Betaflight Setup on Firefly Baby Nano 1.6" v2 (HDZERO, WALKSNAIL, AND ANALOG)

Подписаться 332 тыс.

Просмотров 19 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
00:00:00 - Let's set up the Flywoo Nano 1S 1.6"
00:01:02 - DC vs. FR what does it mean
00:01:42 - New battery connector?
00:02:21 - Binding the ELRS receiver
Easiest Way To Flash and Bind ExpressLRS - • Easiest Way To Flash a...
00:03:33 - Confirm channel map and endpoints
00:04:12 - Set up aux modes
How to set up aux modes - • 2022 Freestyle FPV Dro...
How to make your own Betaflight Presets Repo - • How to create your own...
00:04:52 - Is the built-in receiver SPI or serial?
SPI-based ExpressLRS receivers are the worst - + • SPI-based ExpressLRS r...
00:05:26 - Update HDZero Firmware
More about the fan I use to keep my vTX cool while flashing - • My secret to preventin...
00:07:04 - Bind Walksnail to Goggles and update Firmware
00:08:43 - Have I earned your support yet?
00:10:09 - Enable HD OSD Canvas

Опубликовано:

4 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@gqp4800 10 месяцев назад

Thanks for showing all steps for us old and computer illiterate . Helps more than you know.😊

@sunsetpark_fpv 10 месяцев назад

Ahhh JB I am so jealous! I wanted to order one of these little guys but current employment status won't allow that. They look like so much fun! Great job.

@AHeadC 10 месяцев назад

I love a good nano, really enjoy my Baby Nazgul.

@Braincho 9 месяцев назад

Hi Josh. Thanks for the guides/tutorials.

@edgarreyes4815 10 месяцев назад

Those look fun to fly!

@MCsCreations 10 месяцев назад

Fantastic! Thanks for all the tips, Joshua! 😃 Stay safe there with your family! 🖖😊

@iblackfeathers 10 месяцев назад

too bad in real life you can't say something like "i don't like old pizza that needs to be microwaved. why? i'll leave that in a video description down below."😂

@CorruptName1 7 месяцев назад

I built a 2S naked vista one of these. Very awesome. One of my fav drones.

@M0nkphish 10 месяцев назад

super fun video JB! ended up getting one thanks to you. anybody else running into repeated high core temperature warnings? seems to be running just fine. contemplating just turning the warning off LOL

@dima_nesterov17 10 месяцев назад

Thanks for your job !

@SQuiDFPV 10 месяцев назад

to fix the OSD, in the Video Format - click the HD button on, then back to AUTO, then back to HD and it will fix it up.

@DavidReynolds-kr6yh 10 месяцев назад

I learnt something today, specifically that not all manufacturers have the ability to set everything up correctly from the start lol. Oh well, good to know that there are fixes available for these little foibles.

@1Samuel1524 6 месяцев назад

I got the elrs HDzero x frame on the way. I can't stop checking for shipping updates.

@zacharysmith9743 10 месяцев назад

Will a betafpv radiolite controller bind to the nano baby, because I'm having a heck of a time trying to bind.

@4brigger 10 месяцев назад

Could you do one of these review/setup videos for the geprc cinelog35 v2 with the 03 air unit? They ship with M8 gps units but i asked them and they confirmed if you order one without the gps they will install an M10 (even one with the compass and altimeter) if you buy one from them. They recommend a 6S 1300mah, and seeing as how thats intended for use with a gopro, I figured I'd get a 2000mah bat since the 03 is the only camera I'm intending to have on board and the larger bat is a few grams off the weight of a gopro. Thanks JB.

@FinFpv 10 месяцев назад

Anyone watch these videos even tho you don’t need to you just want to watch bardwell :)

@andrewdecavia7553 10 месяцев назад

any chance you'd compare this to the FPVCycle Babytooth? Been wanting to build one of those, but it's been out of stock since i've become aware of it. Just hoping to find out how this compares to that and decide if it's worth waiting or just get an analog one of these.

@denkez6010 10 месяцев назад

такой довольный в начале видео =D аж купить захотелось🙂

@tkofpv131 10 месяцев назад

Do you have to power up this hd zero vtx? Never had to do it for the other ones.

@Krizqz0 10 месяцев назад

i just bought one of these but i only have ph2.0 batteries and don't feel like waiting another 2.5 weeks for batteries and charger should it still be fine if i solder a new connector?

@Braincho 9 месяцев назад

Help please! I got Flywoo 1.6" and Radiomaster Boxer. I did flash Boxer with EdgeTX and ELRS and adjusted Models. On the drone flashed ELRS and binded RX to TX, also added arm/disarm switch and air/horizon switch. Everything looks working - drone does arm/disarm, but when i tilt the drone slightly(without props - just tested on the bench) motors start to spin faster and/or slower and if tilt bit more - it disarms. Also when i throttle up and motors start to spin faster and get themselves fixed in a constant high speed and the trottle gimbal doesn't affect it anymore(not working) - the disarm switch still works. Could you help me please? What can i do to fix it?

@qstar5070 10 месяцев назад

aaaaahhhhhhhh I want one!!!!!

@DivisionRc 10 месяцев назад

Mine when connected came with unknown firmware rev had to ask elrs devs lol and flashed through BF passthrough just incase. Working fine. Flew today and had a prop fly off 20 seconds into flight. I think after 50+ flights they worn out lol

@jerridok2708 9 месяцев назад

hey my elrs firmware was unknown aswell so what target/ firmware did you flash?

@not-alot-of-options 9 месяцев назад

My Flywoo Firefly Nano 1s has randomly stopped working. The motors twitch when the battery is connected, getting the "one two three....... fouuuur" beeps. But no throttle response even after arming. No motor response from Betaflight either. I'm out of ideas without spending money. I went to try and order some replacement motors for it "ROBO RB 0802.4 16500KV" but they're out of stock everywhere and aren't even listed on the Flywoo website. Please help. I'm permanently grounded for the foreseeable future.

@thomasbucher6741 10 месяцев назад

Hi all I just bought the following: - Firefly 1S DC16 Nano Baby Quad HDZero V2.0 BNF ELRS 2.4G Drone - HDZero Goggle - X-AIR 5.8 MK II pair for HDzero goggles - LHCP, Combo stubby Now i try to find out, want kind of Antenna there will be on the Drone. Do i need to buy "some" antenna for the Drone as well? I did not find anything about that. I just read stuff about Right and Left antennas, and i ordered a Left for the Googles, but there was no option when i bought the drone... Can anyone "point" me at a hint? Tank you

@kingfpv1959 10 месяцев назад

I would love one

@edcbabc 10 месяцев назад

I'm led to believe the GNB27 connector is not compatible with BT 2.0, but the A30 connector that GNB can also supply on some battery types, is. Not tried it myself.

@JoshuaBardwell 10 месяцев назад

The a30 can plug into bt2.0. There is a little tab but it just sticks in.

@gqp4800 10 месяцев назад

They have freaking real quad cars in California doing faa testing. First people drone in commercial flight

@anonymous_real 5 месяцев назад

Hello man, sorry for bothering, but i have one genuine question. This A30 connector fits with my BT2.0 battery, but.....is it safe? Thanks man, god bless

@JoshuaBardwell 5 месяцев назад

Yes.

@caturlifelive 10 месяцев назад

Watching time

@Kitchencrittergaming 10 месяцев назад

Hey i have the charger that comes with the emax ez pilot pro, and when i plug it in i get really hot and the lights stay green, and i dont know what to do.

@JonR35 10 месяцев назад

Is it on the right setting. Some say hv or lipo switch iirc

@Kitchencrittergaming 10 месяцев назад

@@JonR35 I figured it out, my charger just gets hot, but if i leave it the lights turn off and everything is fine.

@JonR35 10 месяцев назад

Hey, I live in West Knox, would it be possible to meet and have you dial in my 4in quad somewhat. I'll give you $100 or however much. Thanks!

@Jason-db1dy 10 месяцев назад

Why at 13:53 the osd is showing 6s 23.4 volts. That’s odd

@JoshuaBardwell 10 месяцев назад

That's the goggle OSD. The goggle is powered from 6s.

@HendrixFreakazoid 10 месяцев назад

These Flywoos look like some supreme little 1s rippers for sure it's awful hard to keep my wallet on lock down what's your shirt Project Mockingbird?

@dawgunit1953 9 месяцев назад

How do I get the firefly 1S FR Nano to bind mode. Can you help me please

@dawgunit1953 9 месяцев назад

Did come with instructions just says not to update anything just bind n fly

@JoshuaBardwell 9 месяцев назад

I show every step in this video right? What's missing?

@abracadaver7687 10 месяцев назад

300$ 🥲🥲🥲🥲

@Ben-G-FPV 10 месяцев назад

First lol

@Warchild-Media 10 месяцев назад

I COULD FLY THAT LITTLE THING.............ZINGGGGGG......JUST BURN MY FC MOB7......2 YEARS RUNNING😪😪😪

@scu-dub 10 месяцев назад

I'm looking for a lil micro ripper and I missed out on the v1.2 firefly nano baby 40mm😢 that was an awesome lil ripper with 10min flight times spanking it! I can't find it anywhere so this looks like a must🤌🏼