! I’m the same way! 👍

@derekcollins1972 Год назад

Same here 😀

@scott01clay74 Год назад

She should be happy tell her the the price difference of an engine swap on a snow blower versus a car she just might go get you the engine from harbor freight lol

@JmanRx81 Месяц назад

Same

@user-vh1ox5hf8m 5 месяцев назад

I just finished doing this engine swap on my 1971 Ariens and was amazed how everything lined up perfectly to the old Tecumseh engine. The only difference I had to do from following these excellent instructions, was that I had to feed the new engine mounting bolts down from the top because of the limited space due to the transmission components. Many thanks from another Buffalonian.

@GarageGear 5 месяцев назад

ROCK ON NEIGHBOR! Very cool you got a predator on that old gal!

@buzzedalldrink9131 4 месяца назад

nice work, You need to add a piece of rubber to the inner impeller. It will keep it from clogging and helps with wet slushy snow. Lots of videos on here to see how its done. Top tip- you do not need to add the rubber to every blade of the impeller. If you have four just do two opposite each other if you have three you could even get away with one.

@GarageGear 4 месяца назад

Oh yeah! Already got that done! Thanks for the tip!

@buzzedalldrink9131 4 месяца назад

@@GarageGear cool!!

@michaela5261 Год назад

I have the exact same ariens. I bought it 15 years ago for $200 not knowing anything about it. The previous owner put a 5hp honda on it. It has never let me down. I recently just bought a mid to late 80s honda hs55 as my new primary snowblower, not a chance i get rid of the old Ariens. That will be with me for life😊

@GarageGear Год назад

Awesome my friend! These are great machines!

@scottboat6552 Год назад

I added the Hemi Predator to my 1980 MTD 5/24 that my father in law gave me about 15 years ago. I had to definitely do some fabrication. double pully hole diameter required a sleeve which I easily got on E-Bay. While I was doing this I also replaced all the bearings and bushings resealed the auger drive housing repainted the auger and housing. I put an hour meter on as well. Starts right up runs strong and kicks ass in the snow. Very happy with the motor and how this machine looks.

@GarageGear Год назад

Awesome Scott thanks for sharing! 👍

@nathanryan Год назад

Awesome inspiration - thank you for posting this and for all your other videos. I just did this Predator swap on my 1973 Ariens 910008 (got it from my neighbor for $100 a few years ago). Just FYI I had to disassemble the transmission to get access to bolt the Predator. There are two "arms" held by some pins under the front bolt holes. Those must be removed or I couldn't access the existing holes (which match perfectly with the new engine!!!). I ended up putting the two "front" bolts from the top, with lock washers/nuts on the bottom. The two in the back were able to go 'up'. I replaced the friction disc while I was under there, greased and lubed everything. There are some good vids showing how to take this apart easily and it sort of "swings" up. The pulley cover bolt also does not fit the predator, but I'll pick one up to match the size (5/16). And I *think the tension/guides are good, but now that I know my way around this tank, I'm confident I can adjust/fix if needed. Oh and a tip to help relocate the gear for the chute... I used two hinge blanks stacked like these... www.amazon.com/Hinge-Blanks-Door-Hinges-Nickel/dp/B07L8NRP2K/ref=sr_1_13_sspa?crid=CXP3BHDG5D4K&keywords=hinge+plate&qid=1667319702&qu=eyJxc2MiOiI0LjQzIiwicXNhIjoiNC4zNCIsInFzcCI6IjQuMTkifQ%3D%3D&sprefix=hinge+plat%2Caps%2C146&sr=8-13-spons&psc=1&smid=A1G5OS4TK6MMVH

@GarageGear Год назад

Hey Nathan! Thanks for your positive feedback! I appreciate it! Also, thanks for sharing your tips and tricks here as well! Very helpful to other viewers! Thanks for watching! 👍

@josephforgione1762 2 года назад

Ever since I subscribed to your channel, I look forward to snowstorms so I can use my snowblower. Especially that I have a much better understanding of how snowblowers work and how to properly maintain them. Then of course, we are waiting for lawnmower season to begin. Up here in Northern Vermont, that’s only the first week in July.

@GarageGear 2 года назад

Awesome Joseph! My goal with this channel is share the knowledge of these machines. Lawn season is coming fast and I’m running out of snow here. Plenty to come with lawn care this season! Stay tuned!

@JmanRx81 Месяц назад

I put a 212cc Predator hemi engine on an old 29" thrower and added paddles to the impellers. It NEVER clogs and throws snow clear across the street. So if if you have an annoying neighbor, you can easily clogg their driveway. Only issue is the carb gets too cold when it's snowing. It needs a heat shield from the muffler to the carb to keep it warm, otherwise it starts surging badly after a while of use.

@GarageGear Месяц назад

Good info here jman! Thanks for sharing!

@CanadianCharby Год назад

Makes the the Best Buy list! I did the swap about 10 years ago and still going strong. Had to drill out the main jet for cold starts. Glad others find the value in these machines as I have owned mine since 1986 as 2nd owner.

@GarageGear Год назад

Awesome my friend! These machines are in a league of their own! Thanks for watching

@CanadianCharby Год назад

@@GarageGear have a look at my video on RU-vid under my name. A little nervous in front of the camera lol

@GarageGear Год назад

@@CanadianCharby hey Charby! I watched your videos! Very cool machine my friend! I have a lot of questions for you! First did you paint that whole thing yourself? It looks great! Feel free to email me to carry on this conversation. My email is in the description. Thanks my friend!

@cameroncassel994 2 года назад

Great video!!! I did the same thing and used the predator engine on a john deere snowblower, the only problem I had was the throttle linkage would freeze up. So I used a metal paint tray to fabricate a sheld to cover it up to make the linkage work as it should. The up I used was similar to the actual Honda snowblower. No fun when the engine linkage freezes up.

@GarageGear 2 года назад

Thanks for sharing this Cameron! That’s good thinking! Maybe I’ll turn something similar to this I to a video someday! 👍

@russellstephan6844 2 года назад

I converted over to vacuum extraction a number of years ago. It's the way to go for everything from automobiles to air compressor pumps -- no mess, no fuss, quick and easy.

@GarageGear 2 года назад

Yea those things definitely do a great job! Thanks for sharing my friend! 👍

@jamesnm21 Год назад

The front end on the newer Ariens tend to lift up as soon as the going gets tough or they encounter an obstacle like a sidewalk crack. It winds up taking more work to operate them instead of just keeping their head down and plowing forward.

@GarageGear Год назад

Thanks for sharing! The old ones had so much weight in the front end it helped keep them down! 👍

@rando1818 2 года назад

I bought a Preditor 212 yesterday (7/16/2022) for $129.99 after $20.00 coupon. I looked on HB today and they are now $159.99. What the heck? Can’t wait to put it on the old Toro 826 LE. Thanks again!

@GarageGear 2 года назад

Hey Rando! Their prices fluctuate quickly. Looks like you caught them at the right time. It will bring new life to your old machine! Have fun with the install! Thanks for watching!

@waynetcampbell 8 месяцев назад

I put one of these babies on my old McClaren edger. Tight fit but let's just say that edging nearly 1000 linear feet is very fast now. Thanks for your videos and channel!

@GarageGear 8 месяцев назад

Awesome Wayne! Thanks for being a cool fan! 👍

@grahamcharnock6453 Год назад

I've watched a few of your videos and I see that you are very safety conscious, however I don't hear you mention hearing protection. Maybe I missed it, but as an old guy with hearing loss and Tinnitus I always preach ear plugs or over ear protection. Especially with lawn equipment with snow throwers being the worst. Great attitude and simplified videos without a bunch of filler stuff thrown in. Cheers, Graham.

@GarageGear Год назад

Hey Graham! I do mention it in a few videos! I do suffer a little bit of hearing loss myself so I respect what you’re saying! Thanks for sharing and watching! Appreciate your positive feedback!

@tommak6516 Год назад

Super comment, hearing protection is vitally important.

@illagor 2 года назад

DUDE! You are my hero! My Ariens Sno Thro is 53 years old this year and it JUST DIED ON ME! I called around and was told I could not get an engine to fit, so I bought a NEW Ariens, but could not throw away the old one. Then I saw this video and now know what to do! I will buy a new Predator engine and install it on my chassis and maybe my son can carry on with the SNO THRO for another 53 years! Thank you! YOUDAMAN!!!

@GarageGear 2 года назад

Haha lol you should be able to get an engine on that no problem. The only thing you’ll have to check is if it’s a single pulley or dual pulley. If it’s a two pulley engine then I would say you’re out of luck but if it’s a single shaft with one pulley you’re good to go!

@cuthbertkwan2594 Год назад

@@GarageGear My Arien snow thro tecumseh engine is a dual pulley and just died. It is a few years later than yours(model 922010). I bought a new engine and there's only 1 shaft. Is there anyway to connect the drive pulley and auger pulley together?

@GarageGear Год назад

@@cuthbertkwan2594 there is but I think it only works for certain models. The shifting linkage on the back/bottom will need to be flipped. And you’re gonna need to get a new belt that’s probably going to need to be longer. Swapping engines on those is tough. Sorry to say this but you may want to consider returning your engine unless you can figure out the issues I mentioned. Let me know how it works out. Merry Christmas 👍

@Tinman386wisconsin 4 месяца назад

I took an old ariens that originally had a 2.75 hp engine that was bad. I stuck a predator engine on it but i had to combine the old dual shaft into one and i had to modify the drive wheel by reversing it. It was a lot of work but that thing really ate thru the snow.

@GarageGear 4 месяца назад

I heard reversing it was the trick! Thanks for sharing

@glennmartin9576 Год назад

I did a almost the same thing. Swapped out the 8hp briggs with a china 420cc/13hp engine on a 78 gilson blower. Its lethal, nothing can stop it. IT snaps ekstension cords and dog chains without bogging😂

@GarageGear Год назад

It’s a lethal weapon lol! Thanks for sharing Glenn!

@shadowghst7704 2 года назад

I’ve been waiting for this! What a super deal you got too! I know my old Tecumseh HM-80 is really old, but that 212cc should do the trick. Super stoked to do this engine swap.

@GarageGear 2 года назад

Hey Adam! It was an awesome deal! Almost felt like I stole it lol! 212’s work on a lot of blowers! Give it a swap and let me know how it goes!

@smallblock412 2 года назад

With that new engine this old Ariens will run another 50 years! The predator engines are well regarded for their high quality and low price. Especially for the price you paid lol. The 212 is also known to punch above its weight class. I also remember watching a video about a year ago where a guy did a complete breakdown between the hemi and non-hemi versions. I don't recall the reasoning but I do remember in the end he recommended the non-hemi version.

@GarageGear 2 года назад

Hey Smallblock I imagine it’s got a lot more life left now! I totally agree the 212 punches above it’s weight class! Seems like it’s more of an 8hp engine than a 6.5. Based on reviews alone the hemi has about 400 and the non hemi has about 4000. I think that says a lot! Keep on rocking my friend!

@paulmurphy9262 Год назад

So I mounted this engine, and it fit perfectly on my John Deere TRS27, the footprint and hole configuration is perfect. I was stoked since we're getting hit my a huge storm in the Northeast tomorrow. Pulleys went on the shaft nice and easy too. Unfortunately, the pulleys on the shaft do not line up with the auger and drive pulleys. Even though the shaft is the exact same measurement as the original, the actual face of the engine is about 2" further back than the the old one. 😮‍💨 I checked all the other measurements before buying, and it sure looked like a perfect match. I thought of drilling new closer mounting holes, but existing hardware on the blower wont allow that. Unless there's a way to extend the drive shaft 2", I guess it's going back to Harbor Freight, and out comes the shovels (and my back as well 😤.) This is not to discourage anyone from doing this, just check and double-check all possible measurements first!

@GarageGear Год назад

Hey Paul, you could try cutting the original mount bolts off and reposition the engine closer where you’d like it and drill in holes for new bolts. Perhaps that could work. Let me know if it’s a possibility!

@frayedknot298 2 года назад

Just stumbled across this video. I didnt see this mentioned yet. As far as engine mods there is a go cart racing class called the predator class. Tons of racing parts for that engine

@GarageGear 2 года назад

Oh yeah! I should have mentioned that. People go crazy with these engines! Really cool stuff out there! Thanks for sharing!

@MrMattDat 2 года назад

That is a GREAT build!! The heavy body & transmission of a 70's Ariens (and in great shape for its age) and a new engine. Talk about an incredible solution for $200!!! A couple of things to note. Shouldn't the top edge of the belly pan be "hooked" behind the sheet metal above it? Did you inspect & clean the friction disc & slide axle?

@GarageGear 2 года назад

Hey Matt! This has been a fun build so far! And yes for $200 a hell of a deal! I’m going to check that belly pan. I’m not sure if it hooks under or not! I’ll see. The friction disk and slide axle are all good. That thing is a race at in 4th gear with the new engine. Incredibly fast. Thanks for watching bud!

@paulmysliborski4832 2 года назад

What? No fuzzy dice?? 😂 Man, that was as easy a swap as I have ever seen. You're right, it's like that 212 was made for this machine. Lol Another kick a$$ vid, JB!!

@GarageGear 2 года назад

Knew I forgot something! I really think they were made to fit right on these! The chute was the only thing that slowed me down! Thanks as always for the positive feedback Paul! What’s up in your garage this week?

@paulmysliborski4832 2 года назад

@@GarageGear No garage, just a big shed. Lol. And sadly, not much. No snow to blow, and no grass to mow........ 🤣

@GarageGear 2 года назад

@@paulmysliborski4832 got it! I hear ya! I’m getting close to that point as well. I call it “no snow-mow season! Lol! Usually lasts for about a month here.

@timb7775 Год назад

If the fan is turning much faster that means the drive plate that its directly linked to is also turning much faster. With the wet stuff and ice I usually deal with my machine couldn't handle moving into it any faster, the fan blades are already bent as is it. I think the weak link of these ariens is the fan blades aren't supported underneath, I've seen 3 machines so far that have bent fan blades.

@GarageGear Год назад

Thanks for sharing Tim!

@edwintaber6465 2 года назад

Snowblower engines have a "stove" to heat the air going into the Carburetor. It captures muffler surface heat and/or engine block heat. There is shrouding not found on an all purpose engine. The engine must be able to reach and maintain its design temperature so that components expand/contract to specs. Removing the filter is fine. Engines have a power curve which typically peaks in the 2800 to 3200 rpm range. Unless you have a "need for speed" operating in this range is best.

@danclancy6535 2 года назад

Yes .. The Snow King motor have the "heat box " around the carb ,a must in the cold & snow dust conditions .Also the heat box works with the jetting & air intake so the motor does not "lean out " in the cold air that is why most Snow King's run the best in the colder weather , the colder the better .. anything over say 30 F they will not run the best because of them running richer. A proper dialed in Snow King is a very good motor , the key is you MUST check the oil EVERYTIME you use it ..period .. the oil sling in the crankcase is not the best design for low oil conditions in the crankcase you must maintain the correct level on the oil dip stick . If not .. you will throw the piston rod .. most of the time the rod goes through the block right behind the starter. The oil level is like the Ocean ... you cannot turn your back on it .. lol ! Keep a eye on the oil ! Otherwise nothing beats it in the cold & snow . That motor was made just for that ..just for a snowblower. You do not want anytype of airfilter system on a snowblower. If you follow the proper procedure starting a Snow King they too will start on the first pull everytime.

@GarageGear 2 года назад

Thanks for sharing Edwin! 👍

@GarageGear 2 года назад

@@danclancy6535 more good information! Thanks for sharing!

@danclancy6535 2 года назад

@@GarageGear that being said , your new motor would do good in above freezing temperatures with warmer air & no snowdust and not run as rich in the warmer air. I am in Syracuse NY .. Love your channel.

@edwintaber6465 2 года назад

@@danclancy6535 The poor oil sling design on my 1972 Ariens blower cost me an engine. It couldn't handle along-the-contour slopes. Thanks for bringing up the jetting issue. While cold dense air is good in some respects giving you better combustion it can also be your enemy as Dan points out. If someone has info on jet differences between mowers and blowers that would be interesting.

@everybodysjonathan 2 года назад

Nice machine, very solid. I like the lever engage auger, but I guess they took that away for a reason. I think you could turn around and sell the engine for about what you bought the machine for. 🤟

@GarageGear 2 года назад

Hey Jonathan! Definitely a solid machine! If my buddy doesn’t claim it I’ll either sell it as is or part it out on eBay. Thanks for watching!

@shadowghst7704 2 года назад

Nahhhhh, gonna keep her and make her better! Dropping an impeller kit on it this weekend. Kinda fun actually…

@vanmcvanner9748 Год назад

I have to drill holes to mount the larger predator engine. I actually used bigger pulley for the auger. I also welded steel to reduce clearance to the housing. Using the leftover from the new scraper blade and skid shoes. No need to mod the engine. Or should I risk a unplanned dismantling.

@GarageGear Год назад

It sounds like you got a good plan here. Thanks for watching!

@billbarr3644 2 года назад

Really liked this video. Two questions. What was the reason you took the foam block out of the air cleaner? Is that because snow blower engines aren't run with air filters installed? Second, you had to modify the position of your chute crank. Is that typical with a modification like this? That would be the one thing that is outside of my skill set, although I'm sure I could find someone that could do it for me.

@GarageGear 2 года назад

Hey Bill! I took the foam air filter out because moisture gets trapped in those, freezes, and blocks air flow. Best not to have one as most snowblowers don’t! Second, if you could find a small flat piece of metal like I did and drill some holes in it you should be fine. That should be all you’ll need. Perhaps you could also find a local welder to make one for you like I did. Or even pop a question out there on Facebook book to see if someone could help you out. Let me know how it works out for you.👍

@KNKLHEAD 5 месяцев назад

Nice! I always looked at those Predators at Harbor Freight, often on sale, wondered if plopping them on a snowblower is a good option!

@GarageGear 5 месяцев назад

They’re awesome engines my friend! No complaints on this end!

@aaronguerrette 2 года назад

I am feeling inspired to swap my motor in my same exact snow blower. I do like the push button start, does predetors have that provision? Side note I used a harbor freight coupon code (which is on the actual coupon) that had restrictions but I needed a 60gal stand up air compressor (i think 3 hp) motor and I got 50% off via online purchase so its a nice hack.

@GarageGear 2 года назад

Hey Aaron I think the higher end engines may have that but those can get pretty pricey. Awesome hack! Glad to hear that this video inspired you a bit to tackle an engine swap! 👍

@user-if2cr7bw3m 6 месяцев назад

Excellent video! I'm about to do the same conversion on my 1980's Ariens snowblower. So did the engine mounting holes line up with the existing mounting holes in the snow blower body? If that was the case, why bother removing the original mounting bolts?

@GarageGear 5 месяцев назад

The original mounting bolts weren’t tall enough.

@user-if2cr7bw3m 5 месяцев назад

Gotcha, thanks!

@davemcguire1602 2 года назад

Great video, I own the exact same snowblower, any suggestions on how to make the chute not turn on its own, That thing tends to vibrate and like to turn right at me... Thx

@GarageGear 2 года назад

Hey Dave, thank you! In regards to the chute, I have never experienced this but you may want to check your chute bolts at the base. Make sure they are tight! Thanks for watching

@jrdnhsnbrg Год назад

Hey JB! A question for you - I have a very similar snowblower although slightly older, model 10970. I believe it to be a 1969 or 1970 year. Anyway, it has a cog-style chute rotation system. Any tips on moving the cog when installing a Predator? It is much more in the way than the worm drive your blower has.

@GarageGear Год назад

Did you try going down and out with it?

@LONNIE1949 9 месяцев назад

Chances are if you did a valve job on the techumseh engine it would have plenty of power, many of those engines actually came brand new needing the valve clearance adjusted, IV done dozens of them and they always start and run much better.

@GarageGear 9 месяцев назад

Thanks for sharing

@robertknight4672 2 года назад

Don't tell Honda and I brought one of these Predators engines home in a Honda Element. 😂 I put it on a Toro 521 snowblower. Even at $149 it's still cheaper than buying a new snowblower. I got the Toro for free.

@GarageGear 2 года назад

Haha I won’t say a word lol! That’s awesome! Love getting free equipment! Thanks for watching Robert!

@f62darkstar 2 года назад

Nice job....almost looks like this one throws farther than your newer Ariens machine.....BTW....still no snow here in Western Maryland :'(

@GarageGear 2 года назад

Thanks Louie! It’s pretty comparable! And that was on low belt tension. How do you still have no snow? That’s wild! You could always buy a ton of ice from the grocery store and give it a go! Lol

@f62darkstar 2 года назад

@@GarageGear it's just my luck I guess...owning TWO snow blowers is probably why....If I didn't have one....It would snow a lot.

@GarageGear 2 года назад

@@f62darkstar very true! 👍

@chrisE815 Год назад

My dad insists on running old 60s chain driven blowers. He has the 212 on both and is love. Edit: Craftsman blowers

@GarageGear Год назад

Solid blowers! Bet they throw great! Thanks for sharing!

@tommak6516 Год назад

I have one of those old chain drives. It does not throw snow for crap and it clogs in wet snow worse than a newer belt rotary design. I only use it as a back up machine. I thought about putting the rubber on the paddle mod to see if that would make it work better.

@chrisE815 Год назад

@@tommak6516 there have certainly been a lot of improvements made over the past 70 years but my dad loves those old machines!

@tommak6516 Год назад

@@chrisE815 Here is a tidbit which may help someday. The bushings on each side of the paddle impeller wore out on mine. None of the repair shops had parts diagram/part no. or could figure out the part (machine too old). Could not find part by looking up model of snowblower on internet either (too old?). So I got bushings off internet from general bushing supplier just matching dimensions off the old ones (what was left of them as old ones very deteriorated). Anyway, if I had not found these parts the machine would have been scrap. Sorry, it has been awhile and I do not know what the website was where I found them.

@jth877 2 года назад

You said you were going to get an old ariens! That thing is in good shape. I've noticed HF is getting a bit snotty with their prices. Nice loop hole. I wish their vertical shaft engines were cheaper.

@js12278 2 года назад

Inflation results in higher prices for all across the board.

@jth877 2 года назад

@@js12278 This has been happening with HF for the last few years. Not due to the resent inflation. An HF cordless drill is not a Milwaukee but HF thinks they should be priced similarly.

@GarageGear 2 года назад

@@jth877 yea their prices have gone up on a lot of items. They used to be the place for deals but nowadays I dunno! I like their hand tools and their return policy is really good. Keep an eye out for those loop holes! 😉

@roryrice8742 Год назад

My JD snowblower has a 8 HP Tecumseh. Will a 6.5 predator work for me? I thought of doing what you did before I saw your video. Its a 28 inch auger. Thanks.

@GarageGear Год назад

Hey Rory! Most definitely! I’ve seen guys put these on 32 inch machine and they still have more power than the tecumseh engines! Can’t go wrong with them! Plenty of power! Thanks for watching!

@jameshill4900 6 месяцев назад

Good video I just wouldn't have used antiseize on the pulley. It removes the friction that they are designed to have to help secure the pulley.

@GarageGear 6 месяцев назад

Thanks for sharing and watching james

@YardworkWithJohn 7 месяцев назад

Are these motors typically bolt-on like this? Or with more common & modern MTD machines, do you often have to drill new mounting holes and modify/adapt the output shaft?

@GarageGear 7 месяцев назад

They fit most models just fine! They usually have them on display! You could always take measurements and see how it would fit your model!

@williamstewart6534 Год назад

The original Tecumseh Sno King engine was a “Chiropractor Special”. You would throw your back out trying to get it started. I finally resorted to removing the spark plug and putting a little bit of gas right in the cylinder before I pull started it. If you have Tecumseh Sno King, get electric start. Your back will thank you!

@GarageGear Год назад

That’s a great idea to help it get started! Thanks for sharing!

@meegstomtom Год назад

Can't say I agree there. Some perhaps. But I have 2 of these old h70 Tecumseh on late 60s ariens and both start with a few pulls year after year. Perhaps carb work is needed? I like these older h70 Tecumseh more compared to the newer ones that have snow king printed on them with the larger pull start.

@GarageGear Год назад

@@meegstomtom thanks for sharing Meegs! That engine couldn’t even be pulled though! I actually lifted the whole blower up trying to pull it! The electric start worked but I need the pull cord if I’m far from my house!

@meegstomtom Год назад

@@GarageGear was referring to the op and them removing the spark plug to add fule to start it. Lol but no matter what. Any engine can fail. These new ones sure do start nice for sure though.

@GarageGear Год назад

@@meegstomtom ah got it! They sure do! I’ve seen some engines fail after two uses lol!

@RunMondays Год назад

Instead of having just the pull start would it be possible to install a Craftsman 110 volt 951-10645 electric starter (if you happened to have one lying around) on this?

@GarageGear Год назад

Hey David it would more than likely not fit. Keep me posted if you try it and get it to! !

@js12278 2 года назад

Nice price. Great customizing on the chute crank. Nothing beats first pull fire up! Keep all this up and you’re going to need a bigger garage!😁

@GarageGear 2 года назад

At times this garage is filling up beyond capacity lol! Definitely an awesome price for that engine! And the first pull rocks! What’s going on in your garage lately js?

@js12278 2 года назад

@@GarageGear plans for next weekend include storage prep for the snowblower and shovel. Then we get to ready the mowers for the green season. That includes oil+filter change, air filter and fresh plugs, tire air pressure check for the JD rider. Then we check the EGO mower blades and run a cycle deplete/recharge the 7.5 ah battery. Fun fun 🤩 I’m looking forward to the spring season to get here already. I’m done with all the ice we’ve had lately.

@GarageGear 2 года назад

@@js12278 awesome my friend! Sounds like you have a fun list ahead of you! I’m excited for the green season as well!

@davidbrennan5 Год назад

I was lucky, I found a brand new Tecumseh 11hp 358cc about 8 years ago sitting on a shelf in a small engine shop, it was a leftover from 2008. I put that on my older blower that had an 8hp on it, my blower throws snow 30 feet and never bogs. I looked at newer machines but they are not built the same, too many cables and plastic parts, everything is built cheap now unless you spend 3k or more.

@GarageGear Год назад

New machines are so cheaply made it’s sickening! Thanks for sharing David!

@hifid3lity 5 месяцев назад

Ditto on the older engines. Even the old 8hp version of this Techumseh was impressive. Always tackled the biggest snow banks and sounded great when loaded up.

@davidbrennan5 5 месяцев назад

Its a mid 80's craftsman (Noma/Murray) blower with a 27 inch cut. It was gray but I sandblasted it and painted it black. The 8hp only had trouble in very deep snow or wet snow, with the 11hp it can blow deep snow fast and it never runs out of power. I can still get parts for it easily.

@edwintaber6465 2 года назад

Why snowblower engines need warm air to the carburetor. The colder the air the denser the air which gives you a lean mixture. This can cause too high temperatures on the piston. You need the evaporation of the fuel to help keep the top of the piston from burning through. You need a specific ratio by weight of air to fuel for proper combustion. Air temperature can affect that as well as elevation. Power decreases by 3.5% for each 1000 ft of elevation requiring jet changes in the carb. Cold air also affects fuel atomization. The fuel must be turned into small droplets by the carb for proper combustion and timing. In cold air the droplets get too big causing delayed combustion and reduced power. In extreme cases it can wash the cylinder walls of oil. In some carbs you can get icing in the venturi where velocity of the air is increased and pressure is reduced. The lower pressure cases the water vapor in the air to freeze at a higher temperature. To give the proper fuel air mixture the size of the carb opening which determines the air mass is matched with a small hole "jet" where the fuel is mixed with the air. To adjust for air temperature and altitude you can change the jet size to obtain the proper air/fuel mixture.

@GarageGear 2 года назад

Thanks for explaining this in great detail Edwin! 👍

@patrickcrist9586 Год назад

@garage gear JB fellow Buffalo resident here. My dad has a very similar rig would the 420 predator swap be the same? Or is that too much power for the auger?

@GarageGear Год назад

Hey Patrick! It might be too much for machine. The 212 is more than enough power for these size blowers. Can’t go wrong with it. Easy swap too. Bigger engine may need more modifications. Thanks for watching bud!

@RSole9999 7 месяцев назад

I have a really old Toro 824 with a bad engine. Predator engines won't fit because they are lacking the bolt holes for the belt tension pulley. Is there any work-around for that?

@GarageGear 7 месяцев назад

Hey R! I’d have to see it in person to truly tell!

@micheljalbert6106 9 месяцев назад

I really enjoyed watching yr videos. Never done any mechanic job and succeed in changing belts and friction disk on my ariens 28 deluxe. Many thanks Michel fm quebec, Canada

@GarageGear 9 месяцев назад

Awesome my michel! Great work! Thanks for being a cool fan!

@Neonbiker Год назад

I kind of wish I knew how to do that with the old craftsman snowblower my parents had for 30 something years .. I know nothing about putting new engines on them

@GarageGear Год назад

Hey Ryan can’t be much different than what I did! Thanks for watching!

@Neonbiker Год назад

@@GarageGear welcome we sold it this year for $100 as it sat ..

@GarageGear Год назад

@@Neonbiker ah got it. We’ll now you know. Thanks again for watching!

@l337pwnage 2 года назад

Unfortunately I don't have the part numbers, but since that's a Honda clone, some clever people have hunted down the Honda winter air box and the Honda winter shields for the linkages, for those interested in looking into that.

@GarageGear 2 года назад

I have see these parts as well! If you happen to come across part numbers please let me know! Thanks I337!

@andye9026 Год назад

I've seen a few comments in this series about how the predator engines handle cold weather. I'm thinking about picking up one of these old ariens and doing what you have when the engine wears out. I live in West Michigan and I think you're in buffalo so we have very similar climates. Do you find that the predators have trouble in the under freezing temps and if so have you done any carb work to rectify that?

@GarageGear Год назад

Right out of the box no issues Andy! Mine has been working great as is so far. If any thing comes up I will most likely do a video on it anyways! Thanks for watching!

@andye9026 Год назад

@@GarageGear good to know. Thanks for giving me the boldness to pick up a used snow blower!

@GarageGear Год назад

@@andye9026 ROCK ON BROTHER! Those predators really make these things TANKS! And for the price you can’t go wrong.👍

@chadcarpenterred Год назад

I did this swap and had trouble in -10 and below temps. Found a guy on ebay that makes adjustable jets for these/honda. I popped that in and you can turn the rich/lean to where it needs to be depending on the temp. I also found that if you cut a hole in the heat shield of the exaust and out a 1"pipe from that into the air box it helps keep it running right. Put mine on a 26"toro. Had to get a 7/8" sleeve for the pulley, other than that it was plug and play.

@GarageGear Год назад

@@chadcarpenterred thanks for sharing this Chad!

@Lakiose 11 месяцев назад

At 11:53 you claim that the auger and impeller are running faster out of the box with the predator engine. But looking at the tecumseh on the left it seems that the impeller is moving much faster. Can you verify? Also wasn’t that Ariens an 8 hp opposed to 6.5? Thinking about doing the swap but from the videos it looks like the impeller is now slower.

@GarageGear 11 месяцев назад

Hey I responded to the email you sent! 👍

@philmorrison6898 8 месяцев назад

I have that same identical snow blower! And that tecumsea engine is wearing my tools out! And my patience! Harbor freight here i come!

@GarageGear 8 месяцев назад

Can’t go wrong with this swap!

@georgesteffens7489 5 месяцев назад

I’ve got a mid 90s MTS with a 5hp tecumseh that has about had it. Is it worth doing this swap or just finding a whole new machine?

@GarageGear 5 месяцев назад

You’re gonna pay a fortune for a new machine nowadays. If you like your old frame slap a new engine on it!

@georgesteffens7489 5 месяцев назад

@@GarageGear I just went out and looked to be sure, I’ve got the single crank tecumseh so this should be a strait swap. The frame is rough around the edges but solid, so I’m planning for an engine, thank you! 😁👍

@GarageGear 5 месяцев назад

@@georgesteffens7489 if it’s straight forward go for it.

@whocares0692 2 года назад

Enjoy watching your videos. But I've got a question about my Toro Power Max 828 LXE. How do you split the bucket from the engine ? .

@GarageGear 2 года назад

That’s a good question. Not exactly sure! I’d have to see it up close. Should be some bolts on the side. If you want to email me some pics my email is in the description.

@whocares0692 2 года назад

@@GarageGear, if you can tell me how to do it, I'll send you several pictures. . Thanks, I'm a phone / computer idiot.

@GarageGear 2 года назад

@@whocares0692 if you have someone nearby that can help you that would be good. It should be as straightforward as opening a new email and attaching the photos.

@MudMonsterRacing4 5 месяцев назад

Great video! We turn 5k plus rpm on our stock Hemi predators on our kart.

@GarageGear 5 месяцев назад

Thanks for sharing mudmonster

@johnhouli3450 2 года назад

That’s a good engine for the price do you think it would fit on a toro 38064, 6 hp Tecumseh engine is what I have now. Built in 1999.

@GarageGear 2 года назад

I would imagine so. If it’s a single driveshaft engine then this should be a direct swap! Thanks for watching my friend!

@johnhouli3450 2 года назад

@@GarageGear single it is driveshaft. Two pulleys under cover where the belts are.

@GarageGear 2 года назад

@@johnhouli3450 sorry I’m confused are there two separate spinning pulleys or two pulleys on one driveshaft?

@shadowghst7704 2 года назад

If I remember correctly, weren’t you replacing an 8HP Tecumseh? The 212cc, translates to 6.5 HP. My Tecumseh 8HP bogs down in the snow. I re-adjusted the belt tensioner, but it doesn’t throw snow more than 4 or 5 feet. I ordered an impeller kit, should be here today. Maybe that old engine has seen better days?

@GarageGear 2 года назад

Hey Sam, the engine I have is a 7HP! These snowblowers had 4hp, 5hp and 7HP engines installed on them originally. 6.5hp is plenty for these guys. Is the carb clean on yours?

@shadowghst7704 2 года назад

@@GarageGear yeah, pretty clean. I used my snowblower this morning. It worked, but certainly could have been better. I actually enjoy working on this old relic. The fact that it works at all, is amazing! Mine is originally an 8HP, would that be too much of a downsize, going with the Predator?

@GarageGear 2 года назад

@@shadowghst7704 shouldn’t be an issue. What size is the blower? I’ve seen guys pop these on 32” wide blowers!

@shadowghst7704 2 года назад

@@GarageGear 28”, 3 stage..it’s pretty cool..

@shadowghst7704 2 года назад

@@GarageGear 28”, dual augers (Drift Breaker), 4 blade impeller. Impeller kit arrived today.

@marathoner43 2 года назад

Awesome work. I wonder how hard it would be to put an electric start kit on the Predator.

@GarageGear 2 года назад

Great question marathoner! I’m not exactly sure but obey there is a way! Thanks for watching as always!

@tommak6516 Год назад

Mr. Gear, First I must say your videos are great quality, staging, filming, dialogue, sound. Do you do a lot of editing? What video equipment do you use? Second, putting the allen lock screen on the key? Whattttt???? come on now !!!! , Third, ethanol free gas not at gas stations around here, and I am not about to buy it in cans. Fourth, why not blow the snow right off the grass instead of shoveling it on the driveway??? That seems very WACKY.

@GarageGear Год назад

Hey Tom! I use a go pro 7 camera and a deity microphone. You can search ethanol free near me and see if any gas is Available near you. I suppose I could blow the snow from the lawn to the driveway but I don’t want to ruin my lawn with the machine! Thanks for watching!

@SVW1976 5 месяцев назад

Im not surprised JB has a bunch of 10mm sockets while we have none. 😂

@GarageGear 5 месяцев назад

Hahaha I think I have 3 lol! Still a crazy number compared to the average diyer! Lol

@timhand5630 Год назад

There's another one for sale in Rochester. Watching to see how yours goes!

@GarageGear Год назад

Get it! You won’t be disappointed!!!

@ericpaladin 2 года назад

This trilogy of videos was outstanding. Couldn't wait for this video to drop. Keep up the great work!

@GarageGear 2 года назад

Thanks Eric! I appreciate the positive feedback! I have a few more videos coming out on this before winter wraps up! Stay tuned!

@Dicofol1 Год назад

What do I do if my Ariens Tecumseh engine (HS50) has 2 pulleys on the engine and one is rotating counterclockwise?

@GarageGear Год назад

Hey dico! You’re in a bit of a tough spot. I had a similar situation before. I was told you could. Go the back/ bottom of the snowblower and flip the drive controls from on side to the other and that could solve your issue but then again I haven’t seen this work on all models. There are a few videos on RU-vid about this. This is a very difficult mod with two pulleys. Thanks for watching

@Dicofol1 Год назад

@@GarageGear Thanks for the suggestion I was thinking of the same idea. Can you post those vid links? I can't seem to find them 😂

@think3rofficial Год назад

Found one of these snowblowers for $100, great gift to somebody who’s willing to give some TLC and a lot of WD-40 to it.

@GarageGear Год назад

They are bargains for sure! These machines are absolute animals! Thanks for watching!

@T80Delta Год назад

Genuinely curious: why no air filter???? It would have zero downside as far as I can see.

@GarageGear Год назад

Hey Delta, an air filter in the cold winter could collect moisture and freeze. And on a small scale this it could harm your small engine choking it of air. Many pros recommend taking it out. Thanks for watching!

@phiksit 4 месяца назад

Also makes it easier to add a shot of starting fluid when there's no air filter in the way.

@jonathanrice1070 Год назад

Impressive. It would be too much power for the tight confines of my neighborhood.

@GarageGear Год назад

Haha I hear what you are saying! Friend of mine did this and took out his neighbor’s window. Thanks for watching

@CharlieRice-eq5hb 7 месяцев назад

My John Deere snowblower has a 8 horse Tecumsah motor. Do you think a 212 predator would replace it? 26” auger. Thanks.

@GarageGear 7 месяцев назад

Absolutely it will! You’ll have a whole new machine on your hands! 👍

@user-tm7fq3sz3b 5 месяцев назад

Would a predator engine fit on an MTD 22inch snow thrower? The original engine on this snow thrower was a tecumseh 5hp engine.

@GarageGear 5 месяцев назад

If it’s got two pulleys then it won’t. Thanks for watching.

@duck7927 Год назад

"the neighbors at it again with the crazy snowblower, he re snowed his driveway hunnie"

@GarageGear Год назад

Hahaha my driveway is a snowblower testing center lol! Thanks for watching duck!

@lomi4267 Год назад

How did you connect the drive pulley?

@GarageGear Год назад

There’s only one pulley on this engine. It controls both the auger and drive system. Only need one belt on this blower. Thanks for watching Lo!

@baddad5781 Год назад

I really enjoyed this one, I may have missed it in the video but are you keeping this one for yourself or selling it?

@GarageGear Год назад

Hey bad dad! This is one is a keeper! Too cool to sell! Just put new tires on it this week too! This thing is an animal! 👍 not going nowhere! Thanks for watching

@BigDaddysGarage 2 года назад

The new engine looks great on there. 👍👍

@GarageGear 2 года назад

You should see it with an impeller kit on it too! That video comes out this weekend!

@TecumsehRulesbcserk 2 года назад

I bet you could add a throttle control lever on the handlebar to make throttle adjustments easier

@GarageGear 2 года назад

That idea has potential! Was also thinking of adding a kill switch up by the handle bars.

@mikeadams2339 2 года назад

Unbelievable that puppy started on the first pull! Great swap, thankz for sharing .

@GarageGear 2 года назад

I know right? I was blown away! These things run great! Thanks for watching Mike!

@blasterman5063 2 года назад

I got my first snowblower a few weeks ago and it has been in my family for 50 years and I was going to swap the 4hp with a 212

@GarageGear 2 года назад

Go for it! You won’t regret it! Thanks for watching blaster man!

@kjell-richardlvdal373 2 года назад

Great video, thanks for shearing.

@GarageGear 2 года назад

Thanks Kjell! Working on Any projects in your garage this week?

@kjell-richardlvdal373 2 года назад

I get snowblowers cheap and fix them up, and than selll them, it is a kind of my hobby, a little bit of grease and paint and New auger elt they become good AS new

@GarageGear 2 года назад

@@kjell-richardlvdal373 awesome my friend! I do that quite often myself! 👍 great extra spending money!

@janetotovic1442 2 месяца назад

Can i put a predator engine on a 1976, 20” Ariens snow thro?

@GarageGear 2 месяца назад

You should be able to just make sure it’s not a dual pulley engine on the old tecumseh engine

@lomi4267 Год назад

My gears are now backwards on my snapper any idea how to fix it swapped out old engine with a preadtor now it goes forward in reverse & backwards on forward

@GarageGear Год назад

Hey lomi, did you have a dual pulley engine on there before?

@lomi4267 Год назад

@@GarageGear yes now a single

@PainterD54 Год назад

That would be my first choice if my 6 HP engine gets bad on my Toro 624 I just got for free.

@GarageGear Год назад

Awesome my friend! Can’t go wrong with it! Just make sure you have a single pulley on your current engine. Swapping this on a dual pulley can be trickey. Thanks for watching

@flyjarrett 6 месяцев назад

New subscriber. Did you consider installing a 420cc on it?

@GarageGear 6 месяцев назад

Thanks for checking out the channel. I did think about that but there were too many variables. This one was direct fit.

@tedhardulak7698 Год назад

I bet your neighbioors wonder about you hauling snow into your drive when everyone else wants it out. And I am glad that orange cap matched, would be a shame to have to return it. ):

@GarageGear Год назад

They all think I’m nuts around here Ted! Thanks for watching!

@howiehowerton5733 2 года назад

Great video I’m going to do this. Thank you

@riverunner9978 Год назад

Amazing engine replacement! What a beautiful option,thank u!

@GarageGear Год назад

No complaints on my end either! That engine runs great! Thanks for watching!

@dabprod 10 месяцев назад

Excellent. I'll keep this in mind if I decide to make an engine swap with my old Airens.

@GarageGear 10 месяцев назад

Awesome my friend! 👍

@yuryb59 2 года назад

Hi. Is the "Рredator" chinese Loncin, Zongshen, Rato or Lifan?)))

@GarageGear 2 года назад

The predator engine is made in China. Thanks for watching!

@coreygreening1329 Год назад

How much different is the 420 to mount on an ariens

@GarageGear Год назад

Hey Corey, the engine mount pattern might be slightly different but I’m not sure. You’ll probably need a bigger pulley and new belt to make it fit. With any engine swap there is always a need to modify something. You’ll get an insane amount of power though! Thanks for watching!

@brewyourown4life 2 года назад

Great video. Getting ready to do the same thing on a old machine i have

@GarageGear 2 года назад

Hey Brew! Hey you won’t regret it! Thanks for watching!

@EMTP94 Год назад

Awesome video, do you have the dimensions of the bolts and a part number for the belt that you used?

@GarageGear Год назад

Hey sky, one and a half inch bolts did the trick and a 36” belt was needed for this application. You might want to buy a few different sized belts and keep the one that fits best and return the others. Thanks for watching

@EMTP94 Год назад

@@GarageGear thank you for the reply, I see this yours was a single shaft, do you know it the ariens model 922006 model is a single shaft or not? I have heard mixed things.

@GarageGear Год назад

@@EMTP94 no problem! Just checked a parts diagram and it looks like a dual pulley model! Hope this helps!

@patram4880 7 месяцев назад

You didn’t show where you had to line up for a new holes because the other studs I’m sure you ground them off what they hang grinder you didn’t show that

@GarageGear 7 месяцев назад

I just bought the right size bolts and bolted it to the unit. No grinding needed!

@randybowers1236 Год назад

I only just saw this I have a the same model from 1968 which my dad bought new. It is on its third motor.

@GarageGear Год назад

Motors are easy to swap on these! Thanks for sharing!

@nickclayton2517 2 года назад

I want to do this on. My st524. But I have the dual shafts.

@GarageGear 2 года назад

I heard there’s a way to do this but I’m pretty sure it’s pretty complicated. I’m going to look more into it. Thanks for watching!

@domwhalen7348 2 года назад

I just bought one after this video for $50 with a predator on it there is a differential on one of the wheels looks like you were only rolling in one wheel drive

@GarageGear 2 года назад

Yep I know. She’s tough to turn when the differential is locked. I’ll lock it when the snow is really bad. $50 hell of a deal. Thanks for watching!