Dear Springfield Riders, check out and measure your stock Springfield shield before you do a decision, what size of freedom shield you wanna order. I measured my stock windshield and it was 15" and not 18" what Brian measured in this Video with his stock shield. So in my case, being 6" tall, 34 inseam, it's hard to decide what suits me better, 14"cor 16"? Due to the shipping costs to Germany I will order both sizes and can easily sell here the one which fits worse to me. And thanx to mention ridewithtwoindians I got also a remarkable discount from Freedom shield. They provide great customer support, I can only agree!
@@ridewithtwoindians3983 I measured from the bottom of the parabola of the windshield above the headlight to the top of the shield. 11 3/4 inches. I'm gonna assume my Indian windshield is 12 inches. I already feel like my 12 inch windshield hides too much of my vblog camera. Also while watching your video I noticed with both windshields your shirt was just blowing all over the place. That gap between the windshield and the headlight drives me crazy. I tried to fill that Gap with an Indian bag and you know what the buffeting got even worse. For me I am down to only one or two paths. On my Yamaha Stratoliner I started out with the exact same windshield that you see coming on and Indian vintage but I ended up basically with a Batwing fairing. I can honestly say the Batwing fairing cut all that buffeting out. So much like with my Yamaha Stratoliner I am now on a diligent search to add parts to my bike not provided by the factory. "Well Eric why don't you just get the chieftain?" Oh my god get off my butt already. Because I love the fact that the bike can go naked. I love quick release! That curve on the top of that windshield you got though that intrigues me.
I had the same buffeting on my Springfield and ended up adding a set of JES chrome lower wind deflectors and the buffeting was completely removed. I cut down my first factory windshield then ended up with a 14" freedom shield, loved it! But the lowers are what stopped the buffeting. Now I'm on my 2nd Springfield (deer got the first one...) and I have the OEM lower wind deflectors. They block so much air that it creates a low pressure pocket of air around the rider and the heat will not go away! Hoping to get the replacement lower deflectors from freedom shields or go back to JES this summer.
Now you have a taller windshield and with the ape hanger are the handle bars higher. Now you could go with ultimate seats, which are an inch higher and that inch was the reason you gave it back in your ultimate seat video as you had the stock handle bars and the smaller 12" freedom shield! :-)
Haha, all of those things are correct and don’t think I haven’t thought about that. However the bike is so dialed in I don’t want to mess with anything. I’ve decided that when this cover wears out I’ll have it remade by a custom seat guy like Master Lugo or Alligator Bob.
Great video and compare with the different sizes. The challenge I always had with these is if I did not get clear it impacted the ability for people to see the road clear for the video. Looks super good on the bike!
My original windscreen developed a crack early on so I worked out a deal to pay the difference for a tinted windscreen. When the new windscreen finally came in, they were able to work a deal that it cost me Free.99! So I ended up with the 14" tinted factory windshield for free. When I wear my full face helmet I don't need the visor down. Now it is time to upgrade the engine!
100%, except I’m riding a Springfield LOL! Either way, yes, it sounds glorious. As a matter of fact, a friend rode my bike yesterday and he couldn’t stop talking about how he always loved the sound but riding it...it even sounded better. There’s something about the big bore kit that just runs it into, as he put it, a fire breathing dragon. LOL. Check out our other videos and tell your friends!
Very good and informative Video.....as always :-).............I don't like the stock windshield at all, it produces a lot of buffeting to me. I am 6" tall, so I guess the 16" version should be perfect for me. BUT, as you know, I am still interested in the batwing quick release aftermarket solution with Loud Speaker and maybe built in Nespresso machine as well ? :-). The Wide Open fairing is still my favourite. Best Regards from Germany and happy new Year!
@@TwoIndians more and more thinking of ordering one. 200,- vs 1.500,- for a Stereo Batwing is a lot of money difference and the savings would bring me much closer to the 116 BBK project :-).......Is our stock windshield really that high, 18" ?
I’ve had 4 of the freedom Shields windshields on all my bikes I like the way it directs the window away from my face and a different heights of the windshield you can get through achieve it.
Nice. Thanks for sharing! That's a type of review I like. A company's product that you have used before and even had a small issue and how it was resolved. I get annoyed with reviews and you only see the product one time because it was obviously a free be and had to be sent back. Time revels great products over poor.
I do as much as I can. Have done my own exhaust etc and almost every most accessory has been done by me. Didn’t to the handlebars because I hear it’s just not worth. My time is at a premium so if it’s a
The VID has put weight on all of us. I went back on keto recently I started producing gravitational pull again. I had dropped 170, but gained some back. Nope...The windscreen makes a big difference. I wonder if Indian sells the mounts separately, like if one has the springfield dark?
Love the videos and the Springfield, I am looking at the same exact model and color. I was wondering what size the apes are and did you have to switch out any cables, if so do you remember what length? Thank you!
these 16" bars are from INdian and at the time I had the dealer install them. They came with a cabling extension kit. it was about $450 out the door. I was just short on time and couldnt get them done myself when i needed to.
Hi Rashmi, the right side bag is the Indian factory bag made for the Bobber. The one on the left is something we picked up at a bike show and just figured out a way to attach it.
@@TwoIndians roger. Thanks. just ordered a new freedom windsheild. After far too much research I found I preferred it's look and customer service history over klockwerks or memphis shades. You were actually the first one who introduced me to Freedom Shields. thanks again
I hate the scout windshield options. I keep spending money on different ones and still unsatisfied. I’ve tried the freedom shield with the scout fairing a 10 inch . Looks awesome just too short. And the 14 inch looks weird with the fairing . The 7 inch Indian fairing windshield is worthless. And all the full windshields without the fairing take away from the looks. So no matter what there’s still Unsatisfaction. Which is really depressing because I love the bike so much,, but the freedom Shields are much thicker good Quality and I love the curve the top lip Awesome for the right bike, I wish freedom shields offered half tent half clear.. that would make the 14 inch windshield look better on the scout fairing
Have you called FS and asked if the could do that half-n-half tint? I think bottom line the Scout is made for around town and it’s never going to be something that’s going to give you good protection. Heck, even the Springfield still give me wind and some buffeting but at least the bike is stable which kinda makes it feel like you’re not getting pushed around so much. I had a Scout and gave up on it, just wasn’t what I wanted long term,
@@TwoIndians : not yet , been spending money on spring, bug spray grass seed fertilizer , lots of yard work after the ugly winter.. If not ,I was thinking about getting the 14” clear and get the car head light tent. And cut the shape of the top of the windshield. And tent it lower down about 10 or 7 on the 14 clear. Too reduce focus from the windshield too a little more at the fairing. So it don’t look strange with a bigger windshield than the fairing.. the tent will give the illusion that the lower tented part is part of the fairing making the windshield look better. Hopefully 🤞
Great Video!! Hey question about the Scout, have you or your wife taken the Scout on high speeds (65-85mph) without a windshield on the highways? If so, have you consider a windshield for it? My wife's Scout has a med. size shield and still get blown away...maybe I'm spoil with the Challenger faring/windshield...hahaha! My opinion, the shield is great, but being tinted night rides will be not so pleasant (your thoughts)...and like always FACE...the road.
Barbara wants a WS for her scout also. I dont think its practical to do any kind of miles without one, but then again there are lots of people that do.
You seem to enjoy the stage 3 kit installed in your bike. I have a chieftain 2019 and I have had issues with it. I have it at a different shop and hope they can find out what the issue is. Wish me luck.
@@TwoIndians I have had the bike about a year and a half. When I purchased the bike I didn’t even ride the bike until the stage 3 was installed. It has not run right from day one. The day I picked it up, I started the bike and revved it up and it cut off. I was told that I had to put some miles on it. When I start the bike, it might take 4 or 5 times before it will continue to run. Bottom line is, it just does not run right. I have had it cut off leaving the shops parking lot.
You need to find a shop that can get it professionally tuned. I would do this quickly before you score permanent burn holes on your piston. The only thing worse than running a motorcycle lean is running it way out of time.
That's nuts! (sorry took so long to reply). So i have two suggestions. #1 Go back to the shop and tell them it's not right, youre not happy and you want it fixed. # 2 if it doesnt get fixed, ask for the the Indian Rep's phone number (they have to give it to you) and #3 also call Indian support, they are super responsive. Seriously. Don;t let this sit. Put it on them to fix it! I would not stand for it. Stay in touch and let me know what happens!
Would love to replace my screen with a lipped one, But not sure there available this side of the pond "where it + 8c so not wearing shorts here😒" Stay Safe
She also has a freedom shield. Light tint, don’t remember the exact height but I believe it’s 2 inches taller than the stock shield. Thanks for watching!
Lessoning to all your crap but not about the windshield. Alot of people do this. It's like calling a business 6 hours of computer crap before you get to the point
LOL, welcome to RU-vid my friend. Information and entertainment! Plus, it’s free! No extra charge for the crap! Thanks for watching and don’t forget to subscribe!
I’ve experimented with a few options and it’s fine line between loving the sound and damaging your hearing. If you’re just changing the slip ons I’d spend a some time trying to listen to what other people have and not rush into it. Bassani has one of the best options but I couldn’t tell you what it’s called.
