DIY - Build a Micro Racing FPV Drone for $120 / in 2023

Подписаться 2,1 тыс.

Просмотров 22 тыс.

50% 1

Sorry about the bad audio, my dining room is very echoey… If you want to build this yourself, I will list the part list here.
Flight Controller - betafpv.com/products/f4-1s-5a...
VTX - betafpv.com/products/m03-25-3...
Camera - betafpv.com/products/c03-fpv-...
Frame - betafpv.com/products/meteor65...
Motors - newbeedrone.com/products/newb...
SHOUT OUT to my Sponsors:
newbeedrone.com TINY WHOOP's
www.ampow.com LIPO's
www.foxeer.com FPV CAMERA's
www.gemfanhobby.com PROP's
shop.iflight-rc.com MOTOR's

Спорт

Опубликовано:

15 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@andreisopon4615 3 месяца назад

Christ, I was able to build my first analogue 5" quad in 2019 for $100 😂

@wynnfpv 2 месяца назад

Yeah, to bad prices aren’t cheaper on these little whoops…

@grox3857 3 месяца назад

Goood build, and excellent work with video :)

@wynnfpv 3 месяца назад

Thanks man 😊

@chrisB_OG Месяц назад

OH YES that frame choice

@wynnfpv Месяц назад

Love there frames!

@The2xWhiskey Год назад

This a good assembly guide. Good work. When you're ready for some higher performance, give CiottiFPV's formula for the "Ultimate Freestyle Rig" a shot. The performance of Tiny Whoop 0702 26,000Kv motors with bi-bladed props will blow your mind.

@wynnfpv Год назад

Thanks! I would totally agree for anyone wanting higher performance go with a higher kv!

@dirtymcstinky1656 Год назад

Ultimate is a bit subjective really. I would say this is a good build.

@wynnfpv Год назад

Maybe I should change the verbiage haha

@wynnfpv Год назад

I switched the title. I didn’t want it to be misleading.

@dirtymcstinky1656 Год назад

Legend! Thank you for listening and for the great content 👍

@playmatee1 Месяц назад

the camera has 3 pads coresponding and the vtx also ( better to swap the vtx they die to tbs v1.1 nano ) the small cables break after many crashes. also place something between the fc and vtx . no touching. solder motors. use ultra strong clear double sided tape to mount on the bottom and make ur own antenna perfect lengt, it's safe between the fc canopy and battery the antenna cross the vtx and go back to press the battery 90 degree between the ducts on the left or right side

@wynnfpv 5 дней назад

All great ideas! Thanks for sharing!👊🏼

@masonreyes1731 5 месяцев назад

Can you make a video on how to bind the tiny whoop

@wynnfpv 5 месяцев назад

Hey, thanks for the comment and watching. I will work on making a follow up binding video.

@JackalFPV Год назад

Why the 18000KV and why not BetaFPV motors? ☝️😉 And why is it ultimate? Regardless good video making and soldering.

@wynnfpv Год назад

Haha because it’s what I have on hand! I think 18,000kv is a good kv for people starting out because they wouldn’t be pushing it that much.

@wynnfpv Год назад

Thanks for watching!

@elroytan2851 Год назад

Why did you use betafpv parts if you never tested them out before?? Also, I use betafpv and don't have a problem it them but I heard they have a quality issue??? Did you find any quality issues when testing?

@wynnfpv Год назад

I wanted to try other brands and products to compare them to what I usually fly. I changed the title because I didn’t want to be misleading without testing them long term.

@wynnfpv Год назад

So far it’s been flying great and I really enjoyed it!

@iftikharguliyev 6 месяцев назад

Hello what is the flight time and can i connect to board external elrs module

@wynnfpv 6 месяцев назад

Yes it should connect to the elrs module. Depending on how hard you run it but around 2min to 2min 30sec

@artempeshkov7489 4 месяца назад

Why not to buy rtf set for same or less? Same BetaFPV meteor 65 for 105$?

@wynnfpv 4 месяца назад

The only reason to build this one would be choosing different motors than from BetaFPV. I’m getting ready to make an updated one which will be an easy build for $120, sub 18grams.

@cccagley5276 Год назад

What did it weigh? I would have gone with higher kv for an 'ultimate build.'

@wynnfpv Год назад

Agree, for most beginners I think 18,000 would be a good balanced motor, providing sufficient power and giving good flight times. I’ll have to weigh it and let you know the exact weight.

@wynnfpv Год назад

Exact weight is 21.67

@cold-frontin_penguin7902 8 месяцев назад

how hot do you leave your sauder temp at?

@wynnfpv 8 месяцев назад

I actually leave mine at 750 all the time but you don’t want to hold it there very long at that temp.

@younuskhanj1576 8 месяцев назад

Does it bind to Flysky transmitter???

@wynnfpv 8 месяцев назад

This one is ELRS.

@jpc3874 4 месяца назад

how come some people solder the motors and other plug in?

@wynnfpv 4 месяца назад

Saving the weight of the connector. It’s very minimal but does save some…

@1979zeesh Год назад

i am using F4 1S 5A AIO Brushless Flight Controller from betafpv with betaflight 4.3.0_BETAFPVF411 fw. left rear motor (motor3) doesnt spin when I do motor testing with 1s lipo connected. BETAFPV 1102 18000kv motors. 1. connected working motor to esc of motor 3, result: motor didnt spin 2. connected not working working motor to working esc, result: motor worked it happened to my 1st board betafpv sent me replacement board and same behavior. am i doing something wrong?

@wynnfpv 11 месяцев назад

Interesting, sounds like a defective board. I would swap the motor to double check but I would say defective fc maybe.

@1979zeesh 11 месяцев назад

@@wynnfpv motor swapping shows same behavior. This is the replacement baord i got from them. Same esc# showing same behavior

@wynnfpv 11 месяцев назад

@@1979zeesh I would reach out to them and let them know because it sounds like you got two bad boards…

@lt.cloptin4128 9 месяцев назад

This is happening to me! My right rear motor spins at 2,000 rpm max while all others sit comfortable at 38-40k rpm Did I get a bad board? What did you do? Did the third board stay good?

@1979zeesh 9 месяцев назад

@@lt.cloptin4128 i threw all boards and said bbye to betafpv forever