Тёмный

BetaFPV LiteRadio 2 SE Radio Instructions Set-Up 

Datfpv
Подписаться 10 тыс.
Просмотров 33 тыс.
50% 1

BetaFPV LiteRadio 2 SE Radio Instructions Set-Up
this is the latest 'SE' version - FRSKY
Support DATfpv for all his hard work:
www.buymeacoffee.com/datfpv
www.paypal.com/donate?hosted_...
paypal.me/datfpv
instagram: / datfpv
facebook: / datfpv
twitter: / datfpv
Join my Channel: / @datfpv
LiteRadio 2 SE Radio Transmitter is the upgraded version based on LiteRadio 2 and comes with huge improvements.
Built-in 1000 mAh 1S battery, LiteRadio 2 SE increases the endurance to 8 hours.
Updates with BETAFPV self-developed LiteRadio System. Pilots can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter.
Supports the Frsky / Futaba / Bayang, pilots can easily change Futaba, Frsky D8, Frsky FCC D16 and Frsky LBT D16 mode via the radio transmitter.
Comes with 100mW transmitting power, LiteRadio 2 SE brings a wider operating range.
LiteRadio 2 SE upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
Equipped with a built-in 1000 mAh 1S battery, LiteRadio 2 SE can use up to 8 hours, bringing an excellent endurance performance.
Comes with a built-in charging module, LiteRadio 2 SE can support USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged(when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly.
Compared with the LiteRadio 2, LiteRadio 2 SE has a larger transmitting power that can reach 100mW, bringing a wider operating range.
Adopted the rubber coat, LiteRadio 2 SE is ergonomic and has the shape of a gaming controller. It's comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
This radio transmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.
LiteRadio 2 SE transmitter has been equipped on the Ready-to-Fly FPV whoop racing advanced kit 2 and FPV whoop racing starter kit 2. It is one of the easiest ways to get into the hobby.
Specification
Item: LiteRadio 2 SE
Color: White
Frequency Range: 2.4G (2403MHz-2447MHz)
2.4G System: NRF24L01 or CC2500
Channel: 8
Support Protocol: Bayang / Futaba S-FHSS / Frsky FCC D16/ Frsky LBT D16 / Frsky D8
Power: ≤100mw
Adapted Drone Type: Multirotor
Support USB Charging / Firmware Update
Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
Battery: Built-in 1000mAh 1S Battery
Charging Connector: TypeC
Team BlackSheep has redefined the portable remote control with the TBS Tango 2. Now we're back with one of the most popular requests: a compact full-size remote! The TBS Mambo follows in the footsteps, but focuses on all of the things the Tango 2 tries not to have: a larger screen, traditional form factor with switches and potentiometers, JR module bay, replaceable batteries and trim buttons!
The TBS Tracer (XF) system is a R/C link system made for FPV enthusiasts. It features unheard of latency and performance without any of the clutter of choosing RF modes, link profiles. It just works. Two-way communications includes telemetry functionality and support for 3rd party autopilots.
The DJI FPV Goggles V2 with DJI O3 image transmission features high definition, low latency, long-distance transmission, and strong anti-interference capabilities. The DJI FPV Goggles Battery in the box supports up to 110 minutes of flight when fully charged.
High definition, low latency, long-distance transmission, and strong anti-interference. Battery in the box supports 110 minutes of flight when fully charged.
FPV
FPV, has revolutionized the radio control hobby. By definition, it is a method used to control an unmanned aerial vehicle (UAV) or radio-controlled vehicle from the driver or pilot's perspective. ... A live FPV system makes precise aerial photography and videography possible.#TBS #TBSmambo #TBStango2 #fpv #derbyfpv #impulseRC

Опубликовано:

 

24 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 139   
@neilimixammaximilien8402
@neilimixammaximilien8402 8 месяцев назад
You just saved my day, my drone wasn’t functioning, and after 5 hours of hard research I repaired it thanks of your video, have a nice day
@Atvlife1
@Atvlife1 5 месяцев назад
Thank you so much I was worried that I got the wrong remote because I could not get it in d8 thanks man
@techFPV5964
@techFPV5964 4 месяца назад
Hey there i just received my very first BETAFPV Meteor85 Frsky whoop quad and i purchased the Betafpv LiteRadio SE Controller as well so thanks for this video which really simplifies the binding process..Thanks again mate!!
@daryoushborja5115
@daryoushborja5115 3 года назад
Thank you so much. You don't even know how much that helped.
@Datfpv
@Datfpv 3 года назад
Glad I could help! remember to subscribe, thanks
@techFPV5964
@techFPV5964 4 месяца назад
Thanks for helping me to setup my controller step by step!!
@alihaq1420
@alihaq1420 11 месяцев назад
Has anyone acknowledged the smooth dance moves at the end.... super talented 👏
@Akceptor
@Akceptor Год назад
Awesome! Just got mine working :) Thanks!
@BabaSlap
@BabaSlap 3 года назад
I Love you with all my heart brother
@Datfpv
@Datfpv 3 года назад
Happy to help
@Caleb_Cuffe
@Caleb_Cuffe Год назад
Legendary, thank you for the help!
@Datfpv
@Datfpv Год назад
Glad it helped! no worreies!
@HomeDronen
@HomeDronen 3 года назад
I could use a compact radio to always carry around with me on short trips to a grocery store or something...not bad of a radio. 🤣👍
@tommypoteat9433
@tommypoteat9433 Месяц назад
man your the best
@vision3038
@vision3038 2 года назад
you hard rock intro gave my grandpa a seizure.
@Datfpv
@Datfpv 2 года назад
lol
@scooteralvarez
@scooteralvarez 2 года назад
THX, Super movie. Simple translation. I recommend.
@Datfpv
@Datfpv 2 года назад
hope it all helped you out
@diggsit69
@diggsit69 2 года назад
I have this betaFPV SE, version, when I had to bind it up again to my Hawk Pro I thought you needed to push the setup button an power button to change the protocol an then to bind it back up an when I started flying my Hawk Pro it was in angle mode but it was acting like it was in Acro an not very stable what do I do to get it back to normal? I just tired calibrating the sticks to see if it helps, any ideas on what I need to do?
@voodoosocks8439
@voodoosocks8439 2 года назад
Do you know if the gimbals for the SE version will fit in the original LiteRadio 2? All the replacement gimbals I can find say they're for the SE version and the 3rd version.
@Dougie1664
@Dougie1664 2 года назад
Hi I followed your guide, i guess i am slow on the uptake and new to this FPV that arent RTF I have the BETAFPV LiteRadio SE and BETA65S Frsky 1S brushless with F4 SPI Frsky FC M01 AIO Camera. I cant get it to bind where can i post vids and maybe get assistance please?
@NikCification
@NikCification Год назад
Hi mate. Just a quick question... I am unable to get this controller to work with my PC. The controller has been working absolutely fine to the Cetus Tinywhoop, but I am now trying to connect it to the PC to use the sims... My PC recognises the device, and I am able to see it under my "Device Manager", and also in my Hardware and Sound settings... The computer says that the controller is "OK" ... But for some reason, the Orqa fpv.skylite is not recognising it? When I click "Calbirate", it does nothing... How do I set this up with my PC? Thank you in advanced!
@rcsbyrich3035
@rcsbyrich3035 2 года назад
Hi. Can ask of this se version can bind to the geprc tinygo wich is also futaba protocol, it all gets a little confusing with what can and can't. Watching your videos on this product has helped me soooo much thanks
@Revelation1177
@Revelation1177 2 года назад
Does it work on the tinygo?
@techFPV5964
@techFPV5964 4 месяца назад
What i just found out is if you go into Betafpv Configurator and press the controller model and in my case its cc2500 and click on the yellow button to connect with controller. Once there at the top left corner you'll see the Protocol your transmitter is in so mine was in Frsky D8 and i changed it to Frsky D16..Here you can make sure your sticks are responding correctly by viewing the channels Thro,Yaw,Pitch and role. The Betafpv configurator is very helpful, just don't change anything unless your certain..
@different_From_Yesterday
@different_From_Yesterday 6 месяцев назад
i got the betafpv literadio 3 but the problem was throttle was on right side and seller can't change. is it possible to change the throttle side from right to left?
@techFPV5964
@techFPV5964 4 месяца назад
Hi DatFpv i have an issue where my Meteor85 will not arm..The controller protocol is set at D16 with one flash..I also checked the quad in Betafpv configurator and all switches are active and it says D16 receiver..I binded the quad with the controller and i get a slow green light on the FC .So the protocol is correct and the quad is on d16 but it just won't arm..In Betaflight on the receiver tab i do not see the rcvr channels Thro,yaw etc does not move upon moving the arm switch..I don't know what im doing wrong can you help me?
@umilitari
@umilitari 3 года назад
tyyyyyyyyy bro
@Datfpv
@Datfpv 3 года назад
hope it helped
@urieljanota
@urieljanota Год назад
Hi, my betafpv is the same yours, but, only 1 light or 3 lights flashing. I bought ELRS 2.4gb and I dont know how to bind with my drone. Can you help me bind?
@tygger420
@tygger420 3 года назад
So after I bind to say the freestyle 2 ,Everything is already setup for me I mean acro horizon and stable mode on one of the switches.I have a jumper t8sg plus and I've always had to setup everything.
@Datfpv
@Datfpv 3 года назад
the controller has no where to set up switches and comes ready to go!
@alexfreeland292
@alexfreeland292 Год назад
Do you know if you can connect it to the betafpv Cetus x
@sochirohonda2747
@sochirohonda2747 Год назад
Hi I'm trying to bind a betafpv lite radio 2 to an emax tinyhawk 2 and I can't seem to get it. I followed the instructions multiple times, recalibrated, etc. After I do the vine procedure it just goes back to blinking the red light with the constant blue light and if I push the right shoulder switch down it will beep several times. That's all I can get out of it. Any ideas? Both pieces are brand new from Amazon.
@arnie_the_man8820
@arnie_the_man8820 Год назад
I had the same problem
@Abzero-mx2pb
@Abzero-mx2pb 11 месяцев назад
so, mine does flash when holding down bind when its off
@ThePaololekai
@ThePaololekai 3 года назад
my controller won't beep during setup so I can't get it to calibrate. My controller currently has unpredictable lower throw of the throttle and was hoping this might fix it as I have only used my Adv Kit 2 3-4 times and am out of warranty. Thanks
@transitionfpv6707
@transitionfpv6707 3 года назад
The advance comes with lite radio but the first one not SE LITE 2
@yttwo3887
@yttwo3887 2 года назад
My controller betafpv cannot working in liftoff, i play in windows 11, but its work on diff simulator, can you help me?
@herphermits
@herphermits 2 года назад
Hello again! I just received my Tyro 79 & Eachines Lite Radio package today (25th Oct. 2021), plugged a battery and flew it around. Then i decided to bind the drone to my Jumper T-Lite JP4N1 controller and flew it around too. Now when i tried it back using the Eachines Lite Radio controller that came with the drone, it doesn't work anymore. Somehow, it got unbinded to the drone. Can you please help me bind them back together, the Tyro79 drone to the Eachines Lite Radio controller? My Lite Radio is flashing red 2x when i turn it on (i guess it's on D16 mode). Also my controller is colored white with a built-in battery and has the Eachine brand on it instead of the BetaFPV one.
@Datfpv
@Datfpv 2 года назад
you can't have 2 controllers bound to one quad, the process should be similar to the jumper that you did... press the button on the receiver in the quad and bind the controller.
@herphermits
@herphermits 2 года назад
@@Datfpv Which should i press 1st when doing the bind, the bind on the controller or the bind on the drone? And lastly sir, how many red blinky lights should i set the controller on (1blink, 2blink, 3blink, 4blink)? Thanks for your help.
@tygger420
@tygger420 3 года назад
Flight modes and turtle mode is already setup on the switches correct arm flight modes turtle mode? Like I said only radio I've had is jumper t8sg plus and I'm tired of setting up everything myself
@Datfpv
@Datfpv 3 года назад
yes the radio has no where to set up switches and comes ready to go,
@poralma5394
@poralma5394 3 года назад
Just want to clarify if the Bayang protocol would be shared on the Frsky FCC D16? I am a beginner, thank you! (I own the LiteRadio 2 SE FrSky version Mode 2)
@Datfpv
@Datfpv 3 года назад
no mate - bayang is a type of reciever anf frsky is a type of reciever, they are made by 2 seperate compnies. you need a quad with a frsky reciever in it if you have the frsky controller.
@poralma5394
@poralma5394 3 года назад
@@Datfpv I appreciate your time! This helped a lot.
@starkethomas6132
@starkethomas6132 4 месяца назад
Please how do I arm it to my meteor 75 pro
@grahammaclean5024
@grahammaclean5024 3 года назад
Hi. I live in New Zealand & I have a Literadio 2 SE. I want to buy the new BetaFPV Pavo30 Whoop which they offer in Frsky FCC, Frsky LBT and Futaba but don't know why version to buy. Can you help advise please?
@Datfpv
@Datfpv 3 года назад
Hi - the se radio covers all of these, but depends what part of the world you fly in, thats what the code are about, LBT europe, FCC rest of the world. But that said the radio covers all of these, go for a FRSKY version.
@rockstartravel7421
@rockstartravel7421 Год назад
Hello. I have Literadio 2SE for summulator LifToff, But I cannot add my joystick! Can you help me! My game Liftoff not see joystick.
@volocify
@volocify 2 года назад
my drone is connected and binded to this controller but its not flying how do i fix this?
@glytch5
@glytch5 2 года назад
I'm a nube and I have this coming... obviously this does not have a screen on it, so how do you configure what the controls are going to do on your drone you bind it to?
@Datfpv
@Datfpv 2 года назад
the controller switches and suff are already pre-set, you change them in betaflight, you should be using betaflight to configure how your quad flies, and also set your rates and control switches.
@1UniqueThinker
@1UniqueThinker 3 года назад
is there a hard reset on these controllers? while charging a red light is on, but when off of charger, wont power on. thoughts?
@caydencobb9973
@caydencobb9973 Год назад
Ever figure it out?
@thegoodlifeSO
@thegoodlifeSO 4 месяца назад
Can this be connected to DJI drones?
@jonharris3476
@jonharris3476 3 года назад
I just had a LiteRadio 2 SE and 65s Lite arrive as my 1st drone and intro to FPV. I can't get teh transmitter to cycle through the modes or bind with drone... I can set it up and use it as a controller on the DRL sim...
@heer-digital
@heer-digital 3 года назад
The lite radio SE has 2 versions, frsky and bayang, the 65s lite is bayang protocol if you bought them as a set then you should be able to bind them, if you bought them separately then you may have wrong version of radio for that drone. I have just done it myself so I know. Luckily the 65s can take an external receiver so I ordered a cheap frsky XM plus receiver.
@Datfpv
@Datfpv 3 года назад
what he said!!
@jonharris3476
@jonharris3476 3 года назад
@@heer-digital my order said Bayang...
@heer-digital
@heer-digital 3 года назад
If your radio is bayang then you will not be able to cycle through the modes because there is only one mode, the bayang protocol. Either the radio or the drone may be faulty if you cannot bind the two.
@mryipicayey
@mryipicayey 3 года назад
I cant bid it with meteor 75 little, I put in d8 mode and hit bind buton later but no way , in my previous little radio2 , they bind automatically once was in d8 mode , is something else I need to do ?
@Datfpv
@Datfpv 3 года назад
hey, I have heard that you might need to update the firmware on some of these se versions for the d8 mode to work.
@damnsung
@damnsung 2 года назад
This is a fantastic and super clear tutorial. Thanks so much for this. Do you happen to know how to connect this controller to an M1 Mac. I’ve had no luck so far. Thanks so much. Liked and subscribed.
@Datfpv
@Datfpv 2 года назад
thanks, but don't know about the m1 mac thing!
@damnsung
@damnsung 2 года назад
@@Datfpv thanks anyway. loving the videos.
@eduardosantosmanaus
@eduardosantosmanaus 2 года назад
Plug it into Mac, them press Setup button that it will be recognized, it was this way with Windows
@rcreviews1412
@rcreviews1412 3 года назад
If i connect this to a whoop will the controls already be set?
@Datfpv
@Datfpv 3 года назад
yes the switches are already in place, you may want to change their positions though, and you might need to sort your sticks out, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7ZUe-sC7mmU.html but its all there in place
@janbahar5322
@janbahar5322 2 года назад
hello, can you help me? i have this radio and a frsky xm+ reciever. I can bind it, the light turns green but nothing hapen. thank you verry much
@Datfpv
@Datfpv 2 года назад
hey - follow this - its always this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7ZUe-sC7mmU.html
@jmillerfpv
@jmillerfpv 2 года назад
I bought this and it won’t bind to my frsky xm+ with access on my nazgul5 v2. What should I do? Was thinking just use for sim and buy another
@Datfpv
@Datfpv 2 года назад
I did hear that some of the controllers did need a firmware update - thats worth a try
@jmillerfpv
@jmillerfpv 2 года назад
@@Datfpv I know now that they only bind to the old xm+ receivers. You have to downgrade to a previous firmware version on the new xm +.
@jalousy100k7
@jalousy100k7 4 месяца назад
I’m having a problem where when I turn on the controller it flashes purple instead of red anyone know why
@arnie_the_man8820
@arnie_the_man8820 Год назад
Please help i cant get it to change protocols. The red light won't go from 1 blink to 2 blinks to 3 blinks. Please replie. I am crying so hard and i need help. Please 🙏
@efrenmarinas6443
@efrenmarinas6443 2 года назад
Just bought it for my simulator. but the problem is, it doesnt work on my android phone using freerider sim. And i also tried other simulators but unfortunately cant recognize my controller. Is this BETAFPV literadio 2 SE really works on android phone? . TIA
@kratos2600
@kratos2600 5 месяцев назад
I have the same issue... did you manage to sort yours out?
@Lucas1Apple12
@Lucas1Apple12 3 года назад
I dont know what Im doing wrong, but my controller doesn't flashed with the bind botton.
@Datfpv
@Datfpv 3 года назад
are you sure you have the frsky version of the controller? is it the se version ? do you have a older version?
@transitionfpv6707
@transitionfpv6707 3 года назад
Im triying to bind it to my advance 2 kit [meteor 75] and i cant bind it but the older transmiter still works on it do is that matters
@Datfpv
@Datfpv 3 года назад
no that doesn't matter, I have heard that some se versions need a firmware update and gthey should work fine (also make sure you do have it in d8 mode.
@transitionfpv6707
@transitionfpv6707 3 года назад
@@Datfpv thanks but how i updated it with beta flight?
@Datfpv
@Datfpv 3 года назад
support.betafpv.com/hc/en-us/articles/900005322963-How-to-flash-firmware-of-Literadio-2-SE
@zYJRv2
@zYJRv2 2 года назад
Can the betafpv 75x bind to LiteRadio 2 SE?
@Datfpv
@Datfpv 2 года назад
yes if the quad has a frsky receiver in it.
@zYJRv2
@zYJRv2 2 года назад
@@Datfpv Thank you very much! Video was very helpful as well.
@Raeodor
@Raeodor 3 года назад
How are we supposed to know what the switched on this are supposed to do? Is there anyway of changing them? just bought this remote and and using it on a simulator, thats as far as ive gotten with this so far.
@Datfpv
@Datfpv 3 года назад
Hey - this is a basic controller, and the switches come pre-set, you can however change them in Betaflight - all my controller videos show how to do this and it is no different for this one, the process is really the same for all.
@Raeodor
@Raeodor 3 года назад
@@Datfpv ill have to check out beta flight then, never used it before. You said the switches are preset? The problem is, nowhere in the manual does it say what the switches actually do, like, is one of them an arming or kill switch? I'm guessing one of the 3 channel is a "mode" switch?
@FERNANDOPR_FPV
@FERNANDOPR_FPV 2 года назад
Hi, nice review, this radio can bind with happymodel mobula 6?
@Datfpv
@Datfpv 2 года назад
yes as long as the mob has a frsky receiver in it and you have the frsky version controller
@FERNANDOPR_FPV
@FERNANDOPR_FPV 2 года назад
@@Datfpv ohh great, thanks man
@FlyByWireC
@FlyByWireC 3 года назад
Can this bind to things like a normal receiver?
@Datfpv
@Datfpv 3 года назад
yes of course it can, as long as they are frsky ones... yes
@Anime_Fan6699
@Anime_Fan6699 2 месяца назад
Is it compatible with 1s walksnail drones please i need an answer asap😢
@Datfpv
@Datfpv 2 месяца назад
all depends on the receiver in the drone
@HerbertFPVBrasil
@HerbertFPVBrasil 3 года назад
Google for issues on this controler, im sad, already bought
@samuelburrows3654
@samuelburrows3654 3 года назад
Man i just got the se version and cant seem to pair it with my meteor75 frsky fcc D8.. it just wont start…
@Datfpv
@Datfpv 3 года назад
Some of these I think there was a firmware issue, see if there is a update for it
@samuelburrows3654
@samuelburrows3654 3 года назад
@@Datfpv is there a program for mac? Sorry im new to this
@karl_1965
@karl_1965 3 года назад
Is this the one that comes with the betafpv advanced kit?
@Datfpv
@Datfpv 3 года назад
yes if you get the new kit, there maybe some older kits with the older controller in them... also, looking at betafpv's website, it looks like they are actually discontinuing the advanced kits! - remember to subscribe, thanks
@karl_1965
@karl_1965 3 года назад
@@Datfpv thanks
@herphermits
@herphermits 2 года назад
Are these correct? 1red flash - D16 FCC mode (North America, Asia) 2red flash - D16 LBT mode (EU) 3red flash - D8 mode (for all TinyHawks, TinyWhoops) 4red flash - Futaba mode
@Datfpv
@Datfpv 2 года назад
of course they are correct....
@herphermits
@herphermits 2 года назад
@@Datfpv Thanks... Now i have a hard time binding my Eachine Tyro 79 to the Eachine / BETAFPV Lite Radio. Can you perhaps teach me how? Thanks
@BIRDYFPV130
@BIRDYFPV130 2 месяца назад
I bricked mine and am trying to bring it back. Please help me
@BIRDYFPV130
@BIRDYFPV130 2 месяца назад
It only powers up in set up mode
@user-em5zt1ty9e
@user-em5zt1ty9e Год назад
Здравствуйте. Помогите мне пожалуйста решить проблему. Я купил набор batafpv cetus pro и теперь хочу подключить пульт аппаратуру к симулятору freerider. Но и на телефоне android и на компъютере windows симулятор не видит пульт аппаратуру. Подскажите пожалуйста что мне можно сделать для того чтобы заработало? Заранее спасибо за ответ.
@shastieswar2893
@shastieswar2893 2 года назад
can we connect to beta85 pro 2
@Datfpv
@Datfpv 2 года назад
yes as long as the beta85 pro 2 has a frsky receiver in it (or the compatible futaba one).
@dizhang1944
@dizhang1944 5 дней назад
How much in your company ?
@arpus007
@arpus007 3 года назад
This version supported Bayang protocol too ?
@Datfpv
@Datfpv 3 года назад
no mate :(
@arpus007
@arpus007 3 года назад
In manual i can see Bayang protocol... (??)
@tyc1617
@tyc1617 3 года назад
@@arpus007 can't you buy both versions
@fpv.kid1012
@fpv.kid1012 2 года назад
Yee
@dronesetc9769
@dronesetc9769 2 года назад
watching a few videos on this radio, no one mentions the switches, its like they don't exist. I'm using mission planner really need the switches, stupid config software not working? >
@Datfpv
@Datfpv 2 года назад
as this is a starter controller, the switches come pre-programmed in, you have to bind to a quad, then use betaflight - and the modes tab shows you the switches / what you can do and add in place.
@dronesetc9769
@dronesetc9769 2 года назад
@@Datfpv I'm using ardupilot / mission planner, not betaflight. If I know what the switches are pre set to perhaps I can set them in Mission planner (right now I selected RC6 and RC7 in MP) , If they are already picked why doesn't it tell you somewhere what to set my ARM switch to on the software , kinda crappy design I think. Thanks for the response though
@Datfpv
@Datfpv 2 года назад
you should be able to see what they are in the betafpv config program though - and also if you download the free betaflight program as well.
@dronesetc9769
@dronesetc9769 2 года назад
@@Datfpv I have betaflight, just tried to connect the remote only (not working) this drone I have uses a PX4 FC with Orange Cube on it, this FC won't connect to Betaflight as far as I can tell? therefore can't use betaflight, will probably just us my TX16S radio instead, was try to setup the BetaFpv thing with little success
@platinum_rc8422
@platinum_rc8422 3 года назад
Will it connect to a sim?
@Datfpv
@Datfpv 3 года назад
yes you can use it on a sim.
@purplemike4840
@purplemike4840 3 года назад
Can it work one the eachine novice i?
@Datfpv
@Datfpv 3 года назад
if the eachine has a 'frsky' receiver in it then yes?
@purplemike4840
@purplemike4840 3 года назад
@@Datfpv ok, thanks!
@purplemike4840
@purplemike4840 3 года назад
@@Datfpv Also one last question. Which do you prefer for a beginner? The SE version or the normal one?
@papajoe4750
@papajoe4750 2 года назад
Its a very interesting video but as I'm new to FPV, i don't understand everything: I got a new Beta FPV LiteRadio 2 SE and I cant Bind it to my Betafpv meteor65-lite-brushless: Please I need help: if someone have seen a video on this matter please let me know. Please can you upload a video. Many thanks
@Datfpv
@Datfpv 2 года назад
Hi! - the 65 lite you have.. is it the v2 or the v3 ? - the v2 is a Bayang protocol, and won't bind with the 'frsky' literadio - if thats the radio you have ? - more info mate, thanks specs and what you have ?
@papajoe4750
@papajoe4750 2 года назад
@@Datfpv Hi! I have no idea if it is a v2 or v3! I checked the Specifications and here they are Meteor65 Lite Brushless Whoop Quadcopter FC&ESC: Lite 1S Brushless FC Frame: Meteor65 65mm 1S Brushless Frame Motors:(0802SE) 19500KV Motor Camera: C02 Micro Camera VTX: M01 VTX Receiver: Built-in Frsky D8 Battery: BT2.0 300mAh 1S Battery Canopy: Canopy for Micro Camera Meteor65 Lite drone comes with Lite 1S Brushless Flight Controller , stock classical Silverware Firmware installed. I have a Beta FPV LiteRadio 2 SE. Thanks for your reply and I hope those info can help you. Have a nice weekend.
@Datfpv
@Datfpv 2 года назад
ok so the controller need to be in D8 mode - 3 red flashes as my video shows you. make sure the quad is in bind mode, it maybe straight away... if all fails you might need to update the firmware on the controller, there was a issue with the firmware at some point...
@papajoe4750
@papajoe4750 2 года назад
@@Datfpv Ok, I will try to do as your video says. How do you update the firmware on the controller? its all new to me. thank you 🙂
@Datfpv
@Datfpv 2 года назад
cool - for the firmware you'll have to read the manual betafpv website - I haven't done it myself.
@neilimixammaximilien8402
@neilimixammaximilien8402 8 месяцев назад
You just saved my day, my drone wasn’t functioning, and after 5 hours of hard research I repaired it thanks of your video, have a nice day
Далее
BetaFPV LiteRadio 3 user guide, instructions & Binding
12:35
Lite Radio 2 Range Test: D8 vs D16
11:38
Просмотров 44 тыс.
skibidi toilet multiverse 039 (part 4)
06:06
Просмотров 2,9 млн
How to bind BetaFPV LiteRadio ELRS
11:45
Просмотров 28 тыс.
BETAFPV LiteRadio 2 SE Review 📡
12:47
Просмотров 15 тыс.