BetaFPV F4 FC's for whoops with ExpressLRS SPI RX's. Supplied by BetaFPV

Подписаться 25 тыс.

Просмотров 6 тыс.

50% 1

I've had a lot of whoops with d8 compatible SPI receivers on, and it's very convenient, but the range is really REALLY bad. BetaFPV has just bought out some F4 board with ExpressLRS SPI receivers on board. We need to test these and see how the range holds up!
These flight controllers were kindly supplied by BetaFPV for review, so please consider using these (affiliate) links to check out the products in more detail -
1S 5A FC - betafpv.com/collections/brush...
1-2S 12A FC - betafpv.com/collections/brush...
You can also find the updated versions of the quad I used (with the ELRS FC's pre-installed) here -
Meteor 65 - betafpv.com/collections/meteo...
Meteor 85 - betafpv.com/collections/meteo...
If you liked this video and want to show your support please feel free to join my Patreon supporters here / currykitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it www.banggood.com/?p=E81211714...
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here www.currykitten.co.uk/support-me/

Опубликовано:

4 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@bigg1smalls 2 года назад

I ordered the 12a one yesterday to use in a Shark Byte 2s toothpick. I am happy with the range compared to the spi D8 and D16. Good bye Frsky.

@edcbabc

This is old now, but a bit of information that might be useful to some users.

@ched999uk 2 года назад

ELRS really does seem the perfect solution to range issues with spi D8 rx.

@kenfeagin9803 2 года назад

Thank you!! Just spent two hours trying to bind my first ELRS BetaFPV85 X Pro. The "ELRS Binding Phrase to UID Bytes" did the trick.

@MCsCreations 2 года назад

Awesome flying and review, Wayne! 😃

@junkthe

17:20

@JyeSmith 2 года назад

In the new BF Configurator there is a Bind button in the receiver tab. Easiest method to use

@pgabrieli 2 года назад

for your props on the 85, use dental floss, mr. shutterbug has a video on that. or was it nick burns? one or the other 😊

@EnglishTurbines 2 года назад

Hi Wayne, are you going to cover the standard JR bay ELRS Module at some point?...Or have I missed it?...🤔😳🇬🇧

@shaneintegra 2 года назад

Xt30 is 10g more than a GNB27 and doesn't offer much of anything on 2s compared to the GNB27. Just an FYI (even though I'm sure your already aware)

@suyash2587 2 года назад

Did you get the Type-C connector with the board or you got it separately from betafpv. It is not mentioned in the parts list of the 1s 12 amp ELRS V.2 flight controller.

@fandi1021 Год назад

Hi, I had problem with my betafpv F4 aio 12a, i flash the ESC with Z_H_30_rev16_7.hex but all motor not spinning, can you tell me for the original ESC target? Thankyou

@dalewhitmore143 2 года назад

i have tried your way to bind to my beta fpv meteor 75 elrs and i cant get it to bind, been trying for 4 hrs

@dreamweaver5869 2 года назад

Can ELRS be used with an older flight controller, like an F3? I’m a newer pilot and I’m trying to understand 🤔 Does the flight controller have to be running Betaflight 4.3 or higher?

@f0xvibes Год назад

I own one of these new 1-2s from betafpv. Does anyone have tried 2s HV?

@funnymartenvideo 2 года назад

Hey, new pilot here. I have a Beta65S Lite Micro Whoop Quadcopter but it is flashed with the wrong firmware. I read I need Betaflight MATEKF411RX 3.4.0 for F4 Brushless FC (SPI Frsky RX) but I only see new versions of this firmware. What should I do? I have a frsky taranis X9D -plus.

@chrisbee5481 2 года назад

Hi, how has the 12a elrs FC held up? Any good on a high power setup?

@SantaCruzCowboy 2 года назад

I punched a flywoo 1s with ELRS ..what transmitter do I need? This is for practice for my DJI fpv..can anyone tell any tx I can purchase so I can fly it?