BEST Home Car Lift 6600LBS! - TWIN BUSCH TW S3-10E Review!

Подписаться 12 тыс.

Просмотров 180 тыс.

50% 1

BUY YOUR LIFT TODAY Use this eBay link bit.ly/BESTCARLIFT
*Well, you all wanted to know.... So here is a video on my
Twin Busch TW S3-10E Scissor Lift
I can't earn commission from Twin Busch and they won't let me sell the lifts which is unfortunate as I really want to as they are GREAT.
Here is a link to purchase one!
BUY YOUR LIFT TODAY Use this eBay link bit.ly/BESTCARLIFT
Support our Channels below and Gain Extreme Entries. Good Luck!
Gas Tachs Merch here!
bit.ly/GTMerchNew
#TwinBusch #Homelift #Carlift
Full Giveaway Terms Here: gastachs.com/pages/giveaway-i...
How to Enter!
1 - Subscribe to Gas Tachs Garage
2 - Leave a comment on any video posted between Nov 1st 2021 and Jan 31st 2022. 1 comment = 1 FREE entry. 1 comment per video.
3 - Purchase any Merch on www.GasTachs.com $1 spent = 3 Entries!
Good Luck!
Whats included in the giveaway!
1 - Sonic S9, 8 drawer Tool Box
1 - Bit Socket Set 1/4" 3/8" 1/2", 139-PCS - MEDIUM
1 - Pliers, Chisel, & Hammer Set, 17-PCS - MEDIUM
1 - Screwdrivers, Wrench Set, 29-PCS - MEDIUM
Delivery to address in Contiguous United States of America
Here is everything I used to make these video for you guys:
Main Camera's Lumix G85
amzn.gastachs.com/amzn/JieU
Mic Comica CVM-WM100
amzn.gastachs.com/amzn/EVLV
Osmo Pocket Camera
amzn.gastachs.com/amzn/z7oT
Garin VIRB 360 Camera
amzn.gastachs.com/amzn/PhJk
3-Cup Action Camera Mount
amzn.gastachs.com/amzn/bE7I
Garmin VIRB® Rechargeable Battery
amzn.gastachs.com/amzn/dzKg
Delkin Fat Gecko 3-Arm Suction Mount
amzn.gastachs.com/amzn/S5db
If you're interested in following me on other platforms please check out the links below.
Check out the latest and greatest deals on Tools, Cabinets, and Everything for your Garage:
linktr.ee/GasTachs
My Personal Account
gt.gastachs.com/ThisIsWJBell

Авто/Мото

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 187

@GasTachs Год назад

*BUY YOUR LIFT TODAY* Use this link bit.ly/BESTCARLIFT

@GrumblyAirMonk Год назад

I was thinking between 5-6K.. its actually 2400 new... not bad - All i need is the car so i can get the lift

@morganpowell2999 Год назад

I like this scissor lift design better than others. You can actually get under it for exhaust work, or transmission drops, etc.

@stevenviens4901 Год назад

That lift is awesome for what I would need at my house a short ceiling in my garage also and it's portable great for changing oil on the vehicles doing brake jobs working under the car. Perfect.

@jefftaylor2706 6 месяцев назад

This is exactly what I was looking for. Nice work on video

@kingkobina 2 года назад

Great lift. Looks super simple 👍👍👍

@johngrant1337 2 года назад

The best part about the lift is it come in Blue.I did not know about the moving kit. Now it is a tool that I need as I can use it out doors and store it inside Thanks

@GasTachs 2 года назад

When I first got the lift I didnt get the tool and move this lift was a pain. The tool makes it perfect!

@Ruminator66 2 года назад

Like this unique lift, the mobility and plug in option 👍

@GasTachs 2 года назад

Yes indeed!

@zechariahsalisbury6029 Год назад

Looks pretty good. I was kinda surprised how fast it seems.

@gerhardschmitt5712 3 месяца назад

Wow just being able to plug it in is a huge bonus, Great Lift!

@johnsparks2669 2 года назад

Great Video, thanks for sharing. Was looking for something functional as an alternate to the old school column style lift. I will be considering this as a solution.

@GasTachs 2 года назад

Glad it was helpful!

@motor_citymuscle288 Месяц назад

Great video! Thanks for sharing

@stingk5295 2 года назад

Great Show Dude!

@RayNLA 2 года назад

Been a while! Glad you are doing well

@GasTachs 2 года назад

Thanks for stopping by!

@LSMykie 2 года назад

I definitely need those lifts!!

@audiorat1 2 года назад

I got one. It's great. I made a lot of new friends too. :)

@islandtime1402 Год назад

Great video! This might be exactly what I'm looking for because I have a variety of vehicles: Expedition, Miata, BMW and I really disliked the idea of going with a two-post lift in my home garage. Unlike some of the other lifts, this lift looks like it can get my Expedition up high enough to work on it. I'm going to check out your other videos to see if you have it in action with the Expy.

@jerseyjim9092 Год назад

I like that you can access the center undercarriage area unlike the one piece scissor lift. Seems like residential delivery would be a hassle for me without a lift gate truck or a forklift. I'll have to look into delivery to a local terminal where they could load it to my trailer.

@GasTachs Год назад

Glad this video helped!

@BjWraps Год назад

Great lift I have the same set up but I removed the swisstrax from under it because it would slide around on the tracks

@usmc12710 9 месяцев назад

Loved the video. Look forward to the next one.

@GasTachs 9 месяцев назад

Thanks !

@MegaGemann 2 года назад

Now I wanna get one!!! Thanks for the demo bro!!!

@GasTachs 2 года назад

Thanks for the kick in the ass!

@MegaGemann 2 года назад

@@GasTachs it was a great great video!

@SanDiego_VDubLife Год назад

Wow. Pretty sweet

@ThisThatLittleFarm 2 года назад

Great VID. Thanks buddy!

@GasTachs 2 года назад

Thanks, and thanks for stopping by!

@peoplewatchers Год назад

Looks just like what I might need for my garage.

@GasTachs Год назад

👌🏻

@taranisx 2 года назад

I wish would love to have one in my garage

@CrazyWillie01 3 месяца назад

Great vid

@muhammadkhaleed4894 6 месяцев назад

Thank you!!!

@billfuel6916 5 месяцев назад

I LIKE WHAT YOU ARE DOING I NEED ONE LIKE THIS

@amx19733 7 месяцев назад

Cool lift!!!!

@jayroc1502 8 месяцев назад

I like how he says garage.

@trizguru7916 2 года назад

Something I've been wanting to add to my garage. I like those ramps.

@GasTachs 2 года назад

A must have if you work in cars

@wildestcowboy2668 Год назад

@@GasTachshow much it cost boss?

@ok4377 7 месяцев назад

Thank you for the great review! Regarding the Twin Bush TW S3-10E vs the Quick Jack 7000 TL....I feel the Twin Bush appears more beefy. However, there is one thing I am struggling with when it comes to the Twin Bush. While you can certainly move it around, what are you going to do if you need to get it out of the way? Gas Tachs garage is pretty bi, so you can move it to another bay. If you do not have that luxury, or are using the second bay, where are you going to put this one? It looks like both ramps are connected. Not to advertise Quick Jack here as I have no affiliation (just looking for an inexpensive and sturdy solution myself), but the QJ is about $1k cheaper- nothing to sneeze at for me....

@elray2446 Год назад

Awesome

@052188joseph 2 года назад

I love that lift!

@GasTachs 2 года назад

Me too!

@lazaronieto85 2 года назад

Thank you for the link

@GasTachs 2 года назад

You're welcome!

@drlx03 2 года назад

Plan to get one of those one day. No brainer for lower ceilings

@GasTachs 2 года назад

Agree!

@ralphnavarro4370 2 года назад

One day I’ll get a set.

@hantin2434 2 года назад

I like it.

@hugosanchez8319 Год назад

Wow nice I'm look into get that type of fast lift for my home 👍👍

@GasTachs Год назад

👌🏻

@928pcar 2 года назад

Ordering my S3-10e when they next become available. Hopefully in 4 weeks I’m told

@GasTachs 2 года назад

Nice! Congrats and enjoy!

@monica93304 6 месяцев назад

That lift would be perfect for my Audi B5S4 and Vw Beetle

@kennethgeelhaar872 4 месяца назад

Hi Warrick, Many thanks for making this video. I just want to let you know that I purchased this lift from the link that you provided on EBAY. The first thing different is that mine doesn't say Twin Busch on it. It is just like yours, the same color, but it says XinKong on the control tower. I am impressed by how easy it is to move in my garage and with the structure quality. I have one question though. Mine came with a 110V cord already attached to the tower. When I plug it in to a standard 110V outlet nothing happens when I push the buttons. When I read the writing on the lift pump it says 220V. So I emailed the seller auto-repair-equipment and told them. They responded "This model is for 220 volt if manufacture put a 110 volt pulg on this unit plz use a 220 volt plug adapter will fix the issue." My question to you sir is do you use a 220V to 110V adapter on yours? If you do use an adapter, please respond with a link for the proper adapter so I do not ruin this brand new unit by doing something wrong. Thank you

@RotaxXS 2 года назад

Can you easily remove the ramps? I need to lift a MIata and I would need to remove 1 side after the car is in place.

@davewhanger6722 2 года назад

Nice and mobile!

@allanjones6254 8 месяцев назад

I like the. Lift

@TheAirun17 2 года назад

New Sub here, was looking for reviews on this lift and found your channel. Have you used this lift to pull a transmission? Is the space between the runners sufficient to comfortably work in that area?

@GasTachs 2 года назад

Havent done any transmission work, but should be enough space

@sweettony9359 Год назад

Thanks for the info. I am looking to get a lift for my small garage and this may fit the bill.

@wildestcowboy2668 Год назад

How much does it cost

@stellijer Год назад

I was going to dismiss this until you put a corvette on it. A couple questions though: 1) Doesn't the bar keep from using a creeper or mobile chair? It's not high enough to stand under. 2) Just how high does it go up? 3) It looked like the front tire was hitting the lift on the vette? Or very close? 4) Seems a bit expensive - I'm seeing prices nearly $3000 4) How would you store this if you don't have room in your garage floor to the side?

@streets8755 2 года назад

I need a lift...and tools!

@calvinmathews9277 Год назад

Thanks

@GasTachs Год назад

No problem

@na337 8 месяцев назад

the e bay one is not from twin bush. twin bush web site shows being discontinue. i really want the full but when i e mailed and ask they say supply shortage and in a year will be up to date. that was last year so dont know if they stopped selling it the u.s. seems like you can get it in uk though sighhh.

@jester-lester 24 дня назад

Thanks for the video. The only thing I'm not keen on are the 2 bars that could restrict access underneath the car, I fear that you could stumble over them when crawling around under the car

@GasTachs 22 дня назад

You are correct, that are a bee itch

@beurownboss1554 6 месяцев назад

Hi friend, question for you. Have you found any vehicles that were not able to work due to the drive over platforms being the jack points? Reason I ask is because I have a big range of vehicles by size (tiny bmw z4, c6 corvette, several hummers, and a humvee). My concern is that I will find a limitation with where the platforms don't reach the jacking points on the vehicles. I am debating between this lift and a similar midrise that uses adjustable arms to pivot around to the lift points of the vehicles but Ive love to hear if you came across any vehicles personally that didn't work. My widest vehicle (humvee) is 84" wide. From what I see online, these tracks around about 75" wide so driving over them with the humvee may be difficult. Cheers!

@Epiphoneman331 2 года назад

I might need to get one

@GasTachs 2 года назад

Makes my lift easier, I would recommend!

@kegsemptygarage6788 2 года назад

Thx for the video. Very helpful. I bought one and it finally arrived. Question. What size breaker you running? My 20 amp popped. Thx again

@GasTachs 2 года назад

Yes i'm on a 20! Enjoy!

@kegsemptygarage6788 2 года назад

@@GasTachs thx!

@huongyn8808 9 месяцев назад

@@GasTachs That means I have to have separate 20 amp breaker for it? thanks

@grantr5417 9 месяцев назад

@@huongyn8808just means whatever else is on the same circuit needs to be off when running it

@kdao1007 2 года назад

Great video. Where is the link to buy those ramps as well?

@GasTachs 2 года назад

Bit late but here you go www.raceramps.com/?gclid=Cj0KCQjwnNyUBhCZARIsAI9AYlEnR_unQxggK7eLC5iKiqfo0RfSb0-VwqjyK-kKHoQcZxvmHx0oSYoaAhToEALw_wcB

@Hasinsamuray 6 месяцев назад

Some engineers telling that, scissor lifts are unsafe, they prefer columns, traditional ones. How do you doing so far?

@tonytigere5684 Год назад

Great video. This lift looks better and sturdier then the quick jack 7000 tl I've been looking into. Quick jack looks weak to me. What are your thoughts on the quick jack and what is the price of your unit?

@MoparGuy1625 10 месяцев назад

I have a QJ for about two yrs now. It’s a legit lift but much rather have the twin Busch one now.

@burleigh604 9 месяцев назад

Do you think getting 2 of these lifts it can lift my 5 ton motorhome?

@teenice894 2 месяца назад

Curious if i could put one in my driveway 🤔

@lordgarth1 2 года назад

I need to make a decision on some kind of lift. This one is approaching the cost of post lifts tho.

@GasTachs 2 года назад

Yes since I got mine the price has gone up, but keep in mind this is a smaller company and the prices increase faster so the post lifts will also go up in price soon

@stellijer Год назад

@@GasTachs Post lifts are already prohibitively expensive. The MaxJax is nearly $4000

@crisantojr.robles4357 Год назад

Hey Bro...do you have a video lifting Truck like Silverado. I want to see how you position them. I am thinking of buying this for my truck. thanks!

@GasTachs Год назад

Best I can do ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Dz3L6jmyf7c.html

@dubvr6nos 2 года назад

I know this is an older video, but I was curious if you had any issues with the lift on the Swisstrax?

@GasTachs 2 года назад

nope, no issues at all

@HabitualButtonPusher Год назад

I watched the assembly vid the company produced. Did you really have to wire the electrical yourself when you received it?

@GasTachs Год назад

Just simple plugs

@maveric0738 2 года назад

I need one of these. However I have a single car garage.

@GasTachs 2 года назад

I do drove on and off of it every time I take the corvette out. It's pretty easy once you get used to it.

@audiorat1 2 месяца назад

Twin bush is no longer in US. I contacted them about leaking hose connection. Ended up emailing the headquarter.

@user-lh7fc2ze9h 8 месяцев назад

How expensive is the twin bush car lift system?

@hhazelhoff1363 Год назад

Better of with a two post lift if your not going to move it. Gives you way more access, and you can remove the tires

@GasTachs Год назад

I remove the tires with this lift all the time…

@hhazelhoff1363 Год назад

@@GasTachs can you remove all four tires at once, or do you have to front and back separately

@GasTachs Год назад

@@hhazelhoff1363 all 4, done it With my R8, Corvette, Expedition, Jeep Gladiator… the list goes on…

@89Trashmaster 2 года назад

Did you bolt your lift to the ground? Cause it's on those slippery swisstrax's.

@razvanturcu9871 Год назад

I don't believe he bolted it to the floor, since he said that he is moving it outside when he needs more clearance.

@Ron_Masterjohn 6 месяцев назад

Can a big guy like this guy get in between the ramps to work on drivelines or exhaust?

@GasTachs 6 месяцев назад

I mean I have video of me doing it so yup.

@obsesseddetailingsolutions 2 года назад

So does this require a 15 or 20amp receptacle? My friend brought one brand new a while and has never got it working. It seemed as it didn’t have enough power. Any ideas.

@GasTachs 2 года назад

Mine works on a 20, if he never got it working maybe there is a loose wire in the control box

@googleuser1006 Год назад

my ex is a total receptacle

@johnwalters878 9 месяцев назад

I have the S-19 and I never got mine working either. It won’t work with 30 amps. It won’t reliably lift the platform itself . It’s the most expensive raised desk I have ever owned. All they do is blame the power and offer no real help. Even if you do get these lifts working, you shouldn’t trust it to be able to get it down if it gets stuck on the locks. Maybe these work in Europe, but not in the US. I can’t even get them to sell me a new motor. So in my opinion, if you can’t get parts from this company, it’s worthless even if it’s built well.

@davem5333 9 месяцев назад

@@johnwalters878If you go to the website it says these are 220 volt. It won't work on a 110 volt American electric grid.

@johnwalters878 9 месяцев назад

The lifts sold in the US run on 110v power.

@KingTrumpTheGod Год назад

I want to work on the transmission of a ‘93 Dodge Dakota. Will there be space between the lifters to get at the transmission to take it out? It looks pretty small space between the lifters.

@GasTachs Год назад

It’s possible but won’t be fun

@jackzon8404 2 года назад

commenting for the giveaway 😃

@GasTachs 2 года назад

you could have tried harder....

@klaas-janbrink4366 3 месяца назад

You have the lift placed the wrong way. according the manual you have to turn it 180 degrees.

@JoeCnNd Год назад

wish it was about 48 inches

@JorgeRodriguez-gc1or Год назад

Im about to order the same lift for a c6 z06 also, any problem with it? Any recommendations?

@wildestcowboy2668 Год назад

Get a hellcat

@JorgeRodriguez-gc1or Год назад

😂😂😂

@jodygrady9733 11 месяцев назад

The link brings you to a lift that is 240 volt and needs a compressor.

@CJP1012 2 года назад

How easy or hard is it to get underneath the car to change the oil, etc.?

@GasTachs 2 года назад

It't not the easiest but BUT better than doing it on the ground

@kindercarcaredetailing4768 2 года назад

I've had mine for about 2 years and was told my Twin Busch not to lift trucks because they aren't balanced and of course the bulk of the weight is towards the front and could damage the lift. Ha e you had any troubles lifti g your trucks?

@GasTachs 2 года назад

The biggest issue I have had is if the weight is not centered left to right the lift does not like that. Other than that all good

@victorp5491 Год назад

Any chance I could use only one side of the lift via complete separation of 1/2 of the lift for a Motorcycle??

@GasTachs Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j1tk3fiYPOc.html

@PMPerformance 4 месяца назад

So being a bigger guy, how uncofrtable is it getting to the middle of the car to do a midpipe, or whatever else one would need to do in the center without being able to roll a chair under? Is your Z lowered?

@GasTachs 4 месяца назад

Look it ain’t fun… but I’ve done everything I’ve needed to with this lift

@PMPerformance 4 месяца назад

@@GasTachs thanks for the response. I think I am leaning to a 4 post now, but it’s gonna be tight!

@GasTachs 4 месяца назад

@@PMPerformance have you seen those 1 post movable lifts? I was going to try those next

@PMPerformance 4 месяца назад

@@GasTachs yea, I’m a little skeptical though and losing mid section access. Concrete thickness will probably be more an issue with that

@pmaint1 9 месяцев назад

Seems like a decent lift for oil changes but you aren't changing tires rotations or doing brake jobs. Still looking for the perfect lift. Good luck I know!! LOL

@GasTachs 9 месяцев назад

I do all of that and it isn’t an issue. Put lifts on 2 trucks with the lift too…

@kenwendorf8913 Год назад

Your link to purchase one sends u to another company not the one u are showing ?

@GasTachs Год назад

The link used to have that lift, it looks like the company doesn’t sell that lift anymore

@audiorat1 Год назад

Are you able to lift a Tesla Model Y? It wouldn't go up for me. Can you try it?

@GasTachs Год назад

unfortunately i dont have a Model Y handy..

@audiorat1 Год назад

@@GasTachs I called them. They said due to the nature of the scissor lift, there has to be higher "pre-lift" in order to lift heavier vehicle such as Model Y. The vehicle is lower than normal vehicle which add to the problem. The solution is to add more platform for it to drive on so the lift has more leverage and better angle for the hydraulic system to extend. I think it's kinda like you need to extend the radius to apply more torque.

@jonathanalvarado3188 10 месяцев назад

@ralphwhite3621 Год назад

What is the flooring in your garage?

@GasTachs Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KBnd7emraSI.html

@MasterTechLou 2 года назад

We have this same lift, I dont like that you have to add wood or ramps to use the lift,. or modify the concrete or flooring. and its too long it hits almost all the tires of each car, so its not very easy to use, cant just drive a car up, set blocks and lift. Useful but a pain at times.

@GasTachs 2 года назад

I think any type of "on ground" floor will have these problems. the best solution would be to out one in ground.

@MasterTechLou 2 года назад

@@GasTachs you are right, sucks to have to buy something and then make it work for you. Appreciate the video. 😊