Best Ever Guitar Neck Reinforcement Video (Deep Dive)

Подписаться 10 тыс.

Просмотров 21 тыс.

50% 1

So, you wanna do some neck reinforcement. What to use. This video takes the discussion deeper than most other videos I was able to find. Hope you enjoy the information…but feel to make it a conversation. Just remember… ”what works for you…is right for you!”
Maximum Guitar Works is a custom guitar shop based in Colorado USA. We are passionate about creating the highest quality instruments to meet the exact requirements of our customers. Not only do we create personalized custom guitars, we manufacture high quality production models, produce custom parts and accessories, and provide instruction for enthusiasts via our RU-vid channel. Our passion for excellence is evident in everything we do!
Make sure you subscribe to the Maximum Guitar Works RU-vid channel so that you don’t miss out on future videos. Feel from to post comments and/or questions below. You can also contact me directly at info@MaximumGuitarWorks.com.

Опубликовано:

19 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 165

@brunocejas 3 года назад

This is actually the best ever guitar neck reinforcement video.

@maximumguitarworks 3 года назад

Thank you so much Bruno...I am sincerely happy that you found the information useful.

@coltjoey6773 2 года назад

Instablaster

@bluegrassdude Год назад

Yes , I concur! Most informative. Especially when building light weight!

@maxwellspeedwell2585 6 месяцев назад

But w a a y too long.

@jerryjaystone9444 Год назад

I for one am grateful for the time you've put in on this. Now I don't have to and it NEEDED to be done!! Great channel

@thomaskolb5444 3 года назад

So great! That’s a real engineering approach! Good to have facts to stick to. Thank you very much!

@mikeivey8471 3 года назад

Great information !! Answered a lot of questions for me !

@arcarioandsons 2 года назад

Hot damn is it refreshing for someone to put a video out about this that isn't laden with BS

@maximumguitarworks 2 года назад

Thanks. I try to be objective...but in the end we all have biases that we must deal with.

@jonaskellander Год назад

Love the attention to detail and of course the excellent humor! Keep it coming! /Jonas

@riffraff1350 2 года назад

Fantastic information here. Really lives up to its title as Best Ever.

@TeamUltraSlow 3 года назад

Excellent as usual. Very informative!

@dag410 Год назад

Great video! Steve is a great teacher!

@trichinosis333 2 года назад

I like a lot of tension playing extreme metal so I built a baritone flying V with 28.5" scale, in A#, 13-72 strings. I used dense mahogany in the neck & reinforced it with two 1/2" round graphite rods. That's about the limit of what you can fit in a 6-string neck, and it's extremely strong & stable and sounds amazing. Absolutely love it.

@russlgtr Год назад

Epic true engineering. Cool. Much respect appreciate this!

@tzed2509 9 месяцев назад

I'm currently designing the neck for my Firebird project, thanks for this excellent info.

@patrickstover8766 9 месяцев назад

Excellent video, Thank you!

@yoheff988 Год назад

Very cool video!🤟

@MG-vo7is 2 года назад

Very cool. Thank you!

@bonifacpope5282 2 года назад

Thanks for this great video! No mambo jumbo marketing bull..., but a profound fact-based approach.

@stevenfolino405 2 года назад

I just watched this. At the end I stood up and applauded! Thank you for the deep dive and bringing us along. I think your test jig was awesome. Even before you said anything I thought, “ that must be some sort of contraption to test them!” I was right! This is why I watch your videos and buy your stuff! It is the combination of knowledge and sarcasm that I appreciate the most! You really do need to do a video about materials that you use. I was going to ask you what type of epoxy do you use or do you suggest? Thanks Steve!

@jafo1970 3 года назад

"This represents... way to much time invested..." deserved -- and got! -- an immediate sub.

@liamburgess1150 Год назад

amazing video, definitely going to stock up on carbon fibre hollow tubes for reinforcement

@IhabIAmer 10 месяцев назад

Impressive!

@VCustomShop 2 года назад

Great job Steve! You saved me allot of work because this is the stuff that keeps me up at night!! It would have been interesting to have tested the .200 x.250 rods on the side (flat sawn'ish laminates) to see what the difference is in strength.......

@mesauser02 3 года назад

I've learned a ton watching and listening. These videos help boost my confidence to get out there and take on the next step in building my first guitar. Thank you, and keep posting!

@maximumguitarworks 3 года назад

Thanks for the comment Chris...keep watching...I'll try to keep posting as time and ideas present themselves.

@bocote3119 3 года назад

@@maximumguitarworks Do you know where I can buy those titanium truss rods?

@maximumguitarworks 3 года назад

The only place I have found them is to order directly from Tatsuta of Japan..They are not cheap...but the quality is very high! tatsuta.theshop.jp/items/31059269

@fat-hand 3 года назад

@@bocote3119 StewMAc also sells them: www.stewmac.com/luthier-tools-and-supplies/materials/truss-rods/non-adjustable-rods-for-neck-reinforcement/titanium-neck-reinforcement-rod/

@edadpops1709 2 года назад

Great video👍

@alexbrandauer606 3 года назад

You’re GREAT)) thank you very much for your curiosity!! I’m a physicist and it’s very useful for my guitar work

@maximumguitarworks 3 года назад

Thanks Alex. It might have not been a test up to a higher educational standards...but it was just enough to help me make some decisions. I appreciate the comment.

@jasonpowell3762 8 месяцев назад

I love this video

@areuaware6842 Год назад

Well done!

@domacimacak7502 Год назад

Thanks so much sir

@anthonyglaser929 2 года назад

This video has been a huge help. Very informative.

@maximumguitarworks 2 года назад

Super glad to hear. I'm an engineer at heart...but not in documentation!

@richardcarpenter154 Год назад

My 89 studio had ebony love it

@victortatu Год назад

I had Carbon reinforcements rods installed in one of my guitars. The biggest diference i noticed was how fast the guitar responded to the pick attack. We figured the neck deflected way less when playing. So we did a little experiment, we got a good guitar without neck reinforcements (an Ibanez RG Prestige) and mine. We fixed both guitars to the table with a dial indicator at the tip of the headstock. As we applied pressure to the string we would se the indicator moving as the neck bowed. Now, when we tried that with the guitar with reinforcements, we noticed that the neck wouldn't move even 1/3 of what the ibanez neck did. And yes the ibanez was in perfect playing condition... So, if you think about installing those in an old guitar just have that in mind. Your neck will be stiffer and will feel stiffer, and the note attack will be much faster, if you believe you will like that, go for it (I loved it). "Tonewise" that's the difference i noticed the faster response of the instrument, either you played louder or quieter. Maybe a litttle bit more of the 1/2 harmonic nodes (but just maybe). As far as eq goes i didn't notice anything.

@Shem8100 3 года назад

Really satisfying video about neck reinforcement! It can't get any better than this. 👏🙌👌👍🥂

@maximumguitarworks 3 года назад

Wonderful to hear that nerdiness is appreciated by others. ;-)

@Shem8100 3 года назад

@@maximumguitarworks sure... the time, effort and detailed info you include in your videos are close to non. Kudos to you! 👏🙌✌🥂

@jeffcrist2977 2 года назад

Do the "bow" test on the different neck woods we use. Uniform cut outs. As close to the same quarter sawn angle as possible. Same length. I'd pay to see that one.

@tsiggy 7 месяцев назад

Great video and my type of humour.

@ricardoramos9135 3 года назад

Very good. Thanks.

@maximumguitarworks 3 года назад

Glad you enjoyed it. I have a very curious brain.

@walterrider9600 2 года назад

thank you .

@restoreguitars Год назад

Thanks x

@teemunator 3 года назад

Good video to explain this topic! Just soon getting my Ibanez RG that has titanium rods innit and 5 piece neck. I particularly hope that give some stability with climate changes throughout the seasons. Where I live there is roughly around 60°C (140)°F range in temperature between summer and winter for winters been usually very low humidity and summers high (as that effects tough vary from guitar to another). Many of my guitars have had issues usually in summers where they lose some playability and needs to be adjusted as I use rather low action in general.

@maximumguitarworks 3 года назад

I have to believe that you will be fine with that new neck!

@suspectdown5133 2 года назад

Wish I would have found this video before I fixed the truss rod and redid the fret board on my 1988 Casio PG 380 (high end synth strat) maple neck, ebony board. I replaced the route over the rod with the solid carbon fiber. The channel is curved. I curved the CF to fit the rod and channel shape before "gluing" it in leaving some sticking out. Had fun trying to rasp file down to the wood. Next time I will use the hollow CF on each side and MAYBE run wires to the neck and head stock ? (guitar has its own power) Now about the greatest stress or tension. Pull is from the nut/head stock (or end) to heel (if a bolt on) String up, put an indicator on the head stock. Loosen all the strings and it drops A LOT. This may not apply to a thru neck as much ? So with a floyd rose your neck is waving to the audience. So pulling in the middle seems to be only half the test. A horizontal pull end to end maybe ?

@mauikrawalski1074 3 месяца назад

An equal length and geometry of the cross section is important when comparing the stifness. The titanium has a different dimensions, according to it´s cross section, than the maple and carbon rods.

@rb032682 2 года назад

My favorite "tonewoods" are aluminum and graphite-based materials. On the drop test, I vote for the hollow graphite rod.

@Arwndr 8 месяцев назад

Wow.... This is not insanity... This is Excitement!.... Nice tests! By the way, i didn't find any carbon fiber truss rods... But they are quite easy to make by itself...

@juliansuarez3849 3 года назад

Love your clases

@maximumguitarworks 3 года назад

Thanks Julian!

@stevesstrings5243 2 года назад

Great information! New subscriber!

@maximumguitarworks 2 года назад

Thanks...sorry for the late reply.

@anaphylastiks 6 месяцев назад

Just found this video. Trying to DIY fix and experiment with my guitar. If the neck is bolt on, reinforcing it with too thick a hard wood, would then place lots more tension on the neck to body join?

@mattsta1964 Год назад

Modulus of elasticity of titanium is about 140GN/m^2. Steel is about 200-210GN/m^2, so steel is considerably stiffer then titanium, but has a weight penalty. Unidirectional CF has an even greater MoE than steel is is much lighter than any of the metal alternatives. CF is the preferred choice every time.

@BobStCyr 2 года назад

I have spent lots of time in Spanish luthier shops - never seen maple put in a neck. I have seen ebony of various dimension and configurations. I've only been in dozens of the top luthier shops (Contreras, Ramirez, Conde, Marin, Belido, Pardo, Ferrer,... etc.) but never seen maple used.

@DavidGonzalez-ts9xf 10 месяцев назад

I would be nice if you test 1. Truss rods doing the same experiment and 2 a complete neck with and without carbon rods. Please do such a video.

@leif-andersbanan5590 3 года назад

Nice vid! Love the academic approach! Knowledge from arrow nerding says that the outermost layers provide the most strength against flexing. Inner layers do add strength but not as much. Carbon fibre tubes are also the stiffest material availabe (in reasonable price range at least) for the weight. (compared to wood, heat treated bamboo, fibreglass, aluminum) Basically never takes a set, breaks before it does. You seem to have built an inverted version of an arrow spine tester! (where they hang a weight and measure the deflection) So a thing I thought of is depending of where you place the carbon you would get greater resistance to string follow. Putting it as a skunk stripe is would be the strongest position, given the glue holds and it doesn't pop out. Two in line sounds better for resistance to twisting of course.

@maximumguitarworks 3 года назад

Thanks Leif. I'm glad you found the video...and appreciate the approach. I'm not the smartest guy in the world...but I am fairly pragmatic...and like feeling like I do things for a good reason. At one point I stayed away from CF because everyone was doing it...that is when I went to titanium. Sometimes people do things because they are cheap...or easy...but not always because they are better. I found that CF is relatively cheap...easy to install...and in my tests it proved to be a better solution. That was the knowledge that I was after.

@DavidGonzalez-ts9xf Год назад

Hi- can you do a similar test comparing truss rods with and without. Carbon fibers? Also comparing quality of truss rods. Thanks!

@Studio-ffft5 4 месяца назад

Great comparison and very informative. Technically, you are measuring load at a specific beam deflection. Since the cross-sections of the beams you are testing differ from sample to sample, it’s not quite a pure analysis of the strength of each material as much as it is a comparison of the beams with the predominant factor being the difference in strength of each material plus the geometric effects. One nit is that you are measuring load, which is in pounds and this is not a pressure but rather a force. Hope this helps and thanks for your analysis.

@rb032682 2 года назад

I like your test jig. I think it was a legitimate test.

@VinodJadavani 7 месяцев назад

Good

@bobsegar1242 3 года назад

the you can't handle the truth killed me lol

@BobStCyr Год назад

Excellent look at the rods in isolation, but there are other questions. What about the glue? Ultimately if the glue is not at least as strong as that carbon fiber it will let the whole thing down. So we need to run tests with the reinforcements glued in place. The other thing to consider is, don't we need to measure the actual strength of the whole neck, with and without the various materials glued in place? That 1/4 by 1/4 inch bit of carbon fiber is 10 times the strength of the maple but that is only a small portion of the whole neck. How much stiffer is a neck with a carbon fiber rod in it vs no rod - it's not going to be 10 times. Also, wood moves - humidity changes cause wood to shrink and swell plus the constant pressure of the strings may cause it to bow over time (yes that's what the carbon fiber is there to resist), since the force is changing due to humidity changes we need an adjustable rod in the neck.

@amitsapir2 3 года назад

Steve if the deep dive videos were to become a series, that would be awesome

@maximumguitarworks 3 года назад

That is a good idea Amit. I think that I will put this video into a "Deep Dive" playlist. The only problem...is I really didn't set out to make a deep dive video. It was going to be a quick video on the strengths of different neck reinforcement methods...then I got obsessive! That is so unlike me to get obsessive. ;-)

@mursicman Год назад

Very informative videos Which size (cross section) of the carbon rod is best suited for a bass guitar?

@DavidRavenMoon 3 года назад

I use carbon fiber in all my necks. Poplar (tuliptree) actually makes a great sounding neck. I’ve used it, and that’s what Danelectro used back in the day.

@maximumguitarworks 3 года назад

Seriously? I did not know that. Sure is a light neck.

@MarkHysteria 3 года назад

Amazing informative video! and please do the video comparing truss rod materials ;)

@maximumguitarworks 3 года назад

Thanks Mark. I will keep it in mind.

@briansmith9698 3 года назад

Maximum Guitar Works what about steel rods and steel tube rods? Old Harmony guitars had steel reinforced necks Martins had steel Tbar rods later martin had steel tube rods also before rods Martin used Ebony in the necks. Do video on rods I mentioned.

@cowdudeable Год назад

The reinforcement I am looking for is the neck area directly under the nut, the weakest part of the neck. If you were to continue the slots into the headstock, would that make that area any stronger?

@piptyson5512 Год назад

Any thoughts a year later? Had these rods in a neck(s) for awhile? Bout to build a neck, wondering about the stiffening choice...

@TheXxPSYCHO 12 дней назад

Do reinforcement inserts affect the degree which the truss rod can adjust?

@TomL- 3 года назад

Great video! I guess that I don't have a complete understanding of truss rods, it would seem to me that all of that extra stiffening would make it more difficult for the truss rod to do it's thing. Does it increase the stress put on the truss rod to manipulate the neck?

@maximumguitarworks 3 года назад

A truss rod is to correct movement in the neck wood due to changes in the weather. A more rigid neck is not affected as much by these conditions as a less rigid neck. That is the primary reason for quarter sawn and/or laminated necks....as well as neck reinforcements.

@anaphylastiks 6 месяцев назад

Would bone be any good for reinforcement?

@johnmeehan4518 3 года назад

Nice. And a bit of insanity.

@rogeriogamaarquiteturaefoto 5 месяцев назад

e com o tempo, o braço empena ou não?

@ccchicken8889 3 года назад

A lot of bass guys like steel rods, they say it helps eliminate dead notes. Been wondering how they'd work in a guitar. May end up a bit neck heavy on the negative side.

@maximumguitarworks 3 года назад

Didn't know that about basses. Even for a bass guitar...it seems like it would be too heavy. Need an extra long upper horn for balance I suppose. Although...sometimes you never know until you try it.

@scottakam 2 года назад

Lots of great info. I'm sold on the carbon fiber tubes! What does the titanium truss rod get you over steel? Seems like just lighter weight. Steel is already strong enough so the extra strength is wasted.

@maximumguitarworks 2 года назад

Titanium is higher strength to weight...so it can be stronger. I think maybe too strong...if that is possible. Plus...titanium sounds cooler.

@PaulWilliamsheiowge 2 года назад

Great vid. I have a question relating to Bass rather than guitar. Hope you can help. I'm building a 6 string bass with 16mm spacing at the bridge. I'm undecided on number and type of truss rods and number of carbon fibre rods. One builder says 2 truss rods and 1 carbon fibre, another says 1 and 2 carbon fibre; and a third says 2 and 3 carbon fibre rods. What do you think? I have a couple of 2 foot single action truss rods. Can I use them or am I better off getting double action? Thanks x

@maximumguitarworks 2 года назад

Sorry for the delay in getting back to you...I have been off RU-vid for a while as I deal with life. I do not have a good answer for you as my experience does not include building bass guitars. Generally my rule of thumb is that you can't have a neck that is too ridged. However, two truss rods and three CF rods seems a little excessive to me...which is a strange thing to say. Wish I could be of more help.

@willieboy8798 4 месяца назад

i could find any mojo, so i settled for coffee instead....? edit is that the right joe???? jo now imconfused....

@jonahguitarguy 3 года назад

I've always been a little skeptical of the need for more reinforcement than the truss rod already provides. I see it as more of a selling feature as in "well we use CF in our necks so buy our guitar!" After all the Holy Grail (for many) of all guitar tone and quality are the 50s Les Pauls. Now they certainly didn't have CF in the necks. As a side note though a little CF spline at the neck/peghead wouldn't have hurt a thing. Right? So that and the cost of CF have held me at bay. Now with your research and cost information "I have to face stupid reality again" Thanks!

@DavidRavenMoon 3 года назад

The CF reduces the chance of having dead spots on the neck, the way many Fenders do. Stiffer necks are always better sounding. And Gibson could mostly eliminate broken headstocks if they used a scarf joint instead of band sawing the head angle. Maybe a shallower angle too.

@ashscott6068 2 года назад

Great tone only comes from great songs. If the song is great, the tone - whatever it sounds like - BECOMES great. So I wouldn't even worry about it, tone wise.

@Bloodysugar 2 года назад

Truss rods are already a selling feature... Many people are avoiding products like Vigier's guitars because there's no truss rod thanks to a CF beam (providing more flex resistance, lighter necks and more vibration transmission, aka sustain, than a truss rod). Even without talking about CF beams, a laminate neck made of really good wood is already strong enough to not have a truss. Thing is Gibson invented truss rods because they do not use such construction / wood quality.

@alexanzalonebass 3 года назад

Hi and congratulations !! ... so between the solid carbon bars and those with holes, which are the most resistant? Thanks

@maximumguitarworks 3 года назад

Seem the same to me as far as bounce back.

@pops71 3 года назад

Wicked awesome video Steve! I thought I was the only one to agonize over these things. My only concern with the tubes is tone. I try to have minimal air space in my necks. But who knows, they may ring like a bell!

@maximumguitarworks 3 года назад

You will have to do a blind test Mike...see what you think.

@Bloodysugar 2 года назад

Observing carbon rods being 10 times more flex resistant than maple is, almost, in the ball park. Hardest maple (Acer saccharum), in best conditions, has an elasticity modulus around 12.6 Gpa, and such carbon rods should be about 180 Gpa. Though it appears to me (and many others) that the best reinforcement known is a full beam of carbon like the ones Vigier uses. It's so flex resistant that Vigier's guitars don't need any truss rod at all.

@chocolatecookie8571 2 года назад

You’re such a cool guy, haha 😆😊👍

@maximumguitarworks 2 года назад

Cool? More nerdy!!

@chocolatecookie8571 2 года назад

@@maximumguitarworks A funny nerdy cool guy 😂

@plexibreath 3 года назад

Great episode, I learned a lot. I'd go so far as to say the groovy factor of this video was greater than that of a corrugated tin roof. I went to the Dragon Plate site and looked for the hollow carbon fiber rod, is it the one under the "Square Pultrated Tubes" menu? Have you done any tone shootouts of necks with and without carbon fiber reinforcement?

@maximumguitarworks 3 года назад

That is the correct tube John. Thanks for your groovy endorsement. Honestly, I can't tell the difference in tone...I'm sure someone can. However...I'm sold on the added strength.

@fat-hand 3 года назад

@@maximumguitarworks I went to find the CF tube based on your reply above - thanks, as I had same question. Sadly, though DragonPlate is in New York, the estimated shipping to Georgia was $43 Ground on a $33 ($30 minimum required) order of CF tube. What was yuour experience? And thanks for this excellent video! You answered questions I didn't know I had :)

@fat-hand 3 года назад

@Maximum Guitar Works I too would love to see you make a neck testing video, but to see how various reinforcement materials affect the tensil strength of the resulting neck with various woods - same jig could be re-used too! As a new builder, I have a lot of questions about when to decide to use reinforcements (as a logcal QA measure) based on wood type and grain direction - ie, "If you are using African Mahogany vs Honduran vs Maple vs Wenge, with the grain running in direction, you should use reinforcement..." etc. Perhaps one should test tensil strength of the neck wood before/after the truss rod channel is cut and without truss rod and fingerboard? I'd like to know if the neck flexes distance under weight of pounds (sans trussrod channel), one should use reinforcement. Maybe such "insanity" could make poplar an expanded choice? You rock regardless!

@maximumguitarworks 3 года назад

Yeah...I order in bulk, so shipping is not as much per piece...but I have noticed that they overprice their shipping in my opinion. But things like this make me look at other options...and I have two for you. Kite and RC builder often use carbon fiber of various sizes. I have found a 6mm solution for you. You just need to purchase a 6mm spiral bit for your routing and it will be of similar strength as the 1/4" I have been using. There is a solid version and a square tube version...both on Amazon for much better pricing and free shipping option. www.amazon.com/cncarbonfiber-Square-6x6x5x420mm-Available-Pultruded/dp/B08SVKM3SM/ref=sr_1_3?dchild=1&keywords=Carbon+Fiber+square+tubes&qid=1626869336&s=industrial&sr=1-3 www.amazon.com/gp/product/B09417J2Q5/ref=ox_sc_act_title_2?smid=A3IW91RO6GTANJ&psc=1

@fat-hand 3 года назад

@@maximumguitarworks Thanks! I saw that @ 420mm (~16.5") but went with another source I found on Amazon for the hollow tube @ 1000mm (~ 39.4") to get 2 rods that equal the StewMac length of 18" assuming that was the suggested length, since I didn't know how long they should be. Like DragonPlate, the more one buys the cheaper it gets. They also have quantities of (4) and (10) 1000mm tube/rods that make it even cheaper but I got enough to make 2 necks to try out it out. (2) 1000mm rods will = ~ $7/neck.

@SarcastSempervirens 2 года назад

Hmmm, one question - how far can you go, installing CF rods (two in this case) until the rods make the neck so stiff you can't add some little relief without having to tighten the truss rod so hard that it either rips off the fretboard or rips through it? Could it happen at all?

@maximumguitarworks 2 года назад

I've never seen that happen. I can't recall the math in my head...but if you calculate the amount of force needed for the minimal amount of relief needed (I'm normally at near zero relief)...the string tension alone is normally sufficient. I'm normally at near neutral on my truss rod setting...so not much force being applied. If you need a lot of truss rod to flatten a neck...it is probably a bad neck.

@tsiggy 7 месяцев назад

Pounds measure force. Pressure is force per area.

@kostagiann100 Год назад

How about graphite?

@zAvAvAz 3 года назад

thank u for this most excellent video full of the pudding. i love you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! he reminds me of luke skywalker.

@maximumguitarworks 3 года назад

Thank you Dennis...although the "I love you" makes my wife jealous. ;-)

@zAvAvAz 3 года назад

@@maximumguitarworks ha ha, tell her i only love my neighbor as myself.

@TheBinaryWolf 2 года назад

Seems to me that any strip that returns to pre-flexed state would be useless in a guitar neck, since string tension is constant. Two 1/8" x 3/8" carbon fiber strips might contribute to resistance and not add significant weight to the neck. A 1/4 square rod would be geometrically weaker. No?

@maximumguitarworks 2 года назад

It is all overkill most of the time. So, preference and economics plays a role too.

@trus3683 2 года назад

Having trouble finding square stock on Dragonplate. Can you link to what you use?

@maximumguitarworks 2 года назад

dragonplate.com/Square-Pultruded-Tubes

@lcguitars2393 3 года назад

One question? Why is it harder to route a .20" channel compared to a .25"? They seem to route the same to me provided you have the right bit.

@maximumguitarworks 3 года назад

I only say that because a 1/8” router bit requires more patience and care when routing. I find a 1/4” bit to be more forgiving.

@lcguitars2393 3 года назад

@@maximumguitarworks Fair point, I go about 3 passes regardless if its 1/8,.20 or 1/4.

@alexjoseph9973 2 года назад

is the carbon fibre that you talk about graphite? thanks!

@maximumguitarworks 2 года назад

It is a protruded carbon fiber...which I believe is different than pure graphite. But I am not a real scientist ...so this might be a better question for someone smarter than me. However, form a sales point of view...they classify these into the carbon fiber group. There are fibers in them...but not carbon fiber cloth like sheets use.

@chukka62 3 месяца назад

very interesting but the scale you are using came from aliexpress and is false i have 2 of them and they dtgive the same reading.

@MarkRawling 3 года назад

Super interesting, tx! Best video indeed. So um, any chance you could create a contraption to compare the sounds? Maybe those tubes sound great, or maybe they sound bad, better find out if you're gonna use them...

@maximumguitarworks 3 года назад

Anything is possible.

@leoarjuncrasto 3 года назад

hey steve..! Can I put a Carbon reinforcement on my Strat neck by removing the fingerboard because my neck moves a lot and is literally unplayable even after multiple setups within a few days.

@maximumguitarworks 3 года назад

Yes you can. However, removing a fingerboard is not as easy as some make it look. There are unknown as to what glue was used...which dictates the method of removal. Any glue that comes loose with steam (moisture and hear) has a chance to damage the straightness of the board. Also, it the neck is moving that much...it seems to me that something else is wrong too. Truss rod slipping, other portion of the setup not right. Could be many things. I would consider everything before attempting to remove the fingerboard.

@leoarjuncrasto 3 года назад

@@maximumguitarworks Thank you so much. I will surely look into all these other aspects you pointed out.😁 The moment I got the guitar setup, within 2 days it started buzzing, I started getting fret buzz on the lower frets and then the action gets abnormally high on the higher frets, I can also see a slight twist on the neck. In short its just frustrating me. I feel the company has been putting out necks which are not completely dried out I guess. Thanks again Steve. Your response means a lot.

@ANCAPVoluntaryist 3 года назад

@@leoarjuncrasto I have similar problem with my Indonesian Ibanez RG. Removed the finger board with big wide flat salad knife without heating or any other preparation. Started from the nut with gentle hammering and a lot of pushing. It went cleaner than expected.

@leoarjuncrasto 3 года назад

@@ANCAPVoluntaryist how does it play after the reinforcement?

@ANCAPVoluntaryist 3 года назад

@@leoarjuncrasto I did it just to replace the maple fingerboard with ebony. At that time I had no idea I can use this opportunity to install extra rods to improve the neck stability. You can hear it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dXK65mbvb9M.html

@BobStCyr 2 года назад

you mean torrified wood is more resistant, not resilient, right?

@ryno6101 2 года назад

Great video, but safety warning acetone will absorb thru your skin into you bloodstream. Otherwise are you going to sell carbon fiber rods?

@maximumguitarworks 2 года назад

Thanks for your comment. Sorry for the late reply. I don't plan to sell things that can be easily sourced elsewhere. Dragon Plate...or Amazon seem to provide good options.

@cdnpunk2270 3 года назад

Kts titanium vs carbon fiber? What is better?

@maximumguitarworks 3 года назад

It is subjective. From my test...strength to weight goes to the carbon fiber. And all I use is carbon fiber now...if that means anything.

@PaulMcEvoyGuitars 3 года назад

Killer video, very helpful thanks! Do you have a link for the Dragonplate tubes you are using? Is this it? dragonplate.com/dragonplate-carbon-square-tube-250-x-250-180-id-x-48 I've been thinking about building some super lightweight guitars. I was wondering about using softwoods for necks with carbon fiber rods and a truss rod. Pondering Sitka Spruce. I made two necks out of Port Orford cedar on classicals and they came out awesome. But it's rare and expensive. And I'm not sure how it would do with steel strings. Do you have any thoughts on that? I'm not sure that Sitka would be significantly less stiff than Mahogany which seems like you could do an electric neck with. Actually, checking here, it looks like Sitka is comparable to Maple and Mahogany in stiffness and strength. I was also thinking about Alaskan Yellow Cedar but the other cedars here look noticeably less stiff. Any thoughts? workshopcompanion.com/KnowHow/Design/Nature_of_Wood/3_Wood_Strength/3_Wood_Strength.htm

@maximumguitarworks 3 года назад

Hey Paul...that is the correct Dragon Plate link. I have also used Port Orford cedar to build classical guitars...and Spanish Cedar. All I can say is that you would have to try it and see how it hold up over time...under string tension. I believe that the likelihood of success would be great in a set neck guitar than a bolt-on neck. Carbon will help...but I'm not sure how will it would work. Parker used basswood...but with a set neck and carbon fiber exoskeleton. Sometimes there are innovative ways of doing things that haven't been tried...other times it has been tried and didn't work which could be way you don't see others doing it. Another thought with a light neck...is you need a matching light body...or the guitar will not balance well. Good luck, Steve

@PaulMcEvoyGuitars 3 года назад

@@maximumguitarworks thanks Steve. I was thinking of a chambered pine body. Hard to get much lighter than that I think. I appreciate your thoughts. Very helpful. Thanks a million.

@karelenhenkie666 3 года назад

@@PaulMcEvoyGuitars I've built a long scale steel string guitar with Oregon pine (Douglas pine) and it hasn't moved at all in 2 years.

@irakopilow9223 3 года назад

Cool episode, Steve. However, it was a chewing gum wrapper and 6-inch length of bailing wire short of a true MacGyver shoot. See you on the other side of Covid-19!

@maximumguitarworks 3 года назад

That's the next episode Ira. ;-)

@riproaring3140 Год назад

"This is impressive."

@grantstewart5453 Год назад

They make their money back on outrageous shipping costs. I was going to buy them till I got to the gouging shipping costs. Even the quote I got from them was high. Said screw it, didn't order them.

@ourclarioncall 2 года назад

IF there was no truss rod or reinforcements in a flat saw neck …. How much relief would string tension alone create ? I guess string gauge is going to effect the answer to that question. Let’s us a set of 10’s And then say we change the wood to quarter sawn ? Keeping the string Gauge the same

@maximumguitarworks 2 года назад

No idea...probably too much. Quartersawn would be less...but I have never tested. I do know based up guitars I have worked on is that a pretty good amount of the truss rod is needed when going from 10's to 9's.

@ashscott6068 2 года назад

"Won't mention any names..." It's okay. We all know. Same place you can buy a "guitar hammer" from. Same as a normal hammer, but the packaging has a picture of a guitar on it, and it costs 3X as much.

@idiotburns Год назад

never tested steel

@chillpillology 3 года назад

Very cool. But how do you know it works?

@maximumguitarworks 3 года назад

Not sure I understand which part of "it" you are referring to. Anything besides the maple will stiffen the neck...so if that is your goal...then they work.

@chillpillology 3 года назад

@@maximumguitarworks i just hadn’t seen any comparison or experiments anywhere to see if these actually keep a neck from twisting.

@maximumguitarworks 3 года назад

OK...I understand what you are asking now. Let me first say...I believe if you are looking for reinforcement to prevent twisting...your are off track. Twisting is often the result of bad wood...not stable enough. First priority is to select the best wood you can. The goal is a good stiff neck that is not as susceptible to changing due to weather changes. This is why quarter sawn wood is better than flat sawn. However, many flat sawn are very beautiful. Everything is a trade off. Adding rigidity will make any neck better...which is where neck reinforcement comes into play. Do all necks need it? certainly not. Can all neck benefit from it. Yes...because there is no down side other than extra time and money to build. A truss rod is not really designed to keep wood from moving...it is to fix the bow in the neck that is too much or not enough (in the cause of dual action truss rods). The less the truss rod has to fix...because the wood is more stable...the better the neck. Less stable necks require more tweaking with changes of temperature and humidity. More stabile necks require very little adjustments after initial setup. Hopefully this clears up your question. Bottom line...more rigid necks are better.

@chillpillology 3 года назад

@@maximumguitarworks great thorough explanation thanks!!