Belltech 2/4 Drop Kit Rear Install -- 2017 Ram 1500 4X4 -- Lowering kit

Подписаться 640

Просмотров 24 тыс.

50% 1

2017 Ram 1500 4X4 Rear install of the Belltech 2/4 Drop kit
Rear lowering portion is easy to install
Torque Specs:
Shock Bolts - 100 Ft-Lbs
End Links - 56 Ft-Lbs
Small bracket bolt - 30 Ft-Lbs
Relocation Bracket - 100 Ft-Lbs
Track Bar - 90 Ft-Lbs

Хобби

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@rodriguezequipment2113 4 месяца назад

Thanks good video just did my truck too

@fireproof69 Год назад

Great video. Helped me a ton! Watched it several times before I tackled mine. Went well. I do have a 1/2” difference from side to side. I ordered new spring isolators to go on top of the springs. And will drop and see if I can get it to settle closer to even. Oh… something else about the BellTech progressive spring. The top closer coils are pretty much coil bound sitting empty. And I ended up cutting off the bump stop cups from the frame. Otherwise it was sitting on the newer short stop inserts.

@muko2002 4 года назад

Make sure to get the relocation brackets by Inez

@gruffproductions683 4 года назад

I wasn’t having any issues so I decided against getting them. Did you have problems or did you put them on as a precaution?

@muko2002 4 года назад

Gruff Productions if you notice your differential moved upfront and is not centered anymore . By installing the Inez brackets will help your to center it properly . I haven’t drop mine yet . But I will get it from Moes performance with Viking shocks and the relocation brackets.

@BuzanyBenni 3 года назад

Does it matter if it’s a single cab ?

@sergioledesma9127 3 года назад

How much weight can u carry on the bed with the kit?

@thebomberThebomber-yy2th Год назад

Cant i just buy lowered springs like a 3 inch or 4 inch drop rear springs on my 2010 ram crewcab 2wd ? I can still use the stock shocks correct ?

@gruffproductions683 Год назад

Yeah with that method you will be leveling the truck out however the front may be a little higher. Just a word of caution, when you lower the rear 4” you are basically riding on the bump stops. You may want to get a set of helper bags to smooth out the ride.

@thebomberThebomber-yy2th Год назад

@@gruffproductions683 so should i get 2 inch rear springs or 3 inch with rear drop shocks belltech ??

@drakohemi812 3 года назад

What shocks do you recommend for a 5/8 drop on a 03 ram?

@ohKillemRevolk 11 месяцев назад

They make a kit for an 2002 ram 1500 Slt?

@jonathansanchez6981 3 года назад

Also can I install it without the relocation bracket

@gruffproductions683 3 года назад

You can but i wouldnt recommend it. You will be way out of spec

@lrs333 2 года назад

Does BellTech provide a kit for air suspension 2016 ram 1500

@gruffproductions683 2 года назад

None that i found. I actually put together a rear bag system on mine because i was constantly bottoming out.

@christianpalmerin Год назад

Is it the same process on an air suspension? I have a 2013 ram 1500 4x4

@MrFullforcesound Год назад

I noticed on the lot that there was a driveshaft cross member notch that was on the kit. Did you not install that notch kit for the extra clearance of the single driveshaft?

@jonathansanchez6981 3 года назад

Do you have to jack up the rear axle in order for the shocks to fit they are short about to inches from the axle

@gruffproductions683 3 года назад

Yes, you have to jack the axle up to seat the springs and line up the shocks

@jonathansanchez6981 3 года назад

Ok thanks for the teply

@jonathansanchez6981 3 года назад

Question would you be able give me a call if not to much trouble

@lrs333 2 года назад

How good does is a ride I hear it puts vibration on the 2 point drive shaft

@gruffproductions683 2 года назад

For obvious reasons it doesn’t ride as good as stock but its not bad. It also depends on what size wheels you go with. I used the 22” wheels so not much rubber to cushion. I did not have issues with the driveshaft.

@abaddelatorre1440 Год назад

Do u have to use new lowering shocks or can I run the stocks

@futurestreamz1664 Год назад

You can run stocks if you want

@kevincortez5411 2 года назад

I have a 18 sport ram 4x4 . Would I be able to cut that spring in the rear to go 6 inch?with out doing any mods

@gruffproductions683 2 года назад

You would need a few modifications done to go 6”. Once you go past 4” in the rear more things need to be done.

@harryharrison602 2 года назад

Did the front ever lower down? Just got mine done an it sits kinda high in the front

@victoralmanza1347 2 года назад

Did yours go down a little more?

@cruzrodriguez8389 2 года назад

will this kit work on a 2019 classic

@gruffproductions683 2 года назад

So the kit says up to 2018. However as long as they did not make any changes to the suspension (which i don’t believe they did) it should work. If your suspension looks identical to mine in the video you should be good.

@yo_ez1590 2 года назад

Why didn’t you show you front procces

@yo_ez1590 2 года назад

Process

@gruffproductions683 2 года назад

I split it into 2 videos so it was less confusing. You can look the other one up on my channel. Thanks for watching

@radiouniquefm 3 года назад

Good afternoon I have a 2018 bighorn 1500 4x4 myself do you run into any issues after installing this kit on your truck.

@gruffproductions683 3 года назад

First issue was the alignment shop said they couldn’t fully align it. Some shops don’t like lowered trucks though. I’m getting some offset ball joints just in case. Second, when I ran 20” wheels with the stock tires I bottomed out on the rear suspension a lot. I am in the process of putting air bags in the back. But when I put on my SRT-10 22” wheels with 305/45/22 tires the bottoming out went away. Other than those 2 things the kit works and looks great.

@radiouniquefm 3 года назад

@@gruffproductions683 thanks for your reply 🙏

@geezy6141 4 года назад

Can you tell me the part number?

@gruffproductions683 4 года назад

Part number for the whole kit for the 4x4 was 965sp

@josekasino4213 3 года назад

Is that a belltech relocation bracket?

@gruffproductions683 3 года назад

Yes, that is the bracket that comes with the kit.

@venomous1763 3 года назад

Are you having any wobble in the rear end at higher speed?

@gruffproductions683 3 года назад

I’ve only been up to about 95, but no issues with wobble. However it’s basically riding on the rear bump stops so I’m cutting them out and putting in airbags