Bells of Steel Plate Loaded Cable Tower | ASSEMBLY 

Just received my cable tower and watched this assembly step by step and had no issues. Very thorough thank you guys die posting this. Made my install super easy

Just got mine in yesterday and checked to see if there was a video so I could make sure all of the pulleys were installed correct, this helped a ton, much appreciated.

Just finished assembling my cable tower while following along to this video! Great video for saving time 🤙

The selecterizer is upside down, this video should be taken town and re-uploaded.

i just installed this today in my home and i absolutely love it. the video was very helpful

Great video - super helpful

24mms are on the bottom and attaching to the wall mount. So, you need a 17, 19, and 24. This really pissed me off as I had to make two trips to Lowes before getting this right. If you've made changes to the product, you need to reupload the video.

Just ordered this plate tower because of the video! I felt a bit worried reading the instructions on a few other companies as it seemed pretty poorly laid out. This game me the peace of mind I won't scream for hours trying to get it assembled. Can't wait to add this to my home gym!

SUPER!

You put the selectesizer part on upside down. The instructions and the cable tower video with Kaevon have it so the pullout knob is in the higher position. Does it matter? I'm in the process of assembling mine.

Just completed assembling mine. This video does help a lot but it may be outdated for the newer version of the system. First, you need a 24mm socket for the bottom and top frames. And he put the selectorizer on upside down. If you do it his way, you wont be able to use the top holes. And make sure you all label the bolts before starting. Don't know why they don't label them for us. Lasty, if you ordered the back upright attachment, it provides little to no stability. You still going to need to bolt it to the wall or floor.

Great video! Just make sure your pulley's are fully assembled. I had the inner plastic piece come off and it will make a funny sound when the pulley is used.

I havent even ordered this and for some reason watched the whole video anyway 😂. Any idea when the aluminum pulley upgrade will be back in stock?

@10:11, lol yep that happened to me. I thought the one pole went on the "other" side of the pulleys, but nope, it definitely has to be behind the welded nuts.

Can you make one of these for the weight stack option?

I'm thinking about installing into a concrete garage floor. Do you know what size/length tapcon+ screws I should use? I have a slab foundation if that makes a difference.

Will you guys be reviewing the plate loaded lat pull down? Really want to purchase it but don't see any videos or reviews besides the few on the website!

Can these be bolted on to the front of the light commercial rack, or are the feet of the rack going to get In the way. Also will these be available in 3x3 to bolt onto the hydra line?

How can I mount the cable tower to the floor?

Hi, do you have a link to the instructions for this one? Mine came with the assembly instructions for the stack loaded tower instead

I'm on the first step and you mentioned bolt 2 more than once. The instructions literally show that there's only 2 of them, en yet the very first step needs nearly 6 of them. 2 for each side on the base and then another pair for the wall mount... What the heck is going on here?

What screws would I need to mount it to the studs in my wall?

@bells of steel video was okay. Got a bit wonky around the floating two wheel/pulley system and never really cleared up that mess. I had to zoom in at the end to catch the fact I didn’t place the cables metal tip end through the short screw. That and my screw package did not come numbered. I had to again, zoom in and do a comparison to tell the differences

I ordered the cable tower with weight stack - is the assembly the same for it or are there differences? My muscles are larger than my brain so any help is needed.

I ordered and received the new 2.0 version with back upright included. One thing I would make as a point is to install the back upright with the base of the frame from the beginning. It ships as the cable tower and just the additional back upright. If you follow this video or instructions guide setting up the cable tower, you'll have to undo and redo some steps to add the upright. Adding it from the start of the base frame is the way to go. The instructions on the upright aren't clear but you don't need the back plate (part 38 in my guide) on the rear of the frame. It also shows only a top mounting plate which is connected by 2 bolts, however, with the upright side plates on, you can't add the 2nd bolt on the mounting plate on the very top. Not sure if I messed up but it currently only has 1. I havent found any mounting hardware yet to anchor into a stud yet so any suggestions would be helpful. I also had an extra washer in my parts, triple checked to make sure, so you could have additional pieces leftover. Overall, I think this is the best home gym cable tower for the value, have tried an amazon one and a titan version.

Followed these instructions to the tee. But there seems to be a lot of friction with my cables especially on the left side it doesn’t move as freely as the right and even that one doesn’t move that freely like in the video.

Just received mine and I was about ready to lose my mind with the bolt for the front rod not threading and then I noticed there was a bunch of slag from where they welded the wheels on in the hole, so I had to drill out that before I could get it all put together. Spent probably over an hour screaming and swearing at the fucker for not working, so be sure to check for that if you're having issues.

What size concrete anchor will I need to bolt to wall/floor?

As someone who owns the selectorized version of the cable towers and found the assembly video of that one really poorly done and poorly narrated, credit where credit is due as this video is immensely better executed. Regular and consistent call outs to the bolt #s or sizes throughout. Much better camera work that makes it more visible to see what you’re doing. Call outs for tips about the assembly process. IMHO the weight stack assembly video needs to be redone. It’s obviously not impossible to follow along, but comparatively, the difference in clarity of explanation is massive. The difference is most obvious to me in watching the difference between the two videos while the pulleys and cables are being installed.

Getting mine today and exited to assemble! One question: For mounting into wood studs, customer support suggested tapcon+ screws, which are concrete screws? Could y'all clarify what the suggested screw size and style truly needs to be?

We ended up with parts 19 (2 rubber rings) left over. Did we miss it in the video? We are also missing step 2 sheet in our pamphlet

I live in the Netherlands and would LOVE to buy one (or two) of these. Do you have any future plans to ship to EU countries?

How long are the weight sleeves?

[slaps roof of pulley] "this bad boy can fit so many selectorizers on it!" i get mistakes can happen especially in a one-take like this. but please put up an edit where certain errors and design changes (24mm hex head, anyone?) are addressed. especially when several comments call out an issue with one of 3 or 4 possible pieces that could be the selectorizer.