Beginners guide to prepare primer for paint

Подписаться 70 тыс.

Просмотров 18 тыс.

50% 1

In this episode, we continue with the dodge truck door repair. I share with you a step by step beginners guide to prepare primer for paint. When painting your car, preparation of the surface is critical for producing flawless repair and paint. As always, if you have any questions about auto body and paint repair, leave them in the comments. Be sure to check out my library of auto painting and how to video's to help you with your project!
How to video's
⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Tips and tricks when painting a car
• TIPS and TRICKS when p...
Beginners guide to Autobody playlist
• beginners guide to aut...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
gunnbud spray gun light
amzn.to/3IeJLKu
3m cubitron2 xtract 320 grit
amzn.to/3xwRpLB
3m cubitron2 xtract 180 grit
amzn.to/3Ibjn4b
3m cubitron2 xtract 80 grit
amzn.to/3XCrGMg
upol clearcoat
amzn.to/3XhGtgj
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@jay-in-az Год назад

Learn so much from this channel. Thank you!

@GarageNoise Год назад

Awesome! Appreciate the comment and support brother!

@ranararon Год назад

You give a lot of info on painting. Thanks

@GarageNoise Год назад

You got it! Appreciate the comment and support!

@catsandfurious525 Год назад

great job, waiting to see the final result

@GarageNoise Год назад

Working on that video now. appreciate your comment and support!

@joelkoonce8559 9 месяцев назад

Thanks Again. I've been doing paint work for 25 years, never to old to learn. 🙂

@GarageNoise 9 месяцев назад

That's for sure, learning something new everyday. Appreciate the comment and support!

@robertcharlton1551 Год назад

Thanks Chris for all the info on fixing the Dodge trk. You spoke right to me.

@GarageNoise Год назад

You bet

@JohnWD40TC02 Год назад

Thanks for sharing your knowledge again Chris, lots of useful detail and the do's and don'ts when painting a white panel🙏👍John UK Oh and please keep them coming🙏🙏💪

@GarageNoise Год назад

Very welcome! Appreciate the comment and support!

@troyadams1076 Год назад

That's another great lesson

@GarageNoise Год назад

👊

@reloadnorth7722 Год назад

Always great videos.

@GarageNoise Год назад

👊👍

@octanegarage3729 Год назад

Great video thanks for all the tips

@GarageNoise Год назад

You bet

@Scarefac3 Год назад

I just ordered a pre primed steel bumper for my truck and wanted to know what steps would you take to prep it for paint. Thanks

@GarageNoise Год назад

I have several videos on this topic. Sand with 600 ,adhesion promoter, sealer(optional),base and then clear hope this helps appreciate the support!

@willsachs Год назад

Awesome! Thanks Chris.

@GarageNoise Год назад

You bet!

@guillaumel3640 Год назад

Never disappoint Chris 👍 thanks for the video

@GarageNoise Год назад

You bet!👊

@dontrompas1312 Год назад

Awesome 😊

@GarageNoise Год назад

Thanks brother!

@rogerstephens8980 Год назад

Ihave use several brands of 2k primer but upol is the best make sure you get the metal to metal one thunder road auto body.

@GarageNoise Год назад

It's good stuff I'm always testing more primers tho. Appreciate your comment!

@outlawtrux Год назад

What’s the reason for removing dirt off the white if you covered it with sealer. For some reason I thought you were planing on fading it in. Good work I appreciate the info.

@GarageNoise Год назад

Removed dirt off areas that are just getting clear

@SalvageRevival 2 дня назад

HI, just came across this video due to getting the same primer. Would it be about 600 grit paper or a scotch pad if priming / sealing a new panel. Great video 🤟

@GarageNoise 2 дня назад

600

@Jopakilo 3 месяца назад

Thank you for the video and watched before I made mistake with using high build primer. I have a question about adding the reducer. I saw the instruction says 4:1 . 4part of primer to 1 part hardener. But why adding extra reducer as instruction not mention? What situation should I add the reducer in? Thank you

@jimdrechsel3611 Месяц назад

Enjoyed your video. What yellow block sanding kit is that? Can I hook it up to a shop vacuum? You use the alcohol instead of the wax and grease remover? Curious why you made that choice.

@GarageNoise Месяц назад

It's a mirka sanding block it can be hooked up to a mirka vac but as far as a shop vac the hose sizes a different. Alcohol or prp solvent abothe fine . I use both but Alcohol is cheaper and creates less static.

@jimdrechsel3611 Месяц назад

@@GarageNoise if you had a panel done to bare metal what choice would you make? Alcohol or wax and grease remover? Alcohol will remove what type of contaminates? I’ve watched people use certain window cleaners and then wax and grease removers but this is the first time I’ve seen using alcohol. Your thoughts? Thank you for the response.

@billbeauvais8518 3 месяца назад

I see that the UPOL System 20 primer can be mixed as a primer filler (4:1), a primer surfacer (4:1:1) and a primer sealer (4:1:2). I see a lot of videos explaining the application differences between a surfacer and a sealer, but not much of any explanations on the appropriate applications between using a filler vs a surfacer. Based on the fact that the filler mixes without any reducer, I assume that is appropriate to use when you want the highest amount of filling capability to provide more product to sand. Is that correct? Also, my paint supplier didn't provide reducer - so can I use any urethane-based reducer?

@GarageNoise 3 месяца назад

Yes, you are correct. High build if applying over filler and need max fill. Yes you can use any urethane reducer.

@allenpp6748 Месяц назад

Great info. I have a gallon of the upol high-build primer. Will it fill in small paint chips? I'm planning on spraying 5 wet coats then blocking and painting as I don't have time to prime-sand and reprime.

@GarageNoise Месяц назад

Yes it will, anything deep should be filled tho.

@allenpp6748 Месяц назад

@@GarageNoise Will do. Today is primer day for my roadrunner and hopefully paint by the end of the week lol.

@fundamentallybroken4194 11 дней назад

@@allenpp6748 I like to use the UV activated filler for that. It makes the process faster, and I noticed it doesn't seem to shrink like the old stuff.

@courtneylewis9500 Год назад

Great job, what was the gread sanding paper you started with for the primer?

@GarageNoise Год назад

320

$@leofrac435$

@leofrac435 Год назад

You should have used the glazing putty over the filler before priming the door .

@GarageNoise Год назад

👍

@impalaman4546 Год назад

Nice

@GarageNoise Год назад

Thanks!

@tedc9306 Год назад

What's the difference between silicon carbide sandpaper vs. Aluminum oxide sandpaper???

@GarageNoise Год назад

I don't know exactly but this 3m cubitron is the best I've ever used for quality and budget.

@raymondbrown867 Год назад

As a business,how critical is the preparation.do you look at and sign off on all body work from employees before painting in applied.

@GarageNoise Год назад

It's very critical, most important steps. I'm the I'm the main employee 🤣 I do have Daris helping with prep.

@rogerstephens8980 Год назад

You're using the right kind of primer used it ten years in large shops the painter oks or rejects the body work since he may need to re paint it in Dallas in high guality shops youre required to have 8 years as a body man except possably the skings big box there working for the ins co not the customer.

@meguinness1116 15 дней назад

How long for did u left the primer to dry? Ta

@backroadscamaro541 Месяц назад

I got a run in my dp90 primer do i wet sand that

@GarageNoise Месяц назад

No, block it out

@doc4244efa 11 месяцев назад

What sanding system do you use ??

@GarageNoise 11 месяцев назад

Mirka Deros amzn.to/3s61QGR

@chilltify Год назад

Did you change from dura block to mirka?

@GarageNoise Год назад

I use them both

@claygreen4723 Год назад

Does the type of primer really matter if I'm going over old paint? I was wondering if I could use lacquer primer since it's a 1 part (for convenience) under a 2 part urethane color coat.

@GarageNoise Год назад

You can but 1k is real aggressive and can react to different types of paint. If you are going to use it light first couple coats with extra time to dry.