Best Red Dot Zero | EDC | Best | Navy SEAL | 2022 

Im a LEO in Texas and l started carrying a red dot on my Glock 17 gen5 two years ago, first session l spent 200 rounds playing with different Zeros, l found 25yard is best one for me, at 25 yards l can stacked rounds on top of each other on a 3 inch DEA DOTS. I work nights so red dot is great, l carry a set of Ameriglo all black suppressor sights and a TLR 1000 lumens for my weapon lights, backup gun is a Glock 26 with a light and laser combo from Streamlight Zeroed at 25 yards, I practice regularly since l'm one of the firearms instructors for the department once a week 50 rounds l start with accuracy first from the holster no time limit then l move to speed and multiple targets, run and doing push ups in between reps, good video man.

A big thanks for taking the time to go through this design of experiments. I suspected as much that it would not make much of a difference. After watching a video from the Modem Samurai Project, he recommended 10 yams for one simple reason. When sighting the pistol you can actually see where you are hitting without having to retrieve the target. Most importantly you can practice at that distance to make sure your grip, trigger control and form are hitting the target within a one inch spread.

Great infovid. The showing and then the telling analysis of the targets really shows the real world impact. Thanks!

Awesome series. You are my go-to reference. I’m new to shooting- your vids give me the confidence to take it to the range knowing that with practice I will develop proper technique and acumen.

25 yard zero is best within 0-50 yards there is about 2.5-3 inch deviation. Meaning you can take the shot without having to think about your zero distance if you had to push a shot out to 50 yards. In a world of active shooters, if you can take distance with cover and have the shot with safe back stop, put the dot on them and send it.

Thank you for taking the time and effort to make this video. I consider my self a new shooter, and use iron sights on my home defense firearm and a new red dot on the other. Your zeroing in formation will be a tremendous help as I practice with the red dot. I am now a subscriber!

Just picked up a VP9 and getting a Holosun SCS for it to fit the optics cut and cowitness. Can't wait until it comes in, thanks for the work you put into your videos. It's really good knowledge and I'm glad you're making it available to those that need it, subscribed :)

Just, excellent teaching and commentaries, Thank you !!

LOVED the vid. Thanks for sharing!

Awesome video. Decided to go with co witness myself due to what you stated it’s what we are/were used to. Got to think practicality with defensive shooting. Subbed 👍🏻

Great work!!!! I'm just getting into IDPA shooting. This vid gives me the confidence that out to at least 25 yards, regardless of which zero I use and barring my usual fundamental inaccuracies, I can get A zone hits as long as I have good target focus. Thanks again for the great work and your service.

This was outstanding data regarding the use of a red dot from 10 to 25 yards, still lands you in the A zone. I agree with you 100% Thanks Brotha!!!

These videos are great. Thanks for doing them

I’m about to switch over to a red dot for my duty pistol. This mini series has helped tremendously! Thank you!

Great information as usual ! Thank You for your service !

I find regardless of what zero you use, it’s best to fine-tune it at a longer range as you might not notice an error at closer distances. For a 10 yard zero, you should hit approximately 1/2 inches low at 50 yards, 1/2 high at 25 (irons/co-witness), and zero’d at 50 and .66” high at 25 for a dot. You should verify with a Ballistic Calculator, my numbers are based on .66” sight height (irons), and .8” sight height (dot). That said, I use a 10 yard zero as it provides my bullet will not be higher or lower than my site height relative to the center of the bore from point blank to 50 yards.

Thanks for the info, can’t wait to get to the range to zero my trijicon. Will definitely take your advice into account. You have a new sub

Probably the best and most informative review I've seen on 10,15,25 zero.Very direct with visual examples from each distance. I choose to use a 15 yard zero. KickAss review 💯🍻

This is an awesome video! Thank you!

Thank you for your service

This was a wake up for me many thanks.

I love this video and send these to my friends who questioning different zero distances

Excellent video and VERY informative! I’m new to the RDS and this helps me make a well informed decision. As an instructor (and dinosaur). I am still a hardcore iron sight guy - nut I’m warming up to the RDS

Great video. The timing is perfect. In a few days I will be at the range to zero my pistol red dot. It looks like the 25-yard zero is what I want to do. Thank you!

As a Frogman disciple, Everyone must remember it's all about that correct "trigger manipulation" that lands you in the A zone each and every time from 10 to 25yards out. Frogman you have made me an even better shooter than I was... thank you BIG Time and please continue to post every bit of the knowledge you are able to share with us rookies 🙂! We must remain humble if we ever want to learn anything from the best out there. Stay frosty until next time !

Outstanding video Frogman, very interesting and informative video with usefil information to aide in improving your shooring with a RDS equiped pistol!! You have gained another subscriber!!! Looking forward to more of your training videos!!! Outstanding content!!! Stay Safe and Watch Your Six!!! Let Freedom Ring!!! God Bless America!!! 👋🙂🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲

Great video,answers alot of questions, thx.

Thank you for this video. I was able to get my red dot dialed in beautifully after watching this.

Really good video. Well done Jason.

Thanks for the lesson!

This is very similar to a rifle's MPBR after zeroing. Know your MPBR and put the dot/sight in an area on target that would result in an effective hit within that range box. This info is invaluable for those of us transitioning to RDS simply because father time is undefeated. Thanks again

Just what I needed. Thank you

Love the way u broke it down thank u so much for the video great information im ready to get out and find tune my holosun 507 on my Shadow Systems DR920 elite for my edc.

Thanks for the info man keep up the great vids.

I've been looking for this kind of video for a long time.

Thanks , plain n simple

Thank you for this comprehensive analysis! I don't have ready access to a 25 yard range. So my infantry-issued OCD was starting to bug me about this. For now, I'll be very content with a 10 yard zero..

Really awesome job of putting this into perspective

Thank you for the good info. I just got my first optic for my primary carry pistol, a Holosun 507c Gr ACSS reticle and am going to a indoor range Saturday to zero it in for the first time. I am planning on a 10 yard zero. This series of vids couldn't have came out at a better time for me, thank you. Of course I won't carry it until I feel totally squared away with it.

you just answered my problem. I wasnt sure at what yardage should I zero my handgun. It doesnt matter if its 10, 15, 25. Thank you very much

25 yard zero has the least amount deviation so that's the one I went with. Thanks for the video!

very good info !! thanks

Well done once again. I am just getting use to my first red dot. great information.

Excellent information. Thank you!

I've always done 25 yard zero for MRDS mounted on Pistols . I use my EDC G19 or MR920L in 2 Gun Matches because I love shooting what I carry and also use my HD carbine in these matches for the same reason . At my local 2 Gun matches we have multiple targets at 25 yards for pistol. So I figured why not just use 25 yard BZO for for my pistol. Before shooting in Comps I was using 12 yard BZO . Any zero whether its 10 , 15 or 25 yards is better than no zero at all . Awesome video bro

Thanks for the info!!!

I like all this detailed content!

Love your videos sir.

Great info for us new pistol red dot shooters!! Thanks

AWSOME JOB!!!!!!

I use a bore laser and point the pistol against the wall at 10 yards, I then sight the red dot about 1 inch above the laser dot I see on the wall (sight over bore) I then use a 6 inch steel plate rack at the club. I can hit those with easy with my Shield Plus at 25 yards. Then 115 loads can shoot a little higher and 147 a bit lower, but we are splitting hairs as is only 1 inch or soo. Good video.

It's always a fantastic video presentation. Thank you, sir.

Great analysis brother! Nice shooting as well. S/F!

Awesome video brother! Subbed

These series have been great. At 58 and a lifetime of using iron sights I am trying to transition now to a red dot because it is easier to see. It's been tough and I am doing a lot of dry fire drills at home. For some reason I notice that I have to push the front of the barrel down a fraction compared to my mechanics on the same type pistol with iron sights. I believe it is just going to take a whole lot of reps, but things are getting better each time. Look forward to more videos.

Thank again for the great series/content. I use the 10 yard zero for 9mm pistol/PCC due to the flat shooting out to 25 yards with a hold over of @ 8" at 100 yards. What ever zero anyone use especially LEO/Mil knowing your hold overs/unders is critical.

Great video. Thanks for the data.

Great video! Thanks

love the video, on zero and range. people do rewlly miss this part.

Thanx for the info man,much appreciated.I figured it wouldn’t make that much of a difference from 10-15-25 yards.I shoot mainly at 7-11 yards,and sometimes 15 yards,or more,but that is rare.

Awesome! Thanks for the video. Im hoping the Red Dot will help my tired eyes. But a little difficult to get used to.

Great video. Thanks for sharing

Well Mr Pike, you got me second guessing my 10 yard zero. Love the contend. God Bless.

thank you for this. i re-checked last weeks zero. right where it needed to be at 10. i brought it in to 7 for 1 mag, and was same point of impact. i didn't take it out past 10 for the reasons stated on the last video.....in nj you're goin to the greybar motel if you try to claim self defense out much past 10 yards......

Thank you. I’m zeroing at 25 yard’s because I’m a defensive situation in still hitting my target at 7 yards but if necessary can put on on target at 25 yards knowing my sight will guide me.

Great stuff. Agreed.

Great information Sir.

Loving this shit!!

Please keep this up!

Very surprising. Thanks

Thank you frogman for dispelling much of the myths

Just proves bare bones data is best. Most folks add fluff to inflate their ego and waste my time while still arriving at a forgone conclusion. Fascinating demo, thanks. Just subscribed.

Thanks for sharing 🤙

This confirms my theory! I am getting my scope sighted at 25 yards. Thank you for your service. 💪🔥

Appreciate information👍

Great content.

Thank You.

Close up zero (indoor range)- always figure in height over bore. Mark Barrel distance bellow the target that you’re aiming at and get them rounds in that area. Great way to get the weapon ready for long distance shooting (applicable) or at least close to. Great option if youdon’t have access to longer distance ranges for an easy quick zero

Love it

Great video very informative. I zero my pistol red dot the same as you, cowitness. For me it makes aiming using the red dot the same I do with the irons. Keeps things simple and easily repeatable. Imo.

My humble opinion matches yours, as 10 or 15 yards (more common for shooting ranges in the city) is acceptable in precision, and we continue to learn continuously with you.

Excellent video.

Well done, I use the 10yd out to 100yd mark with the G 40 10mm. I’m use to it , two inches high at 50, two low 100. Thanks

kudos to you sir. yesterday i applied your teaching technique to my range shooting and what a difference it made. i shot from the 7, 10, and 15 with all rounds impacting relatively same. and as far as the co--witness sighting? I placed the dot right above the front post and shot with ease. no dot hunting. thank you for your video. I'm a better shooter because of it. RLTW

We just got our G17 Gen 5 with Trijicon red dot. I was wondering about this very issue. Thanks!

Awesome video

Been looking for exactly this - and acquiring the dot I watched DJ and Cole from GBRS do a drill with one of Sig’s competitive shooters and was on it in a day if I followed the drill and have a 1911 grip angle haha

Great video

Would be interesting to see this with groups out to 50 yards with the 10,15,25 yard zero

Hey brother, love your videos just started watching your videos and love everything you tech and all the knowledge. What’s your edc that you carry and recommend? I’m 6’3” 330 pounds what you think is comfortable for person that big lol

Thank you.

Enjoying your content and training. Should I assume that different grains, MFG, will change, thus always stick with same…I think my mistake has been grabbing what ever is on sale and shooting that. Appreciate you and your Channel 🔫💥

Just seems to without all the shooting, which I liked, that zeroing at the longer distance will not affect the shorter distances. At the shorter distances, the bullet hasn't had a chance to deviate from its flight path. Very informative...

I feel like you should have taken five shots at each distance instead of just 2. It would give a much better idea of the dispersion and also better control for flyers / errors.

Excellent instructions. Thank you for your fundamentals and explanation on your process.

Good video👍🏻

Awesome video! Can we see one like this with the different rifle zeros?

I've heard something to the effect of zero at 10yd, then push out to 15-25 for windage confirm. Since it will get exacerbated at further distance, you'll be able to refine it more.

I always start between 7 and 10 then once I’m happy with it I move it out to 25 and zero it in, then I shoot it out to 50 and you are right it really to close to call at close distance, but even at 50 you’ll stay within 4to 5 moa