Best Bolt Extractor? Let's find out! Drill Hog, Bosch, Irwin, Speed out, Ryobi Broken Screw Sets

Подписаться 3,2 млн

Просмотров 4 млн

50% 1

Which bolt and screw extractor set is best? Brands tested: Drill Hog, Bosch, Irwin Hanson, Speed Out Pro, Ryobi, Grabit Pro, Yosco, TIAMAT, Rennsteig, and Cleveland. Each tool tested on damaged exterior screws and grade 5 bolts. Extractors tested for maximum torque load on screws and bolts until failure (broken extractor or broken screw) or loss of grip by the extractor. Extractor durability and wear evaluated under a microscope. No sponsors on the Project Farm channel. It's all about unbiased testing. Hope you find this video helpful.
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Drill Hog: amzn.to/34lyrtO
Bosch: amzn.to/3AfDCrI
Irwin Hanson: amzn.to/3htikPz
Speed Out Pro: amzn.to/3uJi0me
Ryobi: amzn.to/2CNBCPA
Grabit Pro: amzn.to/2Yo1Sua
Yosco: amzn.to/3gkLzBE
TIAMAT: amzn.to/2E6mjlW
Rennsteig: amzn.to/3giX24V
Cleveland: amzn.to/31hNLWi
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Хобби

Опубликовано:

3 май 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8 тыс.

@ProjectFarm 3 года назад

Products Tested In This Video (in no particular order):Drill Hog: amzn.to/34lyrtO Bosch: Currently not available Irwin Hanson: amzn.to/2Qlf5N3 Speed Out Pro: amzn.to/38qnsBu Ryobi: amzn.to/2CNBCPA Grabit Pro: amzn.to/2JPT8Ga Yosco: amzn.to/3gkLzBE TIAMAT: amzn.to/2E6mjlW Rennsteig: amzn.to/3giX24V Cleveland: amzn.to/31hNLWi

@crestedfalcon5260 3 года назад

It'd be great to order these by your ranking (to help those purchasing based off your great tests)! Thank you.

@chuyrangel6621 3 года назад

²⅔

@TeamEmperor 3 года назад

There is a new king extractor. The R.B.R.T. Extractor from Mac Tools.

@simplybeanjelly 3 года назад

Bummer, I was going to get the Bosch one

@simplybeanjelly 3 года назад

Nevermind, I found it on amazon! www.amazon.com/Bosch-BSPE6D-12Piece-Spiral-Extractor/dp/B07G1M1TQG/ref=sr_1_1?dchild=1&keywords=bosch+screw+extractor+kit&qid=1608009954&sr=8-1

@lockpickinglawyer 4 года назад

Great test! I’ve worn through dozens of extractors over the years. It’s great to have some empirical data to guide future purchases. Thank you. 👍

@toad3222 4 года назад

Pretty cool to see you here, although I can't say I'm surprised

@charper9890 3 года назад

Dude... using an extractor is cheating... keep to the picks man

@TeamEmperor 3 года назад

There is a new king extractor. The R.B.R.T. Extractor from Mac Tools.

@notchipotle 3 года назад

here's a custom bolt extractor that bosnian bill and I made

@simpleman8883 3 года назад

Rihsyan Adam Riansyah 😂 these never get old

@jaywilbur515 4 года назад

Its soo dififcult to find an unbias objective review that has no ties to sponsorship and not lined with company pockets. It either works or it doesnt :) you are a thoroughbred scientist sir! Kudos

@ProjectFarm 4 года назад

Thanks so much!

@MODattack 4 года назад

Great I needed this about two weeks ago when I snapped my hardened steel exhaust stud 😂

@donpizzo8963 4 года назад

@@ProjectFarm Will WD-40 cure Covid-19? Let's find out.

@friedmule5403 4 года назад

@@donpizzo8963 It surely will, after drinking it, you will with guarantee not suffer from COVID-19 anymore, but a bullet, jumping in front a train and eating a hand grenade, will have the same effect! :-)

@GodWeenSatan 4 года назад

Like what consumer reports used to be, now they are unreliable

@kgdies Год назад

"Every 20 Minute Job Is Only One Broken Bolt Away From Becoming A Two Day Ordeal"

@ProjectFarm Год назад

Great point!

@jennw6809 Год назад

Literally me today!

@crocodile1313 Год назад

@@jennw6809 Same!

@jennw6809 Год назад

@@crocodile1313 I had to hire a locksmith, wish I'd just done that to begin with!!! Why don't I have a crystal ball??? Hope your 2 day ordeal turns out ok.

@chef423 Год назад

@@jennw6809 Me too, just a bit ago. Oil pan bolt!

@NLindellDC 3 года назад

I just wanted to say thank you. I've seen a ton of your videos that have been helpful but this time I have 2 particularly difficult bolts to get out that I have stripped despite my best efforts not to. They are 5mm bolts (almost screws really) so I went with the Grabit Pro. I've never owned an exctractor set before and have always wanted one. Most helpful!!! Thanks again for the taking the time!

@ProjectFarm 3 года назад

You are welcome!

@LL-fi4rr 4 года назад

The way he says "looks like the plastic case is already broken" as a matter of fact cracked me up 😂

@dyrskyz1 4 года назад

The best channel ever

@ProjectFarm 4 года назад

Thank you very much!

@leonelleguizamon5637 4 года назад

indeed

@-joo3033 4 года назад

Yes, one of the few channels that actually tell you very usefull stuf

@2StrokeSmoke544 4 года назад

I tell everyone about this guy when they mention an item in one of his videos ive seen

@Jim_woods 4 года назад

@@2StrokeSmoke544 same

@jhfjhfkf 3 года назад

Thank you!!! No matter what I look for you, you always have a video on it. Even when searching extractors your video popped up. This has to be the best channel yet, completely untarnished by not accepting endorsements, one of a kind channel that is surely of the gold standard.

@ProjectFarm 3 года назад

You are so welcome!

@narekpapukyan5455 Год назад

Hi Project Farm, your channel has been an absolute GODSEND for myself working with tools as a hobbyist. I have always followed the philosophy of "the right tool for the right job", and it's amazing to see your tests giving each product an equal opportunity to perform with standardized testing. Although I have always paid top dollar for tools to avoid doing the job twice, what amazes me is the pleasant surprise of more affordable products sometimes beating the more expensive ones from your tests! Thank you again and please continue these videos, they are an absolute necessity for anyone working with them! Much love!

@ProjectFarm Год назад

Thanks, will do! Thanks for sharing.

@FoxSquad32 Год назад

I love watching his channel too because I learn new things. My lawnmower’s pull cord broke and I was like shit I need to finish the lawn. Thank you @@ProjectFarm for showing me how to start my mower with an impact haha

@o0Avalon0o 4 года назад

I'm so glad to see such a critical, hard-working & honest channel be celebrated.

@ProjectFarm 4 года назад

Thank you very much!

@evicdes728 4 года назад

Could you do fiber fix repair wrap versus flex tape fiber fix repair wrap claims to be 100 times better than duck tape

@VAILEAN 4 года назад

@@ProjectFarm you need to redo the test on extractors. As a maintenance man I would never have a broken bolt that would have a load on it. And if it did have a load on it. Say like rust I would soak it in a penetrating oil first before extraction. I do think the drilling part is a good test for the drill bits for the extractors but most of the time the extractors will never meet there max torque rating like your test indicates. I would think a test for a the extractors could be done daily if you drilled a and taped holes in a pice of 3/4 inch steel and submerged it in water so it rust the stap the heads of said bolts off and see how well it extracts the bolts out then. No external forces contaminating the experiment just the rusty broken boldt in the steel vs the exstractor. I would love to see that vidio. This was a great vidio in its self for showing how the perform under a load and what torque used before failure.

@George-nx5lo 4 года назад

VAILEAN stfu

@jalawialotaibi6639 4 года назад

you can’t imagine how much I rely on your channel before I do a purchase, thank you for all of this

@ProjectFarm 4 года назад

Thank you very much!

@rustyshacklefordspocketsqu8162 4 года назад

he switched me from lepage 5min epoxy to jb weld. lepage is good but jb weld is incredible.

@ThatGuy-ix6uq 4 года назад

I've used the short style irwin. Including the left handed drills is a plus but they haven't failed me yet

@ldfelix 4 года назад

legit. my whole office does!

@AbeVanDyke 4 года назад

Amen 100% agreed. I basically look to make sure what to buy when look at anything I need these days because he’s completely unbiased and uses science for proof.

@alanj7306 2 года назад

I’m always impressed with Irwin when you test them. For the money, they really do a pretty good job and are good quality. I have a few things of theirs that I’ve collected over the years. I say collected because I still have them and they still work. Another great video 👍

@ProjectFarm 2 года назад

Thanks! Thanks for the feedback.

@DapimpBDSD Год назад

Irwin is a but of a undervalued brand. There stuff may not be the best, but in my experience, they get the job done at a decent price

@mococaboy17 Год назад

bullshit i had two of them snap off now im f $$&

@alexandergrahamcracker5581 6 месяцев назад

@mococaboy17 mine work great. No problems yet. Bummer for you man, but it's not BS. They work great.

@bajajoepoker 5 месяцев назад

this made me LLOL (first L is literally) Hope u got your projects done @mococaboy17 !

@lm-usmc 2 года назад

This test saved me alot of grief and I'm sure money. 4 screws were damaged on my rifle receiver, and could not be removed. I bought the Grabit Pro set, and made quick work of the screws. Saved me possibly taking it to a gunsmith or machinist. Thank you!

@ProjectFarm 2 года назад

You are welcome! Glad to hear!

@bigpicturethinking5620 4 года назад

I like how you just decided one day you would give Underwriters Laboratory a run for its money. And then you followed through with it. Come up with a PF seal of approval.

@WorkNHard 4 года назад

Seriously a great idea...🤔

@dreded7961 4 года назад

this is actually a fantastic idea, I would definately buy products with PF approvals on them over anything else

@davidck1 4 года назад

PF you. doesn't sound as good as you thought...

@tylerchaney1533 4 года назад

I like that idea! Im already buying goodies based on his testing👍

@jamessoto3434 4 года назад

Loved the video and information... I have a broken off bolt on the exhaust side of my vehicle resulting in a huge exhaust leak... I found the UNBIASED, UNSPONSORED opinion on project farm... I've suscribed, and project farm is my ONLY source for true product comparisons. PROJECT FARM, DON'T LET CORPORATE AMERICA BUY YOU OUT!!!

@bloodruststaples 4 года назад

Your comparison videos are the best on RU-vid. Literally no room for bias, as equal and thorough as possible, and clearly a lot of effort put into your test videos, lots of info without excessive dialogue. Bravo, friend, quality stuff!

@ProjectFarm 4 года назад

Appreciate that!

@galenmarek8287 3 года назад

Yes sir!! I’ve bought many products after watching his reviews. They are second to none on the tube.

@crazyaboutbarton7698 3 года назад

Can't have anything nice from china anymore

@patmancrowley8509 2 года назад

@@crazyaboutbarton7698 Slave labor has its SERIOUS drawbacks. SLAVERY is the BIGGEST drawback!

@garymb609 2 года назад

@@crazyaboutbarton7698 Most if the reviews he does show the big companies being made in China even though they say they are made in America

@y0uRF4t3 3 года назад

Bought a set of 2 grabit pro extractors, removed a stuck bolt, worked perfectly, they still look like new. Thank you for this test!

@ProjectFarm 3 года назад

You are welcome!

@jimschaefer7827 3 года назад

Always enjoy your tests! Very informative! I also appreciate that your presentations have improved over some of the first ones. You seem more relaxed and less camera conscious! Looking forward to your continued tests.

@ProjectFarm 3 года назад

Thanks!

@ElJoeRN 4 года назад

Me looking at products in store: *This one has UL seal of approval. I guess it should be good? Oh wait, this one over here has a PF seal of approval, I'm taking this one*

@ProjectFarm 4 года назад

Awesome! Thank you for the positive comment!

@kiethkline7168 4 года назад

Agreed! I've changed up alot of the stuff I buy based on his tests

@tebibyte2357 4 года назад

I bought the Ryobi l but i guess best for value was Cleveland..? the bolt split destroying results

@omegarugal9283 4 года назад

the PF seal of aproval must be a real thing

@HopefulPessimist 4 года назад

@@ProjectFarm okay here's your next project. It's actually two fold. You know what I might just make a video and then send you the link.

@dennisnashville7114 4 года назад

I’m addicted to this channel. I watch every one. You never know when you’ll need to buy a gadget, and it’s nice to know which one to buy. Better than ‘Consumer Retorts’. 🤪

@ProjectFarm 4 года назад

Thanks for sharing.

@alex-xo7tz 10 месяцев назад

Thanks for this video. I bought a set of the Irwin extractors today and was able to remove a broken bolt from the crankshaft of my lawn tractor.

@ProjectFarm 10 месяцев назад

You are welcome! Thanks for sharing.

@meme-kd2km 3 года назад

Perfect review. Straight to the point, great tests and just enough info. I really despise the reviewers that go on and on and on just to hear themselves talk. Great job Todd.

@ProjectFarm 3 года назад

Thanks!

@crabmannyjoe2 4 года назад

One thing about these kinds of extractors, when they thread into a bolt, they can force the bolt to expand and make it a much tighter fit in the threads and make it harder to extract.

@ProjectFarm 4 года назад

Yes, great point!

@CrazyTony65 4 года назад

It's why the longer spiral ones work best, the helix is to steep to generate a lot of threading/expanding force. The secret to getting good performance from them is to get the hammered to depth right, that's the tricky part.

@ryanmickelwait1521 4 года назад

Yeah that's why left handed drill bits are the best solution

@perjernstrom5178 4 года назад

I use "LEGO-axle" style extractors because they do not expand the damaged bolt. Not sure what brand it is but they are straight pieces that have some sharp edges on them, and separate "nuts" that slide on the axle to wrench on. Also drills in the set. A poor man's version is to use torx bits! However, they usually split, and you have an even bigger problem.

@ganador13 4 года назад

I always hit the bolt first with PB blaster the day before, then cook it with a propane torch before extracting. Rust and ancient bolts can be stubborn.

@justinbeamon6624 4 года назад

"The plastic case is already broken" 🤣🤣🤣🤣🤣

@brendancarlson1678 4 года назад

And that other set had the company logo sticker on crooked. Wtf?

@cove81 4 года назад

I own that set.... It's sh*t.

@alant956 3 года назад

Really enjoying your videos, thanks for the work and info....gonna save me money and time for sure in the future. Thanks very much!

@ProjectFarm 3 года назад

You are welcome!

@damxgopak457 4 года назад

Been wrenching for 40 years and don't remember ever having those work at all.nice test thanks.

@ProjectFarm 4 года назад

Thank you!

@wheatdevon 4 года назад

@@ProjectFarm reverse pitch drill bits.

@Inviting1word 4 года назад

It's because you needed it to work. That's when they don't is what i'm learning.

@benjyking500 4 года назад

"The screw appears to be made of a harder material than the extractor" 😂😂😂

@ProjectFarm 4 года назад

Thanks for the feedback.

@EagleEye8208 4 года назад

Often a big part of the problem. It'd be fine if the extractor cost as much as the screw.

@notajp 4 года назад

It’s a Ryobi. What else could you expect?

4 года назад

@@notajp I'd expect better as their power tools seem pretty good.

@AlexVD1996 4 года назад

@ i only use ryobi power tools and I love them.

@wsmaga 2 года назад

Awesome review thanks. I never believed in these screw extractors but today my friend used his at work and now I’m a believer. He has the Irwin set and it surprised me at how easy it worked. I’m def buying the Irwin kit.

@ProjectFarm 2 года назад

You are welcome! Thanks for sharing.

@ingaderas 3 года назад

I've had the $11. Irwin kit for a few years. Only the smallest extractor broke on me. This kit has saved me tons of $ and time. I will buy again.

@ProjectFarm 3 года назад

Thanks for sharing.

@hugolafhugolaf 4 года назад

I'm always amazed at the lengths/ingeniosity Todd goes to establish a baseline and a neutral way of measuring performance. His methods and contraptions come off as as scientific as it gets. I do miss the flame-spitting Farmabaggo though.

@TheRoadhammer379 4 года назад

ingenuity

@ac.creations 4 года назад

"straps blower fan to farmabego rv"

@WineScrounger 4 года назад

He shows, again and again that you can do proper science at home and get useful results.

@gabrielcornejo238 4 года назад

His name is Todd?

@owenparker6651 4 года назад

ingeniosity - now that, my friend, is a $20 word! :)

@amigojones5962 4 года назад

Nothing to recommend or say, just leaving a comment to help a great channel with the algorithm.

@ProjectFarm 4 года назад

Thanks for that! Thanks for watching!

@beasyphone Год назад

I just happen to search this one as I own the larger Irwin set and unfortunately use it more than I'd like! Including recently a turbo flange bolt on a brand new mp8 MACK- OOPS. Irwin did not succeed but I still love the set. My bigger reason stopping in is I'm currently visiting my 80 yr old father working on his 58 chevy resto and was using some amazon brand he had that was garbage but we also brought you up about 100 tines while working. I'm a heavy diesel mechanic and my father is an ivy league engineer ; we both LOVE your videos, format, general posture towards these "competitions " and well have nothing but best regards for you in the future. Keep up the awesome content! 2 loyal fans

@ProjectFarm Год назад

Thanks, will do! Thanks for sharing.

@joesbarbecue1 3 года назад

Keep up the great work! This is by far the best channel of its kind! Thank you.

@ProjectFarm 3 года назад

Thanks, will do!

@DeShakeel 4 года назад

The amount of bolts I have broken, stripped or got rusted inside....and the amount I spent on extractors. This is a great video to highlight what I should buy next time.

@ProjectFarm 4 года назад

Thank you!

@dthorpe4855 4 года назад

After 55 years as a mechanic I've had my share of broken bolts, studs and screws and I found the the extractors that I purchased from Snap-On tools worked the best.

@1pcfred 4 года назад

Buy some discretion and patience if you can find any for sale.

@johngoffinett7808 4 года назад

@@dthorpe4855 and if it broke, Snap-on replaced it right?

@importdoc7 4 года назад

Paul Frederick it comes to those who wait

@williswhatchutalkinbout4367 4 года назад

“Annnnnd the case already broke” 😂😂

@ProjectFarm 4 года назад

lol.

@fm00078 4 года назад

That case sure looks pret... sure looked pretty.

@Kalvinjj 4 года назад

Off to a good start eh?

@robertdistelcamp3855 3 года назад

Thank you so much for posting this. I literally just burned through the Ryobi set and was afraid I was doing something incorrectly.

@ProjectFarm 3 года назад

You're very welcome!

@rhpicayune 8 месяцев назад

I’m sending you a small thank you 💰 Thanks for your integrity and unending labor to scientifically test all the products fairly.

@ProjectFarm 8 месяцев назад

Thanks so much!

@wujatt36 3 года назад

Do a video on the best curse word to use after breaking an extractor in a bolt hole.

@JuliaCV9 3 года назад

best one probably would be "son of a bitch!"

@Tim.1113 3 года назад

F*ckity, f*ck, f*ck.

@jamiekessler424 3 года назад

It's fuck

@thatbiguy1975 3 года назад

Simple, all of them

@jonrosenow5812 3 года назад

Plan D

@BGTech1 4 года назад

1:42 [insert slight scratches at a level 6 and deeper grooves at level 7 joke here]

@ProjectFarm 4 года назад

lol. Nice!

@needoliprane7114 4 года назад

Jerry !

@TurtleGlo 4 года назад

Waiting for this lol

@duditsgrey5148 4 года назад

Hahah perfect timing.

@60volttransistor34 4 года назад

I get it, thats a jerryrigeverything reference! hah I know my stuff LOL

@luke9822 2 года назад

Perfect video. Super concise and straight to the point. Exactly what I was looking for and failing to find.

@ProjectFarm 2 года назад

Thanks!

@scotto9683 Год назад

PF is basically my go-to for tool reviews and such. This video is just one of many that I have used to make informed decisions on purchases. Thanks for your work and I constantly recommend your channel to my friends and colleagues.

@ProjectFarm Год назад

You are welcome! Thanks for sharing the channel!

@ForrestOutman Год назад

Agreed I wish I found this channel years ago and saved myself from buying comparatively rubbish tools. Though I can say that this channel has made my large collection of Milwaukee tools seem like solid choices. Thank you so much for this valuable content. Told aren't cheap and the time they can save or the frustration caused by breakage or or performance isn't worth it.... These unbiased reviews with solid test parameters are fantastic

@rhino3292 4 года назад

Your videos are probably the most valuable videos on RU-vid! The amount of people who need these products and the depend on them is staggering. It's a shame most products don't do as advertised. I personally appreciate your time, effort, and dedication. Thank you!

@ProjectFarm 4 года назад

You are welcome!

@leifhietala8074 4 года назад

Here's a trick I figured out once when I was stuck with a stripped screw head: drill it a bit with whatever you've got, then tap in the point of a concrete nail or hardened cut nail. Even the point of a Tapcon screw might work. Keep tapping it in while applying torque to remove. The hardened steel will bite into the head of the fastener, and tapping keeps the edges embedded in the material so it doesn't strip it out. It takes a little finesse but it's worked for me on many occasions, enough that I don't replay my easy-outs anymore.

@Kalvinjj 4 года назад

Makes sense, literally makes a matching screw and screwdriver in the process, if I get it correctly.

@ProjectFarm 4 года назад

Thanks for the feedback.

@BuzzinVideography 4 года назад

Wow. Never thought of that. THANK YOU

@joshhayl7459 4 года назад

🔵 I've used the cut-nail trick for many years now and it usually works better than most extractor-"Systems", I just cut the cut-nail to the size I want for whatever screw/bolt I'm trying to back-out and gently grind the end flat, (being careful not to change the temper of it during grinding). Those cut-nails are made out of some damn tough stuff!!.... I made an adjustable sight ramp for my rifle out of one and over the years have used them for making quite a few other odd things, they're great for making shaft keys out of!..... I've always wondered what the 'specs' were on a cut-nail.

@Smaptastic 3 года назад

Been looking for this. Great test!

@ProjectFarm 3 года назад

Thank you!

@shoresy6927 3 года назад

I love this guy. Literally don't need this information but I cant help but watch. Ended up watching for two hours last night. I now know things I never asked about haha. Great stuff. Very informative.

@ProjectFarm 3 года назад

Wow, thanks!

@o0Avalon0o 4 года назад

I try to live humbly & be responsible with where I place my money & time. This channel is the best; always adapting, improving & searching for the best value.

@ProjectFarm 4 года назад

Thank you very much!

@DresdonAcacinTheOriginal 4 года назад

When the extractor breaks off in the bolt: "Oh look, it's time to start drinking" nah, weld a nut on with some really high amp mig, get it to spray arc. The intense heat is what is going to break that seized fastener loose.

@ProjectFarm 4 года назад

Thanks for sharing.

@donaldpowers3314 4 года назад

Yep I've seen this many times the last 20 plus years.

@scott2100 4 года назад

I've snapped an extractor in a bolt in a freshly removed cylinder head, it scared me more than anything else in my life. The machine shop I went to did exactly what you said

@SgtSabotage 4 года назад

I've done this myself many times. Works great in those hard to reach automotive applications.

@BuzzinVideography 4 года назад

Yep. Been there! .065 self shielding, 155 amps 21ipm or so. Just touch it. Lol.

@blackrat1228 2 года назад

Been using the grabit pro pretty often on the job and wanted to see how it did in your tests. Your experience mirrors my own, surprisingly effective for such a compact kit.

@ProjectFarm 2 года назад

Thanks for the feedback.

@anthonyrallo2764 2 года назад

Talk about detailed. These reviews are beyond professional. Thanks for taking the time to do such incredible work. We're partial to the Grabit Pro!

@ProjectFarm 2 года назад

Thanks and you are welcome!

@legallyfree2955 4 года назад

This has to be one of the most expensive RU-vid channels to watch. Every video it seems I have to go onto E-Bay and buy something...

@ProjectFarm 4 года назад

lol Thanks for watching.

@undertaker666dead 4 года назад

But the real question is how well will the bolt extractors do in the cold flow oil race?

@ProjectFarm 4 года назад

lol. Nice!!

@BixbyConsequence 4 года назад

"None of the extractors seem to realize the race has begun..."

@MrMartinSchou 4 года назад

@@ProjectFarm Honestly, you should do some kind of really silly joke video, where you test how good products perform at the wrong things. Like - how good are screw extractors at lubricating stuff, and do they fare better or worse when frozen and heated? Which tyre pump does the best job at removing screws and bolts, and which rust remover gives the best gas mileage improvement.

@michaelmay5453 3 года назад

This also matches my experience, the Bosh blue is really good on bigger bolts but on smaller bolts it's hit or miss with most brands. Don't really use it with smaller screws or wood screws so I can't offer anything on that. As always, really, really well done, you're the man.

@ProjectFarm 3 года назад

Thanks so much! Thanks for the feedback

@EdKrisiak Год назад

Whenever I need to buy a tool. I check Project Farm. Always has great content.

@rterry2752 2 года назад

I don't even need the information you post but find it so dang educational and you are so thorough.

@ProjectFarm 2 года назад

Thanks!

@gertvanpeet3120 3 года назад

Another set: left turn extractor and drill combines, set of 3, for 4 euro's... And IT worked every time! Greetings from the Netherlands!

@nam1971 2 года назад

Been waiting for this one for a while! Great as per usual!

@ProjectFarm 2 года назад

Thanks!

@sat_sonic Год назад

Thank you for this video. I used the Irwin set to remove a broken bolt from the side of the head of my Honda 3.5 (Odyssey) VVT solenoid.

@ProjectFarm Год назад

You are welcome! Thanks for sharing.

@ryanpoole916 3 года назад

I hope you know how much people appreciate your effort. You are one of the best channels on RU-vid man. Your ability to inform with an unbiased perspective is amazing! Thank you! From Lubbock, Texas!

@ProjectFarm 3 года назад

Thank you so much 😀

@HellhoundXIV 4 года назад

- Me: I need to sleep, I seriously need to sleep. - RU-vid: Yo, wanna watch which screw remover is the best!?

@ProjectFarm 4 года назад

Thanks for watching.

@trufix72 4 года назад

go back to your sewing shows then. Project Farm is doing a great job on testing. Helps me make a better decision on buying something

@ElHolyBoy 4 года назад

@@trufix72 who are you yelling at?

@Kalvinjj 4 года назад

@@ElHolyBoy someone forgot that being edgy on the internet towards others stopped being cool like 10 years ago

@ElHolyBoy 4 года назад

@@Kalvinjj Right?! It's a meme... HellhoundX was just being silly. I don't know why it has to get yelled at. Take care, Kal.

@GoNutsButch 3 года назад

Awesome! Thanks for sharing your findings!!

@VolksKrieger8907 Месяц назад

Was shopping around for an extractor set and realized that I need to start at your channel first - Went through a pretty serious tool buying phase this year and bought tools only after watching your analysis - You’re an awesome content creator and test engineer - Keep it up brother!

@ProjectFarm Месяц назад

Thanks, will do!

@samio5454 3 года назад

You’re without a doubt one of the best RU-vidrs with the most useful videos around, keep making amazing content

@ProjectFarm 3 года назад

Thanks, will do!

@samio5454 3 года назад

Project Farm Jesus your still replying and reading comments from a 3 month old video, that’s dedication

@joshuadrakard2981 4 года назад

I only knew these as EazyOuts and we use them in aircraft screens that get stripped or when the heads of bolts snap off. It's good to see multiple brands tested and I'm certainly coming back to these videos when I need to build my toolbox up again

@ProjectFarm 4 года назад

Thank you very much!

@lmadden6236 4 года назад

Nothing like Snap-On/ Bluepoint tools

@eatmoreeats9566 7 месяцев назад

im back here after 2 years, wow time flies. still a great informational video!

@ProjectFarm 7 месяцев назад

Thanks! Welcome back!

@TheGrabit 6 месяцев назад

Which one did you end up buying?

@RecSteady Год назад

You get an automatic like from me for not starting the video with a "Whats up guys!" Thank you for taking the time to make this.

@ProjectFarm Год назад

You are welcome!

@emmettcarr2988 4 года назад

Your videos are great man, I appreciate the effort you put into them.

@ProjectFarm 4 года назад

I appreciate that!

@Nigelv 4 года назад

Your technique is a little different than mine. I usually throw something then assuming the fetal position and start crying until someone else fixes the problem. But hey I guess you could do it your way if you want.

@steve7119 4 года назад

Im crying of laughter. I was changing cabinet hinges a month ago, and this was literally me I threw something and got pissed off and sad. Then my uncle came over with the speed pro and got the screw out.

@catalindeluxus8545 4 года назад

This resonates with me way too much! 😅

@abrahamdzyadyk655 4 года назад

I died laughing

@Absoill 4 года назад

I allways weld a nut onto it, and use a regular wrench

@casamia6655 3 года назад

I am so glad you did this! Been looking for a good extractor set!!

@ProjectFarm 3 года назад

Thanks!

@MedyaGh Год назад

Thank for doing this extensive test! Much appreciated

@ProjectFarm Год назад

Thanks and you are welcome!

@extraace 4 года назад

The only bolt extractor I ever had luck with is my TIG. 100% success as far as I recall.

@of777 3 года назад

Hello project farm, i just wanted to say thanks for your effort and time with your top notch videos. Straight to the point and no bs!!

@ProjectFarm 3 года назад

Thanks so much!

@TheCasaresway 3 года назад

I enjoy your videos man. Very in depth. Non bias. Thanks for your contribution.

@ProjectFarm 3 года назад

Glad you like them!

@Foppemoa 2 года назад

A part 2 of this would be neat, where you test extractors for very small screws/bolts. Since those seems to be the most fragile and difficult to use.

@ProjectFarm 2 года назад

Thanks for the video idea.

@HerezCheez 5 месяцев назад

@@ProjectFarm Is there part 2?

@marcodallac 4 года назад

Me: has always watched RU-vid for music and videogames RU-vid: *what about some good old Bolt extractor*

@ProjectFarm 4 года назад

Thank you very much!

@gergc4871 4 года назад

You tube : *you need some real world skills kid*

@scinto23 4 года назад

@@gergc4871 lmao

@rcnelson 4 года назад

The amount of work PF puts into these videos is impressive. And they're very informative to boot. I haven't used my 20-year-old Craftsman easy-outs yet and hope I never have to.

@Utking3 3 года назад

Really love your videos! Thanks for making them :)

@ProjectFarm 3 года назад

My pleasure!

@timlamarre8680 6 месяцев назад

Thank you for posting this. Very informative!

@ProjectFarm 6 месяцев назад

Thanks and you are welcome!

@LycanWitch 4 года назад

Weird how many of the American brands list measurements in metric, but the European brands list in US Imperial.

@mehere8299 4 года назад

Raven The German brand has US-specific packaging; they do sell in Canada, but in the same packaging they use for UK/AUS/NZ. Most of the other brands have US/Canada/Mexico packaging.

@Ofthehunt 4 года назад

Probably because they're also sold in Canada. While the German's label was made specifically for the American market

@KriegerDelfin24 4 года назад

Rennsteig makes quit good Tools. So i was kinda suprised with the result. One of its flaws is how it removes bolts. If you have a soft Material it will just sheer it

@locouk 4 года назад

Raven Here in the uk, we sell gasoline by the litre, beer by the pint and milk is equally sold by pint or litre depending on the shop. Maybe America should adopt the British system :0)

@danielwilson5102 4 года назад

@@locouk We don't sell "gasoline" at all. We sell petrol thank you very much.

@Blue-bf8lv 4 года назад

I'm still extremely impressed on how fast you produce videos all the editing,testing, processing yet you make multiple videos each month

@ProjectFarm 4 года назад

Thanks for sharing.

@charlesluke2655 Год назад

Thank you for the thorough review of these bolt extractors. I purchased the Irwin based on your review.

@ProjectFarm Год назад

You are welcome! Thanks for sharing.

@frankwilliams7280 2 года назад

Wow...! Thanks for all the thinking and work that went into the test and for bringing a bit of material science to us all.

@ProjectFarm 2 года назад

You are welcome!

@kevinzalewski1465 4 года назад

Omg your timing is impeccable I literally needed one yesterday but I did t want to get anything until I watched you video first to see if you had done a test. And of course you hadn’t. I felt scared and lonely. Now I feel complete!!!!n!

@joshhayl7459 4 года назад

🔵 Since it takes literally less than 20 seconds to go back and edit/correct a RU-vid comment post after it's been sent, I have to wonder what you mean by the letter "n" after the exclamation marks at the end of your post!?

@kevinzalewski1465 4 года назад

Josh Hayl it’s there for moral support

@Subsonic-cd2en 4 года назад

Right now, somewhere in Germany, the engineer responsible for the Rennsteig brand is being shot.

@StillNoPickles69 4 года назад

Maybe if it was North Korea or something lmao

@Dr.Westside 4 года назад

If it was 1939 you might be on point .

@Encom0 4 года назад

But only after he has answered a few questions. Past me the desk lamp Hans.

@hawkdsl 4 года назад

That's f'ing funny. Of course Germany is not like that anymore, but you know what they say. A bad reputation is hard to lose, and a good one is hard to get.

@Encom0 4 года назад

@@hawkdsl I totally agree, those last two away matches weren't the best. Like the Spanish still living down the inquisition in some quarters, and that's over 500yrs ago. Blame Monty Python - I do :)

@blacksheepboyz 5 дней назад

Again the old stuff was very useful. Thanks!

@ProjectFarm 5 дней назад

You are welcome!

@jrw_8316 2 года назад

Excellent video right to the point, nice demonstration and THANK YOU for the chart thats super helpful!!

@ProjectFarm 2 года назад

Thanks so much!

@ranat5526 4 года назад

What would the world be like without Project Farm Channel!!

@ProjectFarm 4 года назад

Thank you very much for the positive comment! It keeps me going!!

@joshanderson1019 4 года назад

the world would be full of lies

@mgrantom 3 года назад

I really enjoy watching your videos! Thank you for your well thought out, concise testing. You are furnishing an invaluable resource. Keep up the good work!

@ProjectFarm 3 года назад

Thank you! Will do!

@hughclark4220 3 года назад

Many years ago , I used a Rothenberger kit , it was quite expensive but the best I have seen . Keep up the great reviews . Thanks .

@ProjectFarm 3 года назад

Thanks, will do.

@dans9228 7 месяцев назад

Thank you for this great video. I was in need of an extraction kit and found all the data I needed in this video!

@ProjectFarm 7 месяцев назад

You are welcome! Glad to hear!

@nicholashelms2395 4 года назад

You're the best youtuber not mainly becuase of your content but becuase of how hard you work when making these videos and becuase of how genuine you are.

@ProjectFarm 4 года назад

Thank you so much 😀

@Eden_M 4 года назад

Sometimes it's so hard to keep a straight face when there's a camera in front of you but man.... that giggle, you killed me! 🤣 Edit: Maybe you could make a "bloopers special" that would be great for sure!

@ProjectFarm 4 года назад

Thanks for watching!

@craigerickson1910 3 года назад

This is NOT a bolt extractor test. It's a screw extractor (aka EZ-out) test. Other than not what I'm looking for it's a good test. Nice honest, well informed unbiased job as usual for you. I need a bolt extractor to remove a hex head bolt with rounded corners.

@randylplampin1326 2 года назад

I appreciate your thoroughness very much. Keep up the good work!

@ProjectFarm 2 года назад

Thanks, will do!

@pr0xZen 4 года назад

Really like the speedout type for smaller stuff as it gets a decent grip in a shallow hole/divet, but honestly, when it comes to small but good extractors IMO they gotta be considered consumables because of how brittle the good ones tend to be. So keep extras. For really small philips and pozidrive, there's the rubber band. For the bigger stuff, not getting the sheared bolt out can be so much trouble and costly, proper quality is always a worthy investment. Amd if there's a nubbin still sticking out, welding on a nut or another bolt, thermal treatment etc is also an alternative. If you deal with stuck bolts a lot, induction heater coils are gold. And have gotten fairly cheap to DIY.

@Mekhanic1 4 года назад

A torch is the best extractor. It can't be stuck if it's liquid!

@appalachiangunman9589 4 года назад

I little heat from a torch will loosen a rusty bolt right up too.

@jezuzfreek777 4 года назад

A torch can loosen a bolt but liquefying it is not always a practical solution. You have to be careful not to destroy the threads that the bolt is imbedded in. The best rule of thumb is to try an extractor first and add heat if needed. Most of the time you are using the extractor because the head sheared off of the bolt

@Rapunzel_thicc 4 года назад

And that’s a fact

@ProjectFarm 4 года назад

Great point on the torch

@bdetert82 4 года назад

Once I went torch I never went back. Little bit of heat will loosen just about any stuck bolt. Way better than snapping heads.

@richardgoff6739 Год назад

Very professionally done. Gained a lot of knowledge about these extractors...thanks

@ProjectFarm Год назад

Thanks and you are welcome!

@herbiesgarage681 Год назад

You really are doing a great service with your videos! I bought a set of Dr Walt drill bits just because you ranked them very high and are affordable, I use them all the time on my job and they work fantastic! Thanks for all that you do

@ProjectFarm Год назад

You are welcome! Thanks for sharing.

@user-sb3wh3dd4v 4 года назад

From personal experience... For small jobs like those in this video, Instead of standard left-twist extractors, I use a small diamond cutting wheel in a dremel to cut a slot, then use a straight, flat-blade screwdriver to twist the screw or bolt out. It helps to have a LARGE old American-made screwdriver or a modern Teutonic tool. Cheap imported screwdrivers tend to break or twist too easily. If this is for a machine application, (metal to metal) then I apply some WD40 or Seafoam penetrating product first. Really stubborn bolts that have been work-hardened and rusted (as on old heavy machinery or large sea-going ships) require all those techniques plus HEAT from a blow torch, then a sudden freeze with compressed air. I used that last summer on an old tractor that had been sitting outside for decades. It worked. These techniques usually work. And if none of that works, then it's time to drill, fill and re-tap. LOVE this channel! Always great info and well presented too. I usually don't comment, but this one time I wanted to share these techniques which have helped me over the last fifty-five years, and helped my dad long before that. Best wishes to all. Stay healthy. Resist tyranny.

@ProjectFarm 4 года назад

Great tips!! Thank you very much!

@jimmoody1662 4 года назад

I do the same especially resist tyranny

@Kalvinjj 4 года назад

"[...] require all those techniques plus HEAT from a blow torch, then a sudden freeze with compressed air." Damn you literally quench the bolt to remove it! Tho I can understand this, makes sense to want the head to be hard enough to not strip yet again, ever had a head snap completely doing that tho? Sounds possible... and annoying.

@mikemorrison4860 4 года назад

Yeah!

@blahorgaslisk7763 4 года назад

@@Kalvinjj In most cases you won't be able to or even want to heat it enough to actually harden or temper the metal. It's more about causing it to expand and contract to break the surfaces loose.

@jezuzfreek777 4 года назад

As a professional millwright with over 20 years experience I can assure you that the Irwin fluted style extractors are pretty much the go to standard. If you strip one, drill a little bigger and get a new bite.

@ProjectFarm 4 года назад

Great feedback!

@kylefowler5082 3 года назад

I purchased the Grabit Pro based on your testing, thanks for your hard work!

@ProjectFarm 3 года назад

You are welcome!

@pxjydz303 3 года назад

Fantastic review, like always. I've never heard of the Cleveland brand extractors. I was happy seeing the tools performance even considering the premium price. I'm going to do a bit of research but if these are made in my backyard I'll be picking up a set soon.

@ProjectFarm 3 года назад

Thanks for the feedback.